Jiacai Liao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Jiacai Liao has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Guoxiang Shu
State Key Laboratory of Radio Frequency Heterogeneous Integration and the College of Electronics and Information Engineering, Shenzhen University, Shenzhen, China
18 shared publications - Wenlong He
State Key Laboratory of Radio Frequency Heterogeneous Integration and the College of Electronics and Information Engineering, Shenzhen University, Shenzhen, China
17 shared publications - Cunjun Ruan
Beihang University
10 shared publications - Guangxin Lin
State Key Laboratory of Radio Frequency Heterogeneous Integration, College of Electronics and Information Engineering, Shenzhen University, Shenzhen, China
9 shared publications - Jujian Lin
State Key Laboratory of Radio Frequency Heterogeneous Integration, College of Electronics and Information Engineering, Shenzhen University, Shenzhen, China
7 shared publications - Huaxing Pan
State Key Laboratory of Radio Frequency Heterogeneous Integration, College of Electronics and Information Engineering, Shenzhen University, Shenzhen, China
6 shared publications
Latest Publications
- 2 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 16 (6) , 696-705
Design and Measurement of Terahertz Broadband Vertically Coupled High-Order TE □ n0 Mode Converters
The theoretical analysis, simulation, fabrication, and measurement of a novel TE□10–TE□n0 mode converter is described in this article. In the existing research work, although a significant portion of mode converters have the expansibility to higher order modes, the performance of the mode converters will deteriorate when the mode index increases. As we know, no mode converters operating higher than TE□70 mode have ever been reported. To address this issue, a novel vertically coupled mode converter for converting the TE□10 mode to higher order TE□n0 mode is proposed in this article. As examples, the TE□10–TE□80 and TE□10–TE□70 mode converters are designed. Simulated results show that the 1 dB transmission bandwidths of the TE□10–TE□80 and the TE□10–TE□70 mode converters are 56.1 GHz (228.7–284.8 GHz) and 50.0 GHz (232.3–282.3 GHz), respectively. Within the operating bandwidth, the reflection coefficients S11 of both mode converters are less than –15 dB and the conversion efficiencies S21 of the targeted TE□80 mode and TE□70 mode are higher than 99% and 92%, respectively. In addition, two back-to-back connected TE□10–TE□80 mode converters are fabricated and measured to verify the design. The measured S-parameters align well with the simulated results and exhibit a flat response, which confirms the feasibility of the proposed mode converter and shows that it can achieve good performance at much higher order modes.
- 2 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 16 (6) , 696-705
Design and Measurement of Terahertz Broadband Vertically Coupled High-Order TE □ n0 Mode Converters
The theoretical analysis, simulation, fabrication, and measurement of a novel TE□10–TE□n0 mode converter is described in this article. In the existing research work, although a significant portion of mode converters have the expansibility to higher order modes, the performance of the mode converters will deteriorate when the mode index increases. As we know, no mode converters operating higher than TE□70 mode have ever been reported. To address this issue, a novel vertically coupled mode converter for converting the TE□10 mode to higher order TE□n0 mode is proposed in this article. As examples, the TE□10–TE□80 and TE□10–TE□70 mode converters are designed. Simulated results show that the 1 dB transmission bandwidths of the TE□10–TE□80 and the TE□10–TE□70 mode converters are 56.1 GHz (228.7–284.8 GHz) and 50.0 GHz (232.3–282.3 GHz), respectively. Within the operating bandwidth, the reflection coefficients S11 of both mode converters are less than –15 dB and the conversion efficiencies S21 of the targeted TE□80 mode and TE□70 mode are higher than 99% and 92%, respectively. In addition, two back-to-back connected TE□10–TE□80 mode converters are fabricated and measured to verify the design. The measured S-parameters align well with the simulated results and exhibit a flat response, which confirms the feasibility of the proposed mode converter and shows that it can achieve good performance at much higher order modes.
