Yixuan Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yixuan Li has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Junqi Sun
State Key Laboratory of Supramolecular Structure and Materials College of Chemistry Jilin University Changchun People's Republic of China
7 shared publications Junqi Sun
State Key Laboratory of Supramolecular Structure and Materials College of Chemistry Jilin University Changchun 130012 P. R. China
3 shared publications- Xiaohan Wang
State Key Laboratory of Supramolecular Structure and Materials College of Chemistry Jilin University Changchun P. R. China
3 shared publications Xu Fang
State Key Laboratory of Supramolecular Structure and Materials, College of Chemistry, Jilin University, Changchun 130012, People’s Republic of China
3 shared publicationsChenshuo Li
State Key Laboratory of Supramolecular Structure and Materials College of Chemistry Jilin University Changchun P. R. China
2 shared publicationsGuitian Tai
State Key Laboratory of Supramolecular Structure and Materials College of Chemistry Jilin University Changchun 130012 P. R. China
2 shared publications
Latest Publications
- 10 September 2026
- Published by Wiley in Archaeometry
Evaluation of Preservation State of Waterlogged Archaeological Woods From Chijiaoyu Shipwrecks
The Chijiaoyu shipwrecks, unearthed in the Haitan Strait of Fujian Province in April 2023, represent an important discovery for advancing research on the Maritime Silk Road. In this work, waterlogged archaeological woods (WAWs) obtained from the Chijiaoyu I (CJY‐1) and Chijiaoyu II (CJY‐2 and CJY‐2S) shipwrecks are comprehensively analyzed to evaluate their preservation state and provide scientific information for conservation strategy in future. Multidisciplinary methods including anatomical, physical, and chemical analyses are employed. Anatomical identification reveals CJY‐1 is Chinese fir and CJY‐2 and CJY‐2S are pine wood. The physical parameters including maximum water content (MWC), basic density (BD), and residual basic density (RBD) indicate different degradation levels: CJY‐1 exhibits a MWC of ~347.3%, while CJY‐2 and CJY‐2S reach higher MWC of ~543.2% and ~516.8%, reflecting more severe deterioration. The chemical composition results of CJY‐1, CJY‐2, and CJY‐2S confirm the loss of cellulose and hemicellulose, accompanied by relative lignin enrichment, particularly in the Chijiaoyu II samples. Fourier‐transform infrared (FTIR) spectra also support these compositional changes. Scanning electron microscopy (SEM) images reveal the microstructure deterioration in all samples owing to the polysaccharide degradation. Additionally, inorganic deposits analyses show iron compounds as the predominant deposits in analyzed WAWs, while the different Fe, S, and Ca contents between CJY‐2 and CJY‐2S indicate local heterogeneity in inorganic deposition. These results provide a systematic understanding of the preservation state of available WAWs from the Chijiaoyu shipwrecks and offer valuable scientific information for developing targeted conservation plan.
- 10 September 2026
- Published by Wiley in Archaeometry
Evaluation of Preservation State of Waterlogged Archaeological Woods From Chijiaoyu Shipwrecks
The Chijiaoyu shipwrecks, unearthed in the Haitan Strait of Fujian Province in April 2023, represent an important discovery for advancing research on the Maritime Silk Road. In this work, waterlogged archaeological woods (WAWs) obtained from the Chijiaoyu I (CJY‐1) and Chijiaoyu II (CJY‐2 and CJY‐2S) shipwrecks are comprehensively analyzed to evaluate their preservation state and provide scientific information for conservation strategy in future. Multidisciplinary methods including anatomical, physical, and chemical analyses are employed. Anatomical identification reveals CJY‐1 is Chinese fir and CJY‐2 and CJY‐2S are pine wood. The physical parameters including maximum water content (MWC), basic density (BD), and residual basic density (RBD) indicate different degradation levels: CJY‐1 exhibits a MWC of ~347.3%, while CJY‐2 and CJY‐2S reach higher MWC of ~543.2% and ~516.8%, reflecting more severe deterioration. The chemical composition results of CJY‐1, CJY‐2, and CJY‐2S confirm the loss of cellulose and hemicellulose, accompanied by relative lignin enrichment, particularly in the Chijiaoyu II samples. Fourier‐transform infrared (FTIR) spectra also support these compositional changes. Scanning electron microscopy (SEM) images reveal the microstructure deterioration in all samples owing to the polysaccharide degradation. Additionally, inorganic deposits analyses show iron compounds as the predominant deposits in analyzed WAWs, while the different Fe, S, and Ca contents between CJY‐2 and CJY‐2S indicate local heterogeneity in inorganic deposition. These results provide a systematic understanding of the preservation state of available WAWs from the Chijiaoyu shipwrecks and offer valuable scientific information for developing targeted conservation plan.
