AAAbirami Arthanari

Abirami Arthanari

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Abirami Arthanari has a total of 31 co-authors. Here are the top co-authors by number of shared publications:

  • Vignesh Ravindran

    Department of Pedodontics and Preventive Dentistry, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Chennai, Tamil Nadu, India

    7 shared publications
  • Karthikeyan Ramalingam

    Department of Oral Pathology and Microbiology, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Chennai, IND

    6 shared publications
  • Lavanya Prathap

    Department of Anatomy, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Chennai, IND

    6 shared publications
  • Shanmathy Sureshbabu

    5 shared publications
  • Pratibha Ramani

    Department of Oral Pathology, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Chennai-77, India

    3 shared publications
  • A. Melvin George

    Department of Oral and Maxillofacial Surgery, Saveetha Dental College and Hospital, Saveetha Institute of Medical and Technical Sciences, SaveethaUniversity, Chennai, India

    2 shared publications

Latest Publications

  • Open Access

    In Vitro Evaluation of Neem Flower-mediated Selenium–curcumin Nano Formulation Incorporated into a Chitosan-based Formulation for Oral Applications

    by Abirami Arthanari, Anoop Kumar, Abilasha Ramasubramanian, S. Rajeshkumar

    Plant-mediated synthesis provides a green route for preparing selenium nanoparticles (SeNPs) using biological extracts as an alternative to conventional chemical synthesis. Neem flower extract contains phytochemicals that may participate in selenium precursor reduction and nanoparticle surface stabilization. Curcumin and chitosan are also of interest for experimental oral formulations because of their reported antioxidant, antimicrobial, and formulation-related properties. This study evaluated neem flower-mediated SeNPs and a selenium–curcumin nano formulation incorporated into a chitosan-based formulation, with emphasis on preliminary physicochemical characterization and in vitro biological activity. An aqueous neem flower extract was prepared and combined with sodium selenite to generate the SeNP preparation. Curcumin dissolved in dimethyl sulfoxide and diluted with water was combined with the SeNP preparation, and the resulting formulation was incorporated into a chitosan matrix. UV–visible spectroscopy, Fourier-transform infrared spectroscopy, and scanning electron microscopy were used for characterization. Antimicrobial activity was assessed against selected oral microorganisms, and preliminary biological evaluations, including DPPH radical-scavenging, brine shrimp, and zebrafish assays, were carried out. The synthesized nanomaterial showed an absorption at approximately 450 nm. The antimicrobial experiment demonstrated inhibition of the tested microorganisms, with larger inhibition zones at the highest tested sample volume and the largest zone reported for Staphylococcus aureus. Further investigation of neem-mediated SeNP and selenium–curcumin/chitosan formulations as experimental oral nanomaterials can be considered.

  • Open Access

    Green Synthesis of Silver Nanoparticles Using Althaea officinalis and Pterocarpus santalinus Formulation and its Anti-inflammatory and Antimicrobial Activity against Oral Wound Pathogen

