Ana Maria Grămescu
Ana Maria Grămescu has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Mihaela Pericleanu
Faculty of Civil Engineering, Ovidius University of Constanța, 900527 Constanța, Romania
6 shared publications - Bucur Dan Pericleanu
Faculty of Civil Engineering, Ovidius University of Constanța, 900527 Constanța, Romania
4 shared publications Tudorel Șeitan
Ovidius University of Constanta , Institute of Doctoral Studies , Bd. Mamaia nr. 124, 900356- Constanta , Romania
3 shared publicationsAna Grămescu
2 shared publications- Corina Elena Anghelescu
PhD, Ovidius University of Constanta , Faculty of Civil Engineering , Bd. Mamaia nr. 124, 900356 , Constanta , Romania
2 shared publications - Delia-Ioana Andrieș
PhD, Ovidius University of Constanta , Institute of Doctoral Studies , Bd. Mamaia nr. 124, 900356- Constanta , Romania
2 shared publications
Latest Publications
- Open Access
- 30 May 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (11) , 6176
Material and Structural Characterization of Historical Masonry: Analytical Framework for Restoration Planning: A Case Study
Historic monument buildings represent, in a three-dimensional form, the expression of civilization, culture, and progress across various historical periods. Restauration works on such structure must achieve a performance level that preserves the value expression of parameters associated with criteria derived from both the historical substance and the requirements for strength and stability. National and international regulations (such as UNESCO conventions) play an essential role in heritage consolidation. These frameworks set standards for conservation practices and promote the importance of protecting historic heritage, which is an expression of cultural identity and community history. The research findings presented in the paper refer to a case study, Costache Conachi Manor, a building classified as a historic monument, located in Galați County, Romania. The investigations concern the processes and methods used to identify the current condition of the building, which includes the structural aspect and the materials used, in order to ensure compatible restoration works while respecting and enhancing originality. Overall, these advanced research techniques not only help to accurately characterize the materials used in the historic Costache Conachi Manor masonry structure but also play a vital role in developing knowledge of restoration and conservation practices.
- 30 May 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (11) , 6176
Open AccessMaterial and Structural Characterization of Historical Masonry: Analytical Framework for Restoration Planning: A Case Study
Historic monument buildings represent, in a three-dimensional form, the expression of civilization, culture, and progress across various historical periods. Restauration works on such structure must achieve a performance level that preserves the value expression of parameters associated with criteria derived from both the historical substance and the requirements for strength and stability. National and international regulations (such as UNESCO conventions) play an essential role in heritage consolidation. These frameworks set standards for conservation practices and promote the importance of protecting historic heritage, which is an expression of cultural identity and community history. The research findings presented in the paper refer to a case study, Costache Conachi Manor, a building classified as a historic monument, located in Galați County, Romania. The investigations concern the processes and methods used to identify the current condition of the building, which includes the structural aspect and the materials used, in order to ensure compatible restoration works while respecting and enhancing originality. Overall, these advanced research techniques not only help to accurately characterize the materials used in the historic Costache Conachi Manor masonry structure but also play a vital role in developing knowledge of restoration and conservation practices.
- Open Access
- 1 December 2024
- Published by Walter de Gruyter GmbH in Ovidius University Annals of Constanta - Series Civil Engineering
- Vol. 26 (1) , 35-44
Methods for strengthening the ground and infrastructure of historical monument constructions
In this paper, the authors present research conducted through case studies on historical monument constructions situated on challenging foundation soils, where the foundation structure has also been affected. The constructions in question are historical monument buildings, typically over 100 years old. The destructive factors causing foundation degradation and affecting the soil’s resistance parameters are mainly leaks from water networks but also include certain intervention works carried out in the immediate vicinity of the monument. The resulting differential settlements motivated in-depth geotechnical studies as well as measures for soil stabilization and infrastructure reinforcement. The results of the research have supported the intervention works adopted by the authors, many of these case studies having also been executed to date. In this context, the article presents highly valuable material for specialists in adopting intervention measures for infrastructure reinforcement.
- 1 December 2024
- Published by Walter de Gruyter GmbH in Ovidius University Annals of Constanta - Series Civil Engineering
- Vol. 26 (1) , 35-44
Open AccessMethods for strengthening the ground and infrastructure of historical monument constructions
In this paper, the authors present research conducted through case studies on historical monument constructions situated on challenging foundation soils, where the foundation structure has also been affected. The constructions in question are historical monument buildings, typically over 100 years old. The destructive factors causing foundation degradation and affecting the soil’s resistance parameters are mainly leaks from water networks but also include certain intervention works carried out in the immediate vicinity of the monument. The resulting differential settlements motivated in-depth geotechnical studies as well as measures for soil stabilization and infrastructure reinforcement. The results of the research have supported the intervention works adopted by the authors, many of these case studies having also been executed to date. In this context, the article presents highly valuable material for specialists in adopting intervention measures for infrastructure reinforcement.
