Naomi Helsel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Naomi Helsel has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Pabitra Choudhury
New Mexico Institute of Mining and Technology
8 shared publications - Sanchari Chowdhury
Department of Chemical Engineering New Mexico Tech Socorro NM 87801 USA
2 shared publications Hirithya Sharad Jeyashangararaj
Department of Chemical Engineering, New Mexico Institute of Mining and Technology, Socorro, USA
1 shared publicationKeeniya-Gamalage-Gehan Chaturanga De Silva
Department of Chemistry, New Mexico Institute of Mining and Technology, Socorro, USA
1 shared publicationTahmidul Islam
1 shared publication
Latest Publications
- 23 September 2025
- Published by Elsevier in Molecular Catalysis
- Vol. 587
Facile synthesis of iron phthalocyanine functionalized B-doped graphene composite using a green solvent for superior ORR performance
- 23 September 2025
- Published by Elsevier in Molecular Catalysis
- Vol. 587
Facile synthesis of iron phthalocyanine functionalized B-doped graphene composite using a green solvent for superior ORR performance
- Open Access
Non-Platinum Group Metal Oxygen Reduction Catalysts for a Hydrogen Fuel Cell Cathode: A Mini-Review
Although platinum-based catalysts are highly effective for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells (PEMFCs), their high cost and scarcity limit large-scale commercialization. As a result, platinum group metal-free catalysts—particularly Fe-N-C materials—have received increasing attention as promising alternatives. Despite significant progress, no platinum-group metal-free (PGM-free) catalyst has yet matched the performance and durability of commercial Pt/C in acidic media. Recent advances in synthesis strategies, however, have led to notable improvements in the activity, stability, and active site density of Fe-N-C catalysts. This review highlights key synthesis approaches, including pyrolysis, MOF-derived templates, and cascade anchoring, and discusses how these methods contribute to improved nitrogen coordination, electronic structure modulation, and active site engineering. The continued refinement of these strategies, alongside improved catalyst screening techniques, is essential for closing the performance gap and enabling the practical deployment of non-PGM catalysts in PEMFC technologies.
Open AccessNon-Platinum Group Metal Oxygen Reduction Catalysts for a Hydrogen Fuel Cell Cathode: A Mini-Review
Although platinum-based catalysts are highly effective for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells (PEMFCs), their high cost and scarcity limit large-scale commercialization. As a result, platinum group metal-free catalysts—particularly Fe-N-C materials—have received increasing attention as promising alternatives. Despite significant progress, no platinum-group metal-free (PGM-free) catalyst has yet matched the performance and durability of commercial Pt/C in acidic media. Recent advances in synthesis strategies, however, have led to notable improvements in the activity, stability, and active site density of Fe-N-C catalysts. This review highlights key synthesis approaches, including pyrolysis, MOF-derived templates, and cascade anchoring, and discusses how these methods contribute to improved nitrogen coordination, electronic structure modulation, and active site engineering. The continued refinement of these strategies, alongside improved catalyst screening techniques, is essential for closing the performance gap and enabling the practical deployment of non-PGM catalysts in PEMFC technologies.
- Open Access
Nonprecious Single Atom Catalyst for Methane Pyrolysis
The development of a suitable catalytic system for methane pyrolysis reactions requires a detailed investigation of the activation energy of C-H bonds on catalysts, as well as their stability against sintering and coke formation. In this work, both single-metal Ni atoms and small clusters of Ni atoms deposited on titanium nitride (TiN) plasmonic nanoparticles were characterized for the C-H bond activation of a methane pyrolysis reaction using ab initio spin-polarized density functional theory (DFT) calculations. The present work shows the complete reaction pathway, including energy barriers for C-H bond activation and dehydrogenated fragments, during the methane pyrolysis reaction on catalytic systems. Interestingly, the C-H bond activation barriers were low for both Ni single-atom and Ni-clusters, showing the energy barriers of ~1.10 eV and ~0.88 eV, respectively. Additionally, single-atom Ni-TiN showed weaker binding to adsorbates, and a net endothermic reaction pathway indicated that the single-atom Ni-TiN was expected to resist coke formation on its surface. However, these Ni single-atom catalysts can sinter, aggregate into a small cluster, and form a coke layer from the highly exothermic reaction pathway that the cluster takes despite the facile reaction pathway.