- Open Access
- 12 July 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (46) , e74001
Resolving the Strength–Modulus–Elasticity Tradeoff in Elastomers Using Dual Phase‐Separated Nanodomains
Achieving elastomers that simultaneously combine ultrahigh strength, high modulus, and excellent elasticity remains a longstanding challenge because these properties are intrinsically conflicting. Here, we report a dual phase‐separated nanodomain strategy that resolves this trade‐off by transforming reversible cross‐links into spatially confined reinforcing nanodomains. Elastomers are fabricated via copolymerization of rigid aromatic polyurea segments with flexible poly(urethane‐urea) chains containing acylsemicarbazide moieties. The resulting elastomers exhibit an exceptional combination of mechanical properties, including tensile strength of 104.6 MPa, Young's modulus of 43.1 MPa, toughness of 350 MJ m −3 , and full recovery after 600% strain. Small‐angle x‐ray scattering and electron microscopy reveal two distinct nanodomains originating from self‐assembled aromatic polyurea segments and acylsemicarbazide‐stacked hydrogen‐bond arrays, respectively. Their synergistic reinforcement increases matrix rigidity while preserving entropy elasticity, enabling the simultaneous realization of ultrahigh mechanical robustness and excellent elastic recovery. The elastomers further demonstrate outstanding puncture resistance, environmental stability, healability, and reprocessability. When used as binders for carbon‐fiber fabrics, the composites achieve record‐high fracture energies of up to 2059 kJ m −2 , owing to the exceptional mechanical robustness and energy dissipation of the elastomer, together with strong elastomer‐fiber interfacial adhesion. This dual nanodomain design provides a novel route to high‐performance elastomers that transcend conventional strength‐modulus‐elasticity trade‐offs.
- 12 July 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (46) , e74001
Open AccessResolving the Strength–Modulus–Elasticity Tradeoff in Elastomers Using Dual Phase‐Separated Nanodomains
Achieving elastomers that simultaneously combine ultrahigh strength, high modulus, and excellent elasticity remains a longstanding challenge because these properties are intrinsically conflicting. Here, we report a dual phase‐separated nanodomain strategy that resolves this trade‐off by transforming reversible cross‐links into spatially confined reinforcing nanodomains. Elastomers are fabricated via copolymerization of rigid aromatic polyurea segments with flexible poly(urethane‐urea) chains containing acylsemicarbazide moieties. The resulting elastomers exhibit an exceptional combination of mechanical properties, including tensile strength of 104.6 MPa, Young's modulus of 43.1 MPa, toughness of 350 MJ m −3 , and full recovery after 600% strain. Small‐angle x‐ray scattering and electron microscopy reveal two distinct nanodomains originating from self‐assembled aromatic polyurea segments and acylsemicarbazide‐stacked hydrogen‐bond arrays, respectively. Their synergistic reinforcement increases matrix rigidity while preserving entropy elasticity, enabling the simultaneous realization of ultrahigh mechanical robustness and excellent elastic recovery. The elastomers further demonstrate outstanding puncture resistance, environmental stability, healability, and reprocessability. When used as binders for carbon‐fiber fabrics, the composites achieve record‐high fracture energies of up to 2059 kJ m −2 , owing to the exceptional mechanical robustness and energy dissipation of the elastomer, together with strong elastomer‐fiber interfacial adhesion. This dual nanodomain design provides a novel route to high‐performance elastomers that transcend conventional strength‐modulus‐elasticity trade‐offs.