- Open Access
- 1 December 2024
- Published by Walter de Gruyter GmbH in Ovidius University Annals of Constanta - Series Civil Engineering
- Vol. 26 (1) , 28-34
Replacing scale models of engineering structures with the adoption and use of models defined with digital tools
It is most likely that at the beginning of the 21st century, with the 4th industrial revolution, we will find ourselves at the borderline between technique and technology. The question underlying this article is whether the technological advance that the construction industry presents today can lead to the full replacement of the technique in the testing laboratories. Decisions on structural systems extracted from these laboratory-made physical models were often accurate, but the cost and time involved made the validation method low-yield. Today, through digitalization, all structural concepts can be directly realized in 3D with software specially designed for the AEC (Architecture, Engineering & Construction) industry. Models made in this way can be developed down to the smallest detail, can be calculated and dimensioned from a structural point of view under different assumptions, and then can be georeferenced and managed from the point of view of assets.
- 1 December 2024
- Published by Walter de Gruyter GmbH in Ovidius University Annals of Constanta - Series Civil Engineering
- Vol. 26 (1) , 28-34
Open AccessReplacing scale models of engineering structures with the adoption and use of models defined with digital tools
It is most likely that at the beginning of the 21st century, with the 4th industrial revolution, we will find ourselves at the borderline between technique and technology. The question underlying this article is whether the technological advance that the construction industry presents today can lead to the full replacement of the technique in the testing laboratories. Decisions on structural systems extracted from these laboratory-made physical models were often accurate, but the cost and time involved made the validation method low-yield. Today, through digitalization, all structural concepts can be directly realized in 3D with software specially designed for the AEC (Architecture, Engineering & Construction) industry. Models made in this way can be developed down to the smallest detail, can be calculated and dimensioned from a structural point of view under different assumptions, and then can be georeferenced and managed from the point of view of assets.
- Open Access
- 1 December 2024
- Published by Walter de Gruyter GmbH in Ovidius University Annals of Constanta - Series Civil Engineering
- Vol. 26 (1) , 22-27
The behavior of large panel constructions to seismic actions
Large panel structures were used on a large scale between 1975-1987 for block structures, being one of the solutions with high productivity for that period. Considering the appreciable volume of residential buildings with such a structure, the author group proposed to conduct research on the behavior of these structures, both in seismic actions and in other actions as a whole doing research on the way of behavior over time. The results of this research led to the application of appropriate methods and techniques for their rehabilitation, for some intervention works as a result of some identified shortcomings. Mainly the buildings that have facades made of large panels were studied, but buildings that were made with such a structure in their integrity are also presented. The obtained results offer valuable material in the development of knowledge and in the assessment of the degree of risk and vulnerability.
- 1 December 2024
- Published by Walter de Gruyter GmbH in Ovidius University Annals of Constanta - Series Civil Engineering
- Vol. 26 (1) , 22-27
Open AccessThe behavior of large panel constructions to seismic actions
Large panel structures were used on a large scale between 1975-1987 for block structures, being one of the solutions with high productivity for that period. Considering the appreciable volume of residential buildings with such a structure, the author group proposed to conduct research on the behavior of these structures, both in seismic actions and in other actions as a whole doing research on the way of behavior over time. The results of this research led to the application of appropriate methods and techniques for their rehabilitation, for some intervention works as a result of some identified shortcomings. Mainly the buildings that have facades made of large panels were studied, but buildings that were made with such a structure in their integrity are also presented. The obtained results offer valuable material in the development of knowledge and in the assessment of the degree of risk and vulnerability.
- Open Access
- 1 December 2023
- Published by Walter de Gruyter GmbH in Ovidius University Annals of Constanta - Series Civil Engineering
- Vol. 25 (1) , 81-91
Impermeabilization treatments for materials used in heritage buildings in Dobrogea Area
The water repellent treatments (impermeabilization treatments) are a type of treatment usually used for conservation of the material in heritage buildings (especially for porous stone, brick masonry or mortars) that are altered by water. The purpose of the research was to find out if those kinds of treatments can be used in materials from heritage buildings in Dobrogea area. For the samples taken from patrimony buildings and studied according to a proposed methodology the results showed that this type of treatments can be used according to the positive response obtained (taking into consideration the three criteria for evaluating the initial effectiveness, the potential harmfulness and durability of the treatment applied). The authors propose to use this type of treatments on other type of stone characteristic to this region and other materials also and to extend the study to various types of water repellent products.
