Yingcai Wan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yingcai Wan has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Lijin Fang
Faculty of Robot Science and Engineering, Northeastern University, Shenyang, China
7 shared publications - Qiankun Zhao
Northeastern University,Faculty of Robot Science and Engineering,Shen Yang,China
5 shared publications - Huaizhen Wang
Institute of Shandong New Generation Information Industry Technology, Inspur group, Gangxing road Jinan, 250101, China
2 shared publications - Jiqian Xu
School of Mechatronics Engineering, Shenyang Aerospace University, Shenyang 110136, China
2 shared publications Li Li
Faculty of Electrical and Control Engineering, Liaoning Technical University, Hu Ludao, China
2 shared publications- Yue Gao
Beijing Machine Tool Research Institute, Beijing, China, China
2 shared publications
Latest Publications
- 29 September 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
A novel dynamic model parameters identification method for robotic manipulator based on the feasible physical constraints
The dynamic model of robots plays a crucial role in control tasks. The traditional Coulomb-viscous friction model inadequately describes friction torque, and the conventional identification strategy is ineffective in accurately identifying dynamic models with full physical parameters while meeting physically feasible constraints. In this paper, we propose a two-step strategy for identifying dynamic model parameters of manipulators based on nonlinear friction models. We establish the manipulator dynamic model using an improved Stribeck friction model. Firstly, the manipulator and friction force are separated, maintaining the nonlinear characteristics of the friction force while linearizing the manipulator. Secondly, the two components are optimized separately, incorporating physical feasibility constraints throughout the process. To evaluate the proposed method, a series of comparison experiments are conducted on the xMate Pro 3 manipulator plant. Experimental results demonstrate that the two-step identification strategy significantly improves identification accuracy. Meanwhile, the improved Stribeck friction model improves the comprehensive accuracy of parameter identification by 46%.
- 29 September 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
A novel dynamic model parameters identification method for robotic manipulator based on the feasible physical constraints
The dynamic model of robots plays a crucial role in control tasks. The traditional Coulomb-viscous friction model inadequately describes friction torque, and the conventional identification strategy is ineffective in accurately identifying dynamic models with full physical parameters while meeting physically feasible constraints. In this paper, we propose a two-step strategy for identifying dynamic model parameters of manipulators based on nonlinear friction models. We establish the manipulator dynamic model using an improved Stribeck friction model. Firstly, the manipulator and friction force are separated, maintaining the nonlinear characteristics of the friction force while linearizing the manipulator. Secondly, the two components are optimized separately, incorporating physical feasibility constraints throughout the process. To evaluate the proposed method, a series of comparison experiments are conducted on the xMate Pro 3 manipulator plant. Experimental results demonstrate that the two-step identification strategy significantly improves identification accuracy. Meanwhile, the improved Stribeck friction model improves the comprehensive accuracy of parameter identification by 46%.
- Open Access
Observer-Based Finite-Time Prescribed Performance Sliding Mode Control of Dual-Motor Joints-Driven Robotic Manipulators with Uncertainties and Disturbances
Considering system uncertainties (e.g., gear backlash, unmodeled dynamics, nonlinear friction and parameters perturbation) coupling disturbances weaken the motion performance of robotic systems, an observer-based finite-time prescribed performance sliding mode control with faster reaching law is proposed for robotic manipulators equipped with dual-motor joints (DMJs). In the case where the backlash information is completely unknown, the backlash is maximally eliminated using a simple but efficient dual-motor adaptive anti-backlash strategy. Thus, the design of position tracking controllers for DMJs can be simplified. Then, to deal with the influence of disturbances and residual uncertainties (excluding backlash), a novel finite-time adaptive sliding mode disturbance observer (ASMDO) is proposed to practically estimate the lumped uncertainties where their upper bounds are assumed to be unknown. Finally, a finite-time composite fast non-singular terminal sliding mode (TSM) controller, integrated with the prescribed performance principle, is proposed in this paper. To enhance the convergence rate, a novel TSM-type reaching law has been developed. The controller ensures that the tracking error is not only stabilized within a finite-time convergence rate but also adheres to a predefined maximum transient-steady-state error. The proposed scheme is implemented through simulation and experimental results, demonstrating its superior performance.
