JLJinfeng Liu

Jinfeng Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jinfeng Liu has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Study on the Optimal Design of a Shark-like Shape AUV Based on the CFD Method

    by Yu Lu, Jianping Yuan, Qiaorui Si, Peifeng Ji, Ding Tian, Jinfeng Liu

    In previous AUV designs, the thrusters were often placed outside the vehicle, resulting in their performance being significantly influenced by the shape of the vehicle. Additionally, this placement also leads to the generation of strong radiated noise that propagates in all directions, making noise reduction challenging. Taking inspiration from the shape of sharks, this paper proposes a slender, shark-inspired AUV. The model features a continuous passageway in the middle where a pump-jet thruster is installed to provide propulsion. The walls of the passageway are then covered with sound-absorbing materials to reduce radiated noise. To address the problem of low design efficiency caused by multiple design parameters, a multi-objective optimization method is proposed to optimize the shape of the AUV. The performance targets of speed, displacement, and energy consumption are determined as objective functions, and a multi-island genetic algorithm is used as the optimization algorithm to build the multi-objective optimization process. An automated optimization platform was then developed which integrates parametric modeling, mesh partitioning, the CFD calculation, and the optimized design. To enhance the efficiency of optimization, a surrogate model was developed to approximate the CFD calculation. Using the optimal Latin hypercube method, experimental factors were designed, and a surrogate model was constructed based on the radial basis function approach. Following optimization, the resistance was reduced by 9.1%, while the displacement volume was increased by 10.7% and energy consumption was decreased by 6.3%. By analyzing the velocity and entropy production distribution of the AUV, the effectiveness of the optimization method was verified.


  • Open Access

    Simulation Analysis of Power Consumption and Mixing Time of Pseudoplastic Non-Newtonian Fluids with a Propeller Agitator

    by Shiji Wang, Peng Wang, Jianping Yuan, Jinfeng Liu, Qiaorui Si, Dun Li

    In order to study the effect of a high twist rate propeller on the flow field characteristics of pseudoplastic non-Newtonian fluids, the numerical simulation method was used to analyze the mixing flow field of pseudoplastic non-Newtonian fluids at different concentrations in this paper. By changing the rotational speed and the blade installation height, the vorticity, turbulent energy, mixing power consumption, mixing time and mixing energy of the flow field were analyzed. By analyzing and comparing the research results, it was found that increasing the mixing propeller speed can effectively improve the mixing effect. Single-layer arrangement of mixing propeller is not suitable to be placed close to the bottom of the tank, and the mixing of the upper flow field is weaker. Under the same conditions, when the viscosity of pseudoplastic non-Newtonian fluid is increased, the high vorticity and high turbulence energy area is reduced to the mixing propeller area, and the time required for mixing 1.25% CMC solution is 246 times longer than that for mixing 0.62% CMC solution and the required mixing energy also increases sharply. The accuracy of the numerical simulation was verified by experiments. Considering the mixing effect and the mixing power consumption, the single-layer arrangement propeller is more suitable for mixing pseudoplastic non-Newtonian fluids with mass fraction of 0.62% CMC or below. This study can provide a reference for the practical application of propeller mixers to mix pseudoplastic non-Newtonian fluids.


  • Open Access

    Investigation into the Hydrodynamic Noise Characteristics of Electric Ducted Propeller

    by Mengfei Chen, Jinfeng Liu, Qiaorui Si, Yun Liang, Zhongkun Jin, Jianping Yuan

    Ducted propeller is a kind of special propeller widely used in unmanned underwater vehicles, its flow characteristics and hydrodynamic noise are very important for marine environmental protection and equipment concealment. The hybrid techniques based on the acoustic analogy theory are adopted in the present study to calculate the unsteady flow field and sound field characteristics of a ducted propeller. The full scale flow filed and hydro-acoustic sources of the propulsion system are simulated by Detached-Eddy computational fluid dynamics (CFD) method. Hydrodynamic noise are calculated by FWH equation based on the CFD results. The frequency domain and directivity of sound pressure level at different sound field monitoring points are analyzed at four navigational speeds. The results show that the navigational speed that is in the inflow condition of the ducted propeller play important roles in the flow structure and underwater radiated noise. Under the fixed impeller rotational speed, the propulsion efficiency of ducted propeller increases first and then decreases with the raise of navigational speed. The maximum errors of thrust and power between simulation and experiment values are 0.5% and 0.1% respectively, which means that the adopted DES numerical simulation method has high credibility in calculating the acoustic source. At impeller rotational speed of 2000 r/min, the best state of flow field distribution is at the navigational speed of 1.54 m/s, which is corresponding to the highest propulsion efficiency condition. The propeller noise presents dipole characteristic in all working conditions, and at the obvious blade passing frequency, multiple characteristics are presented; most of the noise contribution is also concentrated below four times of the blade passing frequency. The total sound pressure level of the hydrodynamic noise is the smallest at the optimal efficiency condition (the navigational speed is 1.54 m/s). At high navigational speed, the low frequency characteristics below blade passing frequency increase and the amplitude becomes larger. This indicates that the component of turbulent noise becomes more important with the increase of navigational speed. The research focuses on analyzing the relationship between the energy loss of the ducted propeller wake field and the noise level, and it is found that the vortex at the tail makes a certain contribution to the noise. The research conclusions could provide some reference for the acoustic performance evaluation and noise reduction optimization of ducted propeller design as well as the improvement of UUV stealth performance.