Ruikang Zhong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ruikang Zhong has a total of 70 co-authors. Here are the top co-authors by number of shared publications:
- Yuanwei Liu
University of Hong Kong
33 shared publications - Xidong Mu
Queen's University Belfast
11 shared publications - Hyundong Shin
Kyung Hee University
9 shared publications - Mