Xin-Hao Ding
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Xin-Hao Ding has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Jian-Xin Chen
Nantong University
17 shared publications - Wen-Wen Yang
School of Information Science and Technology, Nantong University, Nan Tong, China
15 shared publications - Jun-Yao Yang
School of Information Science and Technology, Nantong University, Nantong, China
7 shared publications - Tian-Yu Yan
School of Information Science and Technology, Nantong University, Nantong, China
5 shared publications - Lei Guo
Dalian University of Technology
4 shared publications - Wei Qin
School of Information Science and Technology, Nantong University, Nantong, China
4 shared publications
Latest Publications
- Open Access
- 23 July 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
A MW/MMW shared-aperture antenna supporting two-dimension beam steering in MMW band
- 23 July 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessA MW/MMW shared-aperture antenna supporting two-dimension beam steering in MMW band
- 15 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. PP (15361225) , 1-5
Wideband Four-Element MIMO Antenna System for 5G Mobile Terminals using Radiator-Sharing Technology
This letter proposes a wideband four-element multiple-input multiple-output (MIMO) antenna system designed for direct integration onto mobile terminal back covers. The design includes four main radiation patches (MP), four parasitic patches (PP) and a center patch. Between two adjacent MPs lies a PP, and through radiator-sharing technology, a single PP can serve both adjacent MPs simultaneously. One MP generates two modes: TM10 and TM01, and a slot is introduced to control the TM10 mode. The two PPs adjacent to the MP produce two additional modes, respectively. Two metallized vias are added to the PP to adjust impedance matching, merging the four modes into a wideband four-mode operation. Finally, the central grounding patch further enhances impedance matching of elements.
- 15 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. PP (15361225) , 1-5
Wideband Four-Element MIMO Antenna System for 5G Mobile Terminals using Radiator-Sharing Technology
This letter proposes a wideband four-element multiple-input multiple-output (MIMO) antenna system designed for direct integration onto mobile terminal back covers. The design includes four main radiation patches (MP), four parasitic patches (PP) and a center patch. Between two adjacent MPs lies a PP, and through radiator-sharing technology, a single PP can serve both adjacent MPs simultaneously. One MP generates two modes: TM10 and TM01, and a slot is introduced to control the TM10 mode. The two PPs adjacent to the MP produce two additional modes, respectively. Two metallized vias are added to the PP to adjust impedance matching, merging the four modes into a wideband four-mode operation. Finally, the central grounding patch further enhances impedance matching of elements.
- 11 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (7) , 7160-7165
Shared-Aperture Wideband Endfire/Broadside Dielectric Resonator Antenna for 5G Millimeter-Wave Terminal
In this communication, a shared-aperture wideband end-fire/broadside millimeter-wave (MMW) phased array is proposed. The antenna consists of a 1×4 end-fire substrate-integrated dielectric resonator antenna (SIDRA) array and a 1×5 broadside SIDRA array. The broadside antenna and the end-fire antenna are constructed on a single substrate and share the same volume. The gaps formed between adjacent metallized grooves for the broadside cavity constitute the parallel-groove, which is employed for the end-fire antenna. Therefore, the space is effectively utilized, and the structure isolates the broadside and end-fire antennas. As a result, the two SIDRA arrays maintain strong independence, allowing for independent design. The end-fire SIDRA employs multi-mode wideband technology, utilizing groove slot mode (generated by the parallel-groove groove slot), slot mode (generated by the coupling slot), and DRA mode. The broadside SIDRA incorporates a metal patch along with four non-metalized elements to achieve frequency lowering and enhance impedance matching. The two arrays achieve the overlapped bandwidth covering 23.5 to 29.5 GHz, fully encompassing 5G n257 and n258 bands. Furthermore, the beam scanning range reaches ±45° for both end-fire and broadside operations. The peak gains are 9.9 dBi (end-fire) and 12.1 dBi (broadside), realized by the 1×4 end-fire MMW array and the 1×4 broadside MMW sub-array, respectively. Considering its wide bandwidth and high integration, the proposed design is highly suitable for future terminal applications.
