Pengyan Wen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Pengyan Wen has a total of 72 co-authors. Here are the top co-authors by number of shared publications:
- Hui Yang
School of Physical Science and Technology, ShanghaiTech University
5 shared publications - Kanglin Xiong
Suzhou Laboratory
4 shared publications Xinrui Wang
Suzhou Laboratory
4 shared publicationsYuzhen Zheng
Suzhou Laboratory
4 shared publications- Bernd Gotsmann
IBM Research Europe—Zurich, Rüschlikon, Switzerland
3 shared publications Bolin Zhou
Suzhou Laboratory
3 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 32 (6: Special) , 1-10
Investigating the Radial Photonic Band Structure of Second-Order Circular Gratings Using FDTD and Hankel Transform
Second-order circular gratings enable precise control of azimuthal modes and far-field symmetry in surface-emitting laser devices due to their rotational symmetry. In this study, we present a comprehensive analysis of the photonic band structures along the radial direction of circular gratings using a novel method combining Finite-Difference Time-Domain (FDTD) simulations with the Hankel transform. This method establishes a band-structure-level description of radial dispersion in circularly symmetric gratings. Energy bands were extracted by exciting the gratings at the center and sampling the radial field distribution via time-domain monitors. We systematically investigated the impact of field polarization, number of periods, duty cycle, and etch depth of gratings on the dispersion relation, revealing that both the width and spectral position of the bandgap are highly tunable by these parameters. To validate our model, angle-resolved spectroscopy was performed on fabricated GaN-based circular gratings with multiple quantum wells. The obtained band structures show clear photonic bandgaps and symmetric dispersion around the high-symmetry points, confirming the existence of radial photonic bands. These findings provide a foundation for the design of novel surface emitting lasers that leverage the band-edge properties of second-order circular gratings.
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 32 (6: Special) , 1-10
Investigating the Radial Photonic Band Structure of Second-Order Circular Gratings Using FDTD and Hankel Transform
Second-order circular gratings enable precise control of azimuthal modes and far-field symmetry in surface-emitting laser devices due to their rotational symmetry. In this study, we present a comprehensive analysis of the photonic band structures along the radial direction of circular gratings using a novel method combining Finite-Difference Time-Domain (FDTD) simulations with the Hankel transform. This method establishes a band-structure-level description of radial dispersion in circularly symmetric gratings. Energy bands were extracted by exciting the gratings at the center and sampling the radial field distribution via time-domain monitors. We systematically investigated the impact of field polarization, number of periods, duty cycle, and etch depth of gratings on the dispersion relation, revealing that both the width and spectral position of the bandgap are highly tunable by these parameters. To validate our model, angle-resolved spectroscopy was performed on fabricated GaN-based circular gratings with multiple quantum wells. The obtained band structures show clear photonic bandgaps and symmetric dispersion around the high-symmetry points, confirming the existence of radial photonic bands. These findings provide a foundation for the design of novel surface emitting lasers that leverage the band-edge properties of second-order circular gratings.
- 15 June 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (24)
Regrowth-free blue GaN-based photonic crystal surface-emitting lasers with triangular air holes
We report the successful realization of a room-temperature blue GaN photonic crystal surface-emitting laser (PCSEL) diode fabricated using a regrowth-free approach. By employing a square lattice photonic crystal structure with modified triangular air holes, we achieve robust two-dimensional single-mode lasing. The device operates with a threshold current density of 5.2 kA/cm2 and emits a Gaussian-shaped beam with exceptionally low beam divergence, measured at 1.15 mrad (0.066°). Furthermore, the symmetry-breaking nature of the triangular air holes enforces a stable linear polarization perpendicular to the long edge of the triangle. This work demonstrates that high-beam-quality blue PCSELs can be achieved using non-regrowth fabrication processes with simple hole geometry, paving the way for high-performance blue laser sources.
