WYWanxia Yang

Wanxia Yang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wanxia Yang has a total of 4 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Shear Strength and Re-Failure Characteristics of Intact Red Sandstone and Grouting-Reinforced Body of Fractured Red Sandstone under Different Shear Angles

    by Yaoguang Huang, Wanxia Yang, Aining Zhao, Weibin Guo

    To reveal the strengthening mechanism and re-failure mechanism of grouting on fractured rock, the variable-angle shear tests, real-time acoustic emission (AE) tests and VIC-3D (non-contact full field strain measurement system) tests were carried out on intact red sandstone (IRS) and grouting-reinforced body of fractured red sandstone (GRBFRS). The results show that the peak shear strength of IRS and GRBFRS decreases with the increase of shear angle. Grouting reinforcement mainly increases the cohesion of GRBFRS to improve its shear strength, but its reconstructability decreases with the increase of shear angle. In the whole process of shear deformation, the shear micro damage and shear fracture of GRBFRS are more than those of IRS. Although the shear re-failure before and after the peak stress stage is the most notable, its intensity or degree is reduced. When the shear angle is 45°, both IRS and GRBFRS undergo shear-splitting failure. However, when the shear angle is large, the IRS and GRBFRS only occurs shear failure. Moreover, the larger the shear angle, the more likely IRS and GRBFRS is to produce secondary shear cracks. The low strength of the rock–grout interface in GRBFRS is the main inducer of shear re-failure.


  • Open Access

    Spatial Distribution Characteristics of Plastic Failure and Grouting Diffusion within Deep Roadway Surrounding Rock under Three-Dimensional Unequal Ground Stress and Its Application

    by Yaoguang Huang, Wanxia Yang, Yangyang Li, Weibin Guo

    To explore the bolt-grouting method of the deep roadway under three-dimensional unequal ground stress, a unidirectional coupling model of surrounding rock plastic failure and grouting diffusion considering the influence of excavation disturbance stress was established. Spatial evolution characteristics of plastic failure and grouting diffusion, and the impact of the spacing and row spacing of grouting bolts/cables on grout diffusion, were simulated by using the numerical method. The results revealed that the horizontal ground stress perpendicular to the axial direction of the roadway was the main factor inducing roadway damage. Moreover, the more significant the difference of the ground stress in three directions, the larger the plastic zone of the roof corner and floor corner of the roadway. Under different lateral pressure coefficients, the grout diffused can be approximate ellipsoid and cylinders. Furthermore, the larger the ratio of lateral pressure coefficients perpendicular to and parallel to the axial direction of roadway, the larger the diffusion length of grout in each spatial direction in the surrounding rock. In bolt-grouting support, the length of the grouting bolts/cables should be greater than the plastic zone of the surrounding rock, and the optimal relationship between their spacing and row spacing and diffusion length of grout is determined. The research results were applied in the bolt-grouting engineering for the three-level main roadway in the Haizi Coal Mine, and a good support effect was achieved. This can provide technical guidance and a method of reference for the design and parameter optimization of bolt-grouting support for roadways under deep high ground stress.