YFYinian Feng

Yinian Feng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yinian Feng has a total of 32 co-authors. Here are the top co-authors by number of shared publications:

  • Bo Zhang

    University of Electronic Science and Technology of China

    13 shared publications
  • Zhongqian Niu

    School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu, China

    12 shared publications
  • Yong Fan

    EHF Key Laboratory of Fundamental Science, School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China

    7 shared publications
  • Yong Fan

    School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu, China

    5 shared publications
  • Bingli Dai

    School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu, China

    4 shared publications
  • Yang Liu

    School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu, China

    4 shared publications

Latest Publications

  • Ka-Band Waveguide Bandpass Filters Using Double-Layer Grounded Spoof Surface Plasmon Polaritons

    by Yinian Feng, Kai-Da Xu, Zhongqian Niu, Bo Zhang, Lujie Liu, Yong Fan

    In this article, a new design method of waveguide bandpass filters (BPFs) using spoof surface plasmon polaritons (SSPPs) is proposed based on the double-layer grounded (DLG) technology. Two-layer metallic strips of the SSPP unit cells are coated on dielectric substrate and grounded to the rectangular waveguide (RWG) wall, where the substrate is inserted into the $E$ -plane of RWG. Due to the DLG structure, the capacitance coupling between two layers is introduced, and consequently the bandpass filtering responses are realized by the SSPP itself. For validation, two different types of Ka-band DLG-SSPP waveguide BPFs are presented and discussed. Their corresponding unit cells’ equivalent circuit models are extracted to clarify the filtering characteristics and transmission zero (TZ) generation. The electromagnetic (EM) simulation results show that the center frequency can be flexibly controlled by adjusting the groove length. Furthermore, in order to control the upper cutoff frequency independently, an improved structure of DLG-SSPP unit cell with central patch is also proposed. To demonstrate and verify the design feasibility, three examples of waveguide BPFs are fabricated. Good agreement between measured and simulated results show that the proposed idea will be a good candidate for the waveguide BPF design with compact size and flexibly tuning ability.


  • WR-4 Band Wideband Waveguide Diplexer Based on Spoof Surface Plasmon Polaritons and Its Application in Terahertz Communications

    by Yinian Feng, Kai-Da Xu, Zhongqian Niu, Lujie Liu, Bo Zhang, Yong Fan

    In this article, a wideband diplexer is proposed based on spoof surface plasmon polaritons (SSPPs). The dispersion properties of the SSPP unit cell are analyzed, which shows that the upper/lower cutoff frequency and the bandwidth of the channel filter can be flexibly controlled. Based on the proposed SSPP-based bandpass filter (BPF), a WR-4 band wideband diplexer is further developed by the space-mapping technique, which is used to achieve high computational efficiency and design accuracy. For demonstration, two SSPP-based channel BPFs and the proposed diplexer are fabricated by high-precision computer numerical control (CNC) milling technology. The measured results show that the average insertion losses (ILs) of two BPFs are 1.6 and 2.4 dB, respectively, and the return losses are both better than 17 dB. Meanwhile, the measured 3-dB bandwidth of the proposed diplexer is 174–204 GHz and 225–255 GHz for two channels. The average ILs are 1.8 and 2.7 dB within the passbands of two channels, and the corresponding return losses are both better than 16 dB, which are all in good agreement with the simulated ones. Furthermore, a WR-4 band dual-carrier wireless link is built based on the proposed diplexer for future 6G terahertz (THz) communications. The corresponding real-time date rate is 41.6 Gbps for the proposed wireless link and the transmission distance is up to 3 km.


  • Misaligned Waveguide-Based Branch Waveguide Structure for Amplitude Imbalance Improvement in Branch-Guide Coupler

    by Bingli Dai, Bo Zhang, Yuchi Zhang, Jun Yuan, Yinian Feng, Zhongqian Niu, Yong Fan

