Siphesihle Mpho Motsa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Siphesihle Mpho Motsa has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Georgios E. Stavroulakis
Institute of Computational Mechanics and Optimization, School of Production Engineering and Management, Technical University of Crete, GR-73100 Chania, Greece
5 shared publications - Georgios A. Drosopoulos
Department of Civil Engineering, International Hellenic University, Serres, Greece
4 shared publications - Maria E. Stavroulaki
Technical University of Crete
3 shared publications Emmanuel Maravelakis
Associate Professor, Dept. of Electronic Engineering, Hellenic Mediterranean Univ., Chania GR-73100, Greece
2 shared publicationsGeorgios A. Drosopoulos
2 shared publicationsPauline Galea
2 shared publications
Latest Publications
- Open Access
- 25 December 2023
- Published by MDPI AG in Infrastructures
- Vol. 9 (1) , 5
Prediction of the Response of Masonry Walls under Blast Loading Using Artificial Neural Networks
A methodology to predict key aspects of the structural response of masonry walls under blast loading using artificial neural networks (ANN) is presented in this paper. The failure patterns of masonry walls due to in and out-of-plane loading are complex due to the potential opening and sliding of the mortar joint interfaces between the masonry stones. To capture this response, advanced computational models can be developed requiring a significant amount of resources and computational effort. The article uses an advanced non-linear finite element model to capture the failure response of masonry walls under blast loads, introducing unilateral contact-friction laws between stones and damage mechanics laws for the stones. Parametric finite simulations are automatically conducted using commercial finite element software linked with MATLAB R2019a and Python. A dataset is then created and used to train an artificial neural network. The trained neural network is able to predict the out-of-plane response of the masonry wall for random properties of the blast load (standoff distance and weight). The results indicate that the accuracy of the proposed framework is satisfactory. A comparison of the computational time needed for a single finite element simulation and for a prediction of the out-of-plane response of the wall by the trained neural network highlights the benefits of the proposed machine learning approach in terms of computational time and resources. Therefore, the proposed approach can be used to substitute time consuming explicit dynamic finite element simulations and used as a reliable tool in the fast prediction of the masonry response under blast actions.
- 25 December 2023
- Published by MDPI AG in Infrastructures
- Vol. 9 (1) , 5
Open AccessPrediction of the Response of Masonry Walls under Blast Loading Using Artificial Neural Networks
A methodology to predict key aspects of the structural response of masonry walls under blast loading using artificial neural networks (ANN) is presented in this paper. The failure patterns of masonry walls due to in and out-of-plane loading are complex due to the potential opening and sliding of the mortar joint interfaces between the masonry stones. To capture this response, advanced computational models can be developed requiring a significant amount of resources and computational effort. The article uses an advanced non-linear finite element model to capture the failure response of masonry walls under blast loads, introducing unilateral contact-friction laws between stones and damage mechanics laws for the stones. Parametric finite simulations are automatically conducted using commercial finite element software linked with MATLAB R2019a and Python. A dataset is then created and used to train an artificial neural network. The trained neural network is able to predict the out-of-plane response of the masonry wall for random properties of the blast load (standoff distance and weight). The results indicate that the accuracy of the proposed framework is satisfactory. A comparison of the computational time needed for a single finite element simulation and for a prediction of the out-of-plane response of the wall by the trained neural network highlights the benefits of the proposed machine learning approach in terms of computational time and resources. Therefore, the proposed approach can be used to substitute time consuming explicit dynamic finite element simulations and used as a reliable tool in the fast prediction of the masonry response under blast actions.