- Open Access
- 28 May 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (51) , e76168
Low‐Hysteresis Liquid‐Free Ionic Conductors With Superior Toughness and High Mechanical Strength Enabled by Conformationally Changeable Crosslinkers
Low hysteresis, superior toughness, and high mechanical strength are essential for enhancing the reliability and durability of stretchable ionic conductors. However, the production of ionic conductors with these mutually exclusive properties remains a great challenge. Herein, low‐hysteresis and highly resilient liquid‐free ionic conductors with a high strength of ∼4.0 MPa and a high toughness of ∼19.6 MJ/m 3 are fabricated by complexation of vanillin‐grafted polyvinyl alcohol (VPVA) and solid‐state ionic liquid (IL), followed by being crosslinked through 1,1'‐ferrocenedicarboxaldehyde (FcDa) with the force‐dependent conformational change characteristic (denoted as V‐I‐F). During small mechanical loading (≤200% strain), FcDa serve as rigid crosslinkers to efficiently suppress energy dissipation of the V‐I‐F ionic conductors, resulting in conductors with low hysteresis. Upon large mechanical loading, ferrocene in FcDa significantly deforms to activate sufficient energy dissipation pathways, which dramatically improve the toughness and damage resistance of ionic conductors. Even after being crushed by a 1.5‐ton car for 20 times, the V‐I‐F ionic conductors can still immediately recover to their original shape without damage and IL leakage. Meanwhile, the V‐I‐F ionic conductors show extremely low‐hysteresis properties in electrical response aspect and display highly stable and reproducible sensing performances over 4500 uninterrupted loading–unloading cycles at a 200% strain.
- 28 May 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (51) , e76168
Open AccessLow‐Hysteresis Liquid‐Free Ionic Conductors With Superior Toughness and High Mechanical Strength Enabled by Conformationally Changeable Crosslinkers
Low hysteresis, superior toughness, and high mechanical strength are essential for enhancing the reliability and durability of stretchable ionic conductors. However, the production of ionic conductors with these mutually exclusive properties remains a great challenge. Herein, low‐hysteresis and highly resilient liquid‐free ionic conductors with a high strength of ∼4.0 MPa and a high toughness of ∼19.6 MJ/m 3 are fabricated by complexation of vanillin‐grafted polyvinyl alcohol (VPVA) and solid‐state ionic liquid (IL), followed by being crosslinked through 1,1'‐ferrocenedicarboxaldehyde (FcDa) with the force‐dependent conformational change characteristic (denoted as V‐I‐F). During small mechanical loading (≤200% strain), FcDa serve as rigid crosslinkers to efficiently suppress energy dissipation of the V‐I‐F ionic conductors, resulting in conductors with low hysteresis. Upon large mechanical loading, ferrocene in FcDa significantly deforms to activate sufficient energy dissipation pathways, which dramatically improve the toughness and damage resistance of ionic conductors. Even after being crushed by a 1.5‐ton car for 20 times, the V‐I‐F ionic conductors can still immediately recover to their original shape without damage and IL leakage. Meanwhile, the V‐I‐F ionic conductors show extremely low‐hysteresis properties in electrical response aspect and display highly stable and reproducible sensing performances over 4500 uninterrupted loading–unloading cycles at a 200% strain.
