Jianlin Xu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jianlin Xu has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
Lei Niu
School of Materials Science & Engineering Lanzhou University of Technology Lanzhou China
22 shared publicationsChenghu Kang
College of Materials Science & Engineering, Lanzhou University of Technology, Lanzhou, China
15 shared publicationsShibo Ren
School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, P. R. China
13 shared publicationsWenlong Yang
School of physical and mechanical engineering, He xi University, Zhangye, China
7 shared publicationsBingxue Ma
State Key Laboratory of Advanced Processing and Recycling of Non-Ferrous Metals, Lanzhou University of Technology, Lanzhou, China
6 shared publicationsJinqiang Zhao
State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology , Lanzhou 730050 , China
5 shared publications
Latest Publications
- Open Access
Modulating Growth Kinetics and Defect Passivation in Ambient‐Air Evaporation‐Spray Deposition Enables Efficient and Stable Rigid/Flexible Perovskite Solar Cells
Evaporation‐spray technique renders perovskites highly compatible with large‐scale manufacturing. However, the rapid reaction between organic halides and lead iodide induces the accumulation of film defects, rendering the fabrication of high‐quality perovskite films a formidable challenge. To address this critical bottleneck, this study proposes a multifunctional doping strategy based on acetylthiocholine chloride (ATC), which enables the synergistic modulation of the crystalline growth and defect passivation of perovskite films. By virtue of covalent coordination between carbonyl moieties and Pb 2+ , the requirement for intermediate phase transitions in perovskites is eliminated, thereby facilitating complete precursor conversion and decelerating crystal growth. Meanwhile, quaternary ammonium cations and chloride ions efficiently fill the vacancies of organic cations and halide ions, passivate film defects, and markedly suppress the segregation of bromide‐rich/iodide‐rich phases. Ultimately, the resultant perovskite solar cells achieve a power conversion efficiency (PCE) of 22.68%. Moreover, the devices retain 80.35% of their initial efficiency following 1000 h of continuous maximum power point (MPP) tracking tests. The mini‐module with an active area of 63.7 cm 2 achieves a PCE of 17.48%, whereas the flexible devices attain a record‐high PCE of 20.13%.
Open AccessModulating Growth Kinetics and Defect Passivation in Ambient‐Air Evaporation‐Spray Deposition Enables Efficient and Stable Rigid/Flexible Perovskite Solar Cells
Evaporation‐spray technique renders perovskites highly compatible with large‐scale manufacturing. However, the rapid reaction between organic halides and lead iodide induces the accumulation of film defects, rendering the fabrication of high‐quality perovskite films a formidable challenge. To address this critical bottleneck, this study proposes a multifunctional doping strategy based on acetylthiocholine chloride (ATC), which enables the synergistic modulation of the crystalline growth and defect passivation of perovskite films. By virtue of covalent coordination between carbonyl moieties and Pb 2+ , the requirement for intermediate phase transitions in perovskites is eliminated, thereby facilitating complete precursor conversion and decelerating crystal growth. Meanwhile, quaternary ammonium cations and chloride ions efficiently fill the vacancies of organic cations and halide ions, passivate film defects, and markedly suppress the segregation of bromide‐rich/iodide‐rich phases. Ultimately, the resultant perovskite solar cells achieve a power conversion efficiency (PCE) of 22.68%. Moreover, the devices retain 80.35% of their initial efficiency following 1000 h of continuous maximum power point (MPP) tracking tests. The mini‐module with an active area of 63.7 cm 2 achieves a PCE of 17.48%, whereas the flexible devices attain a record‐high PCE of 20.13%.