- 11 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (7) , 7160-7165
Shared-Aperture Wideband Endfire/Broadside Dielectric Resonator Antenna for 5G Millimeter-Wave Terminal
In this communication, a shared-aperture wideband end-fire/broadside millimeter-wave (MMW) phased array is proposed. The antenna consists of a 1×4 end-fire substrate-integrated dielectric resonator antenna (SIDRA) array and a 1×5 broadside SIDRA array. The broadside antenna and the end-fire antenna are constructed on a single substrate and share the same volume. The gaps formed between adjacent metallized grooves for the broadside cavity constitute the parallel-groove, which is employed for the end-fire antenna. Therefore, the space is effectively utilized, and the structure isolates the broadside and end-fire antennas. As a result, the two SIDRA arrays maintain strong independence, allowing for independent design. The end-fire SIDRA employs multi-mode wideband technology, utilizing groove slot mode (generated by the parallel-groove groove slot), slot mode (generated by the coupling slot), and DRA mode. The broadside SIDRA incorporates a metal patch along with four non-metalized elements to achieve frequency lowering and enhance impedance matching. The two arrays achieve the overlapped bandwidth covering 23.5 to 29.5 GHz, fully encompassing 5G n257 and n258 bands. Furthermore, the beam scanning range reaches ±45° for both end-fire and broadside operations. The peak gains are 9.9 dBi (end-fire) and 12.1 dBi (broadside), realized by the 1×4 end-fire MMW array and the 1×4 broadside MMW sub-array, respectively. Considering its wide bandwidth and high integration, the proposed design is highly suitable for future terminal applications.
- Open Access
Wideband MIMO Antenna System Employing Slot and Via Loading Technique for 5G Terminals
This work introduces a wideband four-element multiple-input multiple-output (MIMO) antenna system with four rectangular patches arranged in a sequentially rotated configuration. Wideband frequency operation is realized by exploiting the TM10, TM01 and TM11δ modes through the utilization of a slot and metallized vias in the patch design. Another group of metallized vias are used to control coupling between the antenna elements, achieving an isolation level of over 17 dB. A prototype is fabricated and measured, demonstrating −6 dB impedance bandwidth ranging from 4.23 GHz to 5.96 GHz, enabling coverage of the N79 (4.4–5 GHz), V2X (5.905–5.925 GHz) and Wi-Fi 5/6 (5.150–5.850 GHz) frequency bands. The MIMO antenna features an efficiency of over 45% and a low envelope correlation coefficient (ECC) lower than 0.25. Owing to its broad bandwidth, compact geometry, and good isolation, the proposed MIMO antenna provides an efficient and practical solution for 5G MIMO applications integrated within mobile terminal back covers.
Open AccessWideband MIMO Antenna System Employing Slot and Via Loading Technique for 5G Terminals
This work introduces a wideband four-element multiple-input multiple-output (MIMO) antenna system with four rectangular patches arranged in a sequentially rotated configuration. Wideband frequency operation is realized by exploiting the TM10, TM01 and TM11δ modes through the utilization of a slot and metallized vias in the patch design. Another group of metallized vias are used to control coupling between the antenna elements, achieving an isolation level of over 17 dB. A prototype is fabricated and measured, demonstrating −6 dB impedance bandwidth ranging from 4.23 GHz to 5.96 GHz, enabling coverage of the N79 (4.4–5 GHz), V2X (5.905–5.925 GHz) and Wi-Fi 5/6 (5.150–5.850 GHz) frequency bands. The MIMO antenna features an efficiency of over 45% and a low envelope correlation coefficient (ECC) lower than 0.25. Owing to its broad bandwidth, compact geometry, and good isolation, the proposed MIMO antenna provides an efficient and practical solution for 5G MIMO applications integrated within mobile terminal back covers.
- 31 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (11) , 9607-9612
Low-Profile Dual-Band Dual-Polarized Coplanar Shared-Aperture Antenna Using Perforated Metasurface for 5G (4.9, 26 GHz) Mobile Terminals
The shared-aperture antenna is considered an attractive high-integration solution to support the cooperative work of sub-6 GHz and millimeter-wave (mmW) frequency bands. Current share-aperture designs, however, face challenges in simultaneously realizing dual polarization, low-profile, and mmW beam-scanning arrays. In this communication, to deal with this issue, a dual-polarized coplanar shared-aperture antenna integrating sub-6 GHz metasurface (MTS) and mmW magneto-electric (ME) dipole for 5G (4.9, 26 GHz) wireless terminals is proposed. By leveraging the sub-wavelength characteristics of MTS unit cells, each cell integrates an embedded ME-dipole element. Meanwhile, the MTS unit cells are perforated for the miniaturization of the sub-6 GHz antenna while accommodating the 4 × 4 mmW ME-dipole array. Therefore, both the sub-6 GHz MTS and the mmW ME-dipole share the same aperture and profile, resulting in a very compact size of 0.46 × 0.46 × 0.028 λL3 (λL is the wavelength in free space at 4.9 GHz). The open-loop resonator (OLR) structure is introduced to the metasurface for decoupling between the MTS cell and the ME-dipole in the mmW band. For validation, an antenna prototype is fabricated and tested.
