Talgat Kaiym
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Talgat Kaiym has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Suleimen Kaimov
Institute of Mechanics and Engineering named after U. A. Joldasbekov
6 shared publications - Abylay Kaimov
Institute of Mechanics and Engineering named after U. A. Joldasbekov
5 shared publications - Aidarkhan Kaimov
Al-Farabi Kazakh National University
5 shared publications - Amandyk Tuleshov
Laboratory of Intelligent Robotic Systems, Joldasbekov Institute of Mechanics and Engineering, Almaty 050010, Kazakhstan
3 shared publications - Altynay Primbetova
Halyk Bank of Republic of Kazakhstan
2 shared publications - Askar Seidakhmet
Joldasbekov Institute of Mechanics and Engineering, Kurmagazy Str. 29, Almaty 050010, Kazakhstan
2 shared publications
Latest Publications
- Open Access
- 28 August 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (10 (136)) , 6-27
Justification of a dual ventilation system for the complete burial of high-level radioactive waste in spent open mines
The complete burial of high-level radioactive waste (HLW) in spent open mines presents a promising solution to long-term waste isolation. This study presents the justification and design of an innovative dual ventilation system aimed at regulating heat and removing gas-dust mixtures from such repositories. The ventilation system is designed to control dust-gas emissions and thermal loads through a two-chimney configuration, enabling efficient gas extraction and convective cooling. A system of main and additional chimneys is proposed: the main chimney channels the rising hot gas-dust mixture, while the additional chimney processes it through a staged treatment system before final disposal. Mathematical modeling, including Fourier’s Law, Darcy’s Law, and Fick’s Law, supports the thermal, hydraulic, and gas dynamics simulations. The study demonstrates that with adequate ventilation flow and composite-layer insulation, internal repository temperatures can be reduced from 300°C to below 100°C within 30 years, significantly lowering the risk of container degradation and gas-induced particle mobilization. The integrated system improves the safety, observability, and long-term reliability of HLW burial in open spent mines, offering a scalable and internationally compliant solution. Through a combination of temperature distribution modeling, structural analysis, and airflow simulations, the system's viability is demonstrated. The results show that the proposed ventilation configuration provides effective thermal regulation, structural resilience under stress, and compatibility with repurposed mining infrastructure. The study contributes a scalable, energy-efficient solution to HLW (High-level radioactive waste) repository management, paving the way for safer and more sustainable nuclear waste isolation
- 28 August 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (10 (136)) , 6-27
Open AccessJustification of a dual ventilation system for the complete burial of high-level radioactive waste in spent open mines
The complete burial of high-level radioactive waste (HLW) in spent open mines presents a promising solution to long-term waste isolation. This study presents the justification and design of an innovative dual ventilation system aimed at regulating heat and removing gas-dust mixtures from such repositories. The ventilation system is designed to control dust-gas emissions and thermal loads through a two-chimney configuration, enabling efficient gas extraction and convective cooling. A system of main and additional chimneys is proposed: the main chimney channels the rising hot gas-dust mixture, while the additional chimney processes it through a staged treatment system before final disposal. Mathematical modeling, including Fourier’s Law, Darcy’s Law, and Fick’s Law, supports the thermal, hydraulic, and gas dynamics simulations. The study demonstrates that with adequate ventilation flow and composite-layer insulation, internal repository temperatures can be reduced from 300°C to below 100°C within 30 years, significantly lowering the risk of container degradation and gas-induced particle mobilization. The integrated system improves the safety, observability, and long-term reliability of HLW burial in open spent mines, offering a scalable and internationally compliant solution. Through a combination of temperature distribution modeling, structural analysis, and airflow simulations, the system's viability is demonstrated. The results show that the proposed ventilation configuration provides effective thermal regulation, structural resilience under stress, and compatibility with repurposed mining infrastructure. The study contributes a scalable, energy-efficient solution to HLW (High-level radioactive waste) repository management, paving the way for safer and more sustainable nuclear waste isolation
- 1 December 2024
- Published by Springer Nature
- p. 231-240
Development of Deposits of Solid Mineral Resources by the Open Method in Various Conditions of Mining and Geological Deposits
- 1 December 2024
- Published by Springer Nature
- p. 231-240
Development of Deposits of Solid Mineral Resources by the Open Method in Various Conditions of Mining and Geological Deposits
- Open Access
