Neil Rowlands
Research Subjects
Neil Rowlands has a total of 1000 co-authors. Here are the top co-authors by number of shared publications:
- Chris J. Willott
National Research Council of Canada
9 shared publications - Loïc Albert
Université de Montréal
9 shared publications - René Doyon
Institut Trottier de recherche sur les exoplanètes, Département de Physique, Université de Montréal, Montréal
8 shared publications - Paul Goudfrooij
Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218, USA
7 shared publications - Stephanie LaMassa
Space Telescope Science Institute
7 shared publications - Étienne Artigau
Institut Trottier de recherche sur les exoplanètes, Département de Physique, Université de Montréal
7 shared publications
Latest Publications
- Top Cited PapersOpen Access
- 1 September 2023
- Published by IOP Publishing in Publications of the Astronomical Society of the Pacific
- Vol. 135 (1051) , 098001
The Near Infrared Imager and Slitless Spectrograph for the James Webb Space Telescope. I. Instrument Overview and In-flight Performance
The Near-Infrared Imager and Slitless Spectrograph (NIRISS) is the science module of the Canadian-built Fine Guidance Sensor onboard the James Webb Space Telescope (JWST). NIRISS has four observing modes: (1) broadband imaging featuring seven of the eight NIRCam broadband filters, (2) wide-field slitless spectroscopy at a resolving power of ∼150 between 0.8 and 2.2 μm, (3) single-object cross-dispersed slitless spectroscopy (SOSS) enabling simultaneous wavelength coverage between 0.6 and 2.8 μm at R ∼ 700, a mode optimized for exoplanet spectroscopy of relatively bright (J < 6.3) stars and (4) aperture masking interferometry (AMI) between 2.8 and 4.8 μm enabling high-contrast (∼10−3 − 10−4) imaging at angular separations between 70 and 400 mas for relatively bright (M < 8) sources. This paper presents an overview of the NIRISS instrument, its design, its scientific capabilities, and a summary of in-flight performance. NIRISS shows significantly better response shortward of ∼2.5 μm resulting in 10%–40% sensitivity improvement for broadband and low-resolution spectroscopy compared to pre-flight predictions. Two time-series observations performed during instrument commissioning in the SOSS mode yield very stable spectro-photometry performance within ∼10% of the expected noise. The first space-based companion detection of the tight binary star AB Dor AC through AMI was demonstrated.
- 1 September 2023
- Published by IOP Publishing in Publications of the Astronomical Society of the Pacific
- Vol. 135 (1051) , 098001
Top Cited PapersOpen AccessThe Near Infrared Imager and Slitless Spectrograph for the James Webb Space Telescope. I. Instrument Overview and In-flight Performance
The Near-Infrared Imager and Slitless Spectrograph (NIRISS) is the science module of the Canadian-built Fine Guidance Sensor onboard the James Webb Space Telescope (JWST). NIRISS has four observing modes: (1) broadband imaging featuring seven of the eight NIRCam broadband filters, (2) wide-field slitless spectroscopy at a resolving power of ∼150 between 0.8 and 2.2 μm, (3) single-object cross-dispersed slitless spectroscopy (SOSS) enabling simultaneous wavelength coverage between 0.6 and 2.8 μm at R ∼ 700, a mode optimized for exoplanet spectroscopy of relatively bright (J < 6.3) stars and (4) aperture masking interferometry (AMI) between 2.8 and 4.8 μm enabling high-contrast (∼10−3 − 10−4) imaging at angular separations between 70 and 400 mas for relatively bright (M < 8) sources. This paper presents an overview of the NIRISS instrument, its design, its scientific capabilities, and a summary of in-flight performance. NIRISS shows significantly better response shortward of ∼2.5 μm resulting in 10%–40% sensitivity improvement for broadband and low-resolution spectroscopy compared to pre-flight predictions. Two time-series observations performed during instrument commissioning in the SOSS mode yield very stable spectro-photometry performance within ∼10% of the expected noise. The first space-based companion detection of the tight binary star AB Dor AC through AMI was demonstrated.