Open AccessObserver-Based Finite-Time Prescribed Performance Sliding Mode Control of Dual-Motor Joints-Driven Robotic Manipulators with Uncertainties and Disturbances
Considering system uncertainties (e.g., gear backlash, unmodeled dynamics, nonlinear friction and parameters perturbation) coupling disturbances weaken the motion performance of robotic systems, an observer-based finite-time prescribed performance sliding mode control with faster reaching law is proposed for robotic manipulators equipped with dual-motor joints (DMJs). In the case where the backlash information is completely unknown, the backlash is maximally eliminated using a simple but efficient dual-motor adaptive anti-backlash strategy. Thus, the design of position tracking controllers for DMJs can be simplified. Then, to deal with the influence of disturbances and residual uncertainties (excluding backlash), a novel finite-time adaptive sliding mode disturbance observer (ASMDO) is proposed to practically estimate the lumped uncertainties where their upper bounds are assumed to be unknown. Finally, a finite-time composite fast non-singular terminal sliding mode (TSM) controller, integrated with the prescribed performance principle, is proposed in this paper. To enhance the convergence rate, a novel TSM-type reaching law has been developed. The controller ensures that the tracking error is not only stabilized within a finite-time convergence rate but also adheres to a predefined maximum transient-steady-state error. The proposed scheme is implemented through simulation and experimental results, demonstrating its superior performance.
- 6 June 2024
- Published by Elsevier in Measurement
- Vol. 236
Self-supervised rigid object 3-D motion estimation from monocular video
- 6 June 2024
- Published by Elsevier in Measurement
- Vol. 236
Self-supervised rigid object 3-D motion estimation from monocular video
- 17 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 7870-7874
Enhancing Monocular 3D Object Detection with Occlusion Compensation
In the context of autonomous driving, occlusion significantly impacts the accuracy of monocular 3D object detection. To address this issue, a monocular 3D detection occlusion compensation algorithm is proposed to optimize the detection results affected by occlusion. The approach involves integrating an occlusion processing module into the 3D object detection pipeline. This module analyzes and handles occluded vehicles by leveraging 2D object detection results to infer occlusion relation-ships. Subsequently, the occluded local features associated with these relationships are captured by the local feature processing module and then input to the occlusion processing network. The resulting occlusion compensation offset is fed into the 3D object detection branch. Experimental results demonstrate that the method outperforms existing approaches on the KITTI 3D object detection benchmark.
- 17 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 7870-7874
Enhancing Monocular 3D Object Detection with Occlusion Compensation
In the context of autonomous driving, occlusion significantly impacts the accuracy of monocular 3D object detection. To address this issue, a monocular 3D detection occlusion compensation algorithm is proposed to optimize the detection results affected by occlusion. The approach involves integrating an occlusion processing module into the 3D object detection pipeline. This module analyzes and handles occluded vehicles by leveraging 2D object detection results to infer occlusion relation-ships. Subsequently, the occluded local features associated with these relationships are captured by the local feature processing module and then input to the occlusion processing network. The resulting occlusion compensation offset is fed into the 3D object detection branch. Experimental results demonstrate that the method outperforms existing approaches on the KITTI 3D object detection benchmark.
- 27 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 8 (12) , 8327-8334
A Robotic Manipulator Using Dual-Motor Joints: Prototype Design and Anti-Backlash Control
This letter focuses on the design and control of a novel seven-degree-of-freedom (7-DOF) robotic manipulator (D-Arm) to address the issue of backlash nonlinearity coupling unknown disturbance through the dual-motor anti-backlash control technology. Specifically, the first three axes of the D-Arm near the base are implemented as dual-motor joints (DMJs), while the remaining four axes are single-motor joints (SMJs), which achieve a more comprehensive performance. For DMJs, as over-actuated systems, we first discover an internal disturbance phenomenon named servo-conflict and consider it in the controller design. To mitigate the adverse effects of backlash coupling disturbance, an admittance control-based position compensator is proposed. Then, after the backlash elimination, a dual-motor linear active disturbance rejection controller is effectively developed for load tracking task of the DMJ. In the presence of unknown backlash and disturbance, the proposed strategy can improve both transient and steady-state position tracking response, reduce energy consumption without requiring any backlash model information. The effectiveness and simplicity of the developed control strategy are verified through comparative experiments on the D-Arm.
- 27 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 8 (12) , 8327-8334
A Robotic Manipulator Using Dual-Motor Joints: Prototype Design and Anti-Backlash Control
This letter focuses on the design and control of a novel seven-degree-of-freedom (7-DOF) robotic manipulator (D-Arm) to address the issue of backlash nonlinearity coupling unknown disturbance through the dual-motor anti-backlash control technology. Specifically, the first three axes of the D-Arm near the base are implemented as dual-motor joints (DMJs), while the remaining four axes are single-motor joints (SMJs), which achieve a more comprehensive performance. For DMJs, as over-actuated systems, we first discover an internal disturbance phenomenon named servo-conflict and consider it in the controller design. To mitigate the adverse effects of backlash coupling disturbance, an admittance control-based position compensator is proposed. Then, after the backlash elimination, a dual-motor linear active disturbance rejection controller is effectively developed for load tracking task of the DMJ. In the presence of unknown backlash and disturbance, the proposed strategy can improve both transient and steady-state position tracking response, reduce energy consumption without requiring any backlash model information. The effectiveness and simplicity of the developed control strategy are verified through comparative experiments on the D-Arm.