    by Shanmathy Sureshbabu, Abirami Arthanari, RajeshKumar Shanmugam

    Green synthesis of silver nanoparticles (AgNPs) using plant-derived bioactive compounds has emerged as an environmentally friendly alternative to conventional chemical synthesis methods. Although several medicinal plants have been explored for nanoparticle synthesis, limited studies have investigated the combined use of Althaea officinalis and Pterocarpus santalinus extracts for the fabrication of AgNPs and evaluation of their biological activities. The objective of the study is to formulate a novel wound healing gel that can be used for oral wounds such as extraction sockets, surgical incisions, periodontal surgeries, etc. Therefore, the present study aimed to synthesize silver nanoparticles using aqueous extracts of A. officinalis and P. santalinus and to evaluate their in vitro antimicrobial and anti-inflammatory activities. Plant extracts obtained from Saveetha Dental College and Hospitals were used as reducing and stabilizing agents for the synthesis of AgNPs. Silver nanoparticles were synthesized by reacting the plant extracts with aqueous silver nitrate solution (1 mM concentration) under controlled conditions of temperature, pH, and incubation time. Nanoparticle formation was initially confirmed by UV–Visible spectroscopy, which showed a characteristic surface plasmon resonance peak at 450 nm. Antibacterial activity was evaluated against Candida albicans, Lactobacillus spp., Streptococcus mutans, and Staphylococcus aureus using the agar well diffusion method, and the zones of inhibition were measured in millimeters. The synthesized AgNPs exhibited inhibitory activity against all tested microorganisms, with mean zones of inhibition of 15 mm for C. albicans, 17 mm for Lactobacillus sp., 9 mm for S. mutans, and 17 mm for S. aureus. Anti-inflammatory activity was assessed using bovine serum albumin denaturation, egg albumin denaturation, and membrane stabilization assays. The synthesized AgNPs demonstrated concentration-dependent anti-inflammatory effects, with a maximum inhibition of approximately 75% in protein denaturation assays and 80% membrane stabilization activity. The findings suggest that A. officinalis and P. santalinus-mediated AgNPs possess in vitro antibacterial and anti-inflammatory properties.


  • Open Access

    A novel approach, exploring subgingival temperature changes over time since death: An animal study

    by Akshai Senthilkumar, Vignesh Ravindran, Abirami Arthanari, Jayalakshmi Somasundaram, Shaan Raj

    Background: Accurate estimation of the postmortem interval (PMI) is a crucial aspect of forensic investigations. Traditional methods rely on rectal temperature measurement, but alternative sites may provide more reliable measurements under certain conditions. The subgingival region, being a well-insulated anatomical site, has been considered for temperature-based assessments. However, no studies have explored its viability in PMI estimation. This study aims to assess subgingival temperature changes before and after euthanasia in rats and rabbits and compare them with rectal temperature variations. Understanding these temperature shifts could help clarify the forensic relevance of subgingival temperature as an alternative or complementary method for PMI estimation. Objective: To evaluate pre-euthanasia and posteuthanasia changes in subgingival and rectal temperatures in rats and rabbits. Materials and Methods: Based on a pilot study, the sample size was calculated ( n = 8), comprising four rabbits and four rats. Following ethical clearance, a specialized subgingival thermometer was designed for measuring subgingival temperature, whereas rectal temperature was recorded using a commercially available digital thermometer (Omron MC-246 Digital Thermometer). Pre-euthanasia subgingival and rectal temperatures were recorded, followed by a second measurement taken 10 min posteuthanasia. The obtained temperature values (°C) were subjected to statistical analysis using the Wilcoxon signed-rank test and Spearman’s rank correlation. Results: Subgingival temperature before euthanasia was the only statistically significant finding ( P = 0.010). In rats, a strong pre-euthanasia correlation between subgingival and rectal temperatures ( r = 1.000, P = 0.010) weakened markedly after death ( r = 0.200, P = 0.800). Conversely, rabbits exhibited a moderate correlation before euthanasia ( r = 0.600, P = 0.400), which strengthened postmortem ( r = 0.800, P = 0.200), indicating species-specific variations in heat retention and dissipation after death. Conclusion: Both subgingival and rectal temperatures decreased after euthanasia, confirming a postmortem temperature decline. However, the results were not statistically significant due to the small sample size. With further research overcoming these limitations, subgingival temperature could serve as a potential alternative for PMI estimation.

  • Open Access

    Various Age Estimation Methods Commonly Used In India Among Medical And Dental Experts

    by Srivatchava. S, Abirami Arthanari

    Introduction: Forensic age estimation is an expertise in the forensic odontology field which aims to show the most accurate way to find the chronological age of an individual. Age estimation from dental and skeletal remains is of interest to forensic experts to identify an unknown person's age. Radiography is the most commonly and easily available method to determine the age of an individual. Aim: The aim of the study was to know the various age estimation methods commonly used in India among Medical and Dental Experts.