- 25 October 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (10 (131)) , 6-28
Justification of an innovative system for the complete burial of solid, high-level radioactive waste (HLW) in spent open-pit mines
The object of research is the spent open-pit mines themselves where the proposed system could be applied. The primary reason for this studying is the following circumstance: up to the present time period, in all countries of the world, no methods of HLW disposal in a storage facility has been identified that is absolutely safe for any length of time, taking into account the impact of catastrophic natural emergencies and man-made emergencies. The research was conducted to address the problem of safely managing and storing HLW, leveraging the unique characteristics of spent open-pit mines, such as their large volume and geological stability, to prevent environmental contamination and ensure long-term safety. In the article has been justified a novel approach to the burial of sarcophagus containers with solid HLW in exhausted mining pits and studied the usabilities of the basalt sarcofagous container. Robust materials and advanced robotic systems proposed in the article aims to address the challenges associated with long-term radioactive waste disposal effectively. The robotic systems transfer the basalt container with HLW, ensuring personnel safety by minimizing human presence near radioactive materials. In the article have been established the distribution of temperature into the multi-layered composite structure of the basalt sarcophagous with HLW from 300 °C into the inner space to 50 °C onto on the its outer suffer where the thickness of each layers (from inner to outer radius) was respectively: for lead matrix: from r1=0.1 m to r2=0.2 m; for clay layer: from r2=0.2 m to r3=0.3 m; for basalt block: from r3=0.3 m to r4=0.4 m. The findings on temperature distribution are crucial as they directly affect the performance and longevity of the basalt containment system
- 25 October 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (10 (131)) , 6-28
Open AccessJustification of an innovative system for the complete burial of solid, high-level radioactive waste (HLW) in spent open-pit mines
The object of research is the spent open-pit mines themselves where the proposed system could be applied. The primary reason for this studying is the following circumstance: up to the present time period, in all countries of the world, no methods of HLW disposal in a storage facility has been identified that is absolutely safe for any length of time, taking into account the impact of catastrophic natural emergencies and man-made emergencies. The research was conducted to address the problem of safely managing and storing HLW, leveraging the unique characteristics of spent open-pit mines, such as their large volume and geological stability, to prevent environmental contamination and ensure long-term safety. In the article has been justified a novel approach to the burial of sarcophagus containers with solid HLW in exhausted mining pits and studied the usabilities of the basalt sarcofagous container. Robust materials and advanced robotic systems proposed in the article aims to address the challenges associated with long-term radioactive waste disposal effectively. The robotic systems transfer the basalt container with HLW, ensuring personnel safety by minimizing human presence near radioactive materials. In the article have been established the distribution of temperature into the multi-layered composite structure of the basalt sarcophagous with HLW from 300 °C into the inner space to 50 °C onto on the its outer suffer where the thickness of each layers (from inner to outer radius) was respectively: for lead matrix: from r1=0.1 m to r2=0.2 m; for clay layer: from r2=0.2 m to r3=0.3 m; for basalt block: from r3=0.3 m to r4=0.4 m. The findings on temperature distribution are crucial as they directly affect the performance and longevity of the basalt containment system
- Open Access
- 31 August 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (1 (124)) , 72-84
Justification of the innovative design of the skip winch with a body moved by a counterweight gravity drive
The article has to grapple with the problem of creating an economically efficient and environmentally friendly technological process for a development of solid minerals in open-pit mining. In many mining countries of the world today, the depth of many open pits is already 400–600 m or more. At the same time, the cost of transporting 1 ton of rock mass when operating a quarry whose depth is 400 m is 65–70 % of the total cost of extracting 1 ton of minerals. The object of research is technical devices for transport of rock masses in the technological process of development of solid useful deposits in open pit mining. The main reasons are the need to construct transport routes for them by withdrawing the sections of the rock mass on above them, as well their lifting capacity is limited because of they all do use highly energy-intensive machines for transporting rock minerals. In article has been justified a skip cable winch supplied with a wheels moving along on a railroad way by using only a gravitational counterweight device for transporting rock mass from a place of their formation to Earth surface. There have been created a prototype of a planar skip winch with four cables for practical implement in open-pit mining. The theoretical and experimental investigations of the prototype have being confirmed its performance. The created skip winch will accomplish its performancing without using any energy machines even under adverse climate conditions. Its affected would allow to make an open-pit effectiveness to soar and environmentally do friendly because of there are all but excluded any transport vehicles whether on gasoline or diesel oil
