Fabio Micozzi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Fabio Micozzi has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
- Andrea Dall’aSta
University of Camerino
15 shared publications - Laura Ragni
Polytechnic University of Marche
8 shared publications - Alessandro Zona
University of Camerino
7 shared publications - Laura Gioiella
University of Camerino
7 shared publications - Michele Morici
University of Camerino
6 shared publications - Alberto Poeta
School of Science and Technology, University of Camerino, Via Gentile da Varano III 26, 62032 Camerino, Italy
2 shared publications
Latest Publications
- Open Access
- 1 August 2026
- Published by NDT.net GmbH & Co. KG in e-Journal of Nondestructive Testing
- Vol. 31 (8)
Preliminary results for the evaluation of the influence of noise in Computer-Vision Sub-Pixel Algorithms for Displacement Monitoring
Vision-based displacement measurement has gained considerable attention in Structural Health Monitoring (SHM), where the need to detect small structural motions with non-contact instrumentation has driven the development of subpixel estimation algorithms capable of achieving resolution well below the nominal pixel size. This study investigates and compares three different algorithms for real-time displacement extraction, evaluating their performance under controlled conditions through synthetic video sequences with exactly known imposed motion. Particular attention is devoted to the systematic errors inherent to each algorithm and to how these are influenced by external factors typical of SHM real-world applications, namely optical blur and target size. The analysis is carried out using AprilTag markers as targets identifying the points whose displacements are tracked. The presented study assesses each algorithm in terms of accuracy, robustness, and computational efficiency, with the goal of identifying their strengths and limitations, thus, offering practical guidance for their application in real-world monitoring scenarios.
- 1 August 2026
- Published by NDT.net GmbH & Co. KG in e-Journal of Nondestructive Testing
- Vol. 31 (8)
Open AccessPreliminary results for the evaluation of the influence of noise in Computer-Vision Sub-Pixel Algorithms for Displacement Monitoring
Vision-based displacement measurement has gained considerable attention in Structural Health Monitoring (SHM), where the need to detect small structural motions with non-contact instrumentation has driven the development of subpixel estimation algorithms capable of achieving resolution well below the nominal pixel size. This study investigates and compares three different algorithms for real-time displacement extraction, evaluating their performance under controlled conditions through synthetic video sequences with exactly known imposed motion. Particular attention is devoted to the systematic errors inherent to each algorithm and to how these are influenced by external factors typical of SHM real-world applications, namely optical blur and target size. The analysis is carried out using AprilTag markers as targets identifying the points whose displacements are tracked. The presented study assesses each algorithm in terms of accuracy, robustness, and computational efficiency, with the goal of identifying their strengths and limitations, thus, offering practical guidance for their application in real-world monitoring scenarios.
- Open Access
- 23 December 2025
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 55 (3) , 781-803
Combined Vertical and Horizontal Components of Near‐Source Earthquakes and Impact on Base‐Isolated Structures
Over recent decades, the collection of seismic data has improved the understanding of near‐fault ground motion effects, which involve both horizontal and vertical components. Among the most significant effects are fault‐normal directivity, which concentrates seismic energy into an intense, long‐period pulse, and fault‐parallel fling step, which causes permanent ground displacement. In dip‐slip faulting scenarios (such as reverse and normal faults), significant vertical acceleration also occurs, as highlighted by recent studies, which have shown that vertical acceleration can exceed the horizontal component at short spectral periods. This research proposes a systematic approach to evaluate the combined effects of the vertical and horizontal components of near‐fault ground motion – including pulse‐like effects – for different near‐source scenarios. The approach is applied to base‐isolated structures equipped with high‐damping rubber bearings (HDRBs), either alone or in combination with flat slider bearings (FSBs). The results, consistent with previous experimental and numerical studies on similar isolation systems, indicate that the vertical component does not influence the horizontal response of the hybrid isolation system or the superstructure, but it can cause uplift of FSBs, cavitation of HDRBs, and very large vertical accelerations in the superstructure. Furthermore, for scenarios similar to the one considered, they provide insight into the fault distances at which these phenomena may pose significant challenges for base‐isolated buildings.
- 23 December 2025
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 55 (3) , 781-803
Open AccessCombined Vertical and Horizontal Components of Near‐Source Earthquakes and Impact on Base‐Isolated Structures
Over recent decades, the collection of seismic data has improved the understanding of near‐fault ground motion effects, which involve both horizontal and vertical components. Among the most significant effects are fault‐normal directivity, which concentrates seismic energy into an intense, long‐period pulse, and fault‐parallel fling step, which causes permanent ground displacement. In dip‐slip faulting scenarios (such as reverse and normal faults), significant vertical acceleration also occurs, as highlighted by recent studies, which have shown that vertical acceleration can exceed the horizontal component at short spectral periods. This research proposes a systematic approach to evaluate the combined effects of the vertical and horizontal components of near‐fault ground motion – including pulse‐like effects – for different near‐source scenarios. The approach is applied to base‐isolated structures equipped with high‐damping rubber bearings (HDRBs), either alone or in combination with flat slider bearings (FSBs). The results, consistent with previous experimental and numerical studies on similar isolation systems, indicate that the vertical component does not influence the horizontal response of the hybrid isolation system or the superstructure, but it can cause uplift of FSBs, cavitation of HDRBs, and very large vertical accelerations in the superstructure. Furthermore, for scenarios similar to the one considered, they provide insight into the fault distances at which these phenomena may pose significant challenges for base‐isolated buildings.
