CAChristian Albers

Christian Albers

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Christian Albers has a total of 79 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Towards in-line real-time characterization of roll-to-roll produced ZTO/Ag/ITO thin films by hyperspectral imaging

    by Susanne Dogan-Surmeier, Florian Gruber, Steffen Bieder, Patrick Schlenz, Michael Paulus, Christian Albers, Eric Schneider, Nicola Thiering, Christian Maurer, Metin Tolan, et al.

    Large area manufacturing processes of thin films such as large-area vacuum roll-to-roll coating of dielectric and gas permeation barrier layers in industry require a precise control of e.g. film thickness, homogeneity, chemical compositions, crystallinity and surface roughness. In order to determine these properties in real time, hyperspectral imaging is a novel, cost-efficient, and fast tool as in-line technology for large-area quality control. We demonstrate the application of hyperspectral imaging to characterize the thickness of thin films of the multilayer system ZTO/Ag/ITO produced by roll-to-roll magnetron sputtering on 220 mm wide polyethylene terephthalate substrate. X-ray reflectivity measurements are used to determine the thickness gradients of roll-to-roll produced foils with sub nanometer accuracy that serve as ground truth data to train a machine learning model for the interpretation of the hyperspectral imaging spectra. Based on the model, the sub-layer thicknesses on the complete substrate foil area were predicted which demonstrates the capabilities of this approach for large-scale in-line real-time quality control for industrial applications.


  • Open Access

    A von Hámos spectrometer for diamond anvil cell experiments at the High Energy Density Instrument of the European X-ray Free-Electron Laser

    by Johannes M. Kaa, Zuzana Konôpková, Thomas R. Preston, Valerio Cerantola, Christoph J. Sahle, Mirko Förster, Christian Albers, Lélia Libon, Robin Sakrowski, Lennart Wollenweber, et al.

    A von Hámos spectrometer has been implemented in the vacuum interaction chamber 1 of the High Energy Density instrument at the European X-ray Free-Electron Laser facility. This setup is dedicated, but not necessarily limited, to X-ray spectroscopy measurements of samples exposed to static compression using a diamond anvil cell. Si and Ge analyser crystals with different orientations are available for this setup, covering the hard X-ray energy regime with a sub-eV energy resolution. The setup was commissioned by measuring various emission spectra of free-standing metal foils and oxide samples in the energy range between 6 and 11 keV as well as low momentum-transfer inelastic X-ray scattering from a diamond sample. Its capabilities to study samples at extreme pressures and temperatures have been demonstrated by measuring the electronic spin-state changes of (Fe0.5Mg0.5)O, contained in a diamond anvil cell and pressurized to 100 GPa, via monitoring the Fe Kβ fluorescence with a set of four Si(531) analyser crystals at close to melting temperatures. The efficiency and signal-to-noise ratio of the spectrometer enables valence-to-core emission signals to be studied and single pulse X-ray emission from samples in a diamond anvil cell to be measured, opening new perspectives for spectroscopy in extreme conditions research.


  • Open Access

    High-efficiency X-ray emission spectroscopy of cold-compressed Fe 2 O 3 and laser-heated pressurized FeCO 3 using a von Hámos spectrometer

    by Christian Albers, Robin Sakrowski, Nicola Thiering, Lélia Libon, Georg Spiekermann, Johannes M. Kaa, Hlynur Gretarsson, Martin Sundermann, Metin Tolan, Max Wilke, et al.

    Fast and efficient (resonant) X-ray emission spectroscopy setup for the electronic structure at lower mantle conditions: high spin in laser-heated FeCO 3 and a two-step spin transition in pressurized Fe 2 O 3 with increasing valence to core intensity.


  • Open Access

    Non-resonant and resonant X-ray emission at high pressure using a von Hámos setup: the case of FeO

    by Christian Albers, Nicola Thiering, Robin Sakrowski, Hlynur Gretarsson, Johannes Kaa, Martin Sundermann, Metin Tolan, Max Wilke, Christian Sternemann

    We present a setup exploiting a von Hámos spectrometer in order to study (resonant) X-ray emission of matter exposed to high pressure. The capabilities of this setup are demonstrated for the case of FeO at pressures between 13 GPa and 75 GPa. The setup provides high-quality Kβ 1,3 X-ray emission spectra at high pressures for iron spin state analysis within minutes and iron valence-to-core spectra in less than one hour. Resonant X-ray emission maps can be obtained on a timescale of one hour with 1.0 eV and in approximately 3 hours with 0.2 eV incident energy resolution. Both Kα and Kβ emission can be utilized to gain L-edge and M-edge-like information, respectively, with the option of measuring both simultaneously. The spin state results on FeO between 13 GPa and 75 GPa are in accordance with recent literature. The structural distortion is reflected in both, valence-to-core spectra and resonant X-ray emission maps, which showcase the great potential of the presented setup. The achieved data acquisition times are promising to couple pressure with temperature by laser heating.