- 31 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (11) , 9607-9612
Low-Profile Dual-Band Dual-Polarized Coplanar Shared-Aperture Antenna Using Perforated Metasurface for 5G (4.9, 26 GHz) Mobile Terminals
The shared-aperture antenna is considered an attractive high-integration solution to support the cooperative work of sub-6 GHz and millimeter-wave (mmW) frequency bands. Current share-aperture designs, however, face challenges in simultaneously realizing dual polarization, low-profile, and mmW beam-scanning arrays. In this communication, to deal with this issue, a dual-polarized coplanar shared-aperture antenna integrating sub-6 GHz metasurface (MTS) and mmW magneto-electric (ME) dipole for 5G (4.9, 26 GHz) wireless terminals is proposed. By leveraging the sub-wavelength characteristics of MTS unit cells, each cell integrates an embedded ME-dipole element. Meanwhile, the MTS unit cells are perforated for the miniaturization of the sub-6 GHz antenna while accommodating the 4 × 4 mmW ME-dipole array. Therefore, both the sub-6 GHz MTS and the mmW ME-dipole share the same aperture and profile, resulting in a very compact size of 0.46 × 0.46 × 0.028 λL3 (λL is the wavelength in free space at 4.9 GHz). The open-loop resonator (OLR) structure is introduced to the metasurface for decoupling between the MTS cell and the ME-dipole in the mmW band. For validation, an antenna prototype is fabricated and tested.
- 22 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (8) , 2697-2701
A Circularly Polarized Multibeam Transmitarray Antenna for Millimeter-Wave Applications
In this paper, a millimeter-wave (mm-W) circularly polarized (CP) multi-beam transmitarray antenna (TA) is proposed. The proposed multi-beam antenna (MBA) comprises a TA composed of multiple three-layer slotted metal receiver-transmitter (RT) unit cells, along with a set of CP planar source antennas fed by substrate integrated waveguide (SIW) transmission lines. By rotating the periodically arranged transmitting patches, 360° transmission phase compensation is achieved without changing the transmission amplitude. The source antennas include five SIW-fed metasurface-based radiators. A prototype with 15 × 15 unit cells was modeled, fabricated, assembled, and tested. Consistent with the theoretical estimation, the beam coverage range reached ±30°. The test results show that the proposed MBA has a peak broadside gain of 21.1 dBi and a scanning loss of 2.9 dB. Its 3 dB gain bandwidth is approximately 16.7%, and the 3 dB axial ratio (AR) bandwidth is approximately 19.4%. The proposed MBA has the strengths of low cost, easy fabrication, wide beam coverage range and low scan loss, and can be a great option for mm-W applications.
- 22 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (8) , 2697-2701
A Circularly Polarized Multibeam Transmitarray Antenna for Millimeter-Wave Applications
In this paper, a millimeter-wave (mm-W) circularly polarized (CP) multi-beam transmitarray antenna (TA) is proposed. The proposed multi-beam antenna (MBA) comprises a TA composed of multiple three-layer slotted metal receiver-transmitter (RT) unit cells, along with a set of CP planar source antennas fed by substrate integrated waveguide (SIW) transmission lines. By rotating the periodically arranged transmitting patches, 360° transmission phase compensation is achieved without changing the transmission amplitude. The source antennas include five SIW-fed metasurface-based radiators. A prototype with 15 × 15 unit cells was modeled, fabricated, assembled, and tested. Consistent with the theoretical estimation, the beam coverage range reached ±30°. The test results show that the proposed MBA has a peak broadside gain of 21.1 dBi and a scanning loss of 2.9 dB. Its 3 dB gain bandwidth is approximately 16.7%, and the 3 dB axial ratio (AR) bandwidth is approximately 19.4%. The proposed MBA has the strengths of low cost, easy fabrication, wide beam coverage range and low scan loss, and can be a great option for mm-W applications.