- 28 September 2023
- Published by Elsevier in Engineering Structures
- Vol. 296
A data-driven, machine learning scheme used to predict the structural response of masonry arches
- 28 September 2023
- Published by Elsevier in Engineering Structures
- Vol. 296
A data-driven, machine learning scheme used to predict the structural response of masonry arches
- Open Access
Linear and Nonlinear Earthquake Analysis for Strength Evaluation of Masonry Monument of Neoria
An evaluation of the seismic behavior of a massive masonry monument with vaults, namely, the Neoria complex at the old port of Chania, is presented here. The usage of modal response analysis requires the combination of many eigenmodes in order to capture the required amount of vibration energy. Alternatively, a number of earthquakes can be used within a time domain response analysis in order to evaluate the response and, subsequently, the strength of the structure. Results of linear analysis are compared here, since this is what is required from current seismic codes. A nonlinear analysis with adequate material models will also be presented in order to demonstrate a comparison with linear analysis and a prediction of damage appearance under ultimate conditions. From the present investigation, it is shown that the results of the modal analysis and the linear time-step analysis are comparable. Therefore, some confidence is gained towards using the results for the design of strengthening and rehabilitation studies. Nonlinear models are very sensitive with respect to design earthquakes and material models. Therefore, at this stage, their results are used for the identification of areas where interventions must be performed very carefully.
Open AccessLinear and Nonlinear Earthquake Analysis for Strength Evaluation of Masonry Monument of Neoria
An evaluation of the seismic behavior of a massive masonry monument with vaults, namely, the Neoria complex at the old port of Chania, is presented here. The usage of modal response analysis requires the combination of many eigenmodes in order to capture the required amount of vibration energy. Alternatively, a number of earthquakes can be used within a time domain response analysis in order to evaluate the response and, subsequently, the strength of the structure. Results of linear analysis are compared here, since this is what is required from current seismic codes. A nonlinear analysis with adequate material models will also be presented in order to demonstrate a comparison with linear analysis and a prediction of damage appearance under ultimate conditions. From the present investigation, it is shown that the results of the modal analysis and the linear time-step analysis are comparable. Therefore, some confidence is gained towards using the results for the design of strengthening and rehabilitation studies. Nonlinear models are very sensitive with respect to design earthquakes and material models. Therefore, at this stage, their results are used for the identification of areas where interventions must be performed very carefully.
- 1 July 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 27 (7) , 04022053
Structural Investigation of Masonry Arch Bridges Using Various Nonlinear Finite-Element Models
This article presents an investigation of the structural behavior of a masonry arch bridge in Turkey. An analytical study has been conducted to provide the geometry of the structure, using laser scanning. A point cloud describing the geometry was obtained and properly transformed into a format that is appropriate for structural analysis software (CAE). Then, nonlinear finite-element models were developed to simulate structural responses of the bridge. The goal of the article is to highlight the influence of both continuum and discrete approaches and related constitutive laws on the responses of the bridge. Thus, continuum damage laws and a discrete model consisting of unilateral contact–friction interfaces were developed. Different load cases were tested and a comparison between the results obtained from the different approaches was considered. The failure mechanisms and the ultimate strengths were derived, and core points of the models were highlighted. The output of this work shows how the different failure models predict the behavior of the masonry arches. It also shows that the three-hinge mechanism, which has been depicted in classical studies for single-span arch masonry bridges under a horizontal settlement of supports, may also be obtained for multiarch bridges. Similarly, downward, vertical settlement of supports may result in the development of two hinges, as in single-span arches. Finally, the beneficial influence of the backfill in limiting the failure in the arch is addressed.
- 1 July 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 27 (7) , 04022053
Structural Investigation of Masonry Arch Bridges Using Various Nonlinear Finite-Element Models
This article presents an investigation of the structural behavior of a masonry arch bridge in Turkey. An analytical study has been conducted to provide the geometry of the structure, using laser scanning. A point cloud describing the geometry was obtained and properly transformed into a format that is appropriate for structural analysis software (CAE). Then, nonlinear finite-element models were developed to simulate structural responses of the bridge. The goal of the article is to highlight the influence of both continuum and discrete approaches and related constitutive laws on the responses of the bridge. Thus, continuum damage laws and a discrete model consisting of unilateral contact–friction interfaces were developed. Different load cases were tested and a comparison between the results obtained from the different approaches was considered. The failure mechanisms and the ultimate strengths were derived, and core points of the models were highlighted. The output of this work shows how the different failure models predict the behavior of the masonry arches. It also shows that the three-hinge mechanism, which has been depicted in classical studies for single-span arch masonry bridges under a horizontal settlement of supports, may also be obtained for multiarch bridges. Similarly, downward, vertical settlement of supports may result in the development of two hinges, as in single-span arches. Finally, the beneficial influence of the backfill in limiting the failure in the arch is addressed.
