SWShuai Wei

Shuai Wei

*This is an algorithmically generated author record based on publicly available information.

Shuai Wei has a total of 59 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Disentangling Copper Speciation in Cu-CeO2 Catalysts by Chemical Subtraction for Methanol Steam Reforming

    by Wenzhu Yu, Shuai Wei, Naitao Yang, Lingling Guo, Xiuxia Meng, Haimei Wang

    Copper-ceria catalysts are effective for methanol steam reforming (MSR), but the real active Cu species remain ambiguous because dispersed CuOx clusters, Cu-Ox-Ce interfacial structures, and bulk-like CuO particles often coexist. Here, we report a leaching-enabled chemical-subtraction strategy to decouple the catalytic roles of different Cu species in Cu-CeO2 catalysts. By regulating Cu loading on CeO2 nanospheres, distinct Cu species were constructed, followed by ammonium carbonate leaching to remove weakly bound or aggregated CuO species. The catalysts showed high H2/CO2 selectivity with minimal CO formation. At 250 °C, 50CuCe delivered an H2 production rate of 0.23 molH2·gcat–1·h–1, while 50CuCe-L retained a comparable rate of 0.21 molH2·gcat–1·h–1 after substantial removal of CuO particles. In contrast, leaching decreased the H2 production rate of 5CuCe from 0.15 to 0.10 molH2·gcat–1·h–1, indicating partial removal of active dispersed/interfacial Cu species. These contrasting activity responses demonstrate that bulk-like CuO particles are largely spectator species, whereas highly dispersed CuOx and Cu-Ox-Ce interfacial ensembles are the real active components for MSR. The defect-mediated Cu-CeO2 interaction stabilizes these interfacial ensembles and enables methanol activation, H2O dissociation, and methoxy-to-formate conversion. This work shifts the design principle of Cu-CeO2 MSR catalysts from increasing total Cu loading to constructing stable, redox-active CuOx/Cu-Ox-Ce interfaces.

  • Cu-Al2O3-MgO catalyst for industrial water gas shift catalysis

    by Cong-Xiao Wang, Mei-Yao Wu, Shuai Wei, Shan-Qing Li, Hao-Xin Liu, Xin-Pu Fu, Wei-Wei Wang, Feng Ryan Wang, Chun-Jiang Jia


  • Open Access

    Cu-Al2O3-MgO catalyst for industrial water gas shift catalysis

    by Cong-Xiao Wang, Mei-Yao Wu, Shuai Wei, Shan-Qing Li, Hao-Xin Liu, Xin-Pu Fu, Wei-Wei Wang, Feng Ryan Wang, Chun-Jiang Jia

    The Cu-ZnO-Al2O3 catalyst, a benchmark material for the industrial water gas shift (WGS) reaction, features densely packed Cu particles, which not only limits the full utilization of the metallic components but also poses the spontaneous combustion risk due to its air sensitivity. In industrial WGS, high CO2/H2 reformate feeds can simultaneously promote Cu sintering and carbonate site-blocking, coupling durability to activity. Here we report a Cu-MgO-Al2O3 catalyst, synthesized via a scalable co-precipitation route akin to industrial practice, that overcome these challenges. Even at a high Cu loading of 23.6 wt.%, the catalyst stabilizes abundant nanometer sized Cu clusters, delivering WGS activity comparable to the commercial Cu-ZnO-Al2O3 catalyst while reducing material cost by approximately 63% and prevent self-ignition. The catalyst maintains exceptional durability for over 300 h of continuous operation. The high dispersion of Al atoms within the MgO lattice enhances the interaction with Cu species, which is crucial for stabilizing Cu clusters. Furthermore, Al doping suppresses CO2 adsorption on MgO, which mitigates carbonate accumulation and thereby promoting continuous exposure of active sites. These combined effects render Cu-MgO-Al2O3 a robust, cost-effective, and production-safe alternative to the conventional Cu-ZnO-Al2O3 catalyst for industrial hydrogen production.

  • Enhanced Formic Acid Dehydrogenation over Basic Site-Rich Pd/Al2O3 Hollow Sphere Catalyst

    by Shuai Wei, Hui Liang, Xuan Xu, Jun-Hao Hu, Yu Li, An-Qi Xu, Ye-Qiang Tang, Wen-Zhu Yu, Ling-Ling Guo, Peng Wang

    Formic acid (FA) is regarded as a safe and practical hydrogen carrier owing to its favorable storage and handling characteristics. However, achieving efficient and selective FA dehydrogenation under mild conditions remains a significant challenge. In this study, the decomposition pathway of FA was found to be highly dependent on the acid-base characteristics of the catalyst support, with basic surfaces preferentially favoring the dehydrogenation route. Therefore, a morphology-regulated strategy was developed to modulate the distribution of basic sites on alumina, revealing a direct structure-function relationship that governs the catalytic behavior. Al2O3 hollow spheres (HS), featuring abundant surface basicity, were synthesized via a hydrothermal method and used as supports for Pd catalysts alongside Al2O3 nanobelts (NB) and nanoparticles (NP). Mechanistic studies integrating catalytic evaluation, in situ DRIFTS, and CO2-TPD analyses demonstrated that the Pd/Al2O3-HS catalyst, owing to its support enriched in basic sites, simultaneously facilitates formate formation and promotes the generation of the Pd-HCOO* intermediate, thereby enhancing H2 production. This synergy results in superior catalytic performance (TOF = 4606 h-1) with no detectable CO formation. The increased basicity of the support markedly improved the hydrogen evolution during formic acid decomposition, highlighting a strong correlation between support basicity and catalytic efficiency.