- 15 June 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (24)
Regrowth-free blue GaN-based photonic crystal surface-emitting lasers with triangular air holes
We report the successful realization of a room-temperature blue GaN photonic crystal surface-emitting laser (PCSEL) diode fabricated using a regrowth-free approach. By employing a square lattice photonic crystal structure with modified triangular air holes, we achieve robust two-dimensional single-mode lasing. The device operates with a threshold current density of 5.2 kA/cm2 and emits a Gaussian-shaped beam with exceptionally low beam divergence, measured at 1.15 mrad (0.066°). Furthermore, the symmetry-breaking nature of the triangular air holes enforces a stable linear polarization perpendicular to the long edge of the triangle. This work demonstrates that high-beam-quality blue PCSELs can be achieved using non-regrowth fabrication processes with simple hole geometry, paving the way for high-performance blue laser sources.
- 6 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (5) , 2901-2906
Unraveling the Degradation Mechanisms of AlGaN-Based UVC-LEDs: A Comprehensive Analysis
In the fields of medical diagnostics, virus inactivation, and air/water purification, ultraviolet-C light-emitting diodes (UVC-LEDs) have emerged as pivotal light sources, attracting substantial attention in the post-COVID-19 era. Nevertheless, their long-term reliability remains a critical area requiring further optimization. This study focuses on the degradation mechanism of AlGaN-based UVC-LEDs. Experimental results demonstrate that the aged devices exhibit a notable increase in both turn-on voltage and ideality factor. Concurrently, their electroluminescence (EL) characteristics reveal a redshift in peak emission wavelength and a significant reduction in luminescence intensity. By integrating noise analysis and cathodoluminescence (CL) characterization, we conclude that defect-related nonradiative recombination centers were generated in the n-AlGaN layer beneath the quantum wells (QWs), and these centers facilitate defect-mediated carrier tunneling, contributing to the observed performance degradation. This research provides valuable insights to guide the subsequent design and development of high-reliability UVC-LEDs.
- 6 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (5) , 2901-2906
Unraveling the Degradation Mechanisms of AlGaN-Based UVC-LEDs: A Comprehensive Analysis
In the fields of medical diagnostics, virus inactivation, and air/water purification, ultraviolet-C light-emitting diodes (UVC-LEDs) have emerged as pivotal light sources, attracting substantial attention in the post-COVID-19 era. Nevertheless, their long-term reliability remains a critical area requiring further optimization. This study focuses on the degradation mechanism of AlGaN-based UVC-LEDs. Experimental results demonstrate that the aged devices exhibit a notable increase in both turn-on voltage and ideality factor. Concurrently, their electroluminescence (EL) characteristics reveal a redshift in peak emission wavelength and a significant reduction in luminescence intensity. By integrating noise analysis and cathodoluminescence (CL) characterization, we conclude that defect-related nonradiative recombination centers were generated in the n-AlGaN layer beneath the quantum wells (QWs), and these centers facilitate defect-mediated carrier tunneling, contributing to the observed performance degradation. This research provides valuable insights to guide the subsequent design and development of high-reliability UVC-LEDs.
- 26 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (1) , 777-784
Inductively Coupled Plasma Etching of ITO Nanophotonic Structures for Visible Wavelengths
- 26 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (1) , 777-784
Inductively Coupled Plasma Etching of ITO Nanophotonic Structures for Visible Wavelengths
- 27 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 61 (4) , 1-5
Thermal and Stress Analysis on Multi-Ridge GaN-Based Laser Diodes
Thermal effects and stress play important roles in both performance and reliability of GaN-based laser diodes, particularly in multi-ridge lasers designed for high-power applications. In this paper, we studied the temperature and stress distributions within a five-ridge GaN-based laser diode. In the cross-ridge direction, the laser chip with a ridge spacing configuration of 64-76-76-64 μm exhibited the best temperature uniformity while an isometric ridge spacing of 60 μm demonstrated the best stress uniformity. Furthermore, we proposed a tapered heatsink design to enhance the temperature and stress uniformity along the ridge. Our results indicated that, in comparison with the conventional structure, the tapered heatsink reduced the temperature difference along the ridge by 59%, leading to relatively lower temperature at both facets. Additionally, the tapered heatsink reduced the average stress by 26%. This study provides theoretical foundations and practical guidelines for the thermal and stress design of semiconductor lasers.