- Open Access
- 24 February 2022
- Published by Elsevier in Developments in the Built Environment
- Vol. 10, 100069
Modelling, identification and structural damage investigation of the Neoria monument in Chania
- 24 February 2022
- Published by Elsevier in Developments in the Built Environment
- Vol. 10, 100069
Open AccessModelling, identification and structural damage investigation of the Neoria monument in Chania
- 1 January 2020
- Published by Elsevier in Journal of Cultural Heritage
- Vol. 41, 96-105
Structural investigation of Mnajdra megalithic monument in Malta
- 1 January 2020
- Published by Elsevier in Journal of Cultural Heritage
- Vol. 41, 96-105
Structural investigation of Mnajdra megalithic monument in Malta
- 21 August 2019
- Published by Taylor & Francis
- p. 2160-2164
Large-scale contact analysis for the stability estimation of the Mnajdra monuments
The Maltese Megalithic Temples, are among the oldest free-standing structures of such complexity in the world. The Mnajdra megalithic structures, date to the 4th millennium BCE, are of international significance as a UNESCO World Heritage site. The appraisal of structural performance is necessary to safeguard these monuments. Towards this direction, assessment of the material properties of Mnajdra megalithic monument in Malta is considered by means of finite element analysis and comparison with experimental research. First, the geometry of the monument has been imported from laser-scanner data provided by the local authorities. Then, experimental microtremor measurements are compared with parametric eigenvalue finite element analysis, for the determination of the proper material properties.
- 21 August 2019
- Published by Taylor & Francis
- p. 2160-2164
Large-scale contact analysis for the stability estimation of the Mnajdra monuments
The Maltese Megalithic Temples, are among the oldest free-standing structures of such complexity in the world. The Mnajdra megalithic structures, date to the 4th millennium BCE, are of international significance as a UNESCO World Heritage site. The appraisal of structural performance is necessary to safeguard these monuments. Towards this direction, assessment of the material properties of Mnajdra megalithic monument in Malta is considered by means of finite element analysis and comparison with experimental research. First, the geometry of the monument has been imported from laser-scanner data provided by the local authorities. Then, experimental microtremor measurements are compared with parametric eigenvalue finite element analysis, for the determination of the proper material properties.
- Open Access
- 23 September 2018
- Published by Gruppo Italiano Frattura in Fracture and Structural Integrity
- Vol. 12 (46) , 124-139
Failure behaviour of a fire protected steel element
In the present article the failure behaviour of a steel, beam type element supported against fire by protection boards, is studied. Three – dimensional, coupled temperature - displacement, non-linear finite element analysis models have been developed to simulate the unprotected and protected structure. A simple modelling approach is proposed for the investigation of the influence of the gradual failure of fire protection at elevated temperatures, on the structural performance of the system, under thermal and mechanical loads. Yielding of steel is depicted and force – displacement diagrams are used to evaluate the ultimate behaviour of the unprotected and protected models. It is shown that for the protected structure, yielding is less severe and the time period up to maximum strength is significantly longer. Eventually, is depicted how failure of the fire protection leads to a gradual reduction of the response, in fire conditions.
- 23 September 2018
- Published by Gruppo Italiano Frattura in Fracture and Structural Integrity
- Vol. 12 (46) , 124-139
Open AccessFailure behaviour of a fire protected steel element
In the present article the failure behaviour of a steel, beam type element supported against fire by protection boards, is studied. Three – dimensional, coupled temperature - displacement, non-linear finite element analysis models have been developed to simulate the unprotected and protected structure. A simple modelling approach is proposed for the investigation of the influence of the gradual failure of fire protection at elevated temperatures, on the structural performance of the system, under thermal and mechanical loads. Yielding of steel is depicted and force – displacement diagrams are used to evaluate the ultimate behaviour of the unprotected and protected models. It is shown that for the protected structure, yielding is less severe and the time period up to maximum strength is significantly longer. Eventually, is depicted how failure of the fire protection leads to a gradual reduction of the response, in fire conditions.