    This study proposes a novel branch waveguide structure based on the misaligned waveguides (MWs). The design attains asymmetry by incorporating an offset within the branch waveguide, facilitating the excitation of the TE $_{201}$ mode Introducing the TE $_{201}$ mode yields a transmission zero (TZ) that can significantly improve amplitude imbalance. The position of the TZ is related to the coupling strength of the TE $_{201}$ mode, which can be flexibly controlled using the offsets. Furthermore, the proposed branch waveguide structure introduces only one additional design parameter compared to the conventional configuration and eliminates the need for extra chamfers, simplifying the design and fabrication processes. This distinct branch waveguide structure establishes the foundation for designing ultrawideband branch-guide couplers (BGCs) with low amplitude imbalance. We validate the design principles by designing, fabricating, and testing an eight-branch 3-dB BGC prototype operating in the $V$ -band. Measurements over 50–72 GHz (with a fractional bandwidth of 36%) demonstrate the amplitude and phase imbalances of less than 0.4 dB and 2.7 $^{\circ}$ , respectively. In addition, the return loss and isolation exceed 20 dB, closely agreeing with simulations.


  • Design of a 300GHz Cross-coupled Waveguide Filter

    by Xinyue Fang, Bo Zhang, Zhongqian Niu, Yinian Feng

    In this paper, a 300GHz band-pass filter is designed with cross-coupled structure and waveguide. The initial waveguide is given by the synthesis of the coupled matrix, then the design of the filter is realized by optimizing the electromagnetic model in HFSS. Simulation results show that the filter’s bandwidth is 7.5 GHz, the return loss is less than 22dB, and the insertion loss in the band is less than 1.5dB. The two transmission zeros are located at 288GHz and 310GHz, which makes the S 21 curve steeper near the passband and improve the filter’s out-of-band rejection.

  • A New Design for Improving Amplitude Imbalance of Branch-Guide Coupler Utilizing Branch Structure With Dual Transmission Zeros

    by Bingli Dai, Bo Zhang, Yuchi Zhang, Ming Guan, Zhongqian Niu, Yinian Feng, Yang Liu, Yong Fan

    This article presents a new design for improving the amplitude imbalance of the branch-guide coupler (BGC) using a novel branch structure. This basic structure consists of a main TE $_{301}$ mode cavity loaded with an $E$ -plane stub, which is located in the middle of the main cavity and can be considered as a TM $_{110}$ mode cavity. Through analysis, it is found that this new topology will provide two transmission zeros (TZs), and the positions of the TZs can be independently controlled. Further, the amplitude imbalance of the BGC is greatly improved because of the existence of high-and low-frequency TZs. To verify the design concept for loose-and tight-coupling applications, 10 dB 4-branch and 3 dB 7-branch prototypes are designed, processed, and measured. The measurements show that the 4-branch BGC achieves a coupling of approximately 10.3 dB with $\pm$ 0.2 dB variation over the full $D$ -band, and the return loss (RL) and isolation are greater than 20 dB. Furthermore, the measurements of the 3 dB 7-branch BGC show that, over the full $D$ -band, the RL and isolation are greater than 20 dB, and the amplitude and phase imbalance are less than 0.3 dB and $\pm$ 2.2 $^{\circ}$ , respectively. The measurements and simulations are in excellent agreement. To the best of the authors’ knowledge, these are the full-band BGCs with the lowest amplitude imbalance proposed to date. Therefore, the proposed BGCs have significant potential for application in ultrawideband millimeter-wave and submillimeter-wave waveguide systems.


  • A Novel 180–210 GHz Single Sideband Mixer Using Filtering Waveguide-Microstrip Transition Structure

    by Yang Liu, Bo Zhang, Zhongqian Niu, Yinian Feng, Yong Fan

    In this letter, we proposed a novel 180–210 GHz single sideband (SSB) Schottky diode-based subharmonic mixer (SHM), which features in simpler structure and fabrication compared with existing methods. Image rejection of the 220–250 GHz upper sideband (USB), as well as impedance matching, was achieved by a filtering waveguide-microstrip transition structure at the radio frequency (RF) input, rather than using traditional waveguide filters. Eventually, the mixer was measured to show great performance, including a SSB conversion loss (CL) of 8–12 dB across the passband, and an image rejection ratio (IRR) of 15–35 dB.


