Jian Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jian Zhang has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Guoyu Zhang
School of OptoElectronic Engineering, Changchun University of Science and Technology, Changchun 130022, China
2 shared publications - Bonan Li
College of Instrumentation and Electrical Engineering, Jilin University, Changchun 130012, China
1 shared publication Chao Wang
1 shared publicationChenjie Gong
1 shared publication- Chunyan Wang
Opto-Electronics Engineering College, Changchun University of Science and Technology, Changchun 130022, China
1 shared publication - Da Xu
Changchun Univ Sci & Technol, Dept Optoelect Engn, Changchun 130022, Peoples R China
1 shared publication
Latest Publications
- Open Access
SFD-YOLO: A Multi-Angle Scattered Field-Based Optical Surface Defect Recognition Method
The surface quality of optical components plays a decisive role in advanced imaging, precision manufacturing, and high-power laser systems, where even defects can induce abnormal scattering and degrade system performance. Addressing the limitations of conventional single-view inspection methods, this study presents a panoramic multi-angle scattered light field acquisition approach integrated with deep learning-based recognition. A hemispherical synchronous imaging system is designed to capture complete scattered distributions from surface defects in a single exposure, ensuring both structural consistency and angular completeness of the measured data. To enhance the interpretation of complex scattering patterns, we develop a tailored lightweight network, SFD-YOLO, which incorporates the PSimam attention module for improved salient feature extraction and the Efficient_Mamba_CSP module for robust global semantic modeling. Using a simulated dataset of multi-width scratch defects, the proposed method achieves high classification accuracy with strong generalization and computational efficiency. Compared to the baseline YOLOv11-cls, SFD-YOLO improves Top-1 accuracy from 92.5% to 95.6%, while reducing the parameter count from 1.54 M to 1.25 M and maintaining low computational cost (Flops 4.0G). These results confirm that panoramic multi-angle scattered imaging, coupled with advanced neural architectures, provides a powerful and practical framework for optical surface defect detection, offering valuable prospects for high-precision quality evaluation and intelligent defect inversion in optical inspection.
Open AccessSFD-YOLO: A Multi-Angle Scattered Field-Based Optical Surface Defect Recognition Method
The surface quality of optical components plays a decisive role in advanced imaging, precision manufacturing, and high-power laser systems, where even defects can induce abnormal scattering and degrade system performance. Addressing the limitations of conventional single-view inspection methods, this study presents a panoramic multi-angle scattered light field acquisition approach integrated with deep learning-based recognition. A hemispherical synchronous imaging system is designed to capture complete scattered distributions from surface defects in a single exposure, ensuring both structural consistency and angular completeness of the measured data. To enhance the interpretation of complex scattering patterns, we develop a tailored lightweight network, SFD-YOLO, which incorporates the PSimam attention module for improved salient feature extraction and the Efficient_Mamba_CSP module for robust global semantic modeling. Using a simulated dataset of multi-width scratch defects, the proposed method achieves high classification accuracy with strong generalization and computational efficiency. Compared to the baseline YOLOv11-cls, SFD-YOLO improves Top-1 accuracy from 92.5% to 95.6%, while reducing the parameter count from 1.54 M to 1.25 M and maintaining low computational cost (Flops 4.0G). These results confirm that panoramic multi-angle scattered imaging, coupled with advanced neural architectures, provides a powerful and practical framework for optical surface defect detection, offering valuable prospects for high-precision quality evaluation and intelligent defect inversion in optical inspection.