- 26 December 2025
- Published by American Chemical Society (ACS) in Accounts of Chemical Research
- Vol. 59 (2) , 298-310
Reversibly Cross-Linked Polymers: A New Method for High-Performance and Sustainable Polymer Materials
ConspectusConventional polymeric materials have profoundly shaped modern society by enabling the large-scale production of lightweight and mechanically robust products. However, their massive consumption and rapid proliferation have led to extensive environmental pollution and severe resource depletion. These escalating concerns underscore the urgent need for sustainable alternatives that exhibit inherent healing, reprocessing, and closed-loop recycling capabilities. Although noncovalent interactions and dynamic covalent bonds endow polymer materials with reversibility that is essential for sustainability, their intrinsically weaker and more labile nature relative to permanent covalent cross-links presents a critical challenge: how to retain dynamic functionality while simultaneously enhancing structural stability and achieving mechanical performances comparable to, or even surpassing, those of conventional polymers. To address this challenge, we recently developed the concept of reversibly cross-linked polymers (RCPs), a class of three-dimensional polymer networks fabricated by reversibly cross-linking polymer chains via noncovalent interactions and/or dynamic covalent bonds and feature intrinsic healing, reprocessing, or chemical recycling capabilities. Using polymers rather than small-molecule monomers as the primary building blocks maximizes the fraction of stable covalent bonds relative to reversible cross-links, ensuring sufficient mechanical strength and structural integrity. Furthermore, employing polymers with self-assembling or immiscible segments enables the in situ formation of reversibly cross-linked phase-separated nanostructures that act as nanofillers, significantly enhancing both the mechanical performance and structural stability of RCPs.This Account provides a comprehensive overview of our recent advances in the fabrication of high-performance RCPs, including plastics, elastomers, and ionogels/hydrogels. We begin by outlining the general design principles and versatile synthetic strategies for the development of RCPs. Central to our approach is the deliberate engineering of in situ formed, reversibly cross-linked phase-separated nanostructures with tunable rigidity, deformability, and dissociability. Rigid nanostructures endow RCPs with mechanical strengths comparable to or even exceeding those of conventional plastics and elastomers, whereas tough and deformable nanostructures dissipate energy efficiently under external loading, imparting both high strength and exceptional toughness to RCPs. This design enables the fabrication of RCPs with mechanical properties that are rarely attainable in conventional counterparts. For instance, reversibly cross-linked elastomers and ionogels/hydrogels can be endowed with extraordinary damage tolerance, ultrahigh tensile strength and modulus, and high-strength, low-hysteresis elasticity. The confinement of dynamic reversible cross-links within densely packed, hydrophobic phase-separated nanostructures or microenvironments markedly improves the thermal stability and solvent resistance of RCPs, thereby broadening their applications in demanding engineering and environmental conditions. Moreover, the dynamic nature of reversible cross-links enables efficient depolymerization of RCPs into (macro)monomers under mild, catalyst-free conditions, facilitating chemical recycling of both neat RCPs and carbon fiber/RCP composites. These advances establish RCPs as a promising materials platform capable of overcoming the long-standing trade-off between mechanical robustness and dynamic recyclability, opening new avenues for the development of sustainable, high-performance polymeric materials.