- 30 November 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (8)
New Polycarbonate‐Based Composites With Added Inorganic Particles ( Al 2 O 3 , SiO 2 , TiO 2 , and ZrO 2 ): Effects on Mechanical Strength and Flame Retardancy
In this paper, a range of inorganic particles (Al 2 O 3 , SiO 2 , TiO 2 , and ZrO 2 ) is combined with PC to prepare composites, respectively. The effect of surface properties of inorganic particles on the flame retardancy of PC was studied. The particles were characterized by transmission electron microscopy, zeta potential and contact angle analysis, combined with molecular dynamics simulation. Flame retardancy was evaluated by vertical combustion, limiting oxygen index and cone calorimetry. The results show that the addition of Al 2 O 3 has the best overall performance in terms of dispersibility and compatibility with PC, and the adsorption energy of the Al 2 O 3 /PC interface is the highest. The incorporation of Al 2 O 3 , SiO 2 , TiO 2 and ZrO 2 improves the flame retardancy of PC. Compared with pure PC, the incorporation of Al 2 O 3 significantly improves the thermal stability and residual mass of PC, resulting in a 21% increase in LOI and a 35% reduction in peak heat release rate. It is found that the compatibility of Al 2 O 3 particles with PC is the best, which can significantly improve its thermal stability and flame retardant performance, showing the best comprehensive performance. This method can be widely used in electronic, electrical and automotive fields, and can effectively improve the safety and reliability of materials.
- 30 November 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (8)
New Polycarbonate‐Based Composites With Added Inorganic Particles ( Al 2 O 3 , SiO 2 , TiO 2 , and ZrO 2 ): Effects on Mechanical Strength and Flame Retardancy
In this paper, a range of inorganic particles (Al 2 O 3 , SiO 2 , TiO 2 , and ZrO 2 ) is combined with PC to prepare composites, respectively. The effect of surface properties of inorganic particles on the flame retardancy of PC was studied. The particles were characterized by transmission electron microscopy, zeta potential and contact angle analysis, combined with molecular dynamics simulation. Flame retardancy was evaluated by vertical combustion, limiting oxygen index and cone calorimetry. The results show that the addition of Al 2 O 3 has the best overall performance in terms of dispersibility and compatibility with PC, and the adsorption energy of the Al 2 O 3 /PC interface is the highest. The incorporation of Al 2 O 3 , SiO 2 , TiO 2 and ZrO 2 improves the flame retardancy of PC. Compared with pure PC, the incorporation of Al 2 O 3 significantly improves the thermal stability and residual mass of PC, resulting in a 21% increase in LOI and a 35% reduction in peak heat release rate. It is found that the compatibility of Al 2 O 3 particles with PC is the best, which can significantly improve its thermal stability and flame retardant performance, showing the best comprehensive performance. This method can be widely used in electronic, electrical and automotive fields, and can effectively improve the safety and reliability of materials.
- 15 September 2025
- Published by Springer Nature in Chemical Research in Chinese Universities
- Vol. 42 (1) , 334-342
Efficient and Stable Perovskite Solar Cells with SnO2/TiO2 Bilayer Electron Transport Architectures
- 15 September 2025
- Published by Springer Nature in Chemical Research in Chinese Universities
- Vol. 42 (1) , 334-342
Efficient and Stable Perovskite Solar Cells with SnO2/TiO2 Bilayer Electron Transport Architectures
- Open Access
- 14 April 2025
- Published by World Scientific Pub Co Pte Ltd in Journal of Advanced Dielectrics
- Vol. 15 (06)
Advancements in the study of organic–inorganic hybrid materials and their application progress as flame retardants in polymeric materials
Polymers are widely used in numerous fields due to their excellent properties. However, the flammability of most polymer materials restricts their application in certain areas. To address this issue and meet the safety requirements of daily life, developing new, efficient and environmentally friendly flame-retardant materials has become an important research direction in the field of flame retardancy. Organic–inorganic hybrid materials combine the advantages of organic and inorganic materials, and through rational structural design, materials with both high strength and good toughness can be obtained. By incorporating organic–inorganic hybrid materials, the safety performance of polymer products can be significantly improved, reducing fire risks. After improving the flame-retardant properties of polymer materials, they can be applied in more stringent scenarios, such as interior components of vehicles and building insulation materials. In summary, organic–inorganic hybrid materials play a significant role in the flame-retardant domain of polymers due to their unique properties. With the development of materials science, the application prospects for these materials will be even broader. This paper reviews the preparation methods and related properties of organic–inorganic hybrid materials, as well as their applications in flame retardancy and other fields. Based on this, this paper further discusses the main technical challenges currently faced by organic–inorganic hybrid materials, such as dispersibility, compatibility, optical properties, etc., and proposes corresponding solutions along with future development trends.