- 6 August 2025
- Published by Elsevier in Materials Today Communications
- Vol. 48
Design and analysis of broadband subwavelength metallic grating based on deep learning
- 6 August 2025
- Published by Elsevier in Materials Today Communications
- Vol. 48
Design and analysis of broadband subwavelength metallic grating based on deep learning
- Open Access
- 10 June 2022
- Published by MDPI AG in Atmosphere
- Vol. 13 (6) , 950
Effects of Air Pollution on Sunshine Duration Trends in Typical Chinese Cities
Long-term trends in sunshine duration in Chinese cities have been closely linked to factors caused by air pollution. To understand this impact on sunshine duration (SD), surface solar radiation from 1981 to 2020, annual PM2.5 concentration from 2012 to 2020 and air pollution index (API) data from 2013 to 2020 collected in ten representative cities in China were investigated, and the long-term relationship of SD with diffuse fraction (DF), aerosol option depth (AOD), annual PM2.5 concentration and API were analyzed. The results indicated that trends in SD varied across cities. SD decreased in seven of the ten selected cities’ stations in the past 40 years, and the annual mean SD decreased from −0.03 h d−1 per decade to −0.36 h d−1 per decade—particularly in the Beijing North China Plain, Shanghai and Wuhan stations in the Yangtze River delta, where the trend coefficients were lower than −0.5. Conversely, increases in varying degrees of SD were found in Kunming (0.38 h d−1 per decade), Guangzhou and Shenyang in Southwest, South and Northeast China, respectively—with the biggest trend coefficient of 0.54 in Kunming. In addition to the SD variation, the DF in the ten city stations increased continuously from 1981 to 2010 and then declined after 2010, which is closely related to decreases in the annual PM2.5 concentration after 2012. The correlation coefficients between DF and SD ranged from −0.04 to −0.62, validating their negative relationship and the slight increasing trend in SD in recent ten years. The annual averages for SD and the DF plateaued in the 2010s due to the stringent pollution controls established by the Chinese government after 2010. Furthermore, the correlation coefficients between SD and the API ranged from −0.12 to −0.58, demonstrating a negative relationship between SD and the API.
- 10 June 2022
- Published by MDPI AG in Atmosphere
- Vol. 13 (6) , 950
Open AccessEffects of Air Pollution on Sunshine Duration Trends in Typical Chinese Cities
Long-term trends in sunshine duration in Chinese cities have been closely linked to factors caused by air pollution. To understand this impact on sunshine duration (SD), surface solar radiation from 1981 to 2020, annual PM2.5 concentration from 2012 to 2020 and air pollution index (API) data from 2013 to 2020 collected in ten representative cities in China were investigated, and the long-term relationship of SD with diffuse fraction (DF), aerosol option depth (AOD), annual PM2.5 concentration and API were analyzed. The results indicated that trends in SD varied across cities. SD decreased in seven of the ten selected cities’ stations in the past 40 years, and the annual mean SD decreased from −0.03 h d−1 per decade to −0.36 h d−1 per decade—particularly in the Beijing North China Plain, Shanghai and Wuhan stations in the Yangtze River delta, where the trend coefficients were lower than −0.5. Conversely, increases in varying degrees of SD were found in Kunming (0.38 h d−1 per decade), Guangzhou and Shenyang in Southwest, South and Northeast China, respectively—with the biggest trend coefficient of 0.54 in Kunming. In addition to the SD variation, the DF in the ten city stations increased continuously from 1981 to 2010 and then declined after 2010, which is closely related to decreases in the annual PM2.5 concentration after 2012. The correlation coefficients between DF and SD ranged from −0.04 to −0.62, validating their negative relationship and the slight increasing trend in SD in recent ten years. The annual averages for SD and the DF plateaued in the 2010s due to the stringent pollution controls established by the Chinese government after 2010. Furthermore, the correlation coefficients between SD and the API ranged from −0.12 to −0.58, demonstrating a negative relationship between SD and the API.
- Open Access
Developmental Trends in the Application and Measurement of the Bidirectional Reflection Distribution Function
The bidirectional reflection distribution function (BRDF) is among the most effective means to study the phenomenon of light–object interaction. It can precisely describe the characteristics of spatial reflection of the target surface, and has been applied to aerial remote sensing, imaging technology, materials analysis, and computer rendering technology. This study provides a comprehensive review of the development of devices to measure the BRDF. We gathered research in the area by using the Web of Science Core Collection, and show that work on the BDRF has been ongoing in the last 30 years. We also describe some typical measurement devices for the BRDF proposed in the literature. Finally, we summarise outstanding problems related to BRDF measurement and propose directions of future research in the area.