- 27 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 61 (4) , 1-5
Thermal and Stress Analysis on Multi-Ridge GaN-Based Laser Diodes
Thermal effects and stress play important roles in both performance and reliability of GaN-based laser diodes, particularly in multi-ridge lasers designed for high-power applications. In this paper, we studied the temperature and stress distributions within a five-ridge GaN-based laser diode. In the cross-ridge direction, the laser chip with a ridge spacing configuration of 64-76-76-64 μm exhibited the best temperature uniformity while an isometric ridge spacing of 60 μm demonstrated the best stress uniformity. Furthermore, we proposed a tapered heatsink design to enhance the temperature and stress uniformity along the ridge. Our results indicated that, in comparison with the conventional structure, the tapered heatsink reduced the temperature difference along the ridge by 59%, leading to relatively lower temperature at both facets. Additionally, the tapered heatsink reduced the average stress by 26%. This study provides theoretical foundations and practical guidelines for the thermal and stress design of semiconductor lasers.
- 13 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 25 (2) , 329-334
Aging-Induced Mg Cluster Observation in GaN-Based Lasers by Atom Probe Tomography
Gallium nitride (GaN)-based lasers, spanning emission wavelengths from ultraviolet to green, are widely used as light sources in many application domains. Despite their widespread usage, the comprehensive analysis of atomic-level degradation remains challenging primarily due to limitations in metrology techniques. In this study, we investigated the aging-induced magnesium (Mg) clusters in GaN-based lasers utilizing atom probe tomography. Notably, we have identified Mg clusters of several nanometers in size within the p-type aluminum gallium nitride (p-AlGaN) cladding layer of aged lasers, marking the first observation of such clusters in this context. The presence of Mg clusters induces light scattering and absorption within the cladding layer, contributing to an increase in internal loss and a decrease in slope efficiency. Furthermore, our findings underscore the efficacy of atom probe tomography as a potent technique for conducting atomic-level device failure analysis of semiconductor devices.
- 13 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 25 (2) , 329-334
Aging-Induced Mg Cluster Observation in GaN-Based Lasers by Atom Probe Tomography
Gallium nitride (GaN)-based lasers, spanning emission wavelengths from ultraviolet to green, are widely used as light sources in many application domains. Despite their widespread usage, the comprehensive analysis of atomic-level degradation remains challenging primarily due to limitations in metrology techniques. In this study, we investigated the aging-induced magnesium (Mg) clusters in GaN-based lasers utilizing atom probe tomography. Notably, we have identified Mg clusters of several nanometers in size within the p-type aluminum gallium nitride (p-AlGaN) cladding layer of aged lasers, marking the first observation of such clusters in this context. The presence of Mg clusters induces light scattering and absorption within the cladding layer, contributing to an increase in internal loss and a decrease in slope efficiency. Furthermore, our findings underscore the efficacy of atom probe tomography as a potent technique for conducting atomic-level device failure analysis of semiconductor devices.
- Open Access
- 22 July 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (4)
Atomic-level quantum well degradation of GaN-based laser diodes investigated by atom probe tomography
Gallium nitride (GaN)- based lasers are extensively employed in display, lighting, and communication applications due to their visible laser emission. Despite notable advancements in their performance and reliability, sustained device functionality over extended periods remains a challenge. Among the diverse mechanisms contributing to degradation, the deterioration of quantum wells poses a persistent obstacle. In this study, we investigated the atomic-level degradation of quantum wells within GaN-based laser diodes utilizing atom probe microscopy. Our analysis revealed a substantial increase in indium fluctuation, accompanied by the formation of indium protrusions at the quantum well interfaces, which provides a credible explanation for the observed increase in FWHM (full width at half maximum) of the spontaneous spectra of lasers following prolonged operation. Additionally, magnesium analysis yielded no evidence of diffusion into the quantum well region. Combined with prior studies, we attribute the degradation of quantum wells primarily to the formation of indium-related non-radiative recombination centers.
- 22 July 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (4)
Open AccessAtomic-level quantum well degradation of GaN-based laser diodes investigated by atom probe tomography
Gallium nitride (GaN)- based lasers are extensively employed in display, lighting, and communication applications due to their visible laser emission. Despite notable advancements in their performance and reliability, sustained device functionality over extended periods remains a challenge. Among the diverse mechanisms contributing to degradation, the deterioration of quantum wells poses a persistent obstacle. In this study, we investigated the atomic-level degradation of quantum wells within GaN-based laser diodes utilizing atom probe microscopy. Our analysis revealed a substantial increase in indium fluctuation, accompanied by the formation of indium protrusions at the quantum well interfaces, which provides a credible explanation for the observed increase in FWHM (full width at half maximum) of the spontaneous spectra of lasers following prolonged operation. Additionally, magnesium analysis yielded no evidence of diffusion into the quantum well region. Combined with prior studies, we attribute the degradation of quantum wells primarily to the formation of indium-related non-radiative recombination centers.
