Stefano Carpita
Stefano Carpita has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Gaetano Licitra
Pisa Department, Environmental Protection Agency of Tuscany Region (ARPAT), Via Vittorio Veneto 27, 56127 Pisa, Italy
3 shared publications - Luca Fredianelli
Institute for Chemical-Physical Processes, Italian Research Council (CNR-IPCF), Via Moruzzi 1, 56100 Pisa, Italy
3 shared publications - Alessandro Monticelli
Physics Department, University of Pisa, Largo Bruno Pontecorvo 3, 56127 Pisa, Italy
1 shared publication - Fabio Brocchi
POOL S.r.l., via Cocchi 7, 56121 Pisa, Italy
1 shared publication - Francesco Bianco
POOL S.r.l., via Cocchi 7, 56121 Pisa, Italy
1 shared publication - Francesco Bianco
POOL S.r.l., Via Antonio Cocchi 7, 56121 Pisa, Italy
1 shared publication
Latest Publications
- Open Access
- 4 April 2023
- Published by MDPI AG in Environments
- Vol. 10 (4) , 61
Definition of Key Performance Indicators for Noise Monitoring Networks
The European Noise Directive fixed a well-defined schedule on a five-year basis for the noise exposure evaluation of citizens. Noise monitoring is needed to validate noise maps of the main transportation infrastructures and it can also represent an improvement. By comparing with average noise maps, a properly set sensor network can report noise information in a more case-specific way, including time variations. To the best of the authors’ knowledge, key performance indicators (KPIs) evaluating the technical performance and financial sustainability of acoustic networks have never been presented in the scientific literature. Therefore, in the present work, a set of KPIs are proposed on the basis of KPIs defined for monitoring networks of other pollutants. It is then tuned according to noise monitoring, in line with the current legislations. As a case study, the performance of three monitoring networks installed in ports are evaluated and discussed. The resulting investment and maintenance costs can be helpful for decision makers to calculate the cost–benefits in the installation of new monitoring stations and also to evaluate the performance of the already-existing ones.
- 4 April 2023
- Published by MDPI AG in Environments
- Vol. 10 (4) , 61
Open AccessDefinition of Key Performance Indicators for Noise Monitoring Networks
The European Noise Directive fixed a well-defined schedule on a five-year basis for the noise exposure evaluation of citizens. Noise monitoring is needed to validate noise maps of the main transportation infrastructures and it can also represent an improvement. By comparing with average noise maps, a properly set sensor network can report noise information in a more case-specific way, including time variations. To the best of the authors’ knowledge, key performance indicators (KPIs) evaluating the technical performance and financial sustainability of acoustic networks have never been presented in the scientific literature. Therefore, in the present work, a set of KPIs are proposed on the basis of KPIs defined for monitoring networks of other pollutants. It is then tuned according to noise monitoring, in line with the current legislations. As a case study, the performance of three monitoring networks installed in ports are evaluated and discussed. The resulting investment and maintenance costs can be helpful for decision makers to calculate the cost–benefits in the installation of new monitoring stations and also to evaluate the performance of the already-existing ones.
