Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ibrahim Elnaml has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sustainable Geopolymer Cementitious Composites for Pavement Moisture Control: Materials, Durability, Geosynthetic Interfaces, and Infrastructure Applications

    by Georgina Abdallah, Haya Almutairi, Marianne Saba, Ibrahim Elnaml, Ahmed Mohammed Youssef, Ali Jahami

    Geopolymer and alkali-activated cementitious composites have been investigated for sustainable infrastructure applications, including pavement layers exposed to moisture-related distress from water infiltration, capillary rise, suction change, fines pumping, subgrade softening, drainage loss, and traffic-induced pore pressure. This critical review evaluates these sustainable cementitious systems as potential moisture-control treatments by connecting binder-scale transport behavior to pavement-layer performance and geosynthetic interface functions. A process-structure-interface-service framework is used to organize the evidence: precursor chemistry, activator dosage, curing, and additives control pore connectivity and shrinkage cracking; these features govern absorption, sorptivity, pressure penetration, hydraulic conductivity, capillary uptake, and chemical durability; geotextiles, geogrids, geocomposites, geomembranes, and geosynthetic clay liners then determine separation, filtration, drainage, reinforcement, protection, or barrier performance; and the pavement system is ultimately judged by retained soaked stiffness, controlled flow paths, fines retention, and service-life validation. The review distinguishes direct evidence from transfer-supported hypotheses. Existing studies provide strong independent evidence for geopolymer concrete transport resistance and for geosynthetic pavement functions, and moderate evidence for alkali-activated/geopolymer soil stabilization. However, direct field evidence for coupled geopolymer-treated layers with geosynthetic interfaces under traffic, water input, and drainage boundaries remains limited. The key contribution is a testable framework that links hydraulic conductivity, capillary rise, shrinkage/crack control, soaked CBR/UCS/resilient modulus, geotextile permittivity and apparent opening size, filtration/clogging, interface shear, leaching, and instrumented pavement monitoring. The review concludes that geopolymer treatment should be considered a complementary stabilization and water-path-control strategy, not a substitute for geosynthetic design. Implementation requires coupled laboratory boxes or field sections that verify whether the combined system reduces moisture damage without trapping water or creating brittle, alkaline, or clogged interfaces.

  • Open Access

    Explainable machine learning for predicting the splitting tensile strength of SCM-blended concrete using optimized Gaussian process regression

    by Ali Alnaqbi, Abdalla Mahmoud Salim, Mohammad Al-Zu’BI, Ibrahim Elnaml, Abdulaziz Alotaibi, Ahmed Mohammad Youssef

  • Open Access

    Performance-Based Optimization of Soybean-Based Recycling Agents in SBS-Modified Asphalt Binders and High-RAP

    by Anas AbuAlia, Ibrahim Elnaml, Louay N. Mohammad, Samuel B. Cooper, Gaylon L. Baumgardner

    Asphalt binders are complex viscoelastic polymeric materials whose rheological behavior is governed by interactions among their chemical constituents and, in polymer-modified systems, the morphology and stability of the dispersed polymer network. This study developed a performance-based framework for selecting the type and dosage of bio-based soybean recycling agents (RAs) for styrene-butadiene-styrene (SBS)-modified asphalt mixtures containing 30% reclaimed asphalt pavement (RAP). Ten dense-graded asphalt mixtures with a nominal maximum aggregate size of 12.5 mm were evaluated, including a control mixture produced with PG 76-22 (PG 67-22 asphalt binder modified with 3.5% SBS) and no RAP, and nine mixtures containing 30% RAP and three soybean-based recycling agents (RA1, RA2, and RA3) at dosages of 0.5%, 2.0%, and 4.0% by weight of binder. Binder characterization included Superpave performance grading, while mixture performance was evaluated using the Hamburg Wheel Tracking (HWT) test, freeze–thaw-conditioned HWT, Semi-Circular Bend (SCB), IDEAL-CT, IDEAL-RT, and Cantabro abrasion loss tests. Increasing recycling-agent dosage improved cracking resistance but progressively reduced rutting resistance, consistent with the measured decrease in binder viscosity. The magnitude of the softening effect followed the order RA3 > RA2 > RA1, consistent with measured viscosity reductions and HWT rut-depth response. Integrating SCB fracture resistance with the HWT rutting criterion identified acceptable dosage ranges of 1.4–4.0%, 0.5–2.8%, and 0.5–0.7% for RA1, RA2, and RA3, respectively. These results demonstrate that the effectiveness of the evaluated recycling agents, as reflected by binder rheology and asphalt mixture performance, influences the balance between fracture resistance and permanent deformation, providing a performance-based framework for optimizing bio-based recycling-agent selection in high-RAP polymer-modified asphalt mixtures.