  • Open Access

    Gender Determination Through Mandibular Features on Orthopantomograms: A Preliminary Study

    by Abirami Arthanari, Vignesh Ravindran, Karthikeyan Ramalingam, Lavanya Prathap, Shaan Raj


  • Open Access

    Gonial Angle in Forensic Anthropology to Determine Age and Gender: A Population-Specific Analysis

    by Sakshi Sikaria, Abirami Arthanari, Karthikeyan Ramalingam, Vignesh Ravindran, Lavanya Prathap

    Background The study highlights the gonial angle as a key craniofacial landmark for age and gender determination in forensic cases. It emphasizes population-specific analysis, enhancing precision by recognizing variations between populations. By clarifying the gonial angle's forensic use, the study offers clear guidelines, improving forensic practices. Moreover, the gonial angle and age and gender correlations are thoroughly examined, offering important information on their forensic relevance. The results highlight how crucial population-specific research is to improving the precision and dependability of forensic age and gender estimation techniques, which advances forensic anthropology and supports forensic investigations around the globe. Aim and objective The purpose of this study is to assess the accuracy of age and gender estimates using gonial angles. The objectives of this research are to evaluate the precision of age and gender estimates utilizing the gonial angle. Materials and methods This present study comprises two groups based on age groups: Group I belongs to 51 to 60 years of age, and Group II belongs to 61 to 70 years of age. Making use of G-Power software (version 3.1.9.4, Düsseldorf, Germany), the sample size was determined. The calculation ensured 95% statistical power at a significance level (alpha error probability) of 0.05. To achieve sufficient statistical power, a total of 1000 samples were included, with a projected required sample size of 92. A total of 1000 samples, consisting of 500 male and 500 female panoramic radiographs, were meticulously selected for the study. The samples picked were within the age range of 51 to 70 years. Orthopantomograms were determined using Planmeca software (Planmeca Romexis®, Version 6.0, USA Inc.). Descriptive statistics, including prediction classification analysis of age and gender, were conducted using SPSS Statistics version 16.0 (SPSS Inc., Released 2007, SPSS for Windows, Version 16.0, Chicago, SPSS Inc.). Results According to this study, the mean gonial angle of males aged 51 to 60 years is larger (124.7370 degrees) than that of females (119.6371 degrees). The female group's mean estimates are more accurate, as seen by the smaller standard error (0.20844) compared to the male group's (0.60998). A statistically significant difference in mean gonial angles between the genders is evident, with males having a larger gonial angle (p-value <0.001). In the age range of 61 to 70 years, the mean gonial angle of females is higher (128.4322 degrees) than that of males (124.0529 degrees). In this instance, the male group's standard error is smaller (0.14968) than the female group's (0.30028), indicating more accurate mean estimates. Once more, a statistically significant difference is indicated by a p-value of less than 0.001, with females having a larger gonial angle than males. Conclusion Our study revealed that the gonial angle of the mandible can be considered a reliable parameter for gender identification. The study's limitation is its inability to reliably identify gender in the subadult population and in cases of edentulousness. An orthopantomogram is a trustworthy and accurate method for taking the different measurements needed to identify the gender of a particular mandible.


  • Open Access

    Evaluation of Sexual Dimorphism Using Condylar and Coronoid Mandibular Parameters in Orthopantomograms: A Pilot Study

    by Abirami Arthanari, Shanmathy Sureshbabu, Karthikeyan Ramalingam, Vignesh Ravindran, Lavanya Prathap