Open AccessNonprecious Single Atom Catalyst for Methane Pyrolysis
The development of a suitable catalytic system for methane pyrolysis reactions requires a detailed investigation of the activation energy of C-H bonds on catalysts, as well as their stability against sintering and coke formation. In this work, both single-metal Ni atoms and small clusters of Ni atoms deposited on titanium nitride (TiN) plasmonic nanoparticles were characterized for the C-H bond activation of a methane pyrolysis reaction using ab initio spin-polarized density functional theory (DFT) calculations. The present work shows the complete reaction pathway, including energy barriers for C-H bond activation and dehydrogenated fragments, during the methane pyrolysis reaction on catalytic systems. Interestingly, the C-H bond activation barriers were low for both Ni single-atom and Ni-clusters, showing the energy barriers of ~1.10 eV and ~0.88 eV, respectively. Additionally, single-atom Ni-TiN showed weaker binding to adsorbates, and a net endothermic reaction pathway indicated that the single-atom Ni-TiN was expected to resist coke formation on its surface. However, these Ni single-atom catalysts can sinter, aggregate into a small cluster, and form a coke layer from the highly exothermic reaction pathway that the cluster takes despite the facile reaction pathway.
- Open Access
- 19 March 2024
- Published by Springer Nature in Discover Nano
- Vol. 19 (1) , 1-13
Plasmon assisted synthesis of TiN-supported single-atom nickel catalysts
We report the deposition of single atom nickel catalyst on refractory plasmonic titanium nitride (TiN) nanomaterials supports using the wet synthesis method under visible light irradiation. TiN nanoparticles efficiently absorb visible light to generate photoexcited electrons and holes. Photoexcited electrons reduce nickel precursor to deposit Ni atoms on TiN nanoparticles’ surface. The generated hot holes are scavenged by the methanol. We studied the Ni deposition on TiN nanoparticles by varying light intensity, light exposure time, and metal precursor concentration. These studies confirmed the photodeposition method is driven by hot electrons and helped us to find optimum synthesis conditions for single atoms deposition. We characterized the nanocatalysts using high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), energy dispersive X-ray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS). We used density functional theory (DFT) calculations to predict favorable deposition sites and aggregation energy of Ni atoms on TiN. Surface defect sites of TiN are most favorable for single nickel atoms depositions. Interestingly, the oxygen sites on native surface oxide layer of TiN also exhibit strong binding with the single Ni atoms. Plasmon enhanced synthesis method can facilitate photodeposition of single atom catalysts on a wide class of metallic supports with plasmonic properties.
- 19 March 2024
- Published by Springer Nature in Discover Nano
- Vol. 19 (1) , 1-13
Open AccessPlasmon assisted synthesis of TiN-supported single-atom nickel catalysts
We report the deposition of single atom nickel catalyst on refractory plasmonic titanium nitride (TiN) nanomaterials supports using the wet synthesis method under visible light irradiation. TiN nanoparticles efficiently absorb visible light to generate photoexcited electrons and holes. Photoexcited electrons reduce nickel precursor to deposit Ni atoms on TiN nanoparticles’ surface. The generated hot holes are scavenged by the methanol. We studied the Ni deposition on TiN nanoparticles by varying light intensity, light exposure time, and metal precursor concentration. These studies confirmed the photodeposition method is driven by hot electrons and helped us to find optimum synthesis conditions for single atoms deposition. We characterized the nanocatalysts using high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), energy dispersive X-ray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS). We used density functional theory (DFT) calculations to predict favorable deposition sites and aggregation energy of Ni atoms on TiN. Surface defect sites of TiN are most favorable for single nickel atoms depositions. Interestingly, the oxygen sites on native surface oxide layer of TiN also exhibit strong binding with the single Ni atoms. Plasmon enhanced synthesis method can facilitate photodeposition of single atom catalysts on a wide class of metallic supports with plasmonic properties.
