Jiayi Wu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jiayi Wu has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Yufeng Shi
College of Civil Engineering, Nanjing Forestry University, Nanjing 210037, China
3 shared publications - Dong Chen
College of Civil Engineering, Nanjing Forestry University, Nanjing 210037, China
1 shared publication - Helong Wang
Nanjing Design & Research Institute Co., Ltd., China Coal Technology and Engineering Group, Nanjing 210037, China
1 shared publication - Helong Wang
Department of Geomatics, Nanjing Forestry University, Nanjing 210037, China
1 shared publication - Jinlong Teng
College of Civil Engineering, Nanjing Forestry University, Nanjing 210037, China
1 shared publication - Wei Cao
Department of Geomatics, Nanjing Forestry University, Nanjing 210037, China
1 shared publication
Latest Publications
- Open Access
- 15 April 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (8) , 2089
Surface Defect Detection of Nanjing City Wall Based on UAV Oblique Photogrammetry and TLS
Ancient architecture, with its long history, has a high cultural value, artistic achievement, and scientific value. The Nanjing City Wall was constructed in the mid-to-late 14th century, and it ranks first among the world’s city walls in terms of both length and size, whether historically or in the contemporary era. However, these sites are subject to long-term degradation and are sensitive to disturbances from the surrounding landscape, resulting in the potential deterioration of the architecture. Therefore, it is urgent to detect the defects and repair and protect Nanjing City Wall. In this paper, a novel method is proposed to detect the surface defects of the city walls by using the unmanned aerial vehicle (UAV) oblique photogrammetry and terrestrial laser scanning (TLS) data. On the one hand, the UAV oblique photogrammetry was used to collect the image data of the city wall, and a three-dimensional (3D) model of the wall was created using the oblique images. With this model, 43 cracks with lengths greater than 30 cm and 15 shedding surfaces with an area greater than 300 cm2 on the wall can be effectively detected. On the other hand, the point cloud data obtained by TLS were firstly preprocessed, and then, the KNN algorithm was used to construct a local neighborhood for each sampling point, and the neighborhood was fitted using the least squares method. Next, five features of the point cloud were calculated, and the results were visualized. Based on the visualization results, surface defects of the wall were identified, and 18 cracks with lengths greater than 30 cm and 5 shedding surfaces with an area greater than 300 cm2 on the wall were detected. To verify the accuracy of these two techniques in measuring cracks, the coordinates of some cracks were surveyed using a prism-free total station, and the lengths were calculated. The root mean square error (RMSE) of crack lengths based on the UAV oblique photogrammetry model and TLS point cloud model were calculated to be 0.73 cm and 0.34 cm, respectively. The results of the study showed that both techniques were able to detect the defects on the wall surface, and the measurement accuracy could meet the accuracy requirements of the surface defect detection of the city wall. Considering their low cost and high efficiency, these two techniques provide help for the mapping and conservation of historical buildings, which is of great significance for the conservation and repair of ancient buildings.
- 15 April 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (8) , 2089
Open AccessSurface Defect Detection of Nanjing City Wall Based on UAV Oblique Photogrammetry and TLS
Ancient architecture, with its long history, has a high cultural value, artistic achievement, and scientific value. The Nanjing City Wall was constructed in the mid-to-late 14th century, and it ranks first among the world’s city walls in terms of both length and size, whether historically or in the contemporary era. However, these sites are subject to long-term degradation and are sensitive to disturbances from the surrounding landscape, resulting in the potential deterioration of the architecture. Therefore, it is urgent to detect the defects and repair and protect Nanjing City Wall. In this paper, a novel method is proposed to detect the surface defects of the city walls by using the unmanned aerial vehicle (UAV) oblique photogrammetry and terrestrial laser scanning (TLS) data. On the one hand, the UAV oblique photogrammetry was used to collect the image data of the city wall, and a three-dimensional (3D) model of the wall was created using the oblique images. With this model, 43 cracks with lengths greater than 30 cm and 15 shedding surfaces with an area greater than 300 cm2 on the wall can be effectively detected. On the other hand, the point cloud data obtained by TLS were firstly preprocessed, and then, the KNN algorithm was used to construct a local neighborhood for each sampling point, and the neighborhood was fitted using the least squares method. Next, five features of the point cloud were calculated, and the results were visualized. Based on the visualization results, surface defects of the wall were identified, and 18 cracks with lengths greater than 30 cm and 5 shedding surfaces with an area greater than 300 cm2 on the wall were detected. To verify the accuracy of these two techniques in measuring cracks, the coordinates of some cracks were surveyed using a prism-free total station, and the lengths were calculated. The root mean square error (RMSE) of crack lengths based on the UAV oblique photogrammetry model and TLS point cloud model were calculated to be 0.73 cm and 0.34 cm, respectively. The results of the study showed that both techniques were able to detect the defects on the wall surface, and the measurement accuracy could meet the accuracy requirements of the surface defect detection of the city wall. Considering their low cost and high efficiency, these two techniques provide help for the mapping and conservation of historical buildings, which is of great significance for the conservation and repair of ancient buildings.