    Background Gender determination is critical to forensic science and medico-legal applications. Given that it is the most dimorphic bone in the skull and is frequently found intact, the mandibular bone may be extremely important in determining gender. Orthopantomograms (OPGs) are quite helpful in accurately estimating age and sex in this regard. It is a laborious task for forensics to determine the gender of victims of mass casualties, natural disasters, and severely dismembered bodies. The mandible, which is susceptible to development spurts, has a high degree of accuracy for determining sex. Aim This study aims to evaluate the potential use of coronoid height and condylar height as reliable anatomical markers for determining gender. Materials and methods In this study, 100 samples were used as study samples, 50 of which were male and 50 of which were female, in the age group of 20-30 years. The OPGs were obtained using a Planmeca Promax Scara 3 Digital OPG Machine (Planmeca, Helsinki, Finland), with settings of 70 kVp, 8 mA for 0.9 seconds, ensuring a 1:1 ratio. The images were then transferred to Planmeca Romexis (R) Viewer Software, Version 6.0 (Planmeca Oy, Helsinki, Finland) for measurement recording. Results Descriptive statistical analysis was done for this study and discriminant analysis was also done to create a population-specific formula. Results showed that the standard mean error for males concerning condylar height was 2.3 and coronoid height was 0.7. The standard mean error for females by condylar height was 1.6 and coronoid height was 0.6. The p-value was significant for coronoid height in both males and females. The p-value was not clinically significant for condylar height in both males and females. Conclusion The study's findings indicate that a larger mandibular angle is advantageous for gender assessment and helps with gender dimorphism. Out of both the parameters evaluated, coronoid height has shown statistical significance in both males and females. Hence, the study concludes that the parameter, coronoid height can be utilized to assess the gender of an individual.


  • Open Access

    Quantifying Sexual Dimorphism by Analyzing Ramus Flexure and Bigonial Width in Orthopantomography

    by Abirami Arthanari, Shanmathy Sureshbabu, Karthikeyan Ramalingam, Vignesh Ravindran, Lavanya Prathap

    Introduction The mandible constitutes one of the skull's largest and strongest bones. Growth spurts can influence it, and it has a variety of dimorphic traits that can be used to identify sex. In addition to observing, comparing, and evaluating the potential for mandibular ramus flexure and bigonial breadth to discriminate between sexes using digital orthopantomograms (OPG), a retrospective study was conducted to examine the validity of this method for sex estimation in the Indian population. Aim and objective This study aims to quantify sexual dimorphism by analyzing two mandibular parameters, the ramus flexure and the bigonial width, using orthopantomography (OPG). The objective is to determine the accuracy of sex determination using the ramus flexure and bigonial width. Materials and methods A total of 500 OPG images (250 males and 250 females) were analyzed using the Planmeca software (Helsinki, Finland). The ramus flexure was measured as the angle formed between the tangent to the inferior border of the mandible and the tangent to the posterior border of the ramus. The bigonial width was measured as the distance between the left and right gonion points. A statistical analysis was performed to assess sexual dimorphism and determine the accuracy of sex determination using these parameters. The study employed descriptive statistics, such as means and standard deviations, and an independent t-test to determine the significance of the characteristics in relation to males and females. Results The mean bigonial width for females was 193.3068 mm (SD = 13.51669 mm) and for males was 217.6308 mm (SD = 10.87453 mm), with a statistically significant difference (p = 0.000). The 95% confidence interval for the difference in the bigonial width between males and females was between -49.97173 mm and -43.93787 mm. For the ramus flexure, the mean was 0.0000 for both males and females (SD = 0.00000), with a significant difference between males and females (p = 0.003). The 95% confidence interval for the difference in the ramus flexure between males and females was between -0.59543 and -0.12457. Conclusion The results indicated significant sexual dimorphism in both the ramus flexure and bigonial width. This study demonstrated that the ramus flexure and bigonial width, measured using orthopantomography (OPG), exhibited significant sexual dimorphism. The analysis of these mandibular parameters provided valuable information for sex determination in forensic and anthropological contexts.