  • Open Access

    Structural and electron spin state changes in an x-ray heated iron carbonate system at the Earth's lower mantle pressures

    by Johannes M. Kaa, Christian Sternemann, Karen Appel, Valerio Cerantola, Thomas R. Preston, Christian Albers, Mirko Elbers, Lélia Libon, Mikako Makita, Alexander Pelka, et al.

    The determination of the spin state of iron-bearing compounds at high pressure and temperature is crucial for our understanding of chemical and physical properties of the deep Earth. Studies on the relationship between the coordination of iron and its electronic spin structure in iron-bearing oxides, silicates, carbonates, iron alloys, and other minerals found in the Earth's mantle and core are scarce because of the technical challenges to simultaneously probe the sample at high pressures and temperatures. We used the unique properties of a pulsed and highly brilliant x-ray free electron laser (XFEL) beam at the High Energy Density (HED) instrument of the European XFEL to x-ray heat and probe samples contained in a diamond anvil cell. We heated and probed with the same x-ray pulse train and simultaneously measured x-ray emission and x-ray diffraction of an FeCO3 sample at a pressure of 51 GPa with up to melting temperatures. We collected spin state sensitive Fe Kβ1,3 fluorescence spectra and detected the sample's structural changes via diffraction, observing the inverse volume collapse across the spin transition. During x-ray heating, the carbonate transforms into orthorhombic Fe4C3O12 and iron oxides. Incipient melting was also observed. This approach to collect information about the electronic state and structural changes from samples contained in a diamond anvil cell at melting temperatures and above will considerably improve our understanding of the structure and dynamics of planetary and exoplanetary interiors.


  • Open Access

    Setup to study the electronic structure of iron-bearing compounds in situ at conditions of the Earth’s lower mantle 

    by Christian Albers, Robin Sakrowski, Georg Spiekermann, Lélia Libon, Max Wilke, Nicola Thiering, Hlynur Gretarsson, Martin Sundermann, Johannes Kaa, Metin Tolan, et al.

    The determination of the electronic structure of iron-bearing compounds at high pressure and high temperature (HPHT) conditions is of crucial importance for the understanding of the Earth’s interior and planetary matter. Information on their electronic structure can be obtained by X-ray emission spectroscopy (XES) measurements, where the iron’s Kβ1,3 emission provides information about the spin state and the valence-to-core region focusses on the coordination chemistry around the iron and its electronic state. Furthermore, resonant XES (RXES) at the iron’s K-edge reveals even more detailed information about the electronic structure [1].We present a setup to investigate the electronic structure of iron-bearing compounds in situ at HPHT conditions using XES and RXES. The HPHT conditions are accomplished by diamond anvil cells (DACs) in combination with a portable double-sided Yb:YAG-laser heating setup [2]. The spectroscopy setup contains a wavelength dispersive von Hamos spectrometer in combination with a Pilatus 100K area detector [3]. This setup provides a full Kβ1,3 emission spectrum including valence-to-core emission in a single shot fashion. In combination with a dedicated sample preparation and use of highly intense synchrotron radiation of beamline P01 at PETRA III, the duration of the measurements is shortened to an extend that in situ XES, including valence-to-core, as well as in situ spin state imaging becomes feasible. The use of miniature diamonds [4] enables RXES measurements at the Fe-K edge. By using different analyzer crystals for the von Hamos spectrometer, simultaneous Kα and Kβ detection are feasible, which provides L-edge and M-edge like information.The presented sample is siderite (FeCO3), which is in focus of recent research as it is a candidate for the carbon storage in the deep Earth. Siderite exhibits a complex chemistry at pressures above 50 GPa and temperatures above 1400 K resulting in the formation of carbonates featuring tetrahedrally coordinated CO4-groups instead of the typical triangular-planar CO3-coordination. These carbonates are well understood on a structural level but information on their electronic structure is scarce [5-7]. We present information on the sample’s spin state at in situ conditions of about 75 GPa and 2000 K XES Kβ1,3 imaging  as well as RXES measurements for low and high pressure siderite at ambient temperature conditions for Kα and Kβ emission.[1] M. L. Baker et al., Coordination Chemistry Reviews 345, 182 (2017)[2] G. Spiekermann et al.,  Journal of Synchroton Radiation, 27, 414 (2020)[3] C. Weis et al., Journal of Analytical Atomic Spectroscopy 34, 384 (2019)[4] S. Petitgirard et al., J. Synchrotron Rad. , 24, 276 (2017)[5] J. Liu et al., Scientific Reports, 5, 7640 (2015)[6] M. Merlini et al., American Mineralogist, 100, 2001, (2015)[7] V. Cerantola et al., Nature Communications 8, 15960 (2017)