- Open Access
- 17 March 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (6) , 5340
Adjusted Controlled Pass-By (CPB) Method for Urban Road Traffic Noise Assessment
Noise associated with road infrastructure is a prominent problem in environmental acoustics, and its implications with respect to human health are well documented. Objective and repeatable methodologies are necessary for testing the efficacy of sustainable noise mitigation methods such as low noise emission pavement. The Controlled Pass-By (CPB) method is used to measure the sound generated by passing vehicles. Despite its popularity, the applicability of CPB is compromised in urban contexts, as its results depend on test site conditions, and slight changes in the experimental setup can compromise repeatability. Moreover, physical conditions, reduced space, and urban elements risk confine its use to only experimental road sites. In addition, vehicle speed represents a relevant factor that further contributes to the method’s inherent instability. The present paper aims to extend the applicable range of this method and to provide more reliable results by proposing an adjusted CPB method. Furthermore, CPB metrics such as do not consider the travelling speed of the vehicle under investigation. Our proposed method can yield an alternative metric that takes into account the duration of the noise event. A hypothetical urban case is investigated, and a signal processing pipeline is developed to properly characterize the resulting data. Speed cushions, manhole covers, and other spurious effects not related to the pass-by sound emissions of ordinary vehicles are pinpointed as well.- 17 March 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (6) , 5340
Open AccessAdjusted Controlled Pass-By (CPB) Method for Urban Road Traffic Noise Assessment
Noise associated with road infrastructure is a prominent problem in environmental acoustics, and its implications with respect to human health are well documented. Objective and repeatable methodologies are necessary for testing the efficacy of sustainable noise mitigation methods such as low noise emission pavement. The Controlled Pass-By (CPB) method is used to measure the sound generated by passing vehicles. Despite its popularity, the applicability of CPB is compromised in urban contexts, as its results depend on test site conditions, and slight changes in the experimental setup can compromise repeatability. Moreover, physical conditions, reduced space, and urban elements risk confine its use to only experimental road sites. In addition, vehicle speed represents a relevant factor that further contributes to the method’s inherent instability. The present paper aims to extend the applicable range of this method and to provide more reliable results by proposing an adjusted CPB method. Furthermore, CPB metrics such as do not consider the travelling speed of the vehicle under investigation. Our proposed method can yield an alternative metric that takes into account the duration of the noise event. A hypothetical urban case is investigated, and a signal processing pipeline is developed to properly characterize the resulting data. Speed cushions, manhole covers, and other spurious effects not related to the pass-by sound emissions of ordinary vehicles are pinpointed as well. - Top Cited PapersOpen Access
Traffic Flow Detection Using Camera Images and Machine Learning Methods in ITS for Noise Map and Action Plan Optimization
Noise maps and action plans represent the main tools in the fight against citizens’ exposure to noise, especially that produced by road traffic. The present and the future in smart traffic control is represented by Intelligent Transportation Systems (ITS), which however have not yet been sufficiently studied as possible noise-mitigation tools. However, ITS dedicated to traffic control rely on models and input data that are like those required for road traffic noise mapping. The present work developed an instrumentation based on low-cost cameras and a vehicle recognition and counting methodology using modern machine learning techniques, compliant with the requirements of the CNOSSOS-EU noise assessment model. The instrumentation and methodology could be integrated with existing ITS for traffic control in order to design an integrated method, which could also provide updated data over time for noise maps and action plans. The test was carried out as a follow up of the L.I.S.T. Port project, where an ITS was installed for road traffic management in the Italian port city of Piombino. The acoustic efficacy of the installation is evaluated by looking at the difference in the acoustic impact on the population before and after the ITS installation by means of the distribution of noise exposure, the evaluation of Gden and Gnight, and the calculation of the number of highly annoyed and sleep-disturbed citizens. Finally, it is shown how the ITS system represents a valid solution to be integrated with targeted and more specific sound mitigation, such as the laying of low-emission asphalts.
Top Cited PapersOpen AccessTraffic Flow Detection Using Camera Images and Machine Learning Methods in ITS for Noise Map and Action Plan Optimization
Noise maps and action plans represent the main tools in the fight against citizens’ exposure to noise, especially that produced by road traffic. The present and the future in smart traffic control is represented by Intelligent Transportation Systems (ITS), which however have not yet been sufficiently studied as possible noise-mitigation tools. However, ITS dedicated to traffic control rely on models and input data that are like those required for road traffic noise mapping. The present work developed an instrumentation based on low-cost cameras and a vehicle recognition and counting methodology using modern machine learning techniques, compliant with the requirements of the CNOSSOS-EU noise assessment model. The instrumentation and methodology could be integrated with existing ITS for traffic control in order to design an integrated method, which could also provide updated data over time for noise maps and action plans. The test was carried out as a follow up of the L.I.S.T. Port project, where an ITS was installed for road traffic management in the Italian port city of Piombino. The acoustic efficacy of the installation is evaluated by looking at the difference in the acoustic impact on the population before and after the ITS installation by means of the distribution of noise exposure, the evaluation of Gden and Gnight, and the calculation of the number of highly annoyed and sleep-disturbed citizens. Finally, it is shown how the ITS system represents a valid solution to be integrated with targeted and more specific sound mitigation, such as the laying of low-emission asphalts.