Abdullah Huzeyfe Akca
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Abdullah Huzeyfe Akca has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Shiho Kawashima
Columbia University
3 shared publications - Onur Sahin
Civil Engineering Faculty, Davutpasa Campus, Yildiz Technical University, Istanbul 34220, Turkey
2 shared publications Siwei Ma
Department of Civil Engineering and Engineering Mechanics, Columbia University, New York, NY 10027
2 shared publications- Baoqi Chang
Department of Chemical Engineering, Columbia University, New York, NY 10027
1 shared publication Daniel Esposito
Associate Professor, Dept. of Chemical Engineering, Columbia Univ., New York, NY 10027
1 shared publication- Daniel V. Esposito
Columbia University in the City of New York
1 shared publication
Latest Publications
- Open Access
Innovative Lightweight Concrete with Carbonated Magnesium-Based Pellets
The construction industry requires sustainable building materials to reduce its environmental impact. While using these materials in newly constructed structures primarily focuses on environmental benefits, their application in the protection of architectural heritage presents an additional requirement. These materials must be physically and chemically compatible with historical substrates to ensure the longevity of the structure. Therefore, developing eco-friendly and compatible restoration materials is a significant concern. This study aims to produce artificial aggregates to develop lightweight concrete for structural interventions and reduce natural resource consumption (i.e., minimizing the destructive extraction of natural river sand and crushed stone aggregates). Magnesium-based binders were used to mimic the carbonation process of historical lime mortars. The binders were mixed with water, shaped into coarse pellets, and cured in a incubator for 3 and 14 days before being used in concrete production. The results show that using artificial aggregates decreased the concrete density by approximately 16.5%. Since reducing the dead load improves the seismic safety of historical masonry structures, this reduction is critical. Although the compressive strength decreased compared to natural aggregate concrete, the 14-day cured series achieved a strength of 34.7 MPa. This demonstrates that the material can be used in restoration interventions where stiffness compatibility is essential (e.g., vault infills, ring beams, or floor screeds). At the same time, since magnesium-based artificial lightweight pellets have sequestration capacity, they can be used as a carbon-negative solution for both historical structures and broader civil infrastructure.Open AccessInnovative Lightweight Concrete with Carbonated Magnesium-Based Pellets
The construction industry requires sustainable building materials to reduce its environmental impact. While using these materials in newly constructed structures primarily focuses on environmental benefits, their application in the protection of architectural heritage presents an additional requirement. These materials must be physically and chemically compatible with historical substrates to ensure the longevity of the structure. Therefore, developing eco-friendly and compatible restoration materials is a significant concern. This study aims to produce artificial aggregates to develop lightweight concrete for structural interventions and reduce natural resource consumption (i.e., minimizing the destructive extraction of natural river sand and crushed stone aggregates). Magnesium-based binders were used to mimic the carbonation process of historical lime mortars. The binders were mixed with water, shaped into coarse pellets, and cured in a incubator for 3 and 14 days before being used in concrete production. The results show that using artificial aggregates decreased the concrete density by approximately 16.5%. Since reducing the dead load improves the seismic safety of historical masonry structures, this reduction is critical. Although the compressive strength decreased compared to natural aggregate concrete, the 14-day cured series achieved a strength of 34.7 MPa. This demonstrates that the material can be used in restoration interventions where stiffness compatibility is essential (e.g., vault infills, ring beams, or floor screeds). At the same time, since magnesium-based artificial lightweight pellets have sequestration capacity, they can be used as a carbon-negative solution for both historical structures and broader civil infrastructure. - 29 December 2025
- Published by Cukurova Universitesi Muhendislik-Mimarlik Fakultesi Dergisi in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
- Vol. 40 (4) , 889-898
Effects Carbon Dioxide Curing on 3D Printed Cement Paste Incorporating Magnesium Oxide
Magnesium oxide cement is a promising alternative to Portland Cement considering its carbon capture ability. Hydration of magnesium oxide produces magnesium hydroxide with a low compressive strength. However, after carbon dioxide curing application significant strength development can be obtained. The efficiency of carbon dioxide curing depends mainly on the depth of carbonation which is related to the surface area/volume ratio. In this study, 3D printed specimens were produced in order to enhance the rate of carbon dioxide penetration. The compression tests and microstructural investigations (TGA, SEM, XRD) were conducted on the specimens. The compressive strength of carbonated 3D printed P0M100 specimens was 7 times higher that of air cured ones. According to microstructural investigations the main form of carbonated magnesium was found to be nesquehonite.
