Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Atif Shahzad has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Nonlinear three-dimensional stability characteristics of geometrically imperfect nanoshells under axial compression and surface residual stress

    by Muhammad Atif Shahzad, Babak Safaei, Saeid Sahmani, Mohammed Salem Basingab, Abdul Zubar Hameed

    Through reduction of thickness value in nanostructures, the features of surface elasticity become more prominent due to having a high surface-to-volume ratio. The main aim of this research work was to examine the surface residual stress effect on the three-dimensional nonlinear stability characteristics of geometrically perfect and imperfect cylindrical shells at nanoscale under axial compression. To do so, an unconventional three-dimensional shell model was established via combination of the three-dimensional shell formulations and the Gurtin–Murdoch theory of elasticity. The silicon material is selected as a case study, which is the most utilized material in the design of micro-electromechanically systems. Then, the moving Kriging meshfree approach was applied to take numerically into account the surface free energy effects and the initial geometrical imperfection in the three-dimensional nonlinear stability curves. Accordingly, the considered cylindrical shell domain was discretized via a set of nodes together using the quadratic polynomial type of basis shape functions and an appropriate correlation function. It was found that the surface stress effects lead to an increase the critical axial buckling load of a perfect silicon nanoshell about 82.4 % 82.4 \% for the shell thickness of 2 nm 2{\rm{nm}} , about 32.4 % 32.4 \% for the shell thickness of 5 nm 5{\rm{nm}} , about 15.8 % 15.8 \% for the shell thickness of 10 nm 10{\rm{nm}} , and about 7.5 % 7.5 \% for the shell thickness of 20 nm 20{\rm{nm}} . These enhancements in the value of the critical axial buckling load for a geometrically imperfect silicon nanoshell become about 92.9 % 92.9 \% for the shell thickness of 2 nm 2{\rm{nm}} , about 36.5 % 36.5 \% for the shell thickness of 5 nm 5{\rm{nm}} , about 17.7 % 17.7 \% for the shell thickness of 10 nm 10{\rm{nm}} , and about 8.8 % 8.8 \% for the shell thickness of 20 nm 20{\rm{nm}} .


  • Open Access

    Sustainable Product Development Using FMEA ECQFD TRIZ and Fuzzy TOPSIS

    by Abdul Zubar Hameed, Jayakrishna Kandasamy, Sakthivel Aravind Raj, Majed Abubakr Baghdadi, Muhammad Atif Shahzad

    Increasing demand for simplification of frequently used products promotes innovation with simple mechanisms. In this study, an attempt is made by amalgamating FMEA, QFD, TRIZ, LCA, and fuzzy TOPSIS for the development of sustainable products. The methodology is executed to redesign a simple pressure relief valve (PRV) in an economic, sustainable, and innovative manner. The failure modes of PRV are considered in FMEA and ranked by their RPN. The environmental voice of the customer is imbibed in ECQFD to correlate with the engineering specifications and obtain the critical zones of improvement. Possible innovations of the existing design based on the design option selected from ECQFD are considered by analyzing the design feature contradictions, and solutions are addressed using the TRIZ matrix. Four CAD models of improved designs were created and subjected to sustainability analysis and fatigue life analysis. The redesigns were evaluated using fuzzy TOPSIS, an MCDM approach, to obtain an unbiased ranking based on multiple criteria supported by the result analysis and expert opinions. The final design was selected for prototyping. This approach provides a holistic approach for innovative product design and development and a simplified approach for an innovative redesign of an existing product.


  • Open Access

    3D Printing Parameter Optimization Using Taguchi Approach to Examine Acrylonitrile Styrene Acrylate (ASA) Mechanical Properties

    by Abdul Zubar Hameed, Sakthivel Aravind Raj, Jayakrishna Kandasamy, Muhammad Atif Shahzad, Majed Abubakr Baghdadi

    Polymer composites with different reinforcements have many applications. By adjusting process settings and adding fibers and fillers, composite properties can be improved. Additive manufacturing is popular in the polymer industry because it can manufacture intricately designed parts with fewer defects and greater strength with less material consumption. Composites use thermoplastics and thermosetting polymers. Thermoset plastics cannot be reused or recycled; therefore, they are disposed in landfills, creating pollution and environmental harm. In this work, thermoplastic ASA (Acrylonitrile Styrene Acrylate) polymer filament is used for FDM 3D printing. The specimens are made by varying five process parameters that affected the materials’ mechanical properties. The tensile, flexural and impact specimens are made using MINITAB software and ASTM requirements. The L18 orthogonal array experimental design, specimens and results were optimized. Infill density and layer height were most influential. Maximum tensile strength of 51.86 MPa, flexural strength of 82.56 MPa and impact strength of 0.180 J/mm2 were obtained by following the software-suggested input factors and compared with the predicted values. Final error percentage was obtained between the predicted and the experimental results and it was found to be under 3%, which is acceptable.


