TATimofey Averianov

Timofey Averianov

*This is an algorithmically generated author record based on publicly available information.

Timofey Averianov has a total of 41 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Evolution of electrochemical redox activity and capacity in vanadium-enriched solid-solution MXene-derived oxides for Li-ion batteries

    by Timofey Averianov, Michael J. Zachman, Xinle Zhang, Yash Athreya, Derick Phan, Ekaterina Pomerantseva

  • Open Access

    Solid-State Nuclear Magnetic Resonance Insights into the Precursor-Dependent Structure and Na-Ion Storage Behavior of Na-Preintercalated Bilayered Vanadium Oxides

    by Xinle Zhang, Timofey Averianov, Mina Mozafari, Phillip Stallworth, Dmitri Barbash, Steven G. Greenbaum, Ekaterina Pomerantseva

    Chemically preintercalated bilayered vanadium oxide (BVO) electrodes derived from V2CTx MXene exhibit superior Na-ion storage performance compared to compositionally similar BVO counterparts synthesized from α-V2O5 powder. Here, we report for the first time the precursor-dependent structural differences in Na-preintercalated BVO electrodes (δ-NaxV2O5·nH2O) synthesized from α-V2O5 powder (AD-NVO) and V2CTx MXene nanoflakes (MD-NVO) and show how these differences govern their electrochemical behavior in a nonaqueous Na-ion energy storage system. Our analyses show that AD-NVO and MD-NVO exhibit distinct compositions of δ-Na0.37V2O5·0.46H2O and δ-Na0.33V2O5·0.21H2O, respectively, along with pronounced differences in morphology, electronic structure, and interlayer chemistry. Scanning electron microscopy reveals the formation of 1D nanobelts for AD-NVO, whereas MD-NVO consists of 2D nanoflakes assembled into nanoflower-like agglomerates. X-ray photoelectron spectroscopy indicates that Na preintercalation led to different extents of V5+ to V4+ reduction in AD-NVO and MD-NVO, attributed to differences in the structural water content, which was further supported by the V4+ content quantification via electron paramagnetic resonance. Electrochemical measurements show fundamentally different charge storage behaviors: AD-NVO exhibits largely capacitive responses, while MD-NVO displays pronounced Na+ redox activity and delivers a higher specific capacity, improved rate capability, and superior cycling stability. Magic-angle spinning 23Na solid-state NMR identifies two distinct interlayer Na environments in MD-NVO, in contrast to a single Na site in AD-NVO. These sites play complementary roles, with one facilitating Na+ transport and the other acting as stabilizing pillars, as confirmed by ex situ X-ray diffraction. This study reveals how precursor-dependent structural evolution in chemically preintercalated layered oxides governs interlayer chemistry and electrochemical function, providing design principles for engineering layered metal oxides for advanced energy storage.

  • Open Access

    Evolution of Electrochemical Redox Activity and Capacity in Vanadium-Enriched Solid-Solution MXene-Derived Oxides for Li-Ion Batteries

    by Timofey Averianov, Michael J. Zachman, Xinle Zhang, Yash Athreya, Derick Phan, Ekaterina Pomerantseva

    Solid-solution MXenes emerged as promising precursors for the synthesis of bilayered vanadium oxides (BVOs), offering the ability to introduce multiple transition metals and tune electrochemical properties. However, limited understanding of transition metal site incorporation in the resulting oxides has hindered reliable design. Here, we report the transformation of vanadium-enriched (NbyV2-y)CTx (y = 0.00, 0.25, 0.50) MXenes into MXene-derived BVOs via a two-step dissolution–recrystallization process. Increasing Nb content in the precursor leads to more polycrystalline oxides, reflecting cation size mismatch and its effect on long-range particle growth. Electrochemical testing of (NbyV2-y)CTx-derived oxides in non-aqueous Li-ion cells reveals new redox features at lower potentials and higher charge storage capacities, reaching up to 495 mAh g⁻¹ at 20 mA g⁻¹ (1.0–4.0 V) for the Nb0.50V1.50CTx-derived oxide, along with enhanced rate capability. Atomic-level characterization confirms uniform Nb distribution, indicating that Nb forms substitutional defects within the bilayers which, for the first time, leads to intralayer Nb-doped BVO with superior electrochemical activity relative to the parent phase. These findings demonstrate that solid-solution MXenes enable heterogeneous atom doping directly within the layered framework, offering a powerful route to novel doped oxides with enhanced functional properties beyond those achievable by conventional methods.