- Open Access
Review on the Research and Applications of TLS in Ground Surface and Constructions Deformation Monitoring
With the gradual maturity of the terrestrial laser scanners (TLS) technology, it is widely used in the field of deformation monitoring due to its fast, automated, and non-contact data acquisition capabilities. The TLS technology has changed the traditional deformation monitoring mode which relies on single-point monitoring. This paper analyzes the application of TLS in deformation monitoring, especially in the field of ground surface, dam, tunnel, and tall constructions. We divide the methods for obtaining ground surface deformation into two categories: the method based on point cloud distance and the method based on displacement field. The advantages and disadvantages of the four methods (M2M, C2C, C2M, M3C2) based on point cloud distance are analyzed and summarized. The deformation monitoring methods and precisions based on TLS for dams, tunnels, and tall constructions are summarized, as well as the various focuses of different monitoring objects. Additionally, their limitations and development directions in the corresponding fields are analyzed. The error sources of TLS point cloud data and error correction models are discussed. Finally, the limitations and future research directions of TLS in the field of deformation monitoring are presented in detail.
Open AccessReview on the Research and Applications of TLS in Ground Surface and Constructions Deformation Monitoring
With the gradual maturity of the terrestrial laser scanners (TLS) technology, it is widely used in the field of deformation monitoring due to its fast, automated, and non-contact data acquisition capabilities. The TLS technology has changed the traditional deformation monitoring mode which relies on single-point monitoring. This paper analyzes the application of TLS in deformation monitoring, especially in the field of ground surface, dam, tunnel, and tall constructions. We divide the methods for obtaining ground surface deformation into two categories: the method based on point cloud distance and the method based on displacement field. The advantages and disadvantages of the four methods (M2M, C2C, C2M, M3C2) based on point cloud distance are analyzed and summarized. The deformation monitoring methods and precisions based on TLS for dams, tunnels, and tall constructions are summarized, as well as the various focuses of different monitoring objects. Additionally, their limitations and development directions in the corresponding fields are analyzed. The error sources of TLS point cloud data and error correction models are discussed. Finally, the limitations and future research directions of TLS in the field of deformation monitoring are presented in detail.
- Open Access
- 10 March 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (6) , 1346
Restoration of Individual Tree Missing Point Cloud Based on Local Features of Point Cloud
LiDAR (Light Detection And Ranging) technology is an important means to obtain three-dimensional information of trees and vegetation. However, due to the influence of scanning mode, environmental occlusion and mutual occlusion between tree canopies and other factors, a tree point cloud often has different degrees of data loss, which affects the high-precision quantitative extraction of vegetation parameters. Aiming at the problem of a tree laser point cloud being missing, an individual tree incomplete point cloud restoration method based on local features of the point cloud is proposed. The L1-Median algorithm is used to extract key points of the tree skeleton, then the dominant direction of skeleton key points and local point cloud density are calculated, and the point cloud near the missing area is moved based on these features to gradually complete the incomplete point cloud compensation. The experimental results show that the above repair method can effectively repair the incomplete point cloud with good robustness and can adapt to the individual tree point cloud with different geometric structures and correct the branch topological connection errors.
- 10 March 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (6) , 1346
Open AccessRestoration of Individual Tree Missing Point Cloud Based on Local Features of Point Cloud
LiDAR (Light Detection And Ranging) technology is an important means to obtain three-dimensional information of trees and vegetation. However, due to the influence of scanning mode, environmental occlusion and mutual occlusion between tree canopies and other factors, a tree point cloud often has different degrees of data loss, which affects the high-precision quantitative extraction of vegetation parameters. Aiming at the problem of a tree laser point cloud being missing, an individual tree incomplete point cloud restoration method based on local features of the point cloud is proposed. The L1-Median algorithm is used to extract key points of the tree skeleton, then the dominant direction of skeleton key points and local point cloud density are calculated, and the point cloud near the missing area is moved based on these features to gradually complete the incomplete point cloud compensation. The experimental results show that the above repair method can effectively repair the incomplete point cloud with good robustness and can adapt to the individual tree point cloud with different geometric structures and correct the branch topological connection errors.