- Open Access
- 1 December 2025
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 30 (12)
Real-Time Vision-Based Dynamic Monitoring of Vertical and Horizontal Transverse Displacements in Bridge Decks
- 1 December 2025
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 30 (12)
Open AccessReal-Time Vision-Based Dynamic Monitoring of Vertical and Horizontal Transverse Displacements in Bridge Decks
- 1 October 2025
- Published by Springer Nature
- p. 291-300
Multi-Target Computer-Vision Monitoring of Multi-Story Buildings During Shake Table Tests
- 1 October 2025
- Published by Springer Nature
- p. 291-300
Multi-Target Computer-Vision Monitoring of Multi-Story Buildings During Shake Table Tests
- Open Access
- 2 August 2025
- Published by MDPI AG in Infrastructures
- Vol. 10 (8) , 203
The Development and Statistical Analysis of a Material Strength Database of Existing Italian Prestressed Concrete Bridges
This paper reports a statistical analysis of a database archiving information on the strengths of the materials in existing Italian bridges having pre- and post-tensioned concrete beams. Data were collected in anonymous form by analyzing a stock of about 170 bridges built between 1960 and 2000 and located in several Italian regions. To date, the database refers to steel reinforcing bars, concrete, and prestressing steel, whose strengths were gathered from design nominal values, acceptance certificates, and in situ test results, all derived by consulting the available documents for each examined bridge. At first, this paper describes how the available data were collected. Then, the results of a statistical analysis are presented and commented on. Moreover, goodness-of-fit tests are carried out to verify the assumption validity of a normal distribution for steel reinforcing bars and prestressing steel, and a log-normal distribution for concrete. The database represents a valuable resource for researchers and practitioners for the assessment of existing bridges. It may be applied for the use of prior knowledge within a framework where Bayesian methods are included for reducing uncertainties. The database provides essential information on the strengths of the materials to be used for a simulated design and/or for verification in the case of limited knowledge. Goodness-of-fit tests make the collected information very useful, even if probabilistic methods are applied.
- 2 August 2025
- Published by MDPI AG in Infrastructures
- Vol. 10 (8) , 203
Open AccessThe Development and Statistical Analysis of a Material Strength Database of Existing Italian Prestressed Concrete Bridges
This paper reports a statistical analysis of a database archiving information on the strengths of the materials in existing Italian bridges having pre- and post-tensioned concrete beams. Data were collected in anonymous form by analyzing a stock of about 170 bridges built between 1960 and 2000 and located in several Italian regions. To date, the database refers to steel reinforcing bars, concrete, and prestressing steel, whose strengths were gathered from design nominal values, acceptance certificates, and in situ test results, all derived by consulting the available documents for each examined bridge. At first, this paper describes how the available data were collected. Then, the results of a statistical analysis are presented and commented on. Moreover, goodness-of-fit tests are carried out to verify the assumption validity of a normal distribution for steel reinforcing bars and prestressing steel, and a log-normal distribution for concrete. The database represents a valuable resource for researchers and practitioners for the assessment of existing bridges. It may be applied for the use of prior knowledge within a framework where Bayesian methods are included for reducing uncertainties. The database provides essential information on the strengths of the materials to be used for a simulated design and/or for verification in the case of limited knowledge. Goodness-of-fit tests make the collected information very useful, even if probabilistic methods are applied.
- Open Access
- 30 May 2025
- Published by Elsevier in Engineering Structures
- Vol. 339
Long-term viscous effects of in-field tests on HDRBs-based seismic isolation systems
- 30 May 2025
- Published by Elsevier in Engineering Structures
- Vol. 339
Open AccessLong-term viscous effects of in-field tests on HDRBs-based seismic isolation systems
- Open Access
- 1 January 2025
- Published by Wiley in Structural Control and Health Monitoring
- Vol. 2025 (1)
Vision‐Based Monitoring of Absolute and Relative Displacements in Multistory Buildings During Full‐Scale Shake‐Table Tests
Displacements are among the most important engineering response parameters to be monitored during shake‐table testing, with experiments playing a key role in studying the seismic behavior of structures. However, their accurate measurement is not a trivial task when using contact sensors. Computer vision is an attractive alternative for monitoring absolute and relative displacements, and this study presents a new configuration to fully exploit its potential. The proposed solution combines internal and external video cameras. The former is installed on the roof and points downwards to simultaneously acquire the displacements of targets located throughout the height of the building. The latter was installed outside the shake‐table platen and tracked the roof displacements to provide redundant measures for control and noise compensation. In this way, the movements of the buildings can be reconstructed with high robustness and precision using a limited number of video cameras. The proposed configuration was applied for the first time during shake‐table testing of a full‐scale six‐story building on the outdoor shake table at the University of California, San Diego. The measurements obtained up to strong dynamic inputs showed the capacity of the proposed approach in real‐world environmental conditions and were used for a critical comparison with conventional contact sensors.