- 29 December 2025
- Published by Cukurova Universitesi Muhendislik-Mimarlik Fakultesi Dergisi in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
- Vol. 40 (4) , 889-898
Effects Carbon Dioxide Curing on 3D Printed Cement Paste Incorporating Magnesium Oxide
Magnesium oxide cement is a promising alternative to Portland Cement considering its carbon capture ability. Hydration of magnesium oxide produces magnesium hydroxide with a low compressive strength. However, after carbon dioxide curing application significant strength development can be obtained. The efficiency of carbon dioxide curing depends mainly on the depth of carbonation which is related to the surface area/volume ratio. In this study, 3D printed specimens were produced in order to enhance the rate of carbon dioxide penetration. The compression tests and microstructural investigations (TGA, SEM, XRD) were conducted on the specimens. The compressive strength of carbonated 3D printed P0M100 specimens was 7 times higher that of air cured ones. According to microstructural investigations the main form of carbonated magnesium was found to be nesquehonite.
- Open Access
- 15 September 2025
- Published by Black Sea Journal of Engineering and Science in Black Sea Journal of Engineering and Science
- Vol. 8 (5) , 1349-1357
Bina Zarfının Renk Koyuluğunun Binanın TS 825’e Göre Hesaplanan Yıllık Enerji İhtiyacı Üzerindeki Etkisi
Enerjiye olan talep her geçen gün arttığı için enerji kullanımını daha sürdürülebilir hale getirmek adına çalışmalar ve yönetmelikler yapılmaktadır. Binaların ısıtma ve soğutma enerjisi ihtiyacının karşılanması ciddi kaynak tüketimine ve çevresel sorunlara sebep olmaktadır. Bu sebeple binaların ısıtma ve soğutma enerjisi tüketiminin daha verimli ve sürdürülebilir olması için TS 825 – Binalarda Isı Yalıtımı Kuralları Standardı 2024 tarihinde güncellenmiştir. Son güncellemeyle yalıtım projelerine soğutma enerjisi talebi de dahil edilmiş olup bina zarfının renk koyuluğunun güneş enerjisi kazançları hesaplarında dikkate alınması istenmiştir. Bu çalışmada opak elemanların renk tercihinin bina enerji tüketimi üzerindeki etkilerinin incelenmesi hedeflenmiştir. Bunun için İzmir’deki ve Ankara’daki iki özdeş binanın farklı renk koyuluğu kombinasyonundaki yıllık ısıtma ve soğutma enerjisi talepleri hesaplanmıştır. Sonuçlar bina zarfının renk tonundaki koyulaşmanın toplam yıllık enerji tüketimini sıcak bölgede % 9,3’e kadar artırdığını göstermiştir. Renk koyulaşması ile soğutma enerjisi talebinin ısıtma enerjisindeki talebe göre daha çok arttığı anlaşılmıştır. Ayrıca duvar yüzeylerindeki renk koyulaşmasının çatı örtüsündeki renk koyulaşmasına göre enerji talepleri üzerinde daha belirgin bir etkisi olduğu görülmüştür.
- 15 September 2025
- Published by Black Sea Journal of Engineering and Science in Black Sea Journal of Engineering and Science
- Vol. 8 (5) , 1349-1357
Open AccessBina Zarfının Renk Koyuluğunun Binanın TS 825’e Göre Hesaplanan Yıllık Enerji İhtiyacı Üzerindeki Etkisi
Enerjiye olan talep her geçen gün arttığı için enerji kullanımını daha sürdürülebilir hale getirmek adına çalışmalar ve yönetmelikler yapılmaktadır. Binaların ısıtma ve soğutma enerjisi ihtiyacının karşılanması ciddi kaynak tüketimine ve çevresel sorunlara sebep olmaktadır. Bu sebeple binaların ısıtma ve soğutma enerjisi tüketiminin daha verimli ve sürdürülebilir olması için TS 825 – Binalarda Isı Yalıtımı Kuralları Standardı 2024 tarihinde güncellenmiştir. Son güncellemeyle yalıtım projelerine soğutma enerjisi talebi de dahil edilmiş olup bina zarfının renk koyuluğunun güneş enerjisi kazançları hesaplarında dikkate alınması istenmiştir. Bu çalışmada opak elemanların renk tercihinin bina enerji tüketimi üzerindeki etkilerinin incelenmesi hedeflenmiştir. Bunun için İzmir’deki ve Ankara’daki iki özdeş binanın farklı renk koyuluğu kombinasyonundaki yıllık ısıtma ve soğutma enerjisi talepleri hesaplanmıştır. Sonuçlar bina zarfının renk tonundaki koyulaşmanın toplam yıllık enerji tüketimini sıcak bölgede % 9,3’e kadar artırdığını göstermiştir. Renk koyulaşması ile soğutma enerjisi talebinin ısıtma enerjisindeki talebe göre daha çok arttığı anlaşılmıştır. Ayrıca duvar yüzeylerindeki renk koyulaşmasının çatı örtüsündeki renk koyulaşmasına göre enerji talepleri üzerinde daha belirgin bir etkisi olduğu görülmüştür.