- 1 December 2023
- Published by Walter de Gruyter GmbH in Ovidius University Annals of Constanta - Series Civil Engineering
- Vol. 25 (1) , 81-91
Open AccessImpermeabilization treatments for materials used in heritage buildings in Dobrogea Area
The water repellent treatments (impermeabilization treatments) are a type of treatment usually used for conservation of the material in heritage buildings (especially for porous stone, brick masonry or mortars) that are altered by water. The purpose of the research was to find out if those kinds of treatments can be used in materials from heritage buildings in Dobrogea area. For the samples taken from patrimony buildings and studied according to a proposed methodology the results showed that this type of treatments can be used according to the positive response obtained (taking into consideration the three criteria for evaluating the initial effectiveness, the potential harmfulness and durability of the treatment applied). The authors propose to use this type of treatments on other type of stone characteristic to this region and other materials also and to extend the study to various types of water repellent products.
- Open Access
- 1 December 2022
- Published by Walter de Gruyter GmbH in Ovidius University Annals of Constanta - Series Civil Engineering
- Vol. 24 (1) , 207-214
Requirements and Exigencies in Construction Quality Assurance
Ensuring the quality system in construction is a priority issue both at national and European level. The experience of the last years highlights the fact that the destructive events produced on constructions are the effects of some mistakes in design, execution and operation, but also the impact of new confrontations of constructions with the effects of climate change, energy saving or the reduction of destructive emissions. In this complex of factors that make constructions vulnerable, the role of the specialist in ensuring the quality system becomes increasingly important and at the same time visible in the concerns of all European Union states. In the content of the paper, the authors develop the aspects regarding the current requirements and demands of the construction quality system in Romania in the current context of the European Union.
- 1 December 2022
- Published by Walter de Gruyter GmbH in Ovidius University Annals of Constanta - Series Civil Engineering
- Vol. 24 (1) , 207-214
Open AccessRequirements and Exigencies in Construction Quality Assurance
Ensuring the quality system in construction is a priority issue both at national and European level. The experience of the last years highlights the fact that the destructive events produced on constructions are the effects of some mistakes in design, execution and operation, but also the impact of new confrontations of constructions with the effects of climate change, energy saving or the reduction of destructive emissions. In this complex of factors that make constructions vulnerable, the role of the specialist in ensuring the quality system becomes increasingly important and at the same time visible in the concerns of all European Union states. In the content of the paper, the authors develop the aspects regarding the current requirements and demands of the construction quality system in Romania in the current context of the European Union.
- Open Access
- 1 December 2022
- Published by Walter de Gruyter GmbH in Ovidius University Annals of Constanta - Series Civil Engineering
- Vol. 24 (1) , 101-106
International Regulations and Guidelines Regarding the Use of Earth as a Construction Material
New Zealand is a pioneer in the field of earthen constructions and has developed a number of regulations to serve architects, structural engineers and beneficiaries. The regulations adress material resistance, thermotechnical characteristics, on-site testing methods, building techniques, etc. Through the information contained, a framework is created to meet the needs of construction materials with low environmental impact. This article proposes a review of some soil testing methods found in the international literature for its use as a construction material.
- 1 December 2022
- Published by Walter de Gruyter GmbH in Ovidius University Annals of Constanta - Series Civil Engineering
- Vol. 24 (1) , 101-106
Open AccessInternational Regulations and Guidelines Regarding the Use of Earth as a Construction Material
New Zealand is a pioneer in the field of earthen constructions and has developed a number of regulations to serve architects, structural engineers and beneficiaries. The regulations adress material resistance, thermotechnical characteristics, on-site testing methods, building techniques, etc. Through the information contained, a framework is created to meet the needs of construction materials with low environmental impact. This article proposes a review of some soil testing methods found in the international literature for its use as a construction material.
