Panyu Li
Panyu Li has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Chao Meng
School of Mechanical Engineering, Nanjing Institute of Technology, Nanjing 211167, Jiangsu, People’s Republic of China
3 shared publications - Fei Hao
School of Mechanical Engineering, Nanjing Institute of Technology, Nanjing, China
2 shared publications - Jinfei Shi
School of Mechanical Engineering, Southeast University, Nanjing 211189, China
2 shared publications - Fei Zheng
Xian Xiangteng Microelectronics Technology Co., Ltd.,Airborne Network Bus,Xian,China
1 shared publication - Sizhe Lang1 shared publication
Latest Publications
- 17 November 2023
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 35 (2) , 025205
Defect detection of glassivation passivation parts wafer surface with random texture and different brightness
Automatic defect detection for glassivation passivation parts (GPP) wafer surface becomes an extremely challenging task, due to the interference of random texture, disturbance of low-contrast pseudo defects within the image, and difference of different brightness between images. In this paper, we propose a novel defect detection scheme for GPP wafer surface with random texture and different brightness. First, an automatic segmentation method center expansion idea-based for the region of interest (ROI) of die image is presented to eliminate the interference from edge background and improve the efficiency of defect detection. Then, a feature point set extraction method based on adaptive gain and error diffusion is proposed so that the defect feature between images with different brightness can be highlighted by adaptive gain, and the candidate defect feature point set under random texture feature is able to be extracted by error diffusion. Finally, the density-based spatial clustering of applications with noise considering grayscale constraint (GC-DBSCAN) is designed to identify the true defect clusters from the candidate defect feature point set and accomplish the detection of various types of surface defects. Experimental results show that the proposed method can completely implement the extraction of crack and dirty defects and eliminate the false detection caused by random texture and different brightness, which is very efficient and superior to other methods.
- 17 November 2023
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 35 (2) , 025205
Defect detection of glassivation passivation parts wafer surface with random texture and different brightness
Automatic defect detection for glassivation passivation parts (GPP) wafer surface becomes an extremely challenging task, due to the interference of random texture, disturbance of low-contrast pseudo defects within the image, and difference of different brightness between images. In this paper, we propose a novel defect detection scheme for GPP wafer surface with random texture and different brightness. First, an automatic segmentation method center expansion idea-based for the region of interest (ROI) of die image is presented to eliminate the interference from edge background and improve the efficiency of defect detection. Then, a feature point set extraction method based on adaptive gain and error diffusion is proposed so that the defect feature between images with different brightness can be highlighted by adaptive gain, and the candidate defect feature point set under random texture feature is able to be extracted by error diffusion. Finally, the density-based spatial clustering of applications with noise considering grayscale constraint (GC-DBSCAN) is designed to identify the true defect clusters from the candidate defect feature point set and accomplish the detection of various types of surface defects. Experimental results show that the proposed method can completely implement the extraction of crack and dirty defects and eliminate the false detection caused by random texture and different brightness, which is very efficient and superior to other methods.
- 7 November 2023
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 35 (2) , 025013
A Gabor filter based weak crack detection method for glassivation passivation parts wafer
Crack defects on the surface of glassivation passivation parts (GPP) wafers are a significant factor leading to chip functional failure. Thus, efficient and stable surface defect detection is required to ensure product quality. However, existing detection methods do not handle weak crack defects on the wafer surface with an inhomogeneous texture background effectively. To overcome this challenge, we propose a weak crack defect detection method for GPP wafers with complex backgrounds. First, a weak crack feature enhancement method is proposed based on the Gabor filter with different orientations. Then, the crack candidates are generated using the least-squares method to transform the shape-based information into a line segment and direction independence judgment. Finally, a line segment clustering method is implemented for the final crack defect recognition. Experimental results demonstrate that the proposed defect detection method works effectively and robustly with inhomogeneous texture backgrounds and satisfies the requirement of a real-time detection system.
- 7 November 2023
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 35 (2) , 025013
A Gabor filter based weak crack detection method for glassivation passivation parts wafer
Crack defects on the surface of glassivation passivation parts (GPP) wafers are a significant factor leading to chip functional failure. Thus, efficient and stable surface defect detection is required to ensure product quality. However, existing detection methods do not handle weak crack defects on the wafer surface with an inhomogeneous texture background effectively. To overcome this challenge, we propose a weak crack defect detection method for GPP wafers with complex backgrounds. First, a weak crack feature enhancement method is proposed based on the Gabor filter with different orientations. Then, the crack candidates are generated using the least-squares method to transform the shape-based information into a line segment and direction independence judgment. Finally, a line segment clustering method is implemented for the final crack defect recognition. Experimental results demonstrate that the proposed defect detection method works effectively and robustly with inhomogeneous texture backgrounds and satisfies the requirement of a real-time detection system.
- 14 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 71 (00189456) , 1-15
Error Calibration Method Based on Perspective Mapping for Wafer Automatic Optical Inspection System
In the manufacturing process of the wafer, the positioning accuracy of the wafer automatic optical inspection (AOI) system affects the detection of die surface defect directly. Most existing error compensation methods generally analyze specific error or main sources of error and can improve the positioning accuracy in most of the applications. However, to fulfill the requirement of higher positioning accuracy of the wafer AOI system, in this article, we propose an error calibration method based on perspective mapping (ECM-PM), which only requires to focus on the total error of the system, regardless of the multiple error sources of the system. First, the error cause of the wafer AOI system is analyzed and the total error of the system is measured using the designed high-precision glass checkerboard calibration board. Then, the mapping model between motor coordinate system and checkerboard coordinate system is established. In addition, the total error of the system is calibrated based on the perspective mapping principle. Finally, the experimental results show that the proposed method obviously decreased the total error of the system and it is robust to the parameter of different recipe motor coordinates.
- 14 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 71 (00189456) , 1-15
Error Calibration Method Based on Perspective Mapping for Wafer Automatic Optical Inspection System
In the manufacturing process of the wafer, the positioning accuracy of the wafer automatic optical inspection (AOI) system affects the detection of die surface defect directly. Most existing error compensation methods generally analyze specific error or main sources of error and can improve the positioning accuracy in most of the applications. However, to fulfill the requirement of higher positioning accuracy of the wafer AOI system, in this article, we propose an error calibration method based on perspective mapping (ECM-PM), which only requires to focus on the total error of the system, regardless of the multiple error sources of the system. First, the error cause of the wafer AOI system is analyzed and the total error of the system is measured using the designed high-precision glass checkerboard calibration board. Then, the mapping model between motor coordinate system and checkerboard coordinate system is established. In addition, the total error of the system is calibrated based on the perspective mapping principle. Finally, the experimental results show that the proposed method obviously decreased the total error of the system and it is robust to the parameter of different recipe motor coordinates.