  • Open Access

    Efficiency of H2 Production Influenced by CeO2 Content-Dependent Copper–Ceria Interaction

    by Wen-Qing Chen, Kai-Wen Wu, Jun-Hao Hu, Xuan Xu, Wen-Zhu Yu, Ling-Ling Guo, Shuai Wei

    The interaction between active sites and the support plays a crucial aspect in the methanol steam reforming (MSR) reaction, which often influences the dispersion states and concentration of surface oxygen vacancies (Ov). Here we report the fabrication of copper-ceria catalysts that contain different copper-ceria structures by adjusting the metal loading content. The Ce0.9Cu0.1O x catalyst shows a H2 production rate as high as 53.2 mLH2 ·gcat -1·min-1 at 250 °C, benefiting from the highly dispersed Cu species. When the Ce/Cu molar ratio is reduced further, the H2 production rate continues to decrease due to the agglomeration of Cu. However, Ov is another aspect of catalytic performance. The Ce0.1Cu0.9O x catalyst demonstrates an unexpected rise in the H2 production rate for its abundant Ov. Both the dispersion states of Cu species and the concentration of Ov are significant. Among them, the optimal Ce/Cu ratio is 1/9 for CO-free MSR, which is potentially beneficial in a clean H2 production area.


  • Metal-Free C60-Doped Mesoporous Carbon Nitride Drives Red-Light Photocatalysis

    by Peng Wang, Shuai Wei, Yanling Han, Suning Lin, Lijuan Zhang, Qian Li, Yan Xu, Lulu Lian, Yingmei Zhou, Ming Song, et al.

    The pursuit of novel strategies for synthesizing high-performance nanostructures of graphitic carbon nitride (g-C3N4) has garnered increasing scholarly attention in the field of photocatalysis. Herein, we have successfully designed a metal-free photocatalyst by integrating mesoporous carbon nitride (mpg-C3N4) and C60 through a straightforward and innovative method, marking the first instance of such an achievement. Under red light, the C60/mpg-C3N4 composite exhibited a significantly accelerated rhodamine B (RhB) photodecomposition rate, surpassing bulk g-C3N4 by more than 25.8 times and outperforming pure mpg-C3N4 by 7.8 times. The synergistic effect of C60 and the mesoporous structure significantly enhanced the photocatalytic performance of g-C3N4 by adjusting its electronic structure, broadening the light absorption range, increasing the active sites, and reducing the recombination of photogenerated carriers. This work presents a promising avenue for harnessing a metal-free, stable, efficient photocatalyst driven by red light, with potential for enhancing solar energy utilization in environmental remediation.


  • Silicalite zeolite-supported iron catalysts for enhancing isoparaffin selectivity from CO hydrogenation

    by Wuqiang Si, Xuangan Liu, Zhiren Xu, Chunyang Zeng, Mingquan Li, Chuang Xing, Bin Huang, Peng Wang, Yan Xu, Shuai Wei

    The Fischer–Tropsch synthesis (FTS) reaction is widely used to produce clean hydrocarbon fuels or chemicals. The key challenge for FTS is the control of product distributions. Herein, iron was employed as the active species, and the supported (Fe/S1 and Fe/S2) and encapsulated (Fe@S1 and Fe@S2) catalysts with pure siliceous zeolite were successfully prepared by incipient wetness impregnation and solvent-free hydrothermal method, respectively. The iron species encapsulated in silicalite zeolite, rather than being present on the surface, enhanced the acidity of zeolite, which was effective in regulating the FTS products. The acidic site can be divided into two types: Lewis and Brønsted, where the Brønsted acid sites are much more stable than Lewis acid sites at FTS reaction temperature. Moreover, Fe@S1 and Fe@S2 with much more Brønsted acid sites displayed a higher selectivity of isoparaffins in the FTS products compared to the supported catalysts (17.6% and 18.6% for Fe@S1 and Fe@S2 vs. 4.1% and 11.8% for Fe/S1 and Fe/S2, respectively). Thus, the acidity of silicalite zeolite can be regulated by encapsulating active metal in it, which is a promising prospect for tuning production distribution in FTS reactions.


  • Study on the Synergistic Catalysis of CeO2 Regulated Co0–Coδ+ Dual Sites for Direct Synthesis of Higher Alcohols from Syngas

    by Peng Wang, Shuai Wei, Kai Sun, Jing Li, Changchun He, Yan Xu, Xihua Du, Yisheng Tan, Yingquan Wu, Xinhua Gao


  • Metal-free in situ carbon-nanotube-modified mesoporous graphitic carbon nitride nanocomposite with enhanced visible light photocatalytic performance

    by Yan Chen, Li Tan, Hui Zhang, Xue Zhang, Qiyuan Chen, Haojie Jiang, Fengjuan Ge, Shuai Wei, Xinhua Gao, Peng Wang