- Open Access
- 1 December 2022
- Published by Walter de Gruyter GmbH in Ovidius University Annals of Constanta - Series Civil Engineering
- Vol. 24 (1) , 202-206
The Impact of Environmental Degradation on the Existing Built Stock
Human actions over time have led to the degradation of the environment, of natural resources with major implications in urban centers. Destructive factors can affect urban communities, land, the environment as a whole – water and air. The European Union recognizes the strategic importance of urban regeneration whose dimension is increasingly relevant. The authors develop a subject of maximum economic but also social importance through an in-depth analysis of the effects of land degradation through mining operations on the existing built stock, respectively on buildings, underground networks, drinking water, etc. An eloquent example is provided by urban communities in mining areas located at short distances from dangerous pollutants such as tailings dumps or underground galleries. Even if the geotechnical research over time did not highlight areas with a natural risk of landslides, however, the exploitation of lignite deposits, as a whole, the mining works in the Motrulu valley - the areas where the analyzed constructions were inspected, led to landslides with adverse effects on the existing built environment.
- 1 December 2022
- Published by Walter de Gruyter GmbH in Ovidius University Annals of Constanta - Series Civil Engineering
- Vol. 24 (1) , 202-206
Open AccessThe Impact of Environmental Degradation on the Existing Built Stock
Human actions over time have led to the degradation of the environment, of natural resources with major implications in urban centers. Destructive factors can affect urban communities, land, the environment as a whole – water and air. The European Union recognizes the strategic importance of urban regeneration whose dimension is increasingly relevant. The authors develop a subject of maximum economic but also social importance through an in-depth analysis of the effects of land degradation through mining operations on the existing built stock, respectively on buildings, underground networks, drinking water, etc. An eloquent example is provided by urban communities in mining areas located at short distances from dangerous pollutants such as tailings dumps or underground galleries. Even if the geotechnical research over time did not highlight areas with a natural risk of landslides, however, the exploitation of lignite deposits, as a whole, the mining works in the Motrulu valley - the areas where the analyzed constructions were inspected, led to landslides with adverse effects on the existing built environment.
- Open Access
- 1 December 2022
- Published by Walter de Gruyter GmbH in Ovidius University Annals of Constanta - Series Civil Engineering
- Vol. 24 (1) , 107-112
Materials and Techniques Used for Roman Buildings in Dobrogea
The restoration and enhancement of ancient vestiges is of particular importance for the development of knowledge. The article makes a brief review of the materials, methods and techniques used by the Romans to make constructions throughout the Roman Empire, analyzing first of all the techniques that we find used to build the fortresses in Dobrogea.
- 1 December 2022
- Published by Walter de Gruyter GmbH in Ovidius University Annals of Constanta - Series Civil Engineering
- Vol. 24 (1) , 107-112
Open AccessMaterials and Techniques Used for Roman Buildings in Dobrogea
The restoration and enhancement of ancient vestiges is of particular importance for the development of knowledge. The article makes a brief review of the materials, methods and techniques used by the Romans to make constructions throughout the Roman Empire, analyzing first of all the techniques that we find used to build the fortresses in Dobrogea.
- Open Access
- 1 December 2022
- Published by Walter de Gruyter GmbH in Ovidius University Annals of Constanta - Series Civil Engineering
- Vol. 24 (1) , 163-177
Elements of Structural Reinforcement in Heritage Buildings
An important role in a good construction design in structural compliance is the provision of appropriate structural connections. Since the beginning of construction, the use of durable materials and the use of appropriate techniques have been the main concerns of builders. The appearance of metal represented a progress in the realization of sustainable constructions, successfully responding to critical situations generated by elements subject to stretching. The authors develop an important topic in the structural analysis of heritage constructions made during the 15th, 16th, 18th, 19th and early 20th centuries, when the connections of the opposite walls were made with tie rods made of metal plates embedded in the floor structure and anchored on the facade of the walls through various practical but also ornamental anchoring systems. At the same time, they also applied to the anchoring of the shield walls on the attic area, the frames, the gables, etc.
- 1 December 2022
- Published by Walter de Gruyter GmbH in Ovidius University Annals of Constanta - Series Civil Engineering
- Vol. 24 (1) , 163-177
Open AccessElements of Structural Reinforcement in Heritage Buildings
An important role in a good construction design in structural compliance is the provision of appropriate structural connections. Since the beginning of construction, the use of durable materials and the use of appropriate techniques have been the main concerns of builders. The appearance of metal represented a progress in the realization of sustainable constructions, successfully responding to critical situations generated by elements subject to stretching. The authors develop an important topic in the structural analysis of heritage constructions made during the 15th, 16th, 18th, 19th and early 20th centuries, when the connections of the opposite walls were made with tie rods made of metal plates embedded in the floor structure and anchored on the facade of the walls through various practical but also ornamental anchoring systems. At the same time, they also applied to the anchoring of the shield walls on the attic area, the frames, the gables, etc.