Digne Edmond Rwabuhungu Rwatangabo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Digne Edmond Rwabuhungu Rwatangabo has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
Alister Smith
1 shared publication- Cyprien Niyigena1 shared publication
- Jei-Pil Wang
BB21 Plus Team, Department of Metallurgical Engineering, Pukyong National University, Busan 48513, Republic of Korea
1 shared publication - Jules Uwizeyimana
School of Mining and Geology, College of Science and Technology, University of Rwanda, Avenue de l’armée, Kigali P.O. Box 3900, Rwanda
1 shared publication - Juliette Confiance Kabatesi
School of Mining and Geology, College of Science and Technology, University of Rwanda, Avenue de l’armée, Kigali P.O. Box 3900, Rwanda
1 shared publication Tom Dijkstra
1 shared publication
Latest Publications
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
A spatio-temporal framework for modelling shallow landslides along mountainous transport corridors
Rainfall-induced shallow landslides affect transport infrastructure by reducing serviceability and increasing road maintenance costs. These impacts are likely to become more severe with climate change. The aim of this research was to develop a framework to assess the spatio-temporal stability of slopes along transport corridors for decision support. The developed approach couples daily soil water balance with a widely used physically-based model: Transient Rainfall Infiltration and Grid-Based Regional Slope-Stability (TRIGRS). Performance of the framework was evaluated along the Mukamira – Kabaya national road that crosses a rugged topography in Nyabihu, Northwestern Rwanda. Spatio-temporal analyses conducted on landslide inventory in the road corridor indicated that the road has been susceptible to shallow landslides originating both from roadcuts and elsewhere in the road corridor. The observed temporal increase in landslides density in the corridor underscores an escalating threat to the road. Consequently, incorporating temporal variability of landslide predictors into future projection can assist to better understand prospective landslide activity in the road corridor, and the subsequent impact on the road. Applying a water balance model as input into TRIGRS provides a more realistic temporal assessment of initial soil moisture conditions and, in turn, a more relevant evaluation of triggering rainfall magnitudes. Using historic weather data, the framework showed capabilities of tracking variations of stability conditions of the roadside and forecasting the road sections that could potentially become blocked by road cut shallow instabilities. The framework highlights road sections exposed to distinct hazards, e.g. debris slides or debris flows paths. For landslide risk assessment, using historical data it was possible to link observed landslide occurrences to soil moisture and triggering rainfall conditions. It was also possible to estimate probable mobilised volumes of debris to be deposited on the road. In addition, the framework enabled evaluation of deteriorated shear strength of road cut materials on future projections of stability. For existing roads, the framework provides an important contribution to enable road asset managers to develop effective and economic maintenance plans. For the development of new roads, this framework can assist with the optimisation of alignment and cutslope morphology.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessA spatio-temporal framework for modelling shallow landslides along mountainous transport corridors
Rainfall-induced shallow landslides affect transport infrastructure by reducing serviceability and increasing road maintenance costs. These impacts are likely to become more severe with climate change. The aim of this research was to develop a framework to assess the spatio-temporal stability of slopes along transport corridors for decision support. The developed approach couples daily soil water balance with a widely used physically-based model: Transient Rainfall Infiltration and Grid-Based Regional Slope-Stability (TRIGRS). Performance of the framework was evaluated along the Mukamira – Kabaya national road that crosses a rugged topography in Nyabihu, Northwestern Rwanda. Spatio-temporal analyses conducted on landslide inventory in the road corridor indicated that the road has been susceptible to shallow landslides originating both from roadcuts and elsewhere in the road corridor. The observed temporal increase in landslides density in the corridor underscores an escalating threat to the road. Consequently, incorporating temporal variability of landslide predictors into future projection can assist to better understand prospective landslide activity in the road corridor, and the subsequent impact on the road. Applying a water balance model as input into TRIGRS provides a more realistic temporal assessment of initial soil moisture conditions and, in turn, a more relevant evaluation of triggering rainfall magnitudes. Using historic weather data, the framework showed capabilities of tracking variations of stability conditions of the roadside and forecasting the road sections that could potentially become blocked by road cut shallow instabilities. The framework highlights road sections exposed to distinct hazards, e.g. debris slides or debris flows paths. For landslide risk assessment, using historical data it was possible to link observed landslide occurrences to soil moisture and triggering rainfall conditions. It was also possible to estimate probable mobilised volumes of debris to be deposited on the road. In addition, the framework enabled evaluation of deteriorated shear strength of road cut materials on future projections of stability. For existing roads, the framework provides an important contribution to enable road asset managers to develop effective and economic maintenance plans. For the development of new roads, this framework can assist with the optimisation of alignment and cutslope morphology.
- Open Access
Evaluation of Efficiency of Using Mechanized Processing Techniques to Recover Tin and Tantalum in Gatsibo, Eastern Province, Rwanda
Rwanda is known to be among the top producers of tin and tantalum, despite having low recovery and grades. This study was carried out to evaluate the efficiency of using mechanized methods to increase the recovery rate and grades of tin and tantalum mined in Gatsibo, Eastern Province, Rwanda, since the general separation techniques used are artisanal. The minerals in those mines include cassiterite (SnO2) and colombite–tantalite ((Fe,Mn)(Ta,Nb)2O5), with impurities such as Al2O3, Fe2O3, MnO, MgO, Cao, Na2O, K2O, TiO2, and P2O5. A combination of gravity separation techniques, including shaking tables and magnetic separation, were used as the mechanized processing techniques. The results were compared to the results obtained by artisanal processing techniques. The proposed mechanized techniques were found to increase the efficiency of tin and tantalum recovery from 60.75% to 81.85% and from 22.9% to 48.57%, respectively, and the grades of the tin and tantalum increased to 63.75% and 35.7%, respectively. Based on these results, the proposed mechanized processing techniques and the recycling of waste from artisanal processing techniques are highly recommended.
Open AccessEvaluation of Efficiency of Using Mechanized Processing Techniques to Recover Tin and Tantalum in Gatsibo, Eastern Province, Rwanda
Rwanda is known to be among the top producers of tin and tantalum, despite having low recovery and grades. This study was carried out to evaluate the efficiency of using mechanized methods to increase the recovery rate and grades of tin and tantalum mined in Gatsibo, Eastern Province, Rwanda, since the general separation techniques used are artisanal. The minerals in those mines include cassiterite (SnO2) and colombite–tantalite ((Fe,Mn)(Ta,Nb)2O5), with impurities such as Al2O3, Fe2O3, MnO, MgO, Cao, Na2O, K2O, TiO2, and P2O5. A combination of gravity separation techniques, including shaking tables and magnetic separation, were used as the mechanized processing techniques. The results were compared to the results obtained by artisanal processing techniques. The proposed mechanized techniques were found to increase the efficiency of tin and tantalum recovery from 60.75% to 81.85% and from 22.9% to 48.57%, respectively, and the grades of the tin and tantalum increased to 63.75% and 35.7%, respectively. Based on these results, the proposed mechanized processing techniques and the recycling of waste from artisanal processing techniques are highly recommended.