  • Open Access

    Subducted Carbon in the Earth’s lower mantle: The fate of magnesite

    by Lélia Libon, Georg Spiekermann, Melanie Sieber, Johannes Kaa, Serena Dominijanni, Mirko Elbers, Ingrid Blanchard, Christian Albers, Nicole Bierdermann, Wolfgang Morgenroth, et al.

    Subduction of carbon-bearing phases throughout Earth’s history may be an important mechanism of sourcing carbon to the Earth’s lower mantle. As carbon has very low solubility in mantle silicates, it is primarily present in accessory phases such as carbonates, diamond, or metal carbides. Previous studies indicate that more than half of the carbonate contained in the oceanic crust may survive metamorphism and dehydration in the sub-arc and reach the lower mantle, even though the oxygen fugacity in the deep mantle may not favour their stability [1]. Indeed, the presence of carbonate in ultra-deep diamond inclusions provides evidence for carbonate subduction at least down to the transition zone [2].The carbonate phases present in the lower mantle depend on their bulk composition, the oxygen fugacity, and on their stability at a given pressure and temperature. Results from high-pressure experiments show that magnesite (MgCO3) can be stable up to deep lower mantle conditions (∼80 GPa and 2500 K) [3]. Accordingly, magnesite may be considered the most probable carbonate phase present in the deep Earth. Experimental studies on magnesite decarbonation in presence of SiO2 at lower mantle conditions suggest that magnesite is stable along a cold subducted slab geotherm [4, 5]. However, our understanding of magnesite’s stability in contact with bridgmanite [(Mg,Fe)SiO3],  the most abundant mineral in the lower mantle, remains incomplete.Hence, to investigate sub-solidus reactions, melting, decarbonation, and diamond formation in the system MgCO3-(Mg,Fe)SiO3, we conducted a combination of high-pressure experiments using multi-anvil press and laser-heated diamond anvil cells (LH-DAC) at conditions ranging from 25 to 70 GPa and 1300 to 2100 K.Multi-anvil experiments at 25 GPa and temperatures below the mantle geotherm (1700 K) show the formation of carbonate-silicate melt associated with stishovite crystallization, indicating incongruent melting of bridgmanite to stishovite, in accordance with the recent finding of Litasov and Shatskiy [4]. LH-DAC data from in situ X-ray diffraction show crystallization of bridgmanite and stishovite. Diamond crystallization is detected using Raman spectroscopy. A melt phase could not be detected in situ at high temperatures.Our results suggest a two-step process that starts with melting at temperatures below the mantle geotherm, followed by crystallization of diamond from the melt produced.  Therefore, we propose that subducted carbonate-bearing silicate rocks will not remain stable in the lower mantle and will instead melt at upper-most lower mantle conditions, fostering diamond formation. Our study also provides additional evidence that diamond production is related to carbonated melt. Consequently, the melting of recycled crust and chemical transfer to the surrounding mantle will hinder the transport of carbon deeper into the lower mantle.[1] Stagno et al. (2015) Contrib. Mineral. Petrol. 169(2), 16.[2] Brenker et al. (2007) EPSL 260(1-2), 1-9.[3] Binck, et al. (2020) Physical Review Materials, 4(5),1-9.[4] Litasov & Shatskiy (2019) Geochemistry International, 57(9), 1024-1033.[5] Drewitt, et al. (2019). EPSL, 511, 213-222.

  • Fe3+ -hosting carbon phases in the deep Earth

    by Christian Albers, Robin Sakrowski, Lélia Libon, Georg Spiekermann, Björn Winkler, Christian Schmidt, Lkhamsuren Bayarjargal, Valerio Cerantola, Stella Chariton, Nico Giordano, et al.