- Open Access
- 1 July 2023
- Published by IOP Publishing in Publications of the Astronomical Society of the Pacific
- Vol. 135 (1049) , 075001
The Near Infrared Imager and Slitless Spectrograph for the James Webb Space Telescope. III. Single Object Slitless Spectroscopy
The Near Infrared Imager and Slitless Spectrograph instrument (NIRISS) is the Canadian Space Agency contribution to the suite of four science instruments of the James Webb Space Telescope. As one of the three NIRISS observing modes, the Single Object Slitless Spectroscopy (SOSS) mode is tailor-made to undertake time-series observations of exoplanets to perform transit spectroscopy. The SOSS permits observing point sources between 0.6 and 2.8 μm at a resolving power of 650 at 1.25 μm using a slitless cross-dispersing grism while its defocussing cylindrical lens enables observing targets as bright as J = 6.7 by spreading light across 23 pixels along the cross-dispersion axis. This paper officially presents the design of the SOSS mode, its operation, characterization, and its performance, from ground-based testing and flight-based commissioning. On-sky measurements demonstrate a peak photon conversion efficiency of 55% at 1.2 μm. The first time series on the A-type star BD+60°1753 achieves a flux stability close to the photon-noise limit, so far tested to a level of 20 parts per million on a 40 minute timescale after simply subtracting a long-term trend. Uncorrected 1/f noise residuals underneath the spectral traces add an extra source of noise equivalent to doubling the readout noise. Preliminary analysis of an HAT-P-14b transit time series indicates that it is difficult to remove all of the noise in pixels with partially saturated ramps. Overall, the SOSS delivers performance at the level required to tackle key exoplanetary science programs such as detecting secondary atmospheres on terrestrial planets and measuring abundances of several chemical species in gas giants.
- 1 July 2023
- Published by IOP Publishing in Publications of the Astronomical Society of the Pacific
- Vol. 135 (1049) , 075001
Open AccessThe Near Infrared Imager and Slitless Spectrograph for the James Webb Space Telescope. III. Single Object Slitless Spectroscopy
The Near Infrared Imager and Slitless Spectrograph instrument (NIRISS) is the Canadian Space Agency contribution to the suite of four science instruments of the James Webb Space Telescope. As one of the three NIRISS observing modes, the Single Object Slitless Spectroscopy (SOSS) mode is tailor-made to undertake time-series observations of exoplanets to perform transit spectroscopy. The SOSS permits observing point sources between 0.6 and 2.8 μm at a resolving power of 650 at 1.25 μm using a slitless cross-dispersing grism while its defocussing cylindrical lens enables observing targets as bright as J = 6.7 by spreading light across 23 pixels along the cross-dispersion axis. This paper officially presents the design of the SOSS mode, its operation, characterization, and its performance, from ground-based testing and flight-based commissioning. On-sky measurements demonstrate a peak photon conversion efficiency of 55% at 1.2 μm. The first time series on the A-type star BD+60°1753 achieves a flux stability close to the photon-noise limit, so far tested to a level of 20 parts per million on a 40 minute timescale after simply subtracting a long-term trend. Uncorrected 1/f noise residuals underneath the spectral traces add an extra source of noise equivalent to doubling the readout noise. Preliminary analysis of an HAT-P-14b transit time series indicates that it is difficult to remove all of the noise in pixels with partially saturated ramps. Overall, the SOSS delivers performance at the level required to tackle key exoplanetary science programs such as detecting secondary atmospheres on terrestrial planets and measuring abundances of several chemical species in gas giants.
- Open Access
The Near Infrared Imager and Slitless Spectrograph for the James Webb Space Telescope -- III. Single Object Slitless Spectroscopy
The Near Infrared Imager and Slitless Spectrograph instrument (NIRISS) is the Canadian Space Agency (CSA) contribution to the suite of four science instruments of JWST. As one of the three NIRISS observing modes, the Single Object Slitless Spectroscopy (SOSS) mode is tailor-made to undertake time-series observations of exoplanets to perform transit spectroscopy. The SOSS permits observing point sources between 0.6 and 2.8 um at a resolving power of 650 at 1.25 um using a slit-less cross-dispersing grism while its defocussing cylindrical lens enables observing targets as bright as J=6.7 by spreading light across 23 pixels along the cross-dispersion axis. This paper officially presents the design of the SOSS mode, its operation, characterization, and its performance, from ground-based testing and flight-based Commissioning. On-sky measurements demonstrate a peak photon conversion efficiency of 55% at 1.2 um. The first time-series on the A-type star BD+60o1753 achieves a flux stability close to the photon-noise limit, so far tested to a level of 20 parts per million on 40-minute time-scales after simply subtracting a long-term trend. Uncorrected 1/f noise residuals underneath the spectral traces add an extra source of noise equivalent to doubling the readout noise. Preliminary analysis of a HAT-P-14b transit time-series indicates that it is difficult to remove all the noise in pixels with partially saturated ramps. Overall, the SOSS delivers performance at the level required to tackle key exoplanet science programs such as detecting secondary atmospheres on terrestrial planets and measuring abundances of several chemical species in gas giants.
