Juqi Zhang

Measuring the size distribution and temperature of high-temperature dispersed particles, particularly in-flame soot, holds paramount importance across various industries. Laser-induced incandescence (LII) stands out as a potent non-contact diagnostic technology for in-flame soot, although its effectiveness is hindered by uncertainties associated with pre-determined thermal properties. To tackle this challenge, our study proposes a multi-parameter inversion strategy—simultaneous inversion of particle size distribution, thermal accommodation coefficient, and initial temperature of in-flame soot aggregates using time-resolved LII signals. Analyzing the responses of different heat transfer sub-models to temperature rise demonstrates the necessity of incorporating sublimation and thermionic emission for accurately reproducing LII signals of high-temperature dispersed particles. Consequently, we selected a particular LII model for the multi-parameter inversion strategy. Our research reveals that LII-based particle sizing is sensitive to biases in the initial temperature of particles (equivalent to the flame temperature), underscoring the need for the proposed multi-parameter inversion strategy. Numerical results obtained at two typical flame temperatures, 1100 K and 1700 K, illustrate that selecting an appropriate laser fluence enables the simultaneous inversion of particle size distribution, thermal accommodation coefficient, and initial particle temperatures of soot aggregates with high accuracy and confidence using the LII technique.

As a part of industrial process tomography, acoustic tomography (AT) is a promising method for high-quality velocity field measurement, which is widely utilized in the monitoring of multiphase flow and atmospheric environment, etc. However, subjected to the safety and reliability requirements of furnaces or industrial pipes, the number of installed transducers is restricted, which results in sparse valid data, and, thus, ill-posed and rank-deficient limited-data linear AT. Therefore, special attention should be given to the transducer arrangement in the framework construction module to maximize the reconstruction accuracy. Unlike methods that minimize relative reconstruction error including true value of interesting field, finding an alternative prior knowledge-based predictor that maps the reconstruction error is more practical and preferred. In this work, based on the prior information that linear independence of vectors incorporates maximum measurement information, a linear independence degree (LID) metric is proposed to optimize the transducer array. It contains no prior information about flow velocity fields, which enables the procedure to be performed in an off-line mode. Covariance matrix adaptation evolution strategy algorithm is employed to solve this minimization problem. Proof-of-concept demonstrations including representative synthetic vortical flow fields with a biased single vortex or with double vortices and experimental data-based velocity field, are performed by comparison with existing representative optimization strategies. Qualitative and quantitative results show the feasibility and robustness of the LID metric in improving imaging accuracy of arbitrary practical velocity fields based on AT. This prior metric is expected to provide guidance for better diagnosis of multiphase flow and optimization of industrial flow process.

Infrared radiation (IR) characteristics are important parameters for detecting, identifying, and striking military targets in the context of systematic countermeasures. Accurate calculation of IR characteristics for aircraft is significant for the simulation of war situations and the designation of combat strategy. In this work, integrated IR characteristics of aircraft skin and exhaust plume and their interaction are investigated by considering the reflection based on a bi-directional reflectance distribution function and various influence factors such as solar irradiation, ground reflection, aerodynamic heating, and projection radiation from the background. Combined with infrared emission and reflection characteristics of the skin, omnidirectional IR intensity distributions of 3−5 μm and 8−14 μm at different Mach numbers are obtained. The exhaust plume IR characteristic for different waves and wavebands are also investigated by considering the presence or absence of base and the difference in nozzle inlet temperature. On this basis, integrated IR characteristics between the skin and exhaust plume are investigated. Results show that aircraft IR characteristics of 3−5 μm are concentrated in the exhaust plume and high-temperature skin near the exhaust plume, while the signals of 8−14 μm are concentrated in the skin. The research results are expected to supply guidance for better detection and identification of typical flight targets.

Accurate measurement of temperature and velocity fields in combustion and flow diagnostic plays an important role in analyzing the heat transfer mechanism and ensuring the safe operation of equipment. In this work, considering the refraction effect of sound waves, temperature and velocity fields are reconstructed simultaneously based on the nonlinear acoustic tomography (NAT) by using the covariance matrix adaptation evolution strategy (CMA-ES) algorithm. In the forward problem, the fast two-point ray-tracing algorithm is introduced to track curved sound waves more efficiently. Due to the sparse measurement signals caused by the limited space and curved acoustic paths, Tikhonov regularization is introduced as the constraint of smoothing prior information to reduce the ill-posedness of the problem. The influence of the velocity regularization parameter and temperature regularization parameter on simultaneously visualizing the temperature and corresponding velocity fields are investigated, respectively. Then the selection strategies of these two regularization parameters are given, which are proved to have high selection efficiency. On this basis, inhomogeneous temperature and velocity fields are reconstructed simultaneously by using the CMA-ES algorithm, simulated annealing, and genetic algorithms. By solving the inverse problem of the NAT, which is highly nonlinear and ill-posed, the feasibility and effectiveness of the CMA-ES algorithm in the simultaneous reconstruction of velocity and temperature fields are confirmed. The proposed method for visualizing the temperature and velocity fields will supply key feedback for the combustion process control.