Open AccessDevelopmental Trends in the Application and Measurement of the Bidirectional Reflection Distribution Function
The bidirectional reflection distribution function (BRDF) is among the most effective means to study the phenomenon of light–object interaction. It can precisely describe the characteristics of spatial reflection of the target surface, and has been applied to aerial remote sensing, imaging technology, materials analysis, and computer rendering technology. This study provides a comprehensive review of the development of devices to measure the BRDF. We gathered research in the area by using the Web of Science Core Collection, and show that work on the BDRF has been ongoing in the last 30 years. We also describe some typical measurement devices for the BRDF proposed in the literature. Finally, we summarise outstanding problems related to BRDF measurement and propose directions of future research in the area.
- 1 October 2020
- Published by Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences in Chinese Optics
- Vol. 13 (5) , 1085-1093
Design of an Offner convex grating radiation calibration light source with a wide dynamic range
In order to satisfy the spectral radiance calibration of remote sensing instruments in different spectral distribution, reduce the influence of spectral radiance calibration light sources on the calibration coefficients of space optical remote sensing instruments, and solve technical problems of low spectral simulation accuracy and small spectral dynamic adjustment range, a design method for Offner type convex grating radiation calibration systems with a wide dynamic range based on spectral superposition and the principles of multi-spectral synthesis was presented, and its anastigmatic conditions were derived. The Offner spectral imaging optical system was designed with a cylindrical mirror with an accurate subdivision of broad spectral beams. Then, the mapping relationship between the array surface of the Digital Micro-mirror Device (DMD) and its spatial spectral radiation distribution was designed. The large dynamic range simulation of spectral distribution with the spatial light modulation characteristics of the DMD was achieved. Experiment results show that the interval of the spectral peak has an output by the adjacent unit array micro-mirror is greater than 0.5 nm, the spectral simulation accuracy of three typical color temperatures is 5.2% at T=3 000 K, 4.1% at T=5 000 K, and 3.2% at T=7 000 K. The spectral simulation accuracy of the radiation calibration source was significantly improved, and the influence of spectral mismatch on the calibration coefficients of space optical remote sensing instruments was effectively diminished.
- 1 October 2020
- Published by Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences in Chinese Optics
- Vol. 13 (5) , 1085-1093
Design of an Offner convex grating radiation calibration light source with a wide dynamic range
In order to satisfy the spectral radiance calibration of remote sensing instruments in different spectral distribution, reduce the influence of spectral radiance calibration light sources on the calibration coefficients of space optical remote sensing instruments, and solve technical problems of low spectral simulation accuracy and small spectral dynamic adjustment range, a design method for Offner type convex grating radiation calibration systems with a wide dynamic range based on spectral superposition and the principles of multi-spectral synthesis was presented, and its anastigmatic conditions were derived. The Offner spectral imaging optical system was designed with a cylindrical mirror with an accurate subdivision of broad spectral beams. Then, the mapping relationship between the array surface of the Digital Micro-mirror Device (DMD) and its spatial spectral radiation distribution was designed. The large dynamic range simulation of spectral distribution with the spatial light modulation characteristics of the DMD was achieved. Experiment results show that the interval of the spectral peak has an output by the adjacent unit array micro-mirror is greater than 0.5 nm, the spectral simulation accuracy of three typical color temperatures is 5.2% at T=3 000 K, 4.1% at T=5 000 K, and 3.2% at T=7 000 K. The spectral simulation accuracy of the radiation calibration source was significantly improved, and the influence of spectral mismatch on the calibration coefficients of space optical remote sensing instruments was effectively diminished.