Open AccessThe Near Infrared Imager and Slitless Spectrograph for the James Webb Space Telescope -- III. Single Object Slitless Spectroscopy
The Near Infrared Imager and Slitless Spectrograph instrument (NIRISS) is the Canadian Space Agency (CSA) contribution to the suite of four science instruments of JWST. As one of the three NIRISS observing modes, the Single Object Slitless Spectroscopy (SOSS) mode is tailor-made to undertake time-series observations of exoplanets to perform transit spectroscopy. The SOSS permits observing point sources between 0.6 and 2.8 um at a resolving power of 650 at 1.25 um using a slit-less cross-dispersing grism while its defocussing cylindrical lens enables observing targets as bright as J=6.7 by spreading light across 23 pixels along the cross-dispersion axis. This paper officially presents the design of the SOSS mode, its operation, characterization, and its performance, from ground-based testing and flight-based Commissioning. On-sky measurements demonstrate a peak photon conversion efficiency of 55% at 1.2 um. The first time-series on the A-type star BD+60o1753 achieves a flux stability close to the photon-noise limit, so far tested to a level of 20 parts per million on 40-minute time-scales after simply subtracting a long-term trend. Uncorrected 1/f noise residuals underneath the spectral traces add an extra source of noise equivalent to doubling the readout noise. Preliminary analysis of a HAT-P-14b transit time-series indicates that it is difficult to remove all the noise in pixels with partially saturated ramps. Overall, the SOSS delivers performance at the level required to tackle key exoplanet science programs such as detecting secondary atmospheres on terrestrial planets and measuring abundances of several chemical species in gas giants.
- Top Cited PapersOpen Access
- 1 June 2023
- Published by IOP Publishing in Publications of the Astronomical Society of the Pacific
- Vol. 135 (1048) , 068001
The James Webb Space Telescope Mission
Twenty-six years ago a small committee report, building on earlier studies, expounded a compelling and poetic vision for the future of astronomy, calling for an infrared-optimized space telescope with an aperture of at least 4 m. With the support of their governments in the US, Europe, and Canada, 20,000 people realized that vision as the 6.5 m James Webb Space Telescope. A generation of astronomers will celebrate their accomplishments for the life of the mission, potentially as long as 20 yr, and beyond. This report and the scientific discoveries that follow are extended thank-you notes to the 20,000 team members. The telescope is working perfectly, with much better image quality than expected. In this and accompanying papers, we give a brief history, describe the observatory, outline its objectives and current observing program, and discuss the inventions and people who made it possible. We cite detailed reports on the design and the measured performance on orbit.
- 1 June 2023
- Published by IOP Publishing in Publications of the Astronomical Society of the Pacific
- Vol. 135 (1048) , 068001
Top Cited PapersOpen AccessThe James Webb Space Telescope Mission
Twenty-six years ago a small committee report, building on earlier studies, expounded a compelling and poetic vision for the future of astronomy, calling for an infrared-optimized space telescope with an aperture of at least 4 m. With the support of their governments in the US, Europe, and Canada, 20,000 people realized that vision as the 6.5 m James Webb Space Telescope. A generation of astronomers will celebrate their accomplishments for the life of the mission, potentially as long as 20 yr, and beyond. This report and the scientific discoveries that follow are extended thank-you notes to the 20,000 team members. The telescope is working perfectly, with much better image quality than expected. In this and accompanying papers, we give a brief history, describe the observatory, outline its objectives and current observing program, and discuss the inventions and people who made it possible. We cite detailed reports on the design and the measured performance on orbit.