- 14 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (10) , 1873-1876
Study of an Ultra-Wideband Sine-Shape Staggered Waveguide for a Terahertz Band Sheet Beam TWT
A novel slow wave structure (SWS) featuring an innovative sine-shape staggered waveguide (SSW) and dual-mode operation has been developed for ultra-wideband sheet beam travelling wave tubes. In contrast to the double-staggered grating SWS, the SSW SWS is equivalent to reducing the grating height, enabling the broadening of the operational bandwidth while maintaining interaction impedance characteristics. Numerical simulations demonstrate exceptional broadband characteristics with S11 below -15.3 dB and S21 exceeding -8.5 dB across 237-324 GHz (87 GHz), achieving 31.0% fractional bandwidth. Cold-test results are consistent with the simulation results having considered fabrication tolerances, electromagnetic leakage, and surface roughness effects. PIC simulations predict good performance, achieving 65.0 W output power over a 76 GHz bandwidth (236-312 GHz, 27.8% fractional bandwidth), with a peak output power of 253.0 W at 250 GHz.
- 14 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (10) , 1873-1876
Study of an Ultra-Wideband Sine-Shape Staggered Waveguide for a Terahertz Band Sheet Beam TWT
A novel slow wave structure (SWS) featuring an innovative sine-shape staggered waveguide (SSW) and dual-mode operation has been developed for ultra-wideband sheet beam travelling wave tubes. In contrast to the double-staggered grating SWS, the SSW SWS is equivalent to reducing the grating height, enabling the broadening of the operational bandwidth while maintaining interaction impedance characteristics. Numerical simulations demonstrate exceptional broadband characteristics with S11 below -15.3 dB and S21 exceeding -8.5 dB across 237-324 GHz (87 GHz), achieving 31.0% fractional bandwidth. Cold-test results are consistent with the simulation results having considered fabrication tolerances, electromagnetic leakage, and surface roughness effects. PIC simulations predict good performance, achieving 65.0 W output power over a 76 GHz bandwidth (236-312 GHz, 27.8% fractional bandwidth), with a peak output power of 253.0 W at 250 GHz.
- 13 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (10) , 5151-5158
Study of a 0.3 THz Double-Staggered Grating Waveguide-Based Band-Edge Oscillator
The design of a novel band-edge oscillator based on double-staggered grating waveguides (DSGWs) is presented in this article. For a traveling wave tube (TWT), the band-edge oscillation is typically expected to be eliminated since it will affect the stable operation of a TWT. However, in this design, such an oscillation is employed to generate a high-power terahertz signal within a small tunable bandwidth ( $\sim$ 2.0 GHz) by changing the beam voltage. To suppress the higher-order modes competition, a novel concentrated attenuator with the mode filtering property is proposed. To verify this design, a DSGW circuit made of 88 periods was manufactured and measured. Measured results showed that the transmission coefficient $S_{{21}}$ was higher than $-$ 8.0 dB; meanwhile, the reflection coefficient $S_{{11}}$ was lower than $-$ 10.0 dB over the bandwidth of 2.0 GHz (298.6–300.6 GHz). The DSGW circuits with two different kinds of dielectric attenuators were also processed and tested. The simulated and measured $S$ -parameters and dispersion curves were in agreement, demonstrating the feasibility of our design. PIC simulation results predicted an output power exceeding 101.2 W within the frequency range of 298.6–300.6 GHz (2.0 GHz).
- 13 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (10) , 5151-5158
Study of a 0.3 THz Double-Staggered Grating Waveguide-Based Band-Edge Oscillator
The design of a novel band-edge oscillator based on double-staggered grating waveguides (DSGWs) is presented in this article. For a traveling wave tube (TWT), the band-edge oscillation is typically expected to be eliminated since it will affect the stable operation of a TWT. However, in this design, such an oscillation is employed to generate a high-power terahertz signal within a small tunable bandwidth ( $\sim$ 2.0 GHz) by changing the beam voltage. To suppress the higher-order modes competition, a novel concentrated attenuator with the mode filtering property is proposed. To verify this design, a DSGW circuit made of 88 periods was manufactured and measured. Measured results showed that the transmission coefficient $S_{{21}}$ was higher than $-$ 8.0 dB; meanwhile, the reflection coefficient $S_{{11}}$ was lower than $-$ 10.0 dB over the bandwidth of 2.0 GHz (298.6–300.6 GHz). The DSGW circuits with two different kinds of dielectric attenuators were also processed and tested. The simulated and measured $S$ -parameters and dispersion curves were in agreement, demonstrating the feasibility of our design. PIC simulation results predicted an output power exceeding 101.2 W within the frequency range of 298.6–300.6 GHz (2.0 GHz).
