Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Taiwo Sesay has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Bio-Based Stabilization of Natural Soil for Rammed Earth Construction: A Review on Mechanical and Water Durability Performance

    by Taiwo Sesay, Yuekai Xie, Yue Chen, Jianfeng Xue

    Rammed earth (RE), despite being an ancient method of construction, has smoothly integrated into contemporary civil engineering due to its compatibility with current sustainability requirements for housing structures. However, typical RE needs some improvements to fully realize its potential as both a structurally effective and environmentally friendly building technique. As a result, multiple bio-inspired enhancement methods have been suggested to substitute traditional cement or lime stabilizers. This review examines the various efforts made in the past decade to biologically stabilize natural soil for the construction of RE. It provides a brief overview of the different bio-based materials utilized in this area but primarily concentrates on their effects on the mechanical strength and water durability of RE structures. The review also addresses current obstacles that prevent the widespread industrial adoption of this valuable earth-building method and identifies potential directions for future research. Overall, the available literature on the mechanical performance and durability of bio-based rammed earth (BRE) shows encouraging outcomes. Nonetheless, various issues, such as the absence of thorough data on the discussed topics, issues related to the inherent properties of soil and biomaterials, and doubts regarding the reliability of durability evaluation methods, have been identified as factors that could lead to a lack of confidence among RE practitioners in adopting bio-based treatments. This study will provide a solid foundation for future researchers aiming to advance BRE technology, thus enhancing sustainability within the construction sector.


  • Open Access

    Valorization of recycled wastes in pavement preventive maintenance: A review on reclaimed asphalt pavement and recycled waste tire

    by Xia Chen, Qiuping Li, Taiwo Sesay, Qinglong You, Ekeoma Bridget Chineche


  • Synthesis and visible-light photocatalytic property of spinel CuAl2O4 for vehicle emissions

    by Zhuohong Cong, Liang Zhou, Nanxiang Zheng, Taiwo Sesay

    Photodegradation of vehicle emissions is a promising approach for dealing with atmospheric pollution in road tunnels. In this research, copper aluminate nanoparticles (CuAl2O4) were prepared by the sol–gel method using copper nitrate, aluminum nitrate, and citric acid as precursor materials. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and UV–Vis spectroscopy to validate their structure, surface morphology, and optical properties, respectively. The XRD and SEM results confirm that the CuAl2O4 powder has a particle size of 20–37 nm and exhibits a spinel-type structure. The upper limit of the stimulation wavelength in the UV–Vis diffuse reflectance spectrum is located at 725 nm with a band gap (Eg) of about 1.50 eV, which is suitable for effective visible-light degradation. Photocatalytic performance of the CuAl2O4 nanoparticles was analyzed by investigating the effects of light source, calcination temperature, and catalyst loading amount on the degradation of vehicle emissions (CO, HC, and NO). Best results were obtained under fluorescent light irradiation by CuAl2O4 nanoparticles calcined at 700 °C. The optimum catalyst amount for decomposing CO, HC, and NO were determined as 0.5 g, 0.5 g, and 2 g, respectively. Overall, the photocatalytic performance study verifies that spinel CuAl2O4 photocatalyst is a valuable material for next-generation technologies aimed at reducing harmful emissions from vehicles.


  • Open Access

    Maximizing the Application of RAP in Asphalt Concrete Pavements and Its Long-Term Performance: A Review