- 11 April 2023
- Published by Oxford University Press (OUP) in Monthly Notices of the Royal Astronomical Society
- Vol. 525 (2) , 1867-1884
The first large catalogue of spectroscopic redshifts in Webb’s first deep field, SMACS J0723.3−7327
We present a spectroscopic redshift catalogue of the SMACS J0723.3−7327 field (‘Webb’s First Deep Field’) obtained from JWST/NIRISS grism spectroscopy and supplemented with JWST/NIRSpec and VLT/MUSE redshifts. The catalogue contains a total of 190 sources with secure spectroscopic redshifts, including 156 NIRISS grism redshifts, 123 of which are for sources whose redshifts were previously unknown. These new grism redshifts are secured with two or more spectroscopic features (64 sources), or with a single spectral feature whose identity is secured from the object’s nine-band photometric redshift (59 sources). These are complemented with 17 NIRSpec and 48 MUSE redshifts, including six new NIRSpec redshifts identified in this work. In addition to the zcl = 0.39 cluster galaxy redshifts (for which we provide ∼40 new NIRISS absorption-line redshifts), we also find three prominent galaxy overdensities at higher redshifts – at z = 1.1, z = 1.4, and z = 2.0 – that were until now not seen in the JWST/NIRSpec and VLT/MUSE data. The paper describes the characteristics of our spectroscopic redshift sample and the methodology we have employed to obtain it. Our redshift catalogue is made available to the community at https://niriss.github.io/smacs0723.
- 11 April 2023
- Published by Oxford University Press (OUP) in Monthly Notices of the Royal Astronomical Society
- Vol. 525 (2) , 1867-1884
The first large catalogue of spectroscopic redshifts in Webb’s first deep field, SMACS J0723.3−7327
We present a spectroscopic redshift catalogue of the SMACS J0723.3−7327 field (‘Webb’s First Deep Field’) obtained from JWST/NIRISS grism spectroscopy and supplemented with JWST/NIRSpec and VLT/MUSE redshifts. The catalogue contains a total of 190 sources with secure spectroscopic redshifts, including 156 NIRISS grism redshifts, 123 of which are for sources whose redshifts were previously unknown. These new grism redshifts are secured with two or more spectroscopic features (64 sources), or with a single spectral feature whose identity is secured from the object’s nine-band photometric redshift (59 sources). These are complemented with 17 NIRSpec and 48 MUSE redshifts, including six new NIRSpec redshifts identified in this work. In addition to the zcl = 0.39 cluster galaxy redshifts (for which we provide ∼40 new NIRISS absorption-line redshifts), we also find three prominent galaxy overdensities at higher redshifts – at z = 1.1, z = 1.4, and z = 2.0 – that were until now not seen in the JWST/NIRSpec and VLT/MUSE data. The paper describes the characteristics of our spectroscopic redshift sample and the methodology we have employed to obtain it. Our redshift catalogue is made available to the community at https://niriss.github.io/smacs0723.
- Open Access
The first large catalogue of spectroscopic redshifts in Webb's First Deep Field, SMACS J0723.3$-$7327
We present a spectroscopic redshift catalogue of the SMACS J0723.3$-$7327 field ("Webb's First Deep Field") obtained from JWST/NIRISS grism spectroscopy and supplemented with JWST/NIRSpec and VLT/MUSE redshifts. The catalogue contains a total of 190 sources with secure spectroscopic redshifts, including 156 NIRISS grism redshifts, 123 of which are for sources whose redshifts were previously unknown. These new grism redshifts are secured with two or more spectroscopic features (64 sources), or with a single spectral feature whose identity is secured from the object's nine-band photometric redshift (59 sources). These are complemented with 17 NIRSpec and 48 MUSE redshifts, including six new NIRSpec redshifts identified in this work. In addition to the $z_{\rm cl}=0.39$ cluster galaxy redshifts (for which we provide $\sim$40 new NIRISS absorption-line redshifts), we also find three prominent galaxy overdensities at higher redshifts - at $z=1.1$, $z=1.4$, and $z=2.0$ - that were until now not seen in the JWST/NIRSpec and VLT/MUSE data. The paper describes the characteristics of our spectroscopic redshift sample and the methodology we have employed to obtain it. Our redshift catalogue is made available to the community at https://niriss.github.io/smacs0723.Open AccessThe first large catalogue of spectroscopic redshifts in Webb's First Deep Field, SMACS J0723.3$-$7327