- 27 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (12) , 2546-2549
Study of a Terahertz-Band Integrated Dual-Sheet Beam Weak Pole Offset Periodic Cusped Magnetic Focusing Structure
The long-distance and stable transmission of multiple sheet electron beams is one of the most critical challenges hindering the development of integrated multiple sheet electron beam devices. A uniform magnetic focusing structure is an effective scheme to focus multiple sheet electron beams, but it significantly increases the size and weight. To address this issue, this letter proposes a novel weak pole offset periodic cusped magnetic (WPO-PCM) focusing structure with a more compact geometry. In this structure, both the horizontal and vertical sides of each sheet electron beam are primarily confined by a large Bz , while a small By is used for fine-tuning. The theoretical analysis, simulation, fabrication, and measurement of this WPO-PCM focusing structure are presented. The measured magnetic fields coincide well with their simulated counterparts, indicating that the structure could provide a peak B z of 0.8 T. The effectiveness of the methodology for this WPO-PCM is further verified through the co-simulation of the dual-sheet beam electron optic system and the beam-wave interaction of the entire traveling wave tube.
- 27 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (12) , 2546-2549
Study of a Terahertz-Band Integrated Dual-Sheet Beam Weak Pole Offset Periodic Cusped Magnetic Focusing Structure
The long-distance and stable transmission of multiple sheet electron beams is one of the most critical challenges hindering the development of integrated multiple sheet electron beam devices. A uniform magnetic focusing structure is an effective scheme to focus multiple sheet electron beams, but it significantly increases the size and weight. To address this issue, this letter proposes a novel weak pole offset periodic cusped magnetic (WPO-PCM) focusing structure with a more compact geometry. In this structure, both the horizontal and vertical sides of each sheet electron beam are primarily confined by a large Bz , while a small By is used for fine-tuning. The theoretical analysis, simulation, fabrication, and measurement of this WPO-PCM focusing structure are presented. The measured magnetic fields coincide well with their simulated counterparts, indicating that the structure could provide a peak B z of 0.8 T. The effectiveness of the methodology for this WPO-PCM is further verified through the co-simulation of the dual-sheet beam electron optic system and the beam-wave interaction of the entire traveling wave tube.
- 4 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (11) , 2201-2204
A Novel Dual-Sheet-Beam Backward Wave Oscillator Based on Sub-Terahertz Band V-Shaped Orthogonal Grating Waveguide
A sub-terahertz band dual-sheet-beam backward wave oscillator (BWO) highlighted with wide tunable bandwidth and enhanced radiation power is presented in this letter. This design includes two key innovations: 1) a novel V-shaped orthogonal grating waveguide (VOGW) operating in TM $_{{21}}^{\text {++}}$ high-order mode (++ represents the electric field vectors within two beam tunnel regions are in-phase) is proposed, which exhibits higher coupling impedance compared with the traditional OGW; 2) a novel E-plane L-bend overmoded coupler with a tapered transition is designed for efficient power extraction of the TM $_{{21}}^{\text {++}}$ mode. For verification, an interaction circuit made of 40-period VOGW and two identical couplers was fabricated, and the measured results agreed well with simulation predictions having considered conduct loss and assembly errors. PIC simulation for this innovative BWO predicts a stable radiation power of 182.4-317.5 W across 246.8-265.6 GHz, demonstrating a power increment of up to 43 W (~15%) in comparison to the OGW based BWO.
