FAFirat Aydin

Firat Aydin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Firat Aydin has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Magnetite-based SPME-SQT-FAAS for trace chromium determination in rice

    by Sevda Hünür Uzan, Fırat Aydin, Mehmet Aslan

    Rice, an essential carbohydrate and nutrient source grown in aquatic environments, is a staple food globally. Due to the high toxicity of chromium (Cr), monitoring its trace levels in agricultural products is critical for human health. In this study, Total Cr concentrations were determined in two distinct rice varieties: Karacadağ rice (Turkey) and Baldo rice (Italy). A novel Magnetic Solid-Phase Extraction (MSPE) protocol using oleic acid-coated magnetic nanoparticles (OAMNPs) was developed and coupled with slotted quartz tube flame atomic absorption spectrometry (SQT-FAAS) for trace chromium quantification. Following systematic optimization of key operational parameters such as sample pH, eluent and buffer volumes, and magnetic nanoparticle (MNP) dosage, the method yielded a limit of detection (LOD) of 1.30 µg/L, a limit of quantification (LOQ) of 4.33 µg/L, and a linear range of 5–100 µg/L (R 2 = 0.9989), delivering a remarkable enhancement factor of 104.78. High precision was confirmed with a relative standard deviation (RSD) of 5.78%. The method demonstrated excellent accuracy and robustness, supported by recovery values ranging between 93 and 105% in the presence of common interfering ions. These quantitative outcomes underscore that the developed analytical platform is highly sensitive, precise, and efficient for monitoring trace chromium in complex food matrices. Methodological accuracy and robustness were successfully validated through recovery assays. These outcomes underscore that the proposed OAMNP- MSPE-SQT-FAAS framework represents a highly sensitive, precise, and efficient analytical platform for detecting trace chromium within complex matrices.

  • Environmental Risk Assessment and Resource Recovery Potential of Asphaltite Ash in Şırnak (Türkiye): A Geochemical and Machine Learning Approach

    by Celal Fidan, Veysel Gider, Figen Erek, Işıl Aydın, Fırat Aydın, Cafer Budak

    In this study, asphaltite samples obtained from five different sites (Harbul, Milli, Avgamasya, Seridahlı and Karatepe) in Şırnak province were ashes and analyzed by ICP-OES method after microwave-assisted acid solubilization. According to the results of the analysis, the abundance order of the major elements was determined as Fe (52.400-61.200 mg/kg) > Zn (10.860-39.805 mg/kg) > Ni (2.532-4.755 mg/kg) > Mo (2.246-3.186 mg/kg), and it was confirmed that the relative standard deviation (RSD) values in repeated measurements were below 5%. Analyses revealed that especially Cd, Mo, Se and Zn elements were enriched at high levels in all samples. Assessments using the Metal Pollution Index (MPI), Geoaccumulation Index (Igeo) and Potential Ecological Risk Index (RI) showed that all sites were in the very high ecological risk class (RI>600). It has been determined that the Cd-induced risk is dominant, especially in the Harbul area. In contrast, the high concentrations determined in terms of Mo and Zn at the Seridahlı site indicate the economic recovery potential of this ash; according to calculations, the metal recovery value of Seridahlı ash is approximately 323 USD/ton. Geochemical network analysis revealed strong genetic relationships between Mo-Zn-Cu-Se elements, while regression-based machine learning models confirmed that Cd acts independently of other elements and its critical role in terms of environmental risk. The findings show that Şırnak asphaltite ashes pose a serious environmental risk on the one hand, and on the other hand have a significant secondary raw material potential that can be evaluated with appropriate management processes.

  • Open Access

    A new analytical method for the determination of iron content in drugs

    by Ayfer Turan, Işıl Aydın, Fırat Aydın

    Objective: This study is based on the determination of iron, which is found in iron-containing drugs, by a simple, precise, and economical method. Methods: In our study, Flame Atomic Absorption Spectroscopy (FAAS) was used for measurements due to its ease of use and low cost. The disadvantage of FAAS in terms of insufficient precision was turned into an advantage by adding a slotted quartz tube (SQT) to the device and using an enrichment method. Accordingly, a solid-phase microextraction (SPME) method interconnected with slotted quartz tube-flame atomic absorption spectrometry (SQT-FAAS) was developed. Results: While the LOD value for Fe³⁺ ions measured by FAAS was 108.0 mg/L, the LOD value was determined to be 1.12 mg/L with the method developed using CoMNP-SPME-SQT. This indicates a 96.43-fold improvement in the LOD. Conclusion: The developed Co-MNP-DSPE-SQT-FAAS method has been successfully and easily applied for the determination of iron in iron-containing drug samples. These results indicate that the method can also be applied to different samples.