    by Jialin Zhang, Taiwo Sesay, Qinglong You, Hongjun Jing

    The use of recycled asphalt pavement (RAP) materials in asphalt concrete pavements (ACP) brings significant cost and environmental benefits. In practice, however, the amount of RAP readily available far exceeds the amount being utilized in ACPs, which still leaves the problem of excess RAP in the environment partially solved. Additionally, ACPs containing RAP materials (i.e., RAP-ACPs) can still be landfilled after they have reached the end of their useful life, which may restore the original environmental waste problem. To address these, researchers have demonstrated different ways to maximize the application of RAP in ACPs. Among them, the use of RAP in pavement preventive maintenance (PPM) treatments and the repeated recycling of RAP-ACPs (i.e., RnAP) are specifically discussed in this review. It is envisaged that, by promoting these two practices, the application and benefits of RAP can be further maximized to improve sustainability. This review also discusses the long-term behavior of RAP-ACP, which is crucial to inspire confidence in the wider application of RAP in ACP. Studies on RAP-PPM have shown that virgin PPM treatments can successfully accommodate RAP materials by adjusting their mix design. So far, research on RnAP has been limited to how multiple-recycling affects the performance properties of the blends, showing improvements in rutting resistance and moisture susceptibility but little effect on linear viscoelasticity and cracking. Overall, the lack of sufficient research is considered to be the biggest challenge in facilitating the implementation of these two sustainable RAP technologies. Little or nothing is known about the bonding mechanisms between RAP and fresh PPM binders, the molecular and chemical changes in RnAP binders, or the functional performance characteristics, actual pavement performance, and long-term performance of both RAP-PPM and RnAP blends. An understanding of these aspects is very relevant to maximize and continue the beneficial reuse of RAP in ACPs while safeguarding human and environmental health.


  • Open Access

    Biotemplate Replication of Novel Mangifera indica Leaf (MIL) for Atmospheric Water Harvesting: Intrinsic Surface Wettability and Collection Efficiency

    by Edward Hingha Foday Jr, Taiwo Sesay, Emmanuel Bartholomew Koroma, Anthony Amara Golia Seseh Kanneh, Ekeoma Bridget Chineche, Alpha Yayah Jalloh, John Mambu Koroma

    Water shortage has become a global crisis that has posed and still poses a serious threat to the human race, especially in developing countries. Harvesting moisture from the atmosphere is a viable approach to easing the world water crisis due to its ubiquitous nature. Inspired by nature, biotemplate surfaces have been given considerable attention in recent years though these surfaces still suffer from intrinsic trade-offs making replication more challenging. In the design of artificial surfaces, maximizing their full potential and benefits as that of the natural surface is difficult. Here, we conveniently made use of Mangifera indica leaf (MIL) and its replicated surfaces (RMIL) to collect atmosphere water. This research provides a novel insight into the facile replication mechanism of a wettable surface made of Polydimethylsiloxane (PDMS), which has proven useful in collecting atmospheric water. This comparative study shows that biotemplate surfaces (RMIL) with hydrophobic characteristics outperform natural hydrophilic surfaces (DMIL and FMIL) in droplet termination and water collection abilities. Water collection efficiency from the Replicated Mangifera indica leaf (RMIL) surface was shown to be superior to that of the Dry Mangifera indica leaf (DMIL) and Fresh Mangifera indica leaf (FMIL) surfaces. Furthermore, the wettability of the DMIL, FMIL, and RMIL was thoroughly investigated, with the apices playing an important role in droplet roll-off.


  • Open Access

    Three-Tier Computing Platform Optimization: A Deep Reinforcement Learning Approach

    by Chidiebere Sunday Chidume, Solomon Inalegwu Okopi, Taiwo Sesay, Irene Simon Materu, Theophilus Quachie Asenso

    The increasing number of computing platforms is critical with the increasing trend of delay-sensitive complex applications with enormous power consumption. These computing platforms attach themselves to multiple small base stations and macro base stations to optimize system performance if appropriately allocated. The arrival rate of computing tasks is often stochastic under time-varying wireless channel conditions in the mobile edge computing Internet of things (MEC IoT) network, making it challenging to implement an optimal offloading scheme. The user needs to choose the best computing platforms and base stations to minimize the task completion time and consume less power. In addition, the reliability of our system in terms of the number of computing resources (power, CPU cycles) each computing platform consumes to process the users task efficiently needs to be ascertained. This paper implements a computational task offloading scheme to a high-performance processor through a small base station and a collaborative edge device through macro base stations, considering the systems maximum available processing capacity as one of the optimization constraints. We minimized the latency and energy consumption, which constitute the systems total cost, by optimizing the computing platform choice, base stations choice, and resource allocation (computing, communication, power). We use the actor-critic architecture to implement a Markov decision process that depends on deep reinforcement learning (DRL) to solve the models problem. Simulation results showed that our proposed scheme achieves significant long-term rewards in latency and energy costs compared with random search, greedy search, deep Q-learning, and the other schemes that implemented either the local computation or edge computation.