  • Open Access

    Chitosan: A Sustainable Material for Multifarious Applications

    by Abdul Zubar Hameed, Sakthivel Aravind Raj, Jayakrishna Kandasamy, Majed Abubakr Baghdadi, Muhammad Atif Shahzad

    Due to the versatility of its features and capabilities, chitosan generated from marine crustacean waste is gaining importance and appeal in a wide variety of applications. It was initially used in pharmaceutical and medical applications due to its antibacterial, biocompatible, and biodegradable properties. However, as the demand for innovative materials with environmentally benign properties has increased, the application range of chitosan has expanded, and it is now used in a variety of everyday applications. The most exciting aspect of the chitosan is its bactericidal properties against pathogens, which are prevalent in contaminated water and cause a variety of human ailments. Apart from antimicrobial and water filtration applications, chitosan is used in dentistry, in water filtration membranes to remove metal ions and some heavy metals from industrial effluents, in microbial fuel cell membranes, and in agriculture to maintain moisture in fruits and leaves. It is also used in skin care products and cosmetics as a moisturizer, in conjunction with fertilizer to boost plant immunity, and as a bi-adhesive for bonding woods and metals. As it has the capacity to increase the life span of food items and raw meat, it is an unavoidable component in food packing and preservation. The numerous applications of chitosan are reviewed in this brief study, as well as the approaches used to incorporate chitosan alongside traditional materials and its effect on the outputs.


  • Open Access

    A Multi-Attribute Decision-Making Model for the Selection of Polymer-Based Biomaterial for Orthopedic Industrial Applications

    by Ali Rizwan, Emad H. Abualsauod, Asem Majed Othman, Suhail H. Serbaya, Muhammad Atif Shahzad, Abdul Zubar Hameed

    The potential of quantifying the variations in IR active bands was explored while using the chemometric analysis of FTIR spectra for selecting orthopedic biomaterial of industrial scale i.e., ultra-high molecular weight PE (UHMWPE). The nano composites UHMWPE with multi-walled carbon nano-tubes (MWCNTs) and Mg-silicate were prepared and irradiated with 25 kGy and 50 kGy of gamma dose. Principal component analysis (PCA) revealed that first three principal components (PCs) are responsible for explaining the >99% of variance in FTIR data of UHMWPE on addition of fillers and/or irradiation. The factor loadings plots revealed that PC-1 was responsible for explaining the variance in polyethylene characteristics bands and the IR active region induced by fillers i.e., 440 cm−1, 456 cm−1, from 900–1200 cm−1, 1210 cm−1, 1596 cm−1, PC-2 was responsible for explaining the variance in spectra due to radiation-induced oxidation and cross linking, while the PC-3 is responsible for explaining the variance induced because of IR active bands of MWCNTs. Hierarchy cluster analysis (HCA) was employed to classify the samples into four clusters with respect to similarity in their IR active bands which is further confirmed by PCA. According to multi attribute analysis with PCA and HCA, 65 kGy irradiated sample is optimum choice from the existing alternatives in the group of irradiated pristine UHMWPE, UHMWPE/Mg-silicate irradiated with 25 kGy of gamma dose was the optimum choice for UHWMPE/Mg-silicate nano composites, and UHMWPE/γMWCNTs composites containing 1.0% dof γ MWCNTs for UHMWPE/MWCNTs nanocomposites, respectively. The results show the effectiveness of quantifying the variance for decision as far as optimization of biomaterials in orthopedic industrial applications is concerned.


  • Human-machine cooperation in planning and scheduling: a case study on an unstable environment

    by Zakaria Yahouni, Nasser Mebarki, Farouk Belkadi, Atif Shahzad, Alain Bernard

    In an industrial environment, manufacturing systems may be subject to considerable uncertainties which may lead to numerous schedule disturbances. These disturbances prevent the execution of the planned production schedule. 'groups of permutable jobs' is one of the most studied methods that deal with this drawback. It constructs a flexible solution characterised by a set of schedules, allowing a human operator to execute, in real-time, the schedule that best fits the state of the shop. However, because of the limited complexity that one human being can handle, he/she needs to cooperate with the machine in order to take efficient decisions. This paper focuses on investigating the human-machine cooperation for planning and scheduling. A new human-machine interface model assisted with a multi-indicator decision support system has been proposed and evaluated. The results show the usefulness/limits of the proposed model and provide insights into the practice of production planning and scheduling. [Received 27 October 2017; Revised 13 December 2017, 7 June 2018; Accepted 8 June 2018]


  • Open Access

    Learning Dispatching Rules for Scheduling: A Synergistic View Comprising Decision Trees, Tabu Search and Simulation

    by Atif Shahzad, Nasser Mebarki

    A promising approach for an effective shop scheduling that synergizes the benefits of the combinatorial optimization, supervised learning and discrete-event simulation is presented. Though dispatching rules are in widely used by shop scheduling practitioners, only ordinary performance rules are known; hence, dynamic generation of dispatching rules is desired to make them more effective in changing shop conditions. Meta-heuristics are able to perform quite well and carry more knowledge of the problem domain, however at the cost of prohibitive computational effort in real-time. The primary purpose of this research lies in an offline extraction of this domain knowledge using decision trees to generate simple if-then rules that subsequently act as dispatching rules for scheduling in an online manner. We used similarity index to identify parametric and structural similarity in problem instances in order to implicitly support the learning algorithm for effective rule generation and quality index for relative ranking of the dispatching decisions. Maximum lateness is used as the scheduling objective in a job shop scheduling environment.