- 4 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (11) , 2201-2204
A Novel Dual-Sheet-Beam Backward Wave Oscillator Based on Sub-Terahertz Band V-Shaped Orthogonal Grating Waveguide
A sub-terahertz band dual-sheet-beam backward wave oscillator (BWO) highlighted with wide tunable bandwidth and enhanced radiation power is presented in this letter. This design includes two key innovations: 1) a novel V-shaped orthogonal grating waveguide (VOGW) operating in TM $_{{21}}^{\text {++}}$ high-order mode (++ represents the electric field vectors within two beam tunnel regions are in-phase) is proposed, which exhibits higher coupling impedance compared with the traditional OGW; 2) a novel E-plane L-bend overmoded coupler with a tapered transition is designed for efficient power extraction of the TM $_{{21}}^{\text {++}}$ mode. For verification, an interaction circuit made of 40-period VOGW and two identical couplers was fabricated, and the measured results agreed well with simulation predictions having considered conduct loss and assembly errors. PIC simulation for this innovative BWO predicts a stable radiation power of 182.4-317.5 W across 246.8-265.6 GHz, demonstrating a power increment of up to 43 W (~15%) in comparison to the OGW based BWO.
- 15 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (6) , 3902-3908
Study of a Dual-Sheet Beam Electron Optic System
In comparison to single-sheet electron beam devices, the output power of multiple-sheet electron beam devices is hopeful to be significantly enhanced due to the increased beam current. One of the most important issues restricting the development of multiple-sheet electron beam devices is the generation and stable transmission of multiple-sheet electron beams. In this article, the design of two dual-sheet-beam electron optic systems (EOSs) with significant features of long transmission distance and high beam current density is presented. Additionally, both of them have achieved a high compression factor and a large aspect ratio. To verify the design, a uniform permanent magnetic focusing structure was fabricated and measured, showing that it could provide an axial magnetic field of ~0.4 T. The designed EOS is applied in a dual-sheet electron beam backward wave oscillator (BWO) and simulation results of the entire BWO show that it is capable of generating an output power of >200 W over a wide bandwidth of 15 GHz (218–233 GHz).
- 15 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (6) , 3902-3908
Study of a Dual-Sheet Beam Electron Optic System
In comparison to single-sheet electron beam devices, the output power of multiple-sheet electron beam devices is hopeful to be significantly enhanced due to the increased beam current. One of the most important issues restricting the development of multiple-sheet electron beam devices is the generation and stable transmission of multiple-sheet electron beams. In this article, the design of two dual-sheet-beam electron optic systems (EOSs) with significant features of long transmission distance and high beam current density is presented. Additionally, both of them have achieved a high compression factor and a large aspect ratio. To verify the design, a uniform permanent magnetic focusing structure was fabricated and measured, showing that it could provide an axial magnetic field of ~0.4 T. The designed EOS is applied in a dual-sheet electron beam backward wave oscillator (BWO) and simulation results of the entire BWO show that it is capable of generating an output power of >200 W over a wide bandwidth of 15 GHz (218–233 GHz).
- 31 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (3) , 2133-2139
A Terahertz-Band Rectangular TE10 to Circular TE01 Mode Converter
The design, fabrication, and experimental measurement of a broadband and compact TE $^{\Box}_{\text{10}}$ –TE $^{\circ}_{\text{01}}$ (symbols $\Box$ $^{^{^{}}}$ and $\circ $ represent the rectangular and circular waveguides, respectively) mode converter is presented in this article. The proposed mode converter consists of three components, including a TE $^{\Box}_{\text{10}}$ –TE $^{\Box}_{\text{20}}$ mode converter based on a two-way H-T junction power divider, a TE $^{\Box}_{\text{20}}$ –TE $^{+}_{\text{22}}$ mode converter with variable cross-shaped waveguide, and a TE $^{+}_{\text{22}}$ –TE $^{\circ}_{\text{01}}$ mode converter. Two distinct design schemes have been employed for the first part of the TE $^{\Box}_{\text{10}}$ –TE $^{\circ}_{\text{01}}$ mode converter, which are based on two-way $^{^{^{}}}$ H-T junction power dividers with a path difference of odd times half-waveguide wavelength (Scheme 1) and a 180 $^{\circ}$ phase shifter (Scheme 2), respectively. This mode converter is highlighted by the significant advantage of high conversion efficiency over a wide bandwidth with a relatively easy-to-fabricate structure, which is evidenced by the measurement of two identical back-to-back joined mode converters based on Scheme 1. Measurement results matched with simulation ones within reasonable accuracy, which predicted that a 1-dB transmission bandwidth of $\sim$ 56.7 GHz was obtained. Meanwhile, the reflection coefficient S $_{\text{11}}$ was below $-$ 13.2 dB over that bandwidth.