  • 170–260-GHz Ultrawideband and High Isolation Orthomode Transducer Based on Symmetric Reverse Coupling Structure

    by Jicong Zhang, Bo Zhang, Hegang Deng, Bingli Dai, Xiaoming Chen, Zhongqian Niu, Yinian Feng, Yong Fan

    In this article, we propose a novel ultrawideband orthomode transducer (OMT) with high isolation. This novel OMT is designed based on a symmetric reverse coupling structure, which employs two forms of double ridges to replace the pillars or septums that are difficult to process. In this way, the OMT achieves simpler double symmetry structure with higher tolerance capability and lower processing difficulty. In addition, the impedance-matching characteristics within the waveguide are optimized by the symmetrical double-ridged structure, allowing wider bandwidth and higher isolation to be obtained than in conventional structures. To confirm the theoretical results, a WR-4.3 full-band OMT was processed by computer numerical control (CNC) milling technology with 10- $\mu $ m precision. Measurement results show that in the 170–260 GHz range, the average return loss (RL) is 24 dB, the average insertion loss (IL) is 0.6 dB, and the average isolation is 54 dB. The measured results are strongly in agreement with the simulation results.


  • A W-Band E-Plane Waveguide In-Phase Power Divider With Full Bandwidth and High Isolation

    by Bingli Dai, Bo Zhang, Zhongqian Niu, Yinian Feng, Yang Liu, Yong Fan

    In this letter, a new two-way E-plane waveguide in-phase power divider (PD) with high port-port isolation operating in full W-band is proposed. This architecture is based on the classical six-port branch guide coupling principle, and consists of one input port, two output ports, and three isolation ports. To overcome the inherent tradeoff between fractional bandwidth and processing difficulty, a novel rectangular cavity coupling structure with greater waveguide width has been proposed. By analyzing, it is found that this novel layout allows broadband isolation and larger branch height which greatly eases the fabrication. Finally, an eight-branch prototype at W-band is designed, fabricated, and measured. In full W-band, the return loss is better than 20 dB and the isolation is better than 25 dB. The amplitude and phase imbalance between two output ports are less than $\pm$ 0.4 dB and $\pm$ 3.6 $^{\circ}$ , respectively. The simulated and measured results are in good agreement.


  • A D-Band Manifold Triplexer With High Isolation Utilizing Novel Waveguide Dual-Mode Filters

    by Yinian Feng, Bo Zhang, Yang Liu, Zhongqian Niu, Yong Fan, Xiaodong Chen

    This letter presents our design of a wideband manifold-coupled triplexer with high isolation in D band. The basic structure of channel filters is the novel TM 120 and TE 101 dual-mode cavity, which provide two reflection zeros and one transmission zero (TZ). To achieve good computational efficiency and design accuracy, the space-mapping technique, consists of a coarse distribute model and a fine full-wave electromagnetic (EM) model, is adopted in the development of the triplexer. The proposed triplexer is fabricated by high-precision computer numerical control (CNC) milling technology. The measured results are all in good agreement with the simulated ones. The measured lowest in-band insertion loss is 0.54/0.62/0.55 dB for three channels, respectively. The return loss of each channel is better than 14 dB and the isolation between each channel is better than 45 dB.


  • A Novel Ultrawideband Branch Waveguide Coupler With Low Amplitude Imbalance

    by Bingli Dai, Bo Zhang, Zhongqian Niu, Yinian Feng, Yang Liu, Yong Fan

    In this article, we present a novel ultrawideband branch waveguide coupler (BWC) with low amplitude imbalance. This novel design is based on a new structure of branch waveguide obtained by symmetrically increasing the waveguide width. The coupling degree can be independently controlled by the height and width of the new branch waveguide, which significantly increases the design flexibility. In addition, this structure can produce a transmission zero (TZ), and a concept to improve the fractional bandwidth of the BWC with out-of-band TZ is proposed. Based on the analysis, the design guidelines for the novel BWC are provided. For a given center frequency, an n-branch novel BWC can be easily designed. Moreover, because of the larger branch waveguide height, this novel design has greatly eased the machining difficulty. Finally, to verify the design concept, a $W$ -band eight-branch prototype is processed and measured. In full $W$ -band, the amplitude imbalance is less than 0.52 dB, the phase imbalance is less than 2.5 $^{\circ}$ , the return loss (RL) is greater than 21.4 dB, and the isolation is greater than 20.5 dB. The simulation and experimental results are in good agreement.