    Iron-bearing carbonates play an important role in Earth's carbon cycle. Owing to their stability at mantle conditions, recently discovered iron carbonates with tetrahedrally coordinated carbon atoms are candidates for carbon storage in the deep Earth. The carbonates' iron oxidation and spin state at extreme pressure and temperature conditions contribute to the redox conditions and element partitioning in the deep mantle. By laser heating FeCO3 at pressures of about 83 GPa, Fe43+C3O12 and Fe22+Fe23+C4O13 were synthesized and then investigated by x-ray emission spectroscopy to elucidate their spin state, both in situ and temperature quenched. Our experimental results show both phases in a high-spin state at all pressures and over the entire temperature range investigated, i.e., up to 3000 K. The spin state is conserved after temperature quenching. A formation path is favored where Fe43+C3O12 forms first and then reacts to Fe22+Fe23+C4O13, most likely accompanied by the formation of oxides. Density functional theory calculations of Fe22+Fe23+C4O13 at 80 GPa confirm the experimental findings with both ferric and ferrous iron in high-spin state with antiferromagnetic order at 80 GPa. As the intercrystalline cation partitioning between the Fe-bearing carbonates and the surrounding perovskite and ferropericlase depends on the spin state of the iron, an understanding of the redox conditions prevalent in subducted slab regions in the lower mantle has to take the latter into account. Especially, Fe22+Fe23+C4O13 may play a key role in subducted material in the lower mantle, potentially with a similar role as silicate perovskite.


  • Open Access

    Ion association in hydrothermal aqueous NaCl solutions: implications for the microscopic structure of supercritical water

    by Mirko Elbers, Christian Schmidt, Christian Sternemann, Christoph J. Sahle, Sandro Jahn, Christian Albers, Robin Sakrowski, Hlynur Gretarsson, Martin Sundermann, Metin Tolan, et al.

    Knowledge of the microscopic structure of fluids and changes thereof with pressure and temperature is important for the understanding of chemistry and geochemical processes. In this work we investigate the influence of sodium chloride on the hydrogen-bond network in aqueous solution up to supercritical conditions. A combination of in situ X-ray Raman scattering and ab initio molecular dynamics simulations is used to probe the oxygen K-edge of the alkali halide aqueous solution in order to obtain unique information about the oxygen's local coordination around the ions, e.g. solvation-shell structure and the influence of ion pairing. The measured spectra exhibit systematic temperature dependent changes, which are entirely reproduced by calculations on the basis of structural snapshots obtained via ab initio molecular dynamics simulations. Analysis of the simulated trajectories allowed us to extract detailed structural information. This combined analysis reveals a net destabilizing effect of the dissolved ions which is reduced with rising temperature. The observed increased formation of contact ion pairs and occurrence of larger polyatomic clusters at higher temperatures can be identified as a driving force behind the increasing structural similarity between the salt solution and pure water at elevated temperatures and pressures with drawback on the role of hydrogen bonding in the hot fluid. We discuss our findings in view of recent results on hot NaOH and HCl aqueous fluids and emphasize the importance of ion pairing in the interpretation of the microscopic structure of water.


  • Open Access

    A portable on-axis laser-heating system for near-90° X-ray spectroscopy: application to ferropericlase and iron silicide

    by Georg Spiekermann, Ilya Kupenko, Sylvain Petitgirard, Manuel Harder, Alexander Nyrow, Christopher Weis, Christian Albers, Nicole Biedermann, Lélia Libon, Christoph J. Sahle, et al.

    A portable IR fiber laser-heating system, optimized for X-ray emission spectroscopy (XES) and nuclear inelastic scattering (NIS) spectroscopy with signal collection through the radial opening of diamond anvil cells near 90°with respect to the incident X-ray beam, is presented. The system offers double-sided on-axis heating by a single laser source and zero attenuation of incoming X-rays other than by the high-pressure environment. A description of the system, which has been tested for pressures above 100 GPa and temperatures up to 3000 K, is given. The XES spectra of laser-heated Mg0.67Fe0.33O demonstrate the potential to map the iron spin state in the pressure–temperature range of the Earth's lower mantle, and the NIS spectra of laser-heated FeSi give access to the sound velocity of this candidate of a phase inside the Earth's core. This portable system represents one of the few bridges across the gap between laser heating and high-resolution X-ray spectroscopies with signal collection near 90°.