We present a spectroscopic redshift catalogue of the SMACS J0723.3$-$7327 field ("Webb's First Deep Field") obtained from JWST/NIRISS grism spectroscopy and supplemented with JWST/NIRSpec and VLT/MUSE redshifts. The catalogue contains a total of 190 sources with secure spectroscopic redshifts, including 156 NIRISS grism redshifts, 123 of which are for sources whose redshifts were previously unknown. These new grism redshifts are secured with two or more spectroscopic features (64 sources), or with a single spectral feature whose identity is secured from the object's nine-band photometric redshift (59 sources). These are complemented with 17 NIRSpec and 48 MUSE redshifts, including six new NIRSpec redshifts identified in this work. In addition to the $z_{\rm cl}=0.39$ cluster galaxy redshifts (for which we provide $\sim$40 new NIRISS absorption-line redshifts), we also find three prominent galaxy overdensities at higher redshifts - at $z=1.1$, $z=1.4$, and $z=2.0$ - that were until now not seen in the JWST/NIRSpec and VLT/MUSE data. The paper describes the characteristics of our spectroscopic redshift sample and the methodology we have employed to obtain it. Our redshift catalogue is made available to the community at https://niriss.github.io/smacs0723. - 1 January 2023
- Published by IOP Publishing in Publications of the Astronomical Society of the Pacific
- Vol. 135 (1043) , 015003
The Near Infrared Imager and Slitless Spectrograph for the James Webb Space Telescope. IV. Aperture Masking Interferometry
The James Webb Space Telescope’s Near Infrared Imager and Slitless Spectrograph (JWST-NIRISS) flies a 7-hole non-redundant mask (NRM), the first such interferometer in space, operating at 3–5 μm wavelengths, and a bright limit of ≃4 mag in W2. We describe the NIRISS Aperture Masking Interferometry (AMI) mode to help potential observers understand its underlying principles, present some sample science cases, explain its operational observing strategies, indicate how AMI proposals can be developed with data simulations, and how AMI data can be analyzed. We also present key results from commissioning AMI. Since the allied Kernel Phase Imaging (KPI) technique benefits from AMI operational strategies, we also cover NIRISS KPI methods and analysis techniques, including a new user-friendly KPI pipeline. The NIRISS KPI bright limit is ≃8 W2 (4.6 μm) magnitudes. AMI NRM and KPI achieve an inner working angle of ∼70 mas, which is well inside the ∼400 mas NIRCam inner working angle for its circular occulter coronagraphs at comparable wavelengths.
- 1 January 2023
- Published by IOP Publishing in Publications of the Astronomical Society of the Pacific
- Vol. 135 (1043) , 015003
The Near Infrared Imager and Slitless Spectrograph for the James Webb Space Telescope. IV. Aperture Masking Interferometry
The James Webb Space Telescope’s Near Infrared Imager and Slitless Spectrograph (JWST-NIRISS) flies a 7-hole non-redundant mask (NRM), the first such interferometer in space, operating at 3–5 μm wavelengths, and a bright limit of ≃4 mag in W2. We describe the NIRISS Aperture Masking Interferometry (AMI) mode to help potential observers understand its underlying principles, present some sample science cases, explain its operational observing strategies, indicate how AMI proposals can be developed with data simulations, and how AMI data can be analyzed. We also present key results from commissioning AMI. Since the allied Kernel Phase Imaging (KPI) technique benefits from AMI operational strategies, we also cover NIRISS KPI methods and analysis techniques, including a new user-friendly KPI pipeline. The NIRISS KPI bright limit is ≃8 W2 (4.6 μm) magnitudes. AMI NRM and KPI achieve an inner working angle of ∼70 mas, which is well inside the ∼400 mas NIRCam inner working angle for its circular occulter coronagraphs at comparable wavelengths.