- 26 December 2025
- Published by American Chemical Society (ACS) in Accounts of Chemical Research
- Vol. 59 (2) , 298-310
Reversibly Cross-Linked Polymers: A New Method for High-Performance and Sustainable Polymer Materials
ConspectusConventional polymeric materials have profoundly shaped modern society by enabling the large-scale production of lightweight and mechanically robust products. However, their massive consumption and rapid proliferation have led to extensive environmental pollution and severe resource depletion. These escalating concerns underscore the urgent need for sustainable alternatives that exhibit inherent healing, reprocessing, and closed-loop recycling capabilities. Although noncovalent interactions and dynamic covalent bonds endow polymer materials with reversibility that is essential for sustainability, their intrinsically weaker and more labile nature relative to permanent covalent cross-links presents a critical challenge: how to retain dynamic functionality while simultaneously enhancing structural stability and achieving mechanical performances comparable to, or even surpassing, those of conventional polymers. To address this challenge, we recently developed the concept of reversibly cross-linked polymers (RCPs), a class of three-dimensional polymer networks fabricated by reversibly cross-linking polymer chains via noncovalent interactions and/or dynamic covalent bonds and feature intrinsic healing, reprocessing, or chemical recycling capabilities. Using polymers rather than small-molecule monomers as the primary building blocks maximizes the fraction of stable covalent bonds relative to reversible cross-links, ensuring sufficient mechanical strength and structural integrity. Furthermore, employing polymers with self-assembling or immiscible segments enables the in situ formation of reversibly cross-linked phase-separated nanostructures that act as nanofillers, significantly enhancing both the mechanical performance and structural stability of RCPs.This Account provides a comprehensive overview of our recent advances in the fabrication of high-performance RCPs, including plastics, elastomers, and ionogels/hydrogels. We begin by outlining the general design principles and versatile synthetic strategies for the development of RCPs. Central to our approach is the deliberate engineering of in situ formed, reversibly cross-linked phase-separated nanostructures with tunable rigidity, deformability, and dissociability. Rigid nanostructures endow RCPs with mechanical strengths comparable to or even exceeding those of conventional plastics and elastomers, whereas tough and deformable nanostructures dissipate energy efficiently under external loading, imparting both high strength and exceptional toughness to RCPs. This design enables the fabrication of RCPs with mechanical properties that are rarely attainable in conventional counterparts. For instance, reversibly cross-linked elastomers and ionogels/hydrogels can be endowed with extraordinary damage tolerance, ultrahigh tensile strength and modulus, and high-strength, low-hysteresis elasticity. The confinement of dynamic reversible cross-links within densely packed, hydrophobic phase-separated nanostructures or microenvironments markedly improves the thermal stability and solvent resistance of RCPs, thereby broadening their applications in demanding engineering and environmental conditions. Moreover, the dynamic nature of reversible cross-links enables efficient depolymerization of RCPs into (macro)monomers under mild, catalyst-free conditions, facilitating chemical recycling of both neat RCPs and carbon fiber/RCP composites. These advances establish RCPs as a promising materials platform capable of overcoming the long-standing trade-off between mechanical robustness and dynamic recyclability, opening new avenues for the development of sustainable, high-performance polymeric materials.
- 11 May 2025
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 46 (16) , e2500291
Mechanically Robust Nafion‐Based Anhydrous Proton Exchange Membranes with High Proton Conductivity and Efficient In Situ Self‐Healing Capacities
There is increasing demand for self‐healing high‐temperature proton exchange membranes (HT‐PEMs) with superior mechanical robustness and proton conductivity. In this study, the fabrication of mechanically robust HT‐PEMs (denoted as N‐IL‐PW) is demonstrated by integrating high proton conductivity and the ability to in situ heal fatigue and damage during operation via the complexation of Nafion, phosphotungstic acid (PW) clusters, and ionic liquids (ILs). Originating from the synergistic effect of high‐density electrostatic interactions as well as hydrogen bonds in ionic domains and stable crystalline domains, the N‐IL‐PW membranes are highly resilient and fatigue resistant, and display excellent creep resistance even at 170 °C. Under an anhydrous condition of ≈170 °C, the N‐IL‐PW membranes have a high proton conductivity of ≈18.86 mS cm −1 . Meanwhile, the hydrogen‐powered HT‐PEM fuel cells assembled with N‐IL‐PW membranes exhibit good cell performance under an anhydrous condition of ≈120 °C. More importantly, the reversibility of electrostatic and hydrogen bonding interactions enables the membranes in situ to heal fatigue and mechanical damages under fuel cell operation conditions. Healed membranes can regain their pristine mechanical properties, proton conductivity, hydrogen barrier property, and cell performance. Excellent high‐temperature creep resistance, fatigue resistance, and healing capability can work in concert to enhance the reliability of N‐IL‐PW membranes.