- 26 May 2022
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12148, 82-87
Self-heating analysis of monolithically integrated hybrid III-V/Si PIN diode
Self-heating is a crucial effect in integrated nanophotonic devices regarding their power consumption. In this work, we employ coupled 3D thermo-electrical simulations to gain insight into the thermal behavior related to traps in a monolithic InP-InGaAs-InP pin-diode fabricated at IBM-Research Zurich. From transport study, two types of defects are found to be very likely present in the studied device: (i) positive oxide charges close to the interface between III-V materials and top oxide layer and (ii) electron-type traps at the p-InP/i-InGaAs interface. Thermal simulations show that the presence of electron-type traps at the p/i interface enhances the self-heating in the device
- 26 May 2022
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12148, 82-87
Self-heating analysis of monolithically integrated hybrid III-V/Si PIN diode
Self-heating is a crucial effect in integrated nanophotonic devices regarding their power consumption. In this work, we employ coupled 3D thermo-electrical simulations to gain insight into the thermal behavior related to traps in a monolithic InP-InGaAs-InP pin-diode fabricated at IBM-Research Zurich. From transport study, two types of defects are found to be very likely present in the studied device: (i) positive oxide charges close to the interface between III-V materials and top oxide layer and (ii) electron-type traps at the p-InP/i-InGaAs interface. Thermal simulations show that the presence of electron-type traps at the p/i interface enhances the self-heating in the device
- Open Access
- 23 March 2022
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 9 (4) , 1338-1348
Thermal Simulation and Experimental Analysis of Optically Pumped InP-on-Si Micro- and Nanocavity Lasers
There is a general trend of downscaling laser cavities, but with high integration and energy densities of nanocavity lasers, significant thermal issues affect their operation. The complexity of geometrical parameters and the various materials involved hinder the extraction of clear design guidelines and operation strategies. Here, we present a systematic thermal analysis of InP-on-Si micro- and nanocavity lasers based on steady-state and transient thermal simulations and experimental analysis. In particular, we investigate the use of metal cavities for improving the thermal properties of InP-on-Si micro- and nanocavity lasers. Heating of lasers is studied by using Raman thermometry and the results agree well with simulation results, both revealing a temperature reduction of hundreds of kelvins for the metal-clad cavity. Transient simulations are carried out to improve our understanding of the dynamic temperature variation under pulsed and continuous wave pumping conditions. The results show that the presence of a metal cladding not only increases the overall efficiency in heat dissipation but also causes a much faster temperature response. Together with optical experimental results under pulsed pumping, we conclude that a pulse width of 10 ns and a repetition rate of 100 kHz is the optimal pumping condition for a 2 μm wide square cavity.
- 23 March 2022
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 9 (4) , 1338-1348
Open AccessThermal Simulation and Experimental Analysis of Optically Pumped InP-on-Si Micro- and Nanocavity Lasers
There is a general trend of downscaling laser cavities, but with high integration and energy densities of nanocavity lasers, significant thermal issues affect their operation. The complexity of geometrical parameters and the various materials involved hinder the extraction of clear design guidelines and operation strategies. Here, we present a systematic thermal analysis of InP-on-Si micro- and nanocavity lasers based on steady-state and transient thermal simulations and experimental analysis. In particular, we investigate the use of metal cavities for improving the thermal properties of InP-on-Si micro- and nanocavity lasers. Heating of lasers is studied by using Raman thermometry and the results agree well with simulation results, both revealing a temperature reduction of hundreds of kelvins for the metal-clad cavity. Transient simulations are carried out to improve our understanding of the dynamic temperature variation under pulsed and continuous wave pumping conditions. The results show that the presence of a metal cladding not only increases the overall efficiency in heat dissipation but also causes a much faster temperature response. Together with optical experimental results under pulsed pumping, we conclude that a pulse width of 10 ns and a repetition rate of 100 kHz is the optimal pumping condition for a 2 μm wide square cavity.