- Open Access
The Near Infrared Imager and Slitless Spectrograph for the James Webb Space Telescope -- IV. Aperture Masking Interferometry
The James Webb Space Telescope's Near Infrared Imager and Slitless Spectrograph (JWST-NIRISS) flies a 7-hole non-redundant mask (NRM), the first such interferometer in space, operating at 3-5 \micron~wavelengths, and a bright limit of $\simeq 4$ magnitudes in W2. We describe the NIRISS Aperture Masking Interferometry (AMI) mode to help potential observers understand its underlying principles, present some sample science cases, explain its operational observing strategies, indicate how AMI proposals can be developed with data simulations, and how AMI data can be analyzed. We also present key results from commissioning AMI. Since the allied Kernel Phase Imaging (KPI) technique benefits from AMI operational strategies, we also cover NIRISS KPI methods and analysis techniques, including a new user-friendly KPI pipeline. The NIRISS KPI bright limit is $\simeq 8$ W2 magnitudes. AMI (and KPI) achieve an inner working angle of $\sim 70$ mas that is well inside the $\sim 400$ mas NIRCam inner working angle for its circular occulter coronagraphs at comparable wavelengths.Open AccessThe Near Infrared Imager and Slitless Spectrograph for the James Webb Space Telescope -- IV. Aperture Masking Interferometry
The James Webb Space Telescope's Near Infrared Imager and Slitless Spectrograph (JWST-NIRISS) flies a 7-hole non-redundant mask (NRM), the first such interferometer in space, operating at 3-5 \micron~wavelengths, and a bright limit of $\simeq 4$ magnitudes in W2. We describe the NIRISS Aperture Masking Interferometry (AMI) mode to help potential observers understand its underlying principles, present some sample science cases, explain its operational observing strategies, indicate how AMI proposals can be developed with data simulations, and how AMI data can be analyzed. We also present key results from commissioning AMI. Since the allied Kernel Phase Imaging (KPI) technique benefits from AMI operational strategies, we also cover NIRISS KPI methods and analysis techniques, including a new user-friendly KPI pipeline. The NIRISS KPI bright limit is $\simeq 8$ W2 magnitudes. AMI (and KPI) achieve an inner working angle of $\sim 70$ mas that is well inside the $\sim 400$ mas NIRCam inner working angle for its circular occulter coronagraphs at comparable wavelengths. - Top Cited PapersOpen Access
- 1 February 2022
- Published by IOP Publishing in Publications of the Astronomical Society of the Pacific
- Vol. 134 (1032) , 025002
The Near-infrared Imager and Slitless Spectrograph for the James Webb Space Telescope. II. Wide Field Slitless Spectroscopy
We present the wide field slitless spectroscopy mode of the NIRISS instrument on the James Webb Space Telescope. This mode employs two orthogonal low-resolution (resolving power ≈150) grisms in combination with a set of six blocking filters in the wavelength range 0.8–2.3 μm to provide a spectrum of almost every source across the field-of-view. When combined with the low background, high sensitivity and high spatial resolution afforded by the telescope, this mode will enable unprecedented studies of the structure and evolution of distant galaxies. We describe the performance of the as-built hardware relevant to this mode and expected imaging and spectroscopic sensitivity. We discuss operational and calibration procedures to obtain the highest quality data. As examples of the observing mode usage, we present details of two planned Guaranteed Time Observations programs: The Canadian NIRISS Unbiased Cluster Survey and The NIRISS Survey for Young Brown Dwarfs and Rogue Planets.
- 1 February 2022
- Published by IOP Publishing in Publications of the Astronomical Society of the Pacific
- Vol. 134 (1032) , 025002
Top Cited PapersOpen AccessThe Near-infrared Imager and Slitless Spectrograph for the James Webb Space Telescope. II. Wide Field Slitless Spectroscopy
We present the wide field slitless spectroscopy mode of the NIRISS instrument on the James Webb Space Telescope. This mode employs two orthogonal low-resolution (resolving power ≈150) grisms in combination with a set of six blocking filters in the wavelength range 0.8–2.3 μm to provide a spectrum of almost every source across the field-of-view. When combined with the low background, high sensitivity and high spatial resolution afforded by the telescope, this mode will enable unprecedented studies of the structure and evolution of distant galaxies. We describe the performance of the as-built hardware relevant to this mode and expected imaging and spectroscopic sensitivity. We discuss operational and calibration procedures to obtain the highest quality data. As examples of the observing mode usage, we present details of two planned Guaranteed Time Observations programs: The Canadian NIRISS Unbiased Cluster Survey and The NIRISS Survey for Young Brown Dwarfs and Rogue Planets.