- Open Access
- 22 August 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (17) , 9264
The Effects of Carbonation and Elevated Temperatures on the Properties of Magnesium-Based Mortar
Reactive MgO cement can substitute Portland cement in constructions for numerous purposes. While hydration of MgO yields a low-strength material, incorporation of additives, CO2 and heat curing can improve strength development. This study highlights how curing conditions and additives affect reactive MgO cements under elevated temperatures, providing key insights for enhancing sustainable construction materials with lower carbon footprints. Therefore, mortar mixtures were carbonated in a CO2 incubator for 3–14 days utilizing reactive MgO cement as a binder. Sodium carbonate and sodium bicarbonate were separately incorporated into mixtures to investigate their influence on compressive strength and microstructure. Elevated temperatures were also tested on carbonated magnesium-based material. Carbon dioxide curing enhanced compressive strengths and the reference carbonated group reached 20.1 MPa at the 14th day of curing. Sodium carbonate reduced the hydration rate and compressive strength, while air-cured mortar with sodium carbonate solution had the lowest compressive strength. However, sodium bicarbonate increased the strength of air-cured specimens. The specimens heated to 50 °C demonstrated a 35% increase in compressive strength, while temperatures of 100 °C or above led to a decline in strength. Hydration of MgO produced brucite and carbonation formed dypingite in the specimens’ microstructure. Temperature rise led to the disintegration of dypingite and rthe reappearanceof MgO.
- 22 August 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (17) , 9264
Open AccessThe Effects of Carbonation and Elevated Temperatures on the Properties of Magnesium-Based Mortar
Reactive MgO cement can substitute Portland cement in constructions for numerous purposes. While hydration of MgO yields a low-strength material, incorporation of additives, CO2 and heat curing can improve strength development. This study highlights how curing conditions and additives affect reactive MgO cements under elevated temperatures, providing key insights for enhancing sustainable construction materials with lower carbon footprints. Therefore, mortar mixtures were carbonated in a CO2 incubator for 3–14 days utilizing reactive MgO cement as a binder. Sodium carbonate and sodium bicarbonate were separately incorporated into mixtures to investigate their influence on compressive strength and microstructure. Elevated temperatures were also tested on carbonated magnesium-based material. Carbon dioxide curing enhanced compressive strengths and the reference carbonated group reached 20.1 MPa at the 14th day of curing. Sodium carbonate reduced the hydration rate and compressive strength, while air-cured mortar with sodium carbonate solution had the lowest compressive strength. However, sodium bicarbonate increased the strength of air-cured specimens. The specimens heated to 50 °C demonstrated a 35% increase in compressive strength, while temperatures of 100 °C or above led to a decline in strength. Hydration of MgO produced brucite and carbonation formed dypingite in the specimens’ microstructure. Temperature rise led to the disintegration of dypingite and rthe reappearanceof MgO.
- Open Access
- 2 August 2024
- Published by Elsevier in Engineering Science and Technology, an International Journal
- Vol. 56
Mechanical and microstructural investigations on concrete of the collapsed buildings after Kahramanmaraş earthquakes
- 2 August 2024
- Published by Elsevier in Engineering Science and Technology, an International Journal
- Vol. 56
Open AccessMechanical and microstructural investigations on concrete of the collapsed buildings after Kahramanmaraş earthquakes
- Open Access
- 16 August 2022
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 119 (34)
Carbon-negative cement manufacturing from seawater-derived magnesium feedstocks
This study describes and demonstrates key steps in a carbon-negative process for manufacturing cement from widely abundant seawater-derived magnesium (Mg) feedstocks. In contrast to conventional Portland cement, which starts with carbon-containing limestone as the source material, the proposed process uses membrane-free electrolyzers to facilitate the conversion of carbon-free magnesium ions (Mg 2+ ) in seawater into magnesium hydroxide [Mg(OH) 2 ] precursors for the production of Mg-based cement. After a low-temperature carbonation curing step converts Mg(OH) 2 into magnesium carbonates through reaction with carbon dioxide (CO 2 ), the resulting Mg-based binders can exhibit compressive strength comparable to that achieved by Portland cement after curing for only 2 days. Although the proposed “cement-from-seawater” process requires similar energy use per ton of cement as existing processes and is not currently suitable for use in conventional reinforced concrete, its potential to achieve a carbon-negative footprint makes it highly attractive to help decarbonize one of the most carbon-intensive industries.