  • Understanding the role of MXenes as synthetic precursors for advanced energy storage materials

    by Timofey Kirillovich Averianov, Ekaterina Pomerantseva

    Secondary batteries have been identified as a critical technology for the pursuit of energy storage systems in conjunction with electrical energy generation methods. The technology has focused on the non-aqueous Li-ion battery, which has prevailed as the energy storage solution of choice due to the high energy and power densities that can be achieved. However, in the wake of environmental and society concerns brought by the sourcing and production of materials for Li-ion batteries, new materials and energy storage solutions are being pursued to enable operational diversity within the energy storage industry. Intercalation transition metal oxides are currently the material of choice for use as electrode active materials in battery applications, as their compositions and structures enable efficient cycling of charge carrying species during cycling. Bilayered vanadium oxide has been identified as a viable cathode active material through its high theoretical capacities and compositional tunability through chemical preintercalation. Their development has been marked by the use of transition metal carbides, or MXenes, as synthetic precursors, which have demonstrated enhanced electrochemical stability of the MXene-derived oxides in Li-ion batteries. Despite this, the conversion from MXene to oxide is still poorly understood, and their capabilities in beyond Li-ion systems has been limited in their demonstration.In this dissertation, I discuss the use of two-dimensional (2D) transition metal carbides (MXenes) as promising precursors for the synthesis of advanced oxide cathode materials for batteries. The nanoscale 2D morphologies and unique surface chemistries of MXenes enable facile transformation into high-performance oxides. First, I will show how modifying the MXene transition metal chemistry promotes new electrochemical behavior of derived oxides in lithium-ion batteries. Introducing multiple transition metals during MXene synthesis enables the doping of one transition metal into the oxide structure after conversion that unlocks new electrochemical behavior in Li-ion batteries. Second, I will demonstrate how etchant composition used for MXene synthesis causes downstream effects on electrochemical properties of MXene-derived oxides in potassium-ion batteries. The surface chemistry of MXene affects oxide properties after transformation, with proper etching control leading to better capacities and stability during K-ion cycling. Third, I will highlight how MXenes can transform into oxides with novel morphologies that enable high performance in aqueous zinc-ion batteries. Existing oxide compositions can be realized in new MXene-reliant forms that, with proper electrolyte selection, can lead to superior Zn-ion cycling performance. My findings show the versatility of MXene-based synthesis of promising active materials in advanced battery systems.

  • Open Access

    Operation of MXene-Derived Zinc-Preintercalated Bilayered Vanadium Oxide Cathode in Aqueous Zn-Ion Batteries

    by Timofey Averianov, Kyle Matthews, Xinle Zhang, Huyen T. K. Nguyen, Yuan Zhang, Yury Gogotsi, Ekaterina Pomerantseva

    Layered hydrated vanadium oxides, particularly those with bilayered structures, show remarkable electrochemical performance as cathodes for aqueous Zn-ion batteries (AZIBs). However, their wide-scale adoption is hindered by limited understanding of their charge storage mechanisms in different Zn-containing electrolytes. Here, we demonstrate the first synthesis of a MXene-derived Zn-preintercalated bilayered vanadium oxide (MD-ZVO) with a nanoflower-like morphology comprised of two-dimensional (2D) nanosheets, achieved via a two-step dissolution–recrystallization process. The strategic Zn2+ preintercalation establishes well-defined ion diffusion pathways, while the nanoflower-like assembly of 2D nanosheets enhances structural integrity, together contributing to improved electrochemical performance over other layered vanadium oxides. A systematic evaluation of four electrolytes (2 M ZnSO4, 2.6 M Zn­(OTf)2, 2 M ZnCl2, and 30 m ZnCl2) showed that MD-ZVO electrodes delivered high reversible capacities (450 and 315 mAh g–1 at 0.1 A g–1), excellent rate capability (223 mAh g–1 for both electrolytes at 1.0 A g–1), and good electrochemical stability (84% and 48% over 1000 cycles at 1.0 A g–1) in saturated 2.6 M Zn­(OTf)2 and highly concentrated 30 m ZnCl2, respectively. The material’s superior electrochemical stability in concentrated electrolytes is attributed to suppressed vanadium oxide dissolution during cycling. In situ and ex situ XRD analyses of MD-ZVO electrodes reveal larger contribution of Zn2+-associated species for charge storage in cells containing 2.6 M Zn­(OTf)2 and proton dominant charge transfer in cells containing 30 m ZnCl2. Additionally, the combination of in situ and ex situ characterization demonstrates the reversible formation of Zn x OTf y (OH)2x–y ·nH2O in cells using 2.6 M Zn­(OTf)2 and Zn5(OH)8Cl2·H2O in cells using 30 m ZnCl2 on the MD-ZVO electrode surface over extended cycling. This work highlights the superior performance of nanoflower MD-ZVO for cathodes in aqueous Zn-ion batteries, which benefits from the proper selection of highly concentrated electrolytes that enable better utilization of the cathode material.