- 20 July 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10709, 107090D-13
Ultraviolet sensitivity of a teledyne-e2v EMCCD
Electron multiplying charged coupled devices (EMCCD’s) can provide significantly greater signal to noise ratios in low light conditions and/or for higher speed readout than traditional CCDs. Due to the electron multiplication before readout, the effective readout noise can be at the sub-electron level, enabling single photon counting. Traditional far UV (150 – 200 nm) imaging detectors have utilized micro-channel plates to detect usually scarce UV photons at low efficiency, amplify them into electron showers which strike a phosphor, allowing a silicon detector array to perform the final detection of the resulting visible light pulse. The typical efficiencies of UV photo detection with MCP systems ranges from a low of a few percent to as high as 25%. Given that the theoretical probability of absorption of UV photons in silicon is at least 30% in this wavelength range, then it should be possible to make use of a photon counting EMCCD to directly detect UV photons that is competitive with MCP performance. We approached Teledyne-e2v and they confirmed that a backside thinned EMCCD with their ‘astro no-coat’ process should provide reasonable quantum efficiency (ie. > 30%) in this range. The primary application in which we are interested is UV imaging of the aurora from space-based platforms. In this application there are system level advantages to replacing an MCP based detector with an EMCCD which is directly sensitive to UV illumination, namely the elimination of a high voltage power supply and higher spatial resolution. An MCP produces an electron shower which degrades image quality and also requires a relatively thick detector window which has to be accommodated in the imager optical design. We acquired five CCD201 engineering model EMCCDs with e2v’s ‘astro no-coat’ process, and incorporated one of these into a standard flexible liquid nitrogen cooled EMCCD camera produced by Nüvü Camēras. Once installed the EMCCD operation was confirmed with standard Nüvü Camēras test procedures. The camera was then mounted in a test vacuum chamber along with a McPherson UV monochromator so that the UV performance could be assessed. A NIST traceable photodiode was used for the absolute calibration. The resulting intrinsic QE was found to be 34% at 180 nm rising to 44% at 150 nm. The quantum yield was found to be quite low, only a few percent at 180 nm rising to only 1.13-1.18 at 150 nm. This is considerably lower than comparable results from CCDs where delta-doping has been used to improve the responsive quantum efficiency and also lower than a Teledyne-e2v CMOS sensor with the same surface treatment.
- 20 July 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10709, 107090D-13
Ultraviolet sensitivity of a teledyne-e2v EMCCD
Electron multiplying charged coupled devices (EMCCD’s) can provide significantly greater signal to noise ratios in low light conditions and/or for higher speed readout than traditional CCDs. Due to the electron multiplication before readout, the effective readout noise can be at the sub-electron level, enabling single photon counting. Traditional far UV (150 – 200 nm) imaging detectors have utilized micro-channel plates to detect usually scarce UV photons at low efficiency, amplify them into electron showers which strike a phosphor, allowing a silicon detector array to perform the final detection of the resulting visible light pulse. The typical efficiencies of UV photo detection with MCP systems ranges from a low of a few percent to as high as 25%. Given that the theoretical probability of absorption of UV photons in silicon is at least 30% in this wavelength range, then it should be possible to make use of a photon counting EMCCD to directly detect UV photons that is competitive with MCP performance. We approached Teledyne-e2v and they confirmed that a backside thinned EMCCD with their ‘astro no-coat’ process should provide reasonable quantum efficiency (ie. > 30%) in this range. The primary application in which we are interested is UV imaging of the aurora from space-based platforms. In this application there are system level advantages to replacing an MCP based detector with an EMCCD which is directly sensitive to UV illumination, namely the elimination of a high voltage power supply and higher spatial resolution. An MCP produces an electron shower which degrades image quality and also requires a relatively thick detector window which has to be accommodated in the imager optical design. We acquired five CCD201 engineering model EMCCDs with e2v’s ‘astro no-coat’ process, and incorporated one of these into a standard flexible liquid nitrogen cooled EMCCD camera produced by Nüvü Camēras. Once installed the EMCCD operation was confirmed with standard Nüvü Camēras test procedures. The camera was then mounted in a test vacuum chamber along with a McPherson UV monochromator so that the UV performance could be assessed. A NIST traceable photodiode was used for the absolute calibration. The resulting intrinsic QE was found to be 34% at 180 nm rising to 44% at 150 nm. The quantum yield was found to be quite low, only a few percent at 180 nm rising to only 1.13-1.18 at 150 nm. This is considerably lower than comparable results from CCDs where delta-doping has been used to improve the responsive quantum efficiency and also lower than a Teledyne-e2v CMOS sensor with the same surface treatment.