- 31 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (3) , 2133-2139
A Terahertz-Band Rectangular TE10 to Circular TE01 Mode Converter
The design, fabrication, and experimental measurement of a broadband and compact TE $^{\Box}_{\text{10}}$ –TE $^{\circ}_{\text{01}}$ (symbols $\Box$ $^{^{^{}}}$ and $\circ $ represent the rectangular and circular waveguides, respectively) mode converter is presented in this article. The proposed mode converter consists of three components, including a TE $^{\Box}_{\text{10}}$ –TE $^{\Box}_{\text{20}}$ mode converter based on a two-way H-T junction power divider, a TE $^{\Box}_{\text{20}}$ –TE $^{+}_{\text{22}}$ mode converter with variable cross-shaped waveguide, and a TE $^{+}_{\text{22}}$ –TE $^{\circ}_{\text{01}}$ mode converter. Two distinct design schemes have been employed for the first part of the TE $^{\Box}_{\text{10}}$ –TE $^{\circ}_{\text{01}}$ mode converter, which are based on two-way $^{^{^{}}}$ H-T junction power dividers with a path difference of odd times half-waveguide wavelength (Scheme 1) and a 180 $^{\circ}$ phase shifter (Scheme 2), respectively. This mode converter is highlighted by the significant advantage of high conversion efficiency over a wide bandwidth with a relatively easy-to-fabricate structure, which is evidenced by the measurement of two identical back-to-back joined mode converters based on Scheme 1. Measurement results matched with simulation ones within reasonable accuracy, which predicted that a 1-dB transmission bandwidth of $\sim$ 56.7 GHz was obtained. Meanwhile, the reflection coefficient S $_{\text{11}}$ was below $-$ 13.2 dB over that bandwidth.
- 18 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 51 (8) , 2199-2204
Study of a 0.3-THz Extended Interaction Oscillator Based on the Pseudospark-Sourced Sheet Electron Beam
Our previous experimental study of a 0.2-THz extended interaction oscillator (EIO) driven by the pseudospark-sourced (PS) sheet electron beam has revealed one key issue: the discrepancy between the simulated and measured output power was dramatically large. Around this issue, the design and analysis of an improved 0.3-THz EIO are presented in this article. To make the prediction closer to the actual situation, a few factors, including the plasma effect, the ohmic loss caused by the surface roughness, the effective beam current, and the energy spread, are analyzed and considered in the simulations. The plasma is equivalent to a dielectric. To verify the design, the interaction circuit of the 0.3-THz EIO was microfabricated. Its RF performance was measured by using a vector network analyzer, which was in good agreement with the simulation prediction, and its surface roughness was measured by using an optical 3-D surface profiler. Beam–wave interaction simulations having considered the ohmic loss, energy spread, and plasma effect predicted that the upgraded EIO still could produce an output power of 16.3 W at 295.3 GHz.
- 18 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 51 (8) , 2199-2204
Study of a 0.3-THz Extended Interaction Oscillator Based on the Pseudospark-Sourced Sheet Electron Beam
Our previous experimental study of a 0.2-THz extended interaction oscillator (EIO) driven by the pseudospark-sourced (PS) sheet electron beam has revealed one key issue: the discrepancy between the simulated and measured output power was dramatically large. Around this issue, the design and analysis of an improved 0.3-THz EIO are presented in this article. To make the prediction closer to the actual situation, a few factors, including the plasma effect, the ohmic loss caused by the surface roughness, the effective beam current, and the energy spread, are analyzed and considered in the simulations. The plasma is equivalent to a dielectric. To verify the design, the interaction circuit of the 0.3-THz EIO was microfabricated. Its RF performance was measured by using a vector network analyzer, which was in good agreement with the simulation prediction, and its surface roughness was measured by using an optical 3-D surface profiler. Beam–wave interaction simulations having considered the ohmic loss, energy spread, and plasma effect predicted that the upgraded EIO still could produce an output power of 16.3 W at 295.3 GHz.