  • Open Access

    A Comparative Case Study: Cradle-to-Grave LCA for Asphalt Mixtures Containing RAP and WMA

    by Ibrahim Elnaml, Louay N. Mohammad, Heather Dylla, Moses Akentuna, Samuel Cooper

    The U.S. transportation section contributed a third of the national Greenhouse Gas (GHG) emissions in 2022. As such, the Louisiana Department of Transportation and Development (DOTD) initiated federally funded efforts to create Life Cycle Assessment (LCA) models for pavement systems. The objective of this study was to quantify the holistic, cradle-to-grave environmental impacts of asphalt pavements containing Reclaimed Asphalt Pavement (RAP) and Warm Mix Asphalt (WMA) technologies using a closed-loop recycling assumption based on 100% RAP recovery at the end-of-life stage, consistent with current practice in Louisiana. Five field sections in service for up to 16 years were collected from DOTD’s LaPave database. The LCA framework followed ISO 14040 and included definition of cradle-to-grave system boundaries, a functional unit based on in-service pavement sections, inventory data derived from public databases and field performance records, and use-phase modeling based on pavement–vehicle interaction. Public datasets were used to quantify GHG emissions across all life cycle phases. Results indicated WMA additives reduced production and construction GHG emissions by 5%. An RAP increase by 1% decreased material/construction GHG emissions by approximately 0.9%; however, it potentially increased use-phase emissions due to roughness. Mixtures combining WMA and RAP emitted the lowest GHG among the studied mixtures, which promotes integrating sustainable pavement strategies.

  • Open Access

    Advancing Sustainable Pavements: Life Cycle Assessment and Global Warming Potential Benchmarking for Asphalt Mixtures in Louisiana

    by Ibrahim Elnaml, Mohamed Shehata, Louay N. Mohammad, Heather Dylla, Samuel Cooper

    Transportation-related greenhouse gas (GHG) emissions in Louisiana have risen significantly, yet the environmental impacts of asphalt mixture production remain underexplored. This study conducted a cradle-to-gate environmental life cycle assessment (LCA) to quantify global warming potential (GWP) for asphalt mixtures produced in Louisiana and establish GWP benchmarks tailored to mixture types. The LCA encompassed material extraction and production, transport to plants, and asphalt mixing, using two datasets: Environmental Product Declarations from the NAPA Eco-label program (21 mixtures) and Job Mix Formulas from the LaPave database at the Louisiana Department of Transportation and Development (DOTD) (207 mixtures). GWP was evaluated using the FHWA LCA Pave tool with TRACI 2.1 factors, and benchmarks were set at the 20th, 40th, 50th percentiles, and the average. Statistical analyses assessed differences across nominal maximum aggregate sizes and traffic levels. Results showed GWP benchmarks from both datasets exceeded U.S. General Services Administration thresholds by an average of 6.5%, with significant variation among mixture types. These findings highlight the need for targeted emission reduction strategies and accurate environmental performance evaluation to promote more sustainable pavement practices and greener infrastructure in Louisiana.


  • Effect of amine-based and chemical WMA additives on moisture damage resistance of asphalt mixtures at different conditioning protocols

    by Ibrahim Elnaml, Louay N. Mohammad, Moses Akentuna, Mahesh Krishna Reddy Duvvuru, Sagar Parajuli, Samuel B. Cooper


  • Open Access

    Sustainability of Asphalt Mixtures Containing 50% RAP and Recycling Agents

    by Ibrahim Elnaml, Louay N. Mohammad, Gaylon Baumgardner, Samuel Cooper, Samuel Cooper

    The substitution of virgin asphalt binder with reclaimed asphalt pavement (RAP) has environmental and economic merits, however, cracking susceptibility arises due to the aged asphalt binder within RAP. The objectives of this study are to (1) enhance the cracking resistance of asphalt mixtures containing 50% RAP utilizing recycling agents (RAs) derived from six petroleum-based and bio-based materials, (2) conduct an environmental impact assessment (represented by global warming potential “GWP”) for high-RAP mixtures including RAs, and (3) estimate the cost effectiveness of including high-RAP content in asphalt mixtures. Based on the RAP asphalt binder performance grade (PG), base asphalt binder PG, and RAP content, the RA contents were determined to achieve a target asphalt binder of PG 76-22. A control mixture was benchmarked for comparison, specified for high-traffic volume roads, and contained PG 76-22 polymer-modified asphalt binder. The engineering performance of studied asphalt mixtures was evaluated using the Hamburg wheel-tracking (HWT), semi-circular bend, Illinois flexibility index, Ideal cracking tolerance, and thermal stress-restrained specimen tensile strength tests. It was found that petroleum-derived aromatic oil, soy-based oil, and tall oil fatty acid-based RAs demonstrated a successful restoration of aged RAP asphalt binder without compromising the permanent deformation resistance. The 50% RAP mixtures emitted less GWP by 41% and 42.9% using petroleum- and bio-oil RAs, respectively, and achieved a 31% cost reduction compared to the control mixtures.