- 11 May 2025
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 46 (16) , e2500291
Mechanically Robust Nafion‐Based Anhydrous Proton Exchange Membranes with High Proton Conductivity and Efficient In Situ Self‐Healing Capacities
There is increasing demand for self‐healing high‐temperature proton exchange membranes (HT‐PEMs) with superior mechanical robustness and proton conductivity. In this study, the fabrication of mechanically robust HT‐PEMs (denoted as N‐IL‐PW) is demonstrated by integrating high proton conductivity and the ability to in situ heal fatigue and damage during operation via the complexation of Nafion, phosphotungstic acid (PW) clusters, and ionic liquids (ILs). Originating from the synergistic effect of high‐density electrostatic interactions as well as hydrogen bonds in ionic domains and stable crystalline domains, the N‐IL‐PW membranes are highly resilient and fatigue resistant, and display excellent creep resistance even at 170 °C. Under an anhydrous condition of ≈170 °C, the N‐IL‐PW membranes have a high proton conductivity of ≈18.86 mS cm −1 . Meanwhile, the hydrogen‐powered HT‐PEM fuel cells assembled with N‐IL‐PW membranes exhibit good cell performance under an anhydrous condition of ≈120 °C. More importantly, the reversibility of electrostatic and hydrogen bonding interactions enables the membranes in situ to heal fatigue and mechanical damages under fuel cell operation conditions. Healed membranes can regain their pristine mechanical properties, proton conductivity, hydrogen barrier property, and cell performance. Excellent high‐temperature creep resistance, fatigue resistance, and healing capability can work in concert to enhance the reliability of N‐IL‐PW membranes.
- 6 July 2024
- Published by Elsevier in Journal of Archaeological Science: Reports
- Vol. 57
Consolidation of waterlogged archaeological woods by reversibly cross-linked polymers
- 6 July 2024
- Published by Elsevier in Journal of Archaeological Science: Reports
- Vol. 57
Consolidation of waterlogged archaeological woods by reversibly cross-linked polymers
- 15 March 2023
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 5 (4) , 2830-2839
Healable, Recyclable, and Scratch-Resistant Polyurethane Elastomers Cross-Linked with Multiple Hydrogen Bonds
- 15 March 2023
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 5 (4) , 2830-2839
Healable, Recyclable, and Scratch-Resistant Polyurethane Elastomers Cross-Linked with Multiple Hydrogen Bonds
- 21 February 2023
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 44 (8) , e2300007
Highly Elastic, Healable, and Durable Anhydrous High‐Temperature Proton Exchange Membranes Cross‐Linked with Highly Dense Hydrogen Bonds
Proton exchange membranes (PEMs) with excellent durability and working stability are important for PEM fuel cells with extended service life and enhanced reliability. In this study, highly elastic, healable, and durable electrolyte membranes are fabricated by the complexation of poly(urea–urethane), ionic liquids (ILs), and MXene nanosheets (denoted as PU–IL–MX). The resulting PU–IL–MX electrolyte membranes have a tensile strength of ≈3.86 MPa and a strain at break of ≈281.89%. The PU–IL–MX electrolyte membranes can act as high temperature PEMs to conduct protons under an anhydrous condition of the temperatures above 100 °C. Importantly, the ultrahigh density of hydrogen‐bond‐cross‐linked network renders PU–IL–MX membranes excellent IL retention properties. The membranes can maintain more than ≈98% of their original weight and show no decline of proton conductivity after being placed under highly humid conditions of ≈80 °C and relative humidity of ≈85% for 10 days. Moreover, due to the reversibility of hydrogen bonds, the membranes can heal damage under the working conditions of fuel cells to restore their original mechanical properties, proton conductivities, and cell performances.