- 22 January 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 128 (4) , 1663-1668
Cooperative Agreement of Binuclear 2D Metal–Organic Framework Sites for Superior Bifunctional Oxygen Electrocatalysis
- 22 January 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 128 (4) , 1663-1668
Cooperative Agreement of Binuclear 2D Metal–Organic Framework Sites for Superior Bifunctional Oxygen Electrocatalysis
- 2 May 2023
- Published by Elsevier in Molecular Catalysis
- Vol. 545
Investigation of bifunctionality of FePc-functionalized graphene for enhanced ORR/OER activity
- 2 May 2023
- Published by Elsevier in Molecular Catalysis
- Vol. 545
Investigation of bifunctionality of FePc-functionalized graphene for enhanced ORR/OER activity
- Open Access
- 17 February 2023
- Published by Wiley in Advanced Materials Interfaces
- Vol. 10 (9)
Enhancing the Stability of a Pt‐Free ORR Catalyst via Reaction Intermediates
Finding a platinum‐free cathode catalyst that effectively models the oxygen reduction reaction (ORR) of a proton‐exchange membrane (PEM) fuel cell cathode better than the current commercial Pt/C catalyst has been a major shortcoming in fuel cell technology. Overall, a promising platinum‐free cathode catalyst must offer great ORR activity, ORR selectivity, and acid stability. Due to their enticing ORR activity and selectivity to the preferred four‐electron ORR pathway, the possible dissolution reactions and oxygen‐intermediate reactions of iron phthalocyanine monolayer supported on a pristine graphene (GFePc) and boron‐doped graphene substrate (BGFePc) have been studied to determine the stability as a function of potential and pH through spin‐polarized density functional theory (DFT) calculations at both infinitesimally low (10−9 m) and 1 m Fe2+/Fe3+ ionic concentrations. BGFePc offers higher stability in both concentrations than GFePc. In both cases, the oxygen‐intermediates are more stable than the bare catalytic surface due to the metal d‐band center shifting further away from the Fermi level in the valence band state (higher energy of antibonding). Moreover, at an Fe2+ ionic concentration, both catalysts would be stable in the potential and pH regions at the operating conditions of rotating disk electrode (RDE) experiments and PEM fuel cells.
- 17 February 2023
- Published by Wiley in Advanced Materials Interfaces
- Vol. 10 (9)
Open AccessEnhancing the Stability of a Pt‐Free ORR Catalyst via Reaction Intermediates
Finding a platinum‐free cathode catalyst that effectively models the oxygen reduction reaction (ORR) of a proton‐exchange membrane (PEM) fuel cell cathode better than the current commercial Pt/C catalyst has been a major shortcoming in fuel cell technology. Overall, a promising platinum‐free cathode catalyst must offer great ORR activity, ORR selectivity, and acid stability. Due to their enticing ORR activity and selectivity to the preferred four‐electron ORR pathway, the possible dissolution reactions and oxygen‐intermediate reactions of iron phthalocyanine monolayer supported on a pristine graphene (GFePc) and boron‐doped graphene substrate (BGFePc) have been studied to determine the stability as a function of potential and pH through spin‐polarized density functional theory (DFT) calculations at both infinitesimally low (10−9 m) and 1 m Fe2+/Fe3+ ionic concentrations. BGFePc offers higher stability in both concentrations than GFePc. In both cases, the oxygen‐intermediates are more stable than the bare catalytic surface due to the metal d‐band center shifting further away from the Fermi level in the valence band state (higher energy of antibonding). Moreover, at an Fe2+ ionic concentration, both catalysts would be stable in the potential and pH regions at the operating conditions of rotating disk electrode (RDE) experiments and PEM fuel cells.
- 16 February 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 126 (9) , 4458-4471
Regulating Electronic Descriptors for the Enhanced ORR Activity of FePc-Functionalized Graphene via Substrate Doping and/or Ligand Exchange: A Theoretical Study
- 16 February 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 126 (9) , 4458-4471
Regulating Electronic Descriptors for the Enhanced ORR Activity of FePc-Functionalized Graphene via Substrate Doping and/or Ligand Exchange: A Theoretical Study