  • Open Access

    Role of Mandibular Parameters in Gender Determination: A Systematic Review and Meta-Analysis

    by Abirami Arthanari, Shanmathy Sureshbabu, Karthikeyan Ramalingam, Monal Yuwanati, Lavanya Prathap, Vignesh Ravindran

    Forensic anthropology and forensic medicine both have been fascinating fields that deal with mandibular characteristics and sex determination. Researchers may determine an individual's biological sex with amazing precision by examining the size, shape, and proportions of the mandible. This information is useful for anthropological studies and criminal investigations. This systematic review aims to evaluate the consistency and validity of using mandibles as a method for gender determination across different populations. A systematic search was conducted in PubMed, Web of Science, and Scopus databases. Further, a manual search was carried out to find additional studies. Mandibular parameters and other relevant data about research were extracted from the included studies. Random effects meta-analysis was carried out for four parameters. A total of nine studies were included in the systematic review out of 76 initial search results. All studies were in vitro. Nine studies were included in the qualitative analysis, whereas only seven studies were included in the meta-analysis. A total of 2385 individuals (1193 male and 1192 female) were evaluated in the included studies. The parameters assessed were as follows: minimum ramus breadth (MiRB), maximum ramus breadth (MaRB), projective ramus height (PRH), bigonial width (BGW), gonial angle (GA), and antegonial angle (AGA). Meta-analysis was conducted for four parameters out of six. For the two parameters, meta-analysis was not conducted as only one study was evaluated. Meta-analyses of PRH obtained a high degree of heterogeneity (99%), mean difference (MD) of 4.06 mm, and p-value of p=0.09. Meta-analysis of BGW obtained 93% heterogeneity, MD of 9.03 mm, and p=0.0007. Meta-analysis of GA showed 99% heterogeneity, MD of 3.44 mm, and p=0.66. Meta-analysis of AGA obtained a low heterogeneity of 30%, MD of -0.77 mm, and p=0.23. The parameter, BGW, can be considered a useful tool in identifying sex. The parameters, PRH, GA, and AGA, cannot be preferred as a reliable tool in identifying the sex of an individual in forensic contexts.


  • Open Access

    Analyzing Mandibular Characteristics for Age and Gender Variation Through Digital Radiographic Techniques: A Retrospective Study

    by Abirami Arthanari, Shanmathy Sureshbabu, Karthikeyan Ramalingam, Vignesh Ravindran, Lavanya Prathap, Prashanthi Sitaraman, Prashanthi S

    Background Forensic odontology has emerged as a crucial method for identifying skeletal or dental remains. Due to the restricted accuracy of current techniques for estimating age at death, researchers have endeavored to illustrate age-related alterations in dental hard tissues. Bone remodeling constitutes an ongoing and intricate process throughout our lifespan. It is believed that morphological changes in the mandible during an individual's lifetime are influenced by both dental condition and the individual's age. Objectives This study aims to evaluate the efficacy of mandibular parameters such as projective ramus height (PRH), maximum ramus breadth (MaRB), bigonial width (BGW), antegonial depth (Ant.D), and antegonial angle (Ant.A), as a gender-determining tool and compare and analyze the mandibular parameter measurements using digital orthopantomography. Methodology In this study, the total number of samples used was 500 out of which 250 were males and 250 were females. Planmeca software (Version 6.0, Planmeca Romexis, Charlotte, NC) was used and the accuracy test, analysis of variance (ANOVA), multiple regression, and discriminant analysis for gender were performed using SPSS for Windows, Version 16.0 (SPSS Inc., Chicago, IL). Results For age estimation, the least standard error of 0.008 was observed for BGW. A maximum standard error of 0.230 was observed for Ant.D. For sex determination, the coefficient function was positive for PRH, BGW, and Ant.A, with values of 0.202, 0.805, and 0.052, respectively. Ant.D and MaRB both exhibited negative values of -0.204 and -0.379, respectively. Conclusions Out of all the parameters assessed, BGW is the most preferred parameter for age estimation and Ant.A can be preferred for sex estimation. Age and gender can be estimated using the two parameters in the Indian population.