- 14 April 2025
- Published by World Scientific Pub Co Pte Ltd in Journal of Advanced Dielectrics
- Vol. 15 (06)
Open AccessAdvancements in the study of organic–inorganic hybrid materials and their application progress as flame retardants in polymeric materials
Polymers are widely used in numerous fields due to their excellent properties. However, the flammability of most polymer materials restricts their application in certain areas. To address this issue and meet the safety requirements of daily life, developing new, efficient and environmentally friendly flame-retardant materials has become an important research direction in the field of flame retardancy. Organic–inorganic hybrid materials combine the advantages of organic and inorganic materials, and through rational structural design, materials with both high strength and good toughness can be obtained. By incorporating organic–inorganic hybrid materials, the safety performance of polymer products can be significantly improved, reducing fire risks. After improving the flame-retardant properties of polymer materials, they can be applied in more stringent scenarios, such as interior components of vehicles and building insulation materials. In summary, organic–inorganic hybrid materials play a significant role in the flame-retardant domain of polymers due to their unique properties. With the development of materials science, the application prospects for these materials will be even broader. This paper reviews the preparation methods and related properties of organic–inorganic hybrid materials, as well as their applications in flame retardancy and other fields. Based on this, this paper further discusses the main technical challenges currently faced by organic–inorganic hybrid materials, such as dispersibility, compatibility, optical properties, etc., and proposes corresponding solutions along with future development trends.
- Open Access
- 1 January 2025
- Published by IOP Publishing in Materials Research Express
- Vol. 12 (1) , 015304
Preparation and flame retardancy of an Al2O3 infiltration layer on polycarbonate surface
In this study, the surface flame retardancy of polycarbonate (PC) was improved and the impact of flame retardants on the substrate were minimized by pre-mixing Al2O3 particles with dichloromethane, an infiltration promoter, to form a suspension, and then treating PC with the suspension to form an Al2O3 infiltration layer. For this layer, its structure and composition were characterized, its flame retardancy was evaluated, and its flame retardancy mechanism was investigated. The characterization results confirmed that an Al2O3 infiltration layer was successfully prepared on the PC surface under the aid of dichloromethane and that the involvement of dichloromethane induced certain microscopic pores and voids in the PC, with some dichloromethane remaining within the surface infiltration layer. The surface Al2O3 infiltration layer mainly served as a condensed-phase flame retardant. The infiltration layer prepared using a suspension with a dichloromethane-to-Al2O3 mass ratio of 24:1 not only exhibited a good overall performance but also achieved the best improvement in the PC flame retardancy, such as an increase in the vertical burning rating from HB to V-0, as well as the LOI increased from 24 to 31.3, and a 35% reduction in the peak heat release rate compared to those of pure PC.
- 1 January 2025
- Published by IOP Publishing in Materials Research Express
- Vol. 12 (1) , 015304
Open AccessPreparation and flame retardancy of an Al2O3 infiltration layer on polycarbonate surface
In this study, the surface flame retardancy of polycarbonate (PC) was improved and the impact of flame retardants on the substrate were minimized by pre-mixing Al2O3 particles with dichloromethane, an infiltration promoter, to form a suspension, and then treating PC with the suspension to form an Al2O3 infiltration layer. For this layer, its structure and composition were characterized, its flame retardancy was evaluated, and its flame retardancy mechanism was investigated. The characterization results confirmed that an Al2O3 infiltration layer was successfully prepared on the PC surface under the aid of dichloromethane and that the involvement of dichloromethane induced certain microscopic pores and voids in the PC, with some dichloromethane remaining within the surface infiltration layer. The surface Al2O3 infiltration layer mainly served as a condensed-phase flame retardant. The infiltration layer prepared using a suspension with a dichloromethane-to-Al2O3 mass ratio of 24:1 not only exhibited a good overall performance but also achieved the best improvement in the PC flame retardancy, such as an increase in the vertical burning rating from HB to V-0, as well as the LOI increased from 24 to 31.3, and a 35% reduction in the peak heat release rate compared to those of pure PC.