- 27 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (5) , 1288-1292
A Compact Dual-Polarized Endfire Dielectric Resonator Antenna for 5G Millimeter-Wave Terminal
Current millimeter-wave (mm-Wave) endfire dielectric resonator antennas (DRAs) are limited to single polarization, highlighting the need for dual-polarized operation to fully leverage DRA advantages. Thus, in this letter, a compact dual-polarized endfire DRA array was proposed, and printed circuit board technology is used for high integration. The antenna element is initially designed to incorporate two orthogonal dielectric resonator antenna (DRA) modes, corresponding to vertical polarization (VP) and horizontal polarization (HP) for operation. Furthermore, to enhance the bandwidth of both polarizations, the corresponding cavity mode and slot mode are introduced, which are combined with the corresponding DRA mode for wideband work. VP and HP elements share the same structure, showing a compact size. Based on the element, a four-element array is designed and fabricated. The test results show that an overlapping bandwidth of 24.1-29.6 GHz is realized. Besides, a peak gain of 10.3 and 9.8 dBi for VP and HP is achieved, respectively. Moreover, both VP and HP polarization enable beam scanning. From the above observed characteristics, it can be seen that the proposed design is promising for future 5G mm-Wave terminal applications.
- 27 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (5) , 1288-1292
A Compact Dual-Polarized Endfire Dielectric Resonator Antenna for 5G Millimeter-Wave Terminal
Current millimeter-wave (mm-Wave) endfire dielectric resonator antennas (DRAs) are limited to single polarization, highlighting the need for dual-polarized operation to fully leverage DRA advantages. Thus, in this letter, a compact dual-polarized endfire DRA array was proposed, and printed circuit board technology is used for high integration. The antenna element is initially designed to incorporate two orthogonal dielectric resonator antenna (DRA) modes, corresponding to vertical polarization (VP) and horizontal polarization (HP) for operation. Furthermore, to enhance the bandwidth of both polarizations, the corresponding cavity mode and slot mode are introduced, which are combined with the corresponding DRA mode for wideband work. VP and HP elements share the same structure, showing a compact size. Based on the element, a four-element array is designed and fabricated. The test results show that an overlapping bandwidth of 24.1-29.6 GHz is realized. Besides, a peak gain of 10.3 and 9.8 dBi for VP and HP is achieved, respectively. Moreover, both VP and HP polarization enable beam scanning. From the above observed characteristics, it can be seen that the proposed design is promising for future 5G mm-Wave terminal applications.
- 18 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (4) , 878-882
High-Gain 60 GHz High-Order-Mode Patch Antenna Array Based on Single-Layer Ridge Gap Waveguide
In this letter, a high-gain high-order mode patch antenna array based on a single-layer ridge gap waveguide (RGW) is proposed for 60-GHz applications. The antenna consists of a substrate printed with patches and a single-layer RGW feeding structure. For the patch element, the modified TM30 mode is utilized as the radiation mode. The increased patch sizes and inter-element spacing not only contribute to a high gain but also provide an enlarged area for the design of the single-layer RGW network. As a result, this leads to lower complexity in the feeding network and potentially decreases the fabrication tolerance and cost. Finally, an 8×8 high-order mode patch array prototype is fabricated and tested. The measured results illustrate that the -10 dB bandwidth is 14.9%, covering from 56.5 GHz to 65.6 GHz. The measured gain within the operating band is higher than 29.3 dBi and the peak gain achieves 30.1 dBi. Meanwhile, the array obtains a high aperture efficiency of better than 71%.
- 18 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (4) , 878-882
High-Gain 60 GHz High-Order-Mode Patch Antenna Array Based on Single-Layer Ridge Gap Waveguide
In this letter, a high-gain high-order mode patch antenna array based on a single-layer ridge gap waveguide (RGW) is proposed for 60-GHz applications. The antenna consists of a substrate printed with patches and a single-layer RGW feeding structure. For the patch element, the modified TM30 mode is utilized as the radiation mode. The increased patch sizes and inter-element spacing not only contribute to a high gain but also provide an enlarged area for the design of the single-layer RGW network. As a result, this leads to lower complexity in the feeding network and potentially decreases the fabrication tolerance and cost. Finally, an 8×8 high-order mode patch array prototype is fabricated and tested. The measured results illustrate that the -10 dB bandwidth is 14.9%, covering from 56.5 GHz to 65.6 GHz. The measured gain within the operating band is higher than 29.3 dBi and the peak gain achieves 30.1 dBi. Meanwhile, the array obtains a high aperture efficiency of better than 71%.