Metal oxide materials are known for their ability to store thermochemical energy through reversible redox reactions. Metal oxides provide a new category of materials with exceptional performance in terms of thermochemical energy storage, reaction stability and oxygen-exchange and uptake capabilities. However, these characteristics are predicated on the right combination of the metal oxide candidates. In this study, metal oxide materials consisting of pure oxides, like cobalt(II) oxide, manganese(II) oxide, and iron(II, III) oxide (Fe₃O₄), and mixed oxides, such as (100 wt.% CoO, 100 wt.% Fe₃O₄, 100 wt.% CoO, 25 wt.% MnO + 75 wt.% CoO, 75 wt.% MnO + 25 wt.% CoO) and 50 wt.% MnO + 50.wt.% CoO), which was subjected to a two-cycle redox reaction, was proposed. The various mixtures of metal oxide catalysts proposed were investigated through the thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), energy dispersive X-ray (EDS), and scanning electron microscopy (SEM) analyses. The effect of argon (Ar) and oxygen (O₂) at different gas flow rates (20, 30, and 50 mL/min) and temperature at thermal charging step and thermal discharging step (30–1400 °C) during the redox reaction were investigated. It was revealed that on the overall, 50 wt.% MnO + 50 wt.% CoO oxide had the most stable thermal stability and oxygen exchange to uptake ratio (0.83 and 0.99 at first and second redox reaction cycles, respectively). In addition, 30 mL/min Ar–20 mL/min O₂ gas flow rate further increased the proposed (Fe,Co,Mn)Ox mixed oxide catalyst’s cyclic stability and oxygen uptake ratio. SEM revealed that the proposed (Fe,Co,Mn)Ox material had a smooth surface and consisted of polygonal-shaped structures. Thus, the proposed metallic oxide material can effectively be utilized for high-density thermochemical energy storage purposes. This study is of relevance to the power engineering industry and academia.

Corneal laser surgery is a widely used method for the treatment of ocular myopia, hyperopia, and astigmatism. Although it is a well-established technique, the photothermal properties of the cornea are often overlooked, causing unexpected changes in temperature during laser irradiation. Therefore, there is a need for further investigation of the temperature response of the cornea under laser irradiation. In the present work, a photothermal corneal numerical model is presented, assuming the stratification of the cornea with laser ablation in an uncoagulated layer, a coagulated layer, a dehydrating layer, a dried layer, and a carbonized layer. The modified Pennes' bioheat transfer equation and Lambert-Beer's law are applied to simulate heat transfer in the corneal tissue during laser irradiation. And the corneal dynamic photothermal parameters are considered in the proposed model. The central surface temperature, the boundary and thickness of each layer, and the thermal damage during laser irradiation are investigated. From the model, it was found that in the steady-state process, the thickness of the coagulated layer was 2.6, 14.4, and 52.4 times larger than that of the dehydrating layer, the dried layer, and the carbonized layer, respectively. The thickness of the corneal thermal damage gradually increased, and reached a peak of 0.196 mm at about 18.2 ms. Subsequently, it sharply decreased by 0.01 mm before stabilizing. On this basis, the influence of laser intensity is investigated. The parametric investigation and analysis presented provide a theoretical basis for corneal laser surgery, which can be used to improve our understanding of laser-tissue surgery.

The design elements considered during the construction of a thermochemical reactor determine its thermal performance. This current study investigated the effect of design elements, such as boundary layer thickness, insulating materials for the outlet tube design and fluid inlet locations of the frustum, on the thermal performance of a proposed syngas production reactor with incident radiation heat transfer through quartz glass. The P₁ radiation approximation model and fluid flow in the shallow path were integrated into a proposed radiation model. The result indicated that inlet mass flow rates from 5 × 10⁻⁴ to 14 × 10⁻⁴ kg/s increased the temperature in the cavity and the outlet. The fluid inlet located at the top of the quartz glass edges was found to have better thermal performance and maximum average outlet temperature. Insulation for fluid inlets tube above the quartz glass edges of the frustum was very important for the prevention of radiation loss through quartz glass and sedimentation of fluid particles around the quartz glass edge, and the facilitation of fast heat transfer towards the internal part of the reactor. The outlet that was a tube designed using an aluminum oxide-type insulator with a 50 mm boundary layer thickness was found to increase the average outlet temperature of the reactor. This study revealed that fluid entry and exit locations on the frustum and proper fluid outlet design were critical for the thermal performance analysis of the solar thermochemical reactor for heat transfer with quartz glass. Findings from this study will be of relevance to chemical and power engineering sectors, as well as academia.

Solar energy is a sustainable and low-cost renewable energy of enormous importance, especially at this time where non-renewable energy sources are unsustainable and costly. However, improving the thermal performance of a solar energy storage reactor poses some challenges. In this study, the location of fluid inlets and outlets in the given reactor design and its impact on the thermal performance were investigated. A P₁ approximation radiation model coupled with shallow channel approximation of fluid flow was developed. By taking the frustum base as a reference, four fluid inlets along the edges of the frustum and two outlet locations at the base and side of the reactor were computed. Inlets located 4.81 cm from the base of the frustum and an outlet located at the side of the reactor were found to have a better thermal performance with a short conveyer energy flow system. It was also deduced that radiation applied at the edges of the frustum had better thermal performance than that applied at a quartz edge. Furthermore, increasing the laminar inflow rate from 0.36 (L/h) to 3.6 (L/h) increased the temperature distribution in the reactor. This study provides noteworthy insights of relevance to the power engineering industry and academia.