- 21 February 2023
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 44 (8) , e2300007
Highly Elastic, Healable, and Durable Anhydrous High‐Temperature Proton Exchange Membranes Cross‐Linked with Highly Dense Hydrogen Bonds
Proton exchange membranes (PEMs) with excellent durability and working stability are important for PEM fuel cells with extended service life and enhanced reliability. In this study, highly elastic, healable, and durable electrolyte membranes are fabricated by the complexation of poly(urea–urethane), ionic liquids (ILs), and MXene nanosheets (denoted as PU–IL–MX). The resulting PU–IL–MX electrolyte membranes have a tensile strength of ≈3.86 MPa and a strain at break of ≈281.89%. The PU–IL–MX electrolyte membranes can act as high temperature PEMs to conduct protons under an anhydrous condition of the temperatures above 100 °C. Importantly, the ultrahigh density of hydrogen‐bond‐cross‐linked network renders PU–IL–MX membranes excellent IL retention properties. The membranes can maintain more than ≈98% of their original weight and show no decline of proton conductivity after being placed under highly humid conditions of ≈80 °C and relative humidity of ≈85% for 10 days. Moreover, due to the reversibility of hydrogen bonds, the membranes can heal damage under the working conditions of fuel cells to restore their original mechanical properties, proton conductivities, and cell performances.
- 21 July 2022
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 38 (30) , 9050-9063
Noncovalently Cross-Linked Polymeric Materials Reinforced by Well-Designed In Situ-Formed Nanofillers
Noncovalently cross-linked polymeric materials generally exhibit lower mechanical robustness than traditional polymeric materials. Therefore, it is important to improve the mechanical properties of noncovalently cross-linked polymeric materials using an efficient and generalized approach. In this Perspective, we systematically summarized the recent development of noncovalently cross-linked polymeric materials reinforced by in situ-formed nanofillers. The synergy of high-density noncovalent interactions and in situ-formed rigid nanofillers provided an effective means for the fabrication of noncovalently cross-linked plastics with high mechanical strength. The design of in situ-formed tough nanofillers, which could deform and dissociate, endowed the noncovalently cross-linked hydrogels and elastomers with high toughness, excellent stretchability, elasticity, damage resistance, and damage tolerance. Benefiting from the well-designed in situ-formed nanofillers, these noncovalently cross-linked polymeric materials with enhanced mechanical strength still exhibited satisfactory healing, recycling, and reprocessing properties. Outlooks were provided to envision the remaining challenges to the further development and practical application of noncovalently cross-linked polymeric materials reinforced with in situ-formed nanofillers.
- 21 July 2022
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 38 (30) , 9050-9063
Noncovalently Cross-Linked Polymeric Materials Reinforced by Well-Designed In Situ-Formed Nanofillers
Noncovalently cross-linked polymeric materials generally exhibit lower mechanical robustness than traditional polymeric materials. Therefore, it is important to improve the mechanical properties of noncovalently cross-linked polymeric materials using an efficient and generalized approach. In this Perspective, we systematically summarized the recent development of noncovalently cross-linked polymeric materials reinforced by in situ-formed nanofillers. The synergy of high-density noncovalent interactions and in situ-formed rigid nanofillers provided an effective means for the fabrication of noncovalently cross-linked plastics with high mechanical strength. The design of in situ-formed tough nanofillers, which could deform and dissociate, endowed the noncovalently cross-linked hydrogels and elastomers with high toughness, excellent stretchability, elasticity, damage resistance, and damage tolerance. Benefiting from the well-designed in situ-formed nanofillers, these noncovalently cross-linked polymeric materials with enhanced mechanical strength still exhibited satisfactory healing, recycling, and reprocessing properties. Outlooks were provided to envision the remaining challenges to the further development and practical application of noncovalently cross-linked polymeric materials reinforced with in situ-formed nanofillers.
- 11 May 2022
- Published by American Chemical Society (ACS) in ACS Materials Letters
- Vol. 4 (6) , 1132-1138
Degradable, Recyclable, Water-Resistant, and Eco-Friendly Poly(vinyl alcohol)-Based Supramolecular Plastics
- 11 May 2022
- Published by American Chemical Society (ACS) in ACS Materials Letters
- Vol. 4 (6) , 1132-1138
Degradable, Recyclable, Water-Resistant, and Eco-Friendly Poly(vinyl alcohol)-Based Supramolecular Plastics