- 12 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (12) , 4253-4257
A Compact Microwave/Millimeter-Wave Shared-Aperture Antenna With Wideband Millimeter-Wave Beam-Steering Ability
In this letter, a compact microwave (MW) /millimeter-wave (MMW) shared-aperture antenna with wideband millimeter-wave beam-steering ability is proposed. For shared-aperture antenna, suitable substrate thickness for MW antenna is high for MMW antenna. The design concept is to provide better performance for the MMW antenna by using the high substrate thickness. Thus, the magnetoelectric (ME) dipole antenna is used as MMW antenna, due to its characteristics of high profile and wide bandwidth. The perforated patch antenna is used as MW antenna, and the 2×4 MMW ME dipole beam-steering array is embedded into the MW perforated patch. Meanwhile, the MW patch improves the impedance matching of the MMW antenna. The shared-aperture antenna obtains an extremely structure of 0.32×0.27×0.019λ 3 01 (λ 01 is the wavelength in the vacuum at 3.5 GHz). A validation model has been constructed and tested, demonstrating its capability to operate across two frequency bands: 3.4-3.61 GHz (6.1%) and 22.6-29.6 GHz (26.8%). The MW antenna achieves peak gains of 6.1 dBi, while the MMW array achieves peak gains of 15.2 dBi. Additionally, the MMW array enables ±40° beam scanning in H-plane.
- 12 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (12) , 4253-4257
A Compact Microwave/Millimeter-Wave Shared-Aperture Antenna With Wideband Millimeter-Wave Beam-Steering Ability
In this letter, a compact microwave (MW) /millimeter-wave (MMW) shared-aperture antenna with wideband millimeter-wave beam-steering ability is proposed. For shared-aperture antenna, suitable substrate thickness for MW antenna is high for MMW antenna. The design concept is to provide better performance for the MMW antenna by using the high substrate thickness. Thus, the magnetoelectric (ME) dipole antenna is used as MMW antenna, due to its characteristics of high profile and wide bandwidth. The perforated patch antenna is used as MW antenna, and the 2×4 MMW ME dipole beam-steering array is embedded into the MW perforated patch. Meanwhile, the MW patch improves the impedance matching of the MMW antenna. The shared-aperture antenna obtains an extremely structure of 0.32×0.27×0.019λ 3 01 (λ 01 is the wavelength in the vacuum at 3.5 GHz). A validation model has been constructed and tested, demonstrating its capability to operate across two frequency bands: 3.4-3.61 GHz (6.1%) and 22.6-29.6 GHz (26.8%). The MW antenna achieves peak gains of 6.1 dBi, while the MMW array achieves peak gains of 15.2 dBi. Additionally, the MMW array enables ±40° beam scanning in H-plane.
- 31 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (9) , 7377-7382
A Microwave/Millimeter-Wave Shared-Aperture Filtering Antenna With Reused via Structure
A microwave (MW) and millimeter wave (MMW) shared-aperture filtering antenna with reused via structure for 5G application is proposed in this article. The antenna is composed of a 3.5 GHz filtering patch antenna and a 28 GHz substrate-integrated filtering cavity antenna (SIFCA) array. The shorting via structure of the patch antenna, which designed to generate a lower-edge radiation null in the MW band, is repurposed as metallized grooves for 28 GHz cavity antenna array radiation in the MMW band. Then, two parasitic patches are applied to produce an upper-edge radiation null at the MW band. For the 28 GHz SIFCA element, a stub-loaded microstrip feed line is employed to generate a controllable radiation null. Moreover, for the extension of MMW antenna array, two additional SIFCA elements are further inserted. The antenna array extension is realized as a 1×2 patch array for MIMO system and a 1×12 SIFCA array for high-gain and beam-steering applications. A dual-band antenna array prototype for validation is fabricated and tested. The measured results demonstrate a reasonable agreement with the simulated ones.
- 31 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (9) , 7377-7382
A Microwave/Millimeter-Wave Shared-Aperture Filtering Antenna With Reused via Structure
A microwave (MW) and millimeter wave (MMW) shared-aperture filtering antenna with reused via structure for 5G application is proposed in this article. The antenna is composed of a 3.5 GHz filtering patch antenna and a 28 GHz substrate-integrated filtering cavity antenna (SIFCA) array. The shorting via structure of the patch antenna, which designed to generate a lower-edge radiation null in the MW band, is repurposed as metallized grooves for 28 GHz cavity antenna array radiation in the MMW band. Then, two parasitic patches are applied to produce an upper-edge radiation null at the MW band. For the 28 GHz SIFCA element, a stub-loaded microstrip feed line is employed to generate a controllable radiation null. Moreover, for the extension of MMW antenna array, two additional SIFCA elements are further inserted. The antenna array extension is realized as a 1×2 patch array for MIMO system and a 1×12 SIFCA array for high-gain and beam-steering applications. A dual-band antenna array prototype for validation is fabricated and tested. The measured results demonstrate a reasonable agreement with the simulated ones.