- 31 August 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (1 (124)) , 72-84
Open AccessJustification of the innovative design of the skip winch with a body moved by a counterweight gravity drive
The article has to grapple with the problem of creating an economically efficient and environmentally friendly technological process for a development of solid minerals in open-pit mining. In many mining countries of the world today, the depth of many open pits is already 400–600 m or more. At the same time, the cost of transporting 1 ton of rock mass when operating a quarry whose depth is 400 m is 65–70 % of the total cost of extracting 1 ton of minerals. The object of research is technical devices for transport of rock masses in the technological process of development of solid useful deposits in open pit mining. The main reasons are the need to construct transport routes for them by withdrawing the sections of the rock mass on above them, as well their lifting capacity is limited because of they all do use highly energy-intensive machines for transporting rock minerals. In article has been justified a skip cable winch supplied with a wheels moving along on a railroad way by using only a gravitational counterweight device for transporting rock mass from a place of their formation to Earth surface. There have been created a prototype of a planar skip winch with four cables for practical implement in open-pit mining. The theoretical and experimental investigations of the prototype have being confirmed its performance. The created skip winch will accomplish its performancing without using any energy machines even under adverse climate conditions. Its affected would allow to make an open-pit effectiveness to soar and environmentally do friendly because of there are all but excluded any transport vehicles whether on gasoline or diesel oil
- Open Access
- 30 April 2022
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (2 (116)) , 13-26
Development of intelligent and expert system for automation of processes of mining and transport works on the basis of satellite navigation
The object of research relates to the field of control systems for mining and transport machines in the development of deposits of solid minerals in an open way. The problem of reducing the cost of transporting 1 ton of rock mass and increasing the efficiency of these machines is being solved. The article develops an expert system for dispatching mining vehicles with a subsystem for selecting their innovative appearance with the ability to control their operational parameters, taking into account the stochastic conditions of the developed sections of the rock mass. The mathematical model for constructing the prospective appearance of a mining and transport machine, based on its functional and economic assessment, is reduced to solving the problem of optimizing the generalized criterion of the required efficiency. As an example of private indicators of their effectiveness in operation, there is an expert analysis of the evaluation of solution options, for example, structural-kinematic and operational parameters of these machines, etc. Innovative designs of a skip body of any size of its carrying capacity of single-rope and multi-rope steeply inclined skip hoists for highly profitable mining in quarries are substantiated. unlimited values of their depth and annual productivity. In the proposed study, the values of the forces of resistance to the destruction of a section of a rock mass, obtained by analytical and experimental methods, are refined by finding the optimal Kalman coefficient, which increases the efficiency of using mining and transport machines. The proposed methods provide the creation of innovative mining and transport machines with the ability to control their operational parameters, taking into account the stochastic conditions of the developed section of the rock mass
- 30 April 2022
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (2 (116)) , 13-26
Open AccessDevelopment of intelligent and expert system for automation of processes of mining and transport works on the basis of satellite navigation