- 29 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 51 (7) , 2105-2111
Study of a Wideband TE°21/TE°01 Mode Converter for Subterahertz Gyrotron Traveling-Wave Tubes
A novel design methodology of a TE $^{\mathrm{{\circ}}}_{{21}}$ /TE $^{\mathrm{{\circ}}}_{{01}}$ mode converter for gyrotron traveling-wave tubes (gyro-TWTs) is presented in this article. This type of mode converter is characterized by its broad bandwidth. The proposed mode converter consists of two-mode conversion sections (TE $^{\mathrm{\pmb{\circ }}}_{{10}}$ –TE $^{\mathrm{\pmb{\circ}}}_{{20}}$ and TE $^{\mathrm{\pmb{\circ}}}_{{20}}$ –TE $^{\mathrm{{\circ}}}_{{21}}$ /TE $^{\mathrm{{\circ}}}_{{01}}$ ) and an overmoded coupling section. The feeding TE $^{\mathrm{\pmb{\circ }}}_{{10}}$ mode is first converted into the TE $^{\mathrm{\pmb{\circ }}}_{{20}}$ mode, then coupled by using an overmoded coupling structure, and finally converted into the desired TE $^{\mathrm{{\circ}}}_{{21}}$ /TE $^{\mathrm{{\circ}}}_{{01}}$ mode. For verification, two $H$ -band (220–325 GHz) back-to-back joined TE $^{\mathrm{{\circ}}}_{{21}}$ /TE $^{\mathrm{{\circ}}}_{{01}}$ mode converter prototypes were microfabricated and measured. The cold test showed that a measured 3-/2-dB transmission bandwidth of 58.9 GHz (235.2–294.1 GHz)/56.3 GHz (235.2–291.5 GHz) for the TE $^{\mathrm{{\circ}}}_{{21}}$ /TE $^{\mathrm{{\circ}}}_{{01}}$ mode converter was obtained.
- 29 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 51 (7) , 2105-2111
Study of a Wideband TE°21/TE°01 Mode Converter for Subterahertz Gyrotron Traveling-Wave Tubes
A novel design methodology of a TE $^{\mathrm{{\circ}}}_{{21}}$ /TE $^{\mathrm{{\circ}}}_{{01}}$ mode converter for gyrotron traveling-wave tubes (gyro-TWTs) is presented in this article. This type of mode converter is characterized by its broad bandwidth. The proposed mode converter consists of two-mode conversion sections (TE $^{\mathrm{\pmb{\circ }}}_{{10}}$ –TE $^{\mathrm{\pmb{\circ}}}_{{20}}$ and TE $^{\mathrm{\pmb{\circ}}}_{{20}}$ –TE $^{\mathrm{{\circ}}}_{{21}}$ /TE $^{\mathrm{{\circ}}}_{{01}}$ ) and an overmoded coupling section. The feeding TE $^{\mathrm{\pmb{\circ }}}_{{10}}$ mode is first converted into the TE $^{\mathrm{\pmb{\circ }}}_{{20}}$ mode, then coupled by using an overmoded coupling structure, and finally converted into the desired TE $^{\mathrm{{\circ}}}_{{21}}$ /TE $^{\mathrm{{\circ}}}_{{01}}$ mode. For verification, two $H$ -band (220–325 GHz) back-to-back joined TE $^{\mathrm{{\circ}}}_{{21}}$ /TE $^{\mathrm{{\circ}}}_{{01}}$ mode converter prototypes were microfabricated and measured. The cold test showed that a measured 3-/2-dB transmission bandwidth of 58.9 GHz (235.2–294.1 GHz)/56.3 GHz (235.2–291.5 GHz) for the TE $^{\mathrm{{\circ}}}_{{21}}$ /TE $^{\mathrm{{\circ}}}_{{01}}$ mode converter was obtained.
- 24 April 2023
- Published by Springer Nature
- p. 742-746
Preliminary Research of a Terahertz Band High-Order Mode Backward Wave Oscillator
- 24 April 2023
- Published by Springer Nature
- p. 742-746
Preliminary Research of a Terahertz Band High-Order Mode Backward Wave Oscillator