- 15 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 604-609
Monocular 3D Object Detection Based on Occlusion Optimization
Obtaining accurate 3D bounding boxes from monocular images is a challenging task. In autonomous driving scenarios, mutual occlusion between objects is a common situation, and that is one of the main factors affecting the accuracy of 3D object detection. Aiming at solving the occlusion problem, this paper proposes a monocular 3D object detection method that integrates occlusion differential processing. We propose an occlusion processing branch to process the filtered occlusion feature maps from global and optimize the 3D prediction results with predicted occlusion compensation. We validate our method on the KITTI 3D object detection benchmark, and experiments show that our prediction accuracy for occluded objects is significantly improved.
- 15 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 604-609
Monocular 3D Object Detection Based on Occlusion Optimization
Obtaining accurate 3D bounding boxes from monocular images is a challenging task. In autonomous driving scenarios, mutual occlusion between objects is a common situation, and that is one of the main factors affecting the accuracy of 3D object detection. Aiming at solving the occlusion problem, this paper proposes a monocular 3D object detection method that integrates occlusion differential processing. We propose an occlusion processing branch to process the filtered occlusion feature maps from global and optimize the 3D prediction results with predicted occlusion compensation. We validate our method on the KITTI 3D object detection benchmark, and experiments show that our prediction accuracy for occluded objects is significantly improved.
- Open Access
- 2 March 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (5) , 1228
Multi-Sensor Fusion Self-Supervised Deep Odometry and Depth Estimation
This paper presents a new deep visual-inertial odometry and depth estimation framework for improving the accuracy of depth estimation and ego-motion from image sequences and inertial measurement unit (IMU) raw data. The proposed framework predicts ego-motion and depth with absolute scale in a self-supervised manner. We first capture dense features and solve the pose by deep visual odometry (DVO), and then combine the pose estimation pipeline with deep inertial odometry (DIO) by the extended Kalman filter (EKF) method to produce the sparse depth and pose with absolute scale. We then join deep visual-inertial odometry (DeepVIO) with depth estimation by using sparse depth and the pose from DeepVIO pipeline to align the scale of the depth prediction with the triangulated point cloud and reduce image reconstruction error. Specifically, we use the strengths of learning-based visual-inertial odometry (VIO) and depth estimation to build an end-to-end self-supervised learning architecture. We evaluated the new framework on the KITTI datasets and compared it to the previous techniques. We show that our approach improves results for ego-motion estimation and achieves comparable results for depth estimation, especially in the detail area.
- 2 March 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (5) , 1228
Open AccessMulti-Sensor Fusion Self-Supervised Deep Odometry and Depth Estimation
This paper presents a new deep visual-inertial odometry and depth estimation framework for improving the accuracy of depth estimation and ego-motion from image sequences and inertial measurement unit (IMU) raw data. The proposed framework predicts ego-motion and depth with absolute scale in a self-supervised manner. We first capture dense features and solve the pose by deep visual odometry (DVO), and then combine the pose estimation pipeline with deep inertial odometry (DIO) by the extended Kalman filter (EKF) method to produce the sparse depth and pose with absolute scale. We then join deep visual-inertial odometry (DeepVIO) with depth estimation by using sparse depth and the pose from DeepVIO pipeline to align the scale of the depth prediction with the triangulated point cloud and reduce image reconstruction error. Specifically, we use the strengths of learning-based visual-inertial odometry (VIO) and depth estimation to build an end-to-end self-supervised learning architecture. We evaluated the new framework on the KITTI datasets and compared it to the previous techniques. We show that our approach improves results for ego-motion estimation and achieves comparable results for depth estimation, especially in the detail area.
- 1 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 83, 469-473
Multi-scale Deep CNN Network for Unsupervised Monocular Depth Estimation
Depth estimation problem is one of the most critical issues for robot SLAM.In this paper, the current unsupervised depth estimation method is mainly focused on single-scale features in CNN convolutional network architecture, and does not make full use of multi-scale features along the network.In addition, the design of the loss function for depth estimation is also adapted to the single scale.In this paper, we also propose a multi-scale unsupervised depth estimation for the above problems, and introduce a matching loss function to adapt to the training of multi-scale networks. Experiments were carried out on the KITTI dataset. The experimental results show that the proposed method improves the accuracy and efficiency of depth estimation.
- 1 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 83, 469-473
Multi-scale Deep CNN Network for Unsupervised Monocular Depth Estimation
Depth estimation problem is one of the most critical issues for robot SLAM.In this paper, the current unsupervised depth estimation method is mainly focused on single-scale features in CNN convolutional network architecture, and does not make full use of multi-scale features along the network.In addition, the design of the loss function for depth estimation is also adapted to the single scale.In this paper, we also propose a multi-scale unsupervised depth estimation for the above problems, and introduce a matching loss function to adapt to the training of multi-scale networks. Experiments were carried out on the KITTI dataset. The experimental results show that the proposed method improves the accuracy and efficiency of depth estimation.