- Open Access
- 1 November 2024
- Published by IOP Publishing in Materials Research Express
- Vol. 11 (11) , 115307
Study on the effect of modification methods and content of attapulgite on the flame retardancy of polybutylene terephthalate
This paper examines the influence of modification methods and the content of attapulgite (ATP) on the flame retardancy of polybutylene terephthalate (PBT). Different samples of ATP with varying modification methods and contents were blended with PBT to create composites. The composition, stability, flame retardancy, and mechanical properties of the composites were analyzed. The effect mechanism of ATP modification methods and content on the flame retardancy of PBT was analyzed. The results indicate that the addition of ATP enhanced the carbonization and flame retardancy of PBT. The addition of ATP reduced the impact strength of PBT. The inclusion of ball milled modified attapulgite (mp-ATP) resulted in an increase in the tensile strength of PBT. Furthermore, the inclusion of mp-ATP led to a mitigated decrease in the impact strength. The composites with 11%mp-ATP/PBT had the best comprehensive performance. Compared with pure PBT, the peak value of thermal release rate decreased by 70.2%, the total heat release decreased by 27.3%, and the tensile strength increased by 2.9%.
- 1 November 2024
- Published by IOP Publishing in Materials Research Express
- Vol. 11 (11) , 115307
Open AccessStudy on the effect of modification methods and content of attapulgite on the flame retardancy of polybutylene terephthalate
This paper examines the influence of modification methods and the content of attapulgite (ATP) on the flame retardancy of polybutylene terephthalate (PBT). Different samples of ATP with varying modification methods and contents were blended with PBT to create composites. The composition, stability, flame retardancy, and mechanical properties of the composites were analyzed. The effect mechanism of ATP modification methods and content on the flame retardancy of PBT was analyzed. The results indicate that the addition of ATP enhanced the carbonization and flame retardancy of PBT. The addition of ATP reduced the impact strength of PBT. The inclusion of ball milled modified attapulgite (mp-ATP) resulted in an increase in the tensile strength of PBT. Furthermore, the inclusion of mp-ATP led to a mitigated decrease in the impact strength. The composites with 11%mp-ATP/PBT had the best comprehensive performance. Compared with pure PBT, the peak value of thermal release rate decreased by 70.2%, the total heat release decreased by 27.3%, and the tensile strength increased by 2.9%.
- 8 September 2024
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 39 (2) , 188-208
Study on the epoxy bonding properties of polyphenylene sulfide matrix composites reinforced by montmorillonite and basalt fiber
- 8 September 2024
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 39 (2) , 188-208
Study on the epoxy bonding properties of polyphenylene sulfide matrix composites reinforced by montmorillonite and basalt fiber
- 17 August 2024
- Published by Taylor & Francis in Ferroelectrics
- Vol. 618 (11-12) , 2076-2088
Study of breakdown properties of SMA/MPPO composites
- 17 August 2024
- Published by Taylor & Francis in Ferroelectrics
- Vol. 618 (11-12) , 2076-2088
Study of breakdown properties of SMA/MPPO composites
- 17 August 2024
- Published by Taylor & Francis in Ferroelectrics
- Vol. 618 (11-12) , 2063-2075
Study on epoxy bonding properties of thermoplastic polyurethane/polyphenylene sulfide composites reinforced by surface-modified basalt fiber
- 17 August 2024
- Published by Taylor & Francis in Ferroelectrics
- Vol. 618 (11-12) , 2063-2075
Study on epoxy bonding properties of thermoplastic polyurethane/polyphenylene sulfide composites reinforced by surface-modified basalt fiber
- 23 March 2024
- Published by Taylor & Francis in Integrated Ferroelectrics
- Vol. 240 (3) , 584-598
Study on the Properties of Flame-Retardant Polybutylene Terephthalate with Ball-Milled Modified Attapulgite Synergistic Intumescent Flame Retardant
- 23 March 2024
- Published by Taylor & Francis in Integrated Ferroelectrics
- Vol. 240 (3) , 584-598
Study on the Properties of Flame-Retardant Polybutylene Terephthalate with Ball-Milled Modified Attapulgite Synergistic Intumescent Flame Retardant