- 1 January 2025
- Published by Wiley in Structural Control and Health Monitoring
- Vol. 2025 (1)
Open AccessVision‐Based Monitoring of Absolute and Relative Displacements in Multistory Buildings During Full‐Scale Shake‐Table Tests
Displacements are among the most important engineering response parameters to be monitored during shake‐table testing, with experiments playing a key role in studying the seismic behavior of structures. However, their accurate measurement is not a trivial task when using contact sensors. Computer vision is an attractive alternative for monitoring absolute and relative displacements, and this study presents a new configuration to fully exploit its potential. The proposed solution combines internal and external video cameras. The former is installed on the roof and points downwards to simultaneously acquire the displacements of targets located throughout the height of the building. The latter was installed outside the shake‐table platen and tracked the roof displacements to provide redundant measures for control and noise compensation. In this way, the movements of the buildings can be reconstructed with high robustness and precision using a limited number of video cameras. The proposed configuration was applied for the first time during shake‐table testing of a full‐scale six‐story building on the outdoor shake table at the University of California, San Diego. The measurements obtained up to strong dynamic inputs showed the capacity of the proposed approach in real‐world environmental conditions and were used for a critical comparison with conventional contact sensors.
- 29 September 2024
- Published by Springer Nature
- p. 229-239
Numerical Simulation of Push-and-Release Tests of Hybrid Isolation Systems
- 29 September 2024
- Published by Springer Nature
- p. 229-239
Numerical Simulation of Push-and-Release Tests of Hybrid Isolation Systems
- 29 September 2024
- Published by Springer Nature
- p. 67-81
Influence of Dynamic Properties Variability of Elastomeric Bearings on the Seismic Response of Base-Isolated Structures
- 29 September 2024
- Published by Springer Nature
- p. 67-81
Influence of Dynamic Properties Variability of Elastomeric Bearings on the Seismic Response of Base-Isolated Structures
- Open Access
- 6 March 2024
- Published by MDPI AG in Preprints.org
Influence of Knowledge Uncertainties on the Safety Assessment of Existing Post-tensioned Concrete Bridges
The assessment of existing bridges constitutes a serious challenge for the researchers since their safety evaluation is a complex task due to several sources of uncertainty affecting the parameters identified in the knowledge process. In particular, a high level of uncertainties may arise in the case of prestressing systems requiring special investigation strategies and experimental technologies. The paper aims to investigate how the knowledge uncertainties influence the safety assessment of existing post-tensioned bridges. The semi-probabilistic approach is used, and uncertainties related to the knowledge process are described considering the number of tests, the confidence level assumed for the estimation of the problem parameters, and the measurement errors of in-situ tests. Results concerning a typical post-tensioned bridge are reported and the variability of the outcomes is discussed and compared with a reference case of “perfect knowledge”. The main results of the study confirm the general robustness of the semi-probabilistic Eurocodes safety format and provide an overview of dispersion due to different choices about the number of tests and confidence level. The measurement errors may lead to significant under-estimation of the computed structural capacity with respect to the reference one.
- 6 March 2024
- Published by MDPI AG in Preprints.org
Open AccessInfluence of Knowledge Uncertainties on the Safety Assessment of Existing Post-tensioned Concrete Bridges
The assessment of existing bridges constitutes a serious challenge for the researchers since their safety evaluation is a complex task due to several sources of uncertainty affecting the parameters identified in the knowledge process. In particular, a high level of uncertainties may arise in the case of prestressing systems requiring special investigation strategies and experimental technologies. The paper aims to investigate how the knowledge uncertainties influence the safety assessment of existing post-tensioned bridges. The semi-probabilistic approach is used, and uncertainties related to the knowledge process are described considering the number of tests, the confidence level assumed for the estimation of the problem parameters, and the measurement errors of in-situ tests. Results concerning a typical post-tensioned bridge are reported and the variability of the outcomes is discussed and compared with a reference case of “perfect knowledge”. The main results of the study confirm the general robustness of the semi-probabilistic Eurocodes safety format and provide an overview of dispersion due to different choices about the number of tests and confidence level. The measurement errors may lead to significant under-estimation of the computed structural capacity with respect to the reference one.