  • Open Access

    MXene-Derived Potassium-Preintercalated Bilayered Vanadium Oxide Nanostructures for Cathodes in Nonaqueous K-Ion Batteries

    by Timofey Averianov, Xinle Zhang, Ryan Andris, Daniel Olds, Michael J. Zachman, Ekaterina Pomerantseva

    Bilayered vanadium oxides (BVOs) are promising cathode materials for beyond-Li-ion batteries due to their tunable chemistries and high theoretical capacities. However, the large size of beyond-Li+ ions limits electrochemical cycling and rate capability of BVO electrodes. Recent reports of MXene-derived BVOs with nanoscale flower-like morphology have shown improved electrochemical stability at high rates up to 5C in nonaqueous lithium-ion batteries. Here, we report how morphological stabilization can lead to improved rate capability in potassium-ion batteries (PIBs) through the synthesis and electrochemical characterization of MXene-derived K-preintercalated BVOs (MD-KVOs), which were derived from two V2CT x precursor materials prepared using two different etching protocols. We show that the etching conditions affect the surface chemistry of the MXene, which plays a role in the MXene-to-oxide transformation process. MXene derived from a milder etchant transformed into a nanoflower MD-KVO with two-dimensional (2D) nanosheet petals (KVO-DMAE) while a more aggressive etchant produced a MXene that transformed into a MD-KVO with one-dimensional (1D) nanorod morphology (KVO-CMAE). Electrochemical cycling of the produced MD-KVOs after drying at 200 °C under vacuum (KVO-DMAE-200 and KVO-CMAE-200) in PIBs showed that electrochemical stability of MD-KVO at high rates improved through the morphological stabilization of 2D particles combined with the control of interlayer water and K+ ion content. Structure refinement of KVO-DMAE-200 further corroborates the behavior observed during K+ ion cycling, connecting structural and compositional characteristics to the improved rate capability. This work demonstrates how proper synthetic methodology can cause downstream effects in the control of structure, chemical composition, and morphology of nanostructured layered oxide materials, which is necessary for development of future materials for beyond-Li-ion battery technologies.


  • Synthesis of 2D Solid-Solution (NbyV2–y)CTx MXenes and Their Transformation into Oxides for Energy Storage

    by Marcelo A. Andrade, Timofey Averianov, Christopher E. Shuck, Kateryna Shevchuk, Yury Gogotsi, Ekaterina Pomerantseva


  • Improving charge transport in integrated MoO3/C electrode materials for water-in-salt energy storage systems by incorporating oxygen vacancies

    by Farbod Alimohammadi, Darrell Omo-Lamai, Ryan Andris, Timofey Averianov, Zhongling Wang, Lei Wang, Kim Kisslinger, Esther S. Takeuchi, Amy C. Marschilok, Kenneth J. Takeuchi, et al.


  • Vanadium and Niobium MXenes—Bilayered V2O5 Asymmetric Supercapacitors

    by Mohit Saraf, Teng Zhang, Timofey Averianov, Christopher E. Shuck, Robert W. Lord, Ekaterina Pomerantseva, Yury Gogotsi

    MXenes offer high metallic conductivity and redox capacitance that are attractive for high‐power, high‐energy storage devices. However, they operate limitedly under high anodic potentials due to irreversible oxidation. Pairing them with oxides to design asymmetric supercapacitors may expand the voltage window and increase the energy storage capabilities. Hydrated lithium preintercalated bilayered V2O5 ( δ‐LixV2O5·nH2O) is attractive for aqueous energy storage due to its high Li capacity at high potentials; however, its poor cyclability remains a challenge. To overcome its limitations and achieve a wide voltage window and excellent cyclability, it is combined with V2C and Nb4C3 MXenes. Asymmetric supercapacitors employing lithium intercalated V2C (Li‐V2C) or tetramethylammonium intercalated Nb4C3 (TMA‐Nb4C3) MXenes as the negative electrode, and a δ‐LixV2O5·nH2O composite with carbon nanotubes as the positive electrode in 5 m LiCl electrolyte operate over wide voltage windows of 2 and 1.6 V, respectively. The latter shows remarkably high cyclability—capacitance retention of ≈95% after 10 000 cycles. This work highlights the importance of selecting appropriate MXenes to achieve a wide voltage window and a long cycle life in combination with oxide anodes to demonstrate the potential of MXenes beyond Ti3C2 in energy storage.