  • Open Access

    A New Method for the Determination of Tellurium Using Slotted Quartz Tube-Flame Atomic Absorption Spectrophotometry with Modified Magnetic Nanoparticles

    by Fatma Ötünç, Berrin Ziyadanoğulları, Fırat Aydın

    Toxic metals have the ability to accumulate in the human body over time, leading to chronic exposure and serious health complications. Tellurium (Te), the heaviest stable chalcogen, is a rare element in the Earth’s crust and is considered toxic even at low concentrations. Prolonged exposure may damage the kidneys, liver, and nervous system. In this study, a novel method was developed for the determination of trace amounts of Te(IV) using oleic acid-coated iron oxide magnetic nanoparticles (OAMNPs) for preconcentration, combined with slotted quartz tube-flame atomic absorption spectrometry (SQT-FAAS). The method was optimized for several parameters: buffer volume (1 mL), nanoparticle amount (50 mg), pH (8.0), contact time (60 seconds), and manual shaking time (120 seconds). The developed method achieved a limit of detection (LOD) of 0.02 μg/L and a limit of quantification (LOQ) of 0.07 μg/L, with a preconcentration factor of 76.2. Matrix effects were investigated, and recovery studies demonstrated the method’s high accuracy and applicability in real samples. The results confirmed that this approach is efficient, sensitive, and reliable for determining tellurium, even in complex matrices like cold tea.

  • Heavy Metal Analysis and Health Effects in Foods

    by Firat Aydin, Isil Aydin

    Heavy metals are elements that are toxic to living organisms above a certain concentration. These elements, which exist in nature, are taken in by living things through air, water and food. They have various effects in the body. Since the amount is important for toxic effects, their analytical analysis is very important. In this study, the toxic effects of heavy metals taken with food in the body and analysis methods are explained.

  • Analytical Determination and Identification Methods for Organic and Inorganic Structures in Foods

    by Isil Aydin, Firat Aydin

    The human body needs nutrients called "food" for growth, maintenance, survival and resistance to disease. Foods contain many components, especially organic and inorganic substances. These components enable many reactions to take place in the body. Contamination of food by pollution threatens the health of the body and causes many diseases. This is a threat to living things.Therefore, in order to ensure the quality and safety of foods, it is very important to determine the organic and inorganic substances in its content by analytical instrumental analysis methods. In our study, these methods are explained and their importance is emphasized.

  • Open Access

    GSR Analysis by Spectrophotometry Method in Forensic Chemistry

    by Gökhan Teki̇n, Ercan Seyhan, Işıl Aydin, Fırat Aydin

    This study was conducted to analyze residual shots from forensic chemistry applications. The entire analysis process was evaluated with Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy (SEM/EDS) and, Graphite Furnace Atomic Absorption Spectrometry (GFAAS)devices, which are among the methods for obtaining efficient results, and positive results were tried to be obtained by comparison. Following the study, it was discussed which results were more appropriate; in particular, the samples' appropriateness for reanalysis was underlined. The presence of shot residues on all samples was determined in the analyses performed with the SEM/EDS device. When the same samples were analyzed with the GFAAS device, the results remained below the threshold value of 10 μg/L, which is the antimony concentration indicating the presence of shot residues. It should be noted that the values we obtained may vary with the size and weight of the shot residue particles. Due to the ease of sample collection, the capacity to identify elements other than gunshot residues on the sample under examination, and the circumstances surrounding the determination of particles below the threshold value, the analysis method utilizing the SEM/EDS device has been deemed more suitable despite its higher cost.