The object of research relates to the field of control systems for mining and transport machines in the development of deposits of solid minerals in an open way. The problem of reducing the cost of transporting 1 ton of rock mass and increasing the efficiency of these machines is being solved. The article develops an expert system for dispatching mining vehicles with a subsystem for selecting their innovative appearance with the ability to control their operational parameters, taking into account the stochastic conditions of the developed sections of the rock mass. The mathematical model for constructing the prospective appearance of a mining and transport machine, based on its functional and economic assessment, is reduced to solving the problem of optimizing the generalized criterion of the required efficiency. As an example of private indicators of their effectiveness in operation, there is an expert analysis of the evaluation of solution options, for example, structural-kinematic and operational parameters of these machines, etc. Innovative designs of a skip body of any size of its carrying capacity of single-rope and multi-rope steeply inclined skip hoists for highly profitable mining in quarries are substantiated. unlimited values of their depth and annual productivity. In the proposed study, the values of the forces of resistance to the destruction of a section of a rock mass, obtained by analytical and experimental methods, are refined by finding the optimal Kalman coefficient, which increases the efficiency of using mining and transport machines. The proposed methods provide the creation of innovative mining and transport machines with the ability to control their operational parameters, taking into account the stochastic conditions of the developed section of the rock mass
- Open Access
- 28 February 2022
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 1 (7(115)) , 48-58
Creation of an innovative robot with a gripper for moving plant microshoots from the in vitro transport tank to the working tank with soil ground at the stage of their adaptation in soil ground during microclonal reproduction
The industrial development of cities is the main cause of the destruction and degradation of natural resources around the world. Urbanization negatively affects the species composition of plants, the atmosphere and soil cover of areas of populated areas of large cities of the World. Tree plantations are the main mechanism for stabilizing the ecological situation in large cities and arid territories of the countries of the World. In this regard, in order to obtain a large number of genetically identical plants using their micropropagation, it is necessary to automate the main stages of this technological process. The result of the study is the creation of an adaptive phalanx gripper of a robotic complex for automating the technological process of handling operations. That will have a positive effect on solving the urgent problem of planting greenery in large cities and areas of arid territories not only in the Republic of Kazakhstan, but also in other countries of the World and represents a fundamentally new approach to solving the environmental problems of the Earth. The article substantiates various options for structural-kinematic schemes of the robot gripper, taking into account the stochastic conditions of its interaction with the overloaded object. Mathematical methods have been created for the selection and justification of the geometric, structural-kinematic and dynamic parameters of grippers for overloading plant microshoots and their computer 3D models. Software has been developed for modeling the functioning of a remotely controlled physical prototype of a mobile robot with an adaptive gripper for reloading microshoots from a transport tank to a cargo tank.
- 28 February 2022
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 1 (7(115)) , 48-58
Open AccessCreation of an innovative robot with a gripper for moving plant microshoots from the in vitro transport tank to the working tank with soil ground at the stage of their adaptation in soil ground during microclonal reproduction
The industrial development of cities is the main cause of the destruction and degradation of natural resources around the world. Urbanization negatively affects the species composition of plants, the atmosphere and soil cover of areas of populated areas of large cities of the World. Tree plantations are the main mechanism for stabilizing the ecological situation in large cities and arid territories of the countries of the World. In this regard, in order to obtain a large number of genetically identical plants using their micropropagation, it is necessary to automate the main stages of this technological process. The result of the study is the creation of an adaptive phalanx gripper of a robotic complex for automating the technological process of handling operations. That will have a positive effect on solving the urgent problem of planting greenery in large cities and areas of arid territories not only in the Republic of Kazakhstan, but also in other countries of the World and represents a fundamentally new approach to solving the environmental problems of the Earth. The article substantiates various options for structural-kinematic schemes of the robot gripper, taking into account the stochastic conditions of its interaction with the overloaded object. Mathematical methods have been created for the selection and justification of the geometric, structural-kinematic and dynamic parameters of grippers for overloading plant microshoots and their computer 3D models. Software has been developed for modeling the functioning of a remotely controlled physical prototype of a mobile robot with an adaptive gripper for reloading microshoots from a transport tank to a cargo tank.