Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Feng Guo has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Enhanced Mechanical and Anti-Wear Properties of Magnesium by Alloying and Subsequent Extrusion–Aging Treatment

    by Youjie Lv, Shaoqing Li, Feng Guo, Zhiwen Xie

    In this work, the microstructure, mechanical, and anti-wear properties of the alloyed-extruded-aged Mg-8.3Gd-4.5Y-1.4Zn-0.3Zr (wt%) alloys were investigated by X-ray diffraction (XRD), scanning electron microscope (SEM), nanoindentation, and wear tests. Results showed that the alloying—extrusion processing induced a significant grain refinement of magnesium resulting in the formation of bulk Mg24(GdYZn)5 at the grain boundaries. The grain size decreased from 116 μm in pure magnesium to 17 μm in alloyed-extruded magnesium, while the grain refinement, solid solution and second phase strengthening led to a hardness enhancement from 0.67 GPa in pure magnesium to 1.64 GPa in alloyed-extruded magnesium. Aging treatment further drove the structural homogenization of the alloyed-extruded magnesium resulting in an enhanced hardness of 1.83 GPa. During the sliding wear tests, a large-area plastic deformation layer formed on the wear track surface of pure magnesium, leading to an unstable friction coefficient and a high wear rate of 2.64 × 10−3 mm3·N−1·m−1. The alloying—extrusion—aging treatments effectively inhibited the formation of the plastic deformation layer. The wear rate of the alloyed-extruded material decreased to 1.60 × 10−3 mm3·N−1·m−1. In contrast, the alloyed-extruded-aged material showed a lower wear rate of 1.16 × 10−3 mm3·N−1·m−1. The wear failure mechanisms of all fabricated materials were further discussed according to the characterization results.


  • Open Access

    Effect of the Anodizing Temperature on Microstructure and Tribological Properties of 6061 Aluminum Alloy Anodic Oxide Films

    by Feng Guo, Yongzhi Cao, Kaijie Wang, Peng Zhang, Yaowen Cui, Zhenjiang Hu, Zhiwen Xie

    Anodizing a simple and effective method to improve the wear resistance of 6061 aluminum alloy. In this study, the microstructure of 6061 aluminum alloy oxide films (AAO) was adjusted by changing the electrolyte temperature (5, 15, and 25 °C) using 160 g/L sulfuric acid as the electrolyte. The phase composition, microstructure, and morphological characteristics of the specimens were detected using X-ray diffractometer and field emission scanning electron microscopy (SEM). The hardness, elastic modulus, and tribological properties of the films were examined using hardness testers and a rotary friction tester. The results showed that as the temperature of the electrolyte increases, the surface of the oxide films changes from uniformly distributed small-sized pores to a coral-like loose porous structure, and the thickness of the films increases. The electrolyte temperature has a significant effect on the friction performance of the AAO films. When the solution temperature decreases from 25 to 5 °C, the steady-state friction coefficient decreases from 0.46 to 0.39. According to the morphology of the wear tracks, it can be determined that the main wear mechanism of AAO films gradually changes from delamination wear to abrasive and adhesive wear, and the wear rate drops by ~69%.