  • Electrochemical evaluation of nivolumab used in cancer treatment with differential pulse voltammetry: A novel approach with single-use pencil graphite electrode

    by Mehmet Aslan, Fırat Aydın, Abdulkadir Levent

    Objectives Nivolumab is used in a treatment called immunotherapy, which helps the immune system cells to attack cancer cells. The electrochemical properties and quantification of this drug were performed using single-use pencil tips. Evidence acquisition Here, a selective voltammetric method for the determination and electrochemical characterization of Nivolumab used in cancer therapy was developed for the first time using a disposable pencil electrode by cyclic voltammetry and differential pulse voltammetry techniques. Nivolumab exhibited an anodic signal at +0.879 V (vs. Ag/AgCl) in PBS (pH 3.0, 0.02 M NaCl) medium. Results This procedure showed a linear response in phosphate buffer solutions (pH 3.0, 0.02 M NaCl) media within the concentration range of 0.01 mg mL-1 to 0.07 mg mL-1 and limit of detection and the limit of quantification values were determined to be 2.49 μg mL-1 and 8.30 μg mL-1, respectively. Conclusions The developed method offers an important analytical approach for the detection and characterization of NIVO. Precisely measuring and monitoring the levels of such drugs in real sample analyses or biological samples is critical for evaluating response to treatment, optimizing treatment strategies. Therefore, the method was applied to real sample analyses. Voltammetric results developed using PG electrode were compared with UV-Vis results. It has been determined that the results obtained are compatible with each other. Graphical abstract


  • Quantitative determination and removal of pesticide residues in fresh vegetables and fruit products by LC–MS/MS and GC–MS/MS

    by Ayhan Elmastas, Adil Umaz, Vedat Pirinc, Firat Aydin

    Pesticides are the potent agrochemicals used to successfully manage, repel, or stop pests and weeds in agricultural production. This study analyzed 222 pesticide active substances in 90 samples of seven different vegetables and fruits acquired from producers through liquid chromatography-mass spectrometry/mass spectrometry (LC–MS/MS) and gas chromatography-mass spectrometry/mass spectrometry (GC–MS/MS) technology. The validation parameters of each pesticide’s active substances were determined. The LOD, LOQ values, and recovery studies of the 222 active substances were 3.00, 10.00 ng/g, and between 76.07 and 108.08%, respectively. The correlation coefficients and measurement uncertainty were determined to be between 0.990–0.999 and 8.91–31.46%, respectively. There were active substances of chlorpyrifos, acetamiprid, azoxystrobin, difenoconazole, malathion, dieldrin, boscalid, triticonazole, tebuconazole, triadimenol, trifloxystrobin, pirimicarb, and dodine among the vegetable and fruit samples used in the study. There were no active substances in 55 (61%) samples. Among the 35 samples (39%), 31 samples (34%) contained only one active substance, whereas four (5%) contained two active substances. However, the amount of active substances in six (7%) samples was above the maximum residue levels (MRL) limits. Various processes used in the study revealed that peeling was the most effective pesticide residue removal strategy. The washing procedure also proved that it reduced some pesticide residues but failed to eliminate all pesticides. The peeling process successfully reduced a significant amount of the active substances from the products, however, residues remained. Washing the fruits with hot water was also effective in removing residues. As a result, analyses of the peeled sections yielded higher pesticide residue concentrations than those of the entire product.


  • Open Access

    Doğu Anadolu'da Gıda Olarak Tüketilen Bazı Türlerin Multi-element Analizi: Bu Türlerin Element İçeriklerinin Karşılaştırılması

    by Adil Umaz, Fırat Aydin, Mehmet Firat, Abdulselam Ertaş

    Bu çalışmada, gıda ve tıbbiamaçlar için kullanılan bazı bitki türlerinin ( Arum conophalloides,Arum detruncatum, Ornithogalum narbonense Muscari comosumve Lippia citrodora ) multi-element içerikleri indüktif eşleşmiş plazmalı kütle spektrometresi (ICP-MS) ile tayin edilmiştir. Çalışmada kullanılan türler önce mikrodalga çözünürleştirme işleminde derişik nitrik asit ve hidrojen peroksit ilave edilerek yakma işlemi yapılmıştır. Daha sonra elde edilen çözelti son hacim 100 mL olacak şekilde seyreltilmiş ve ICP-MS ile analiz edilmiştir. Aynı cinsin farklı türlerinin element içerikleri birbiriyle karşılaştırılmıştır. Bu cinslere ait türlerin element içerikleri birbirinden farklı olduğu ve bu farlılık ise bitkinin genetik yapısı, coğrafi konum, iklim ve çevre koşullarına bağlı olduğu belirlenmiştir. Ayrıca, bu çalışmada metot validasyon çalışması yapılmıştır.