- 16 August 2022
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 119 (34)
Open AccessCarbon-negative cement manufacturing from seawater-derived magnesium feedstocks
This study describes and demonstrates key steps in a carbon-negative process for manufacturing cement from widely abundant seawater-derived magnesium (Mg) feedstocks. In contrast to conventional Portland cement, which starts with carbon-containing limestone as the source material, the proposed process uses membrane-free electrolyzers to facilitate the conversion of carbon-free magnesium ions (Mg 2+ ) in seawater into magnesium hydroxide [Mg(OH) 2 ] precursors for the production of Mg-based cement. After a low-temperature carbonation curing step converts Mg(OH) 2 into magnesium carbonates through reaction with carbon dioxide (CO 2 ), the resulting Mg-based binders can exhibit compressive strength comparable to that achieved by Portland cement after curing for only 2 days. Although the proposed “cement-from-seawater” process requires similar energy use per ton of cement as existing processes and is not currently suitable for use in conventional reinforced concrete, its potential to achieve a carbon-negative footprint makes it highly attractive to help decarbonize one of the most carbon-intensive industries.
- 1 May 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 34 (5) , 04022056
Evaluation of Mechanical Performance of Compacted Magnesium Hydroxide after Carbonation Curing
In this study, the potential to directly use magnesium hydroxide as an alternative binder was investigated. A compaction molding technique was employed, where magnesium hydroxide powder was mixed with water at relatively low water-to-binder ratios, compacted in a mold, then subjected to accelerated curing at room temperature to form a carbonate binder. The influence of water-to-binder ratio and compaction pressure on the mechanical and microstructural properties of compacted magnesium hydroxide systems under accelerated curing was evaluated. Results showed that compaction pressure and water-to-binder ratio have a significant effect on uptake and strength development. An optimum compaction level was found to be 3 MPa in this study, where compressive strengths of and were reached after 2 and 5 days of curing. Results highlight the potential to tailor the mechanical properties of magnesium hydroxide systems through processing, and to reach strengths comparable to those of magnesium oxide systems but with the advantage of skipping the calcination step and reducing water demand.- 1 May 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 34 (5) , 04022056
Evaluation of Mechanical Performance of Compacted Magnesium Hydroxide after Carbonation Curing
In this study, the potential to directly use magnesium hydroxide as an alternative binder was investigated. A compaction molding technique was employed, where magnesium hydroxide powder was mixed with water at relatively low water-to-binder ratios, compacted in a mold, then subjected to accelerated curing at room temperature to form a carbonate binder. The influence of water-to-binder ratio and compaction pressure on the mechanical and microstructural properties of compacted magnesium hydroxide systems under accelerated curing was evaluated. Results showed that compaction pressure and water-to-binder ratio have a significant effect on uptake and strength development. An optimum compaction level was found to be 3 MPa in this study, where compressive strengths of and were reached after 2 and 5 days of curing. Results highlight the potential to tailor the mechanical properties of magnesium hydroxide systems through processing, and to reach strengths comparable to those of magnesium oxide systems but with the advantage of skipping the calcination step and reducing water demand.- Open Access
- 30 April 2020
- Published by Alconpat Internacional in Revista ALCONPAT
- Vol. 10 (2) , 219-229
Image analysis on disintegrated concrete at the post-heating stage
The relation between crack growth and reduction in the compressive strength after high temperature exposure and after air re-curing was investigated in this study. Concrete specimens were heated to 1000 ºC and they were subjected to air re-curing for 28 days. During re-curing period, their heated surfaces were monitored by using a digital single-lens reflex camera and the images were analyzed by using image analysis software. After cooling, the maximum reduction in the compressive strength of concrete was 49.5% and that of air re-cured concrete was 66.8%. Image analyses showed high correlations between crack growth and reduction in the compressive strength. This non-destructive method has the potential to represent the extent of damage in concrete after high temperature exposure. Keywords: high temperature; fiber reinforced concrete; deterioration; crack development; black pixel analysis.
- 30 April 2020
- Published by Alconpat Internacional in Revista ALCONPAT
- Vol. 10 (2) , 219-229
Open AccessImage analysis on disintegrated concrete at the post-heating stage
The relation between crack growth and reduction in the compressive strength after high temperature exposure and after air re-curing was investigated in this study. Concrete specimens were heated to 1000 ºC and they were subjected to air re-curing for 28 days. During re-curing period, their heated surfaces were monitored by using a digital single-lens reflex camera and the images were analyzed by using image analysis software. After cooling, the maximum reduction in the compressive strength of concrete was 49.5% and that of air re-cured concrete was 66.8%. Image analyses showed high correlations between crack growth and reduction in the compressive strength. This non-destructive method has the potential to represent the extent of damage in concrete after high temperature exposure. Keywords: high temperature; fiber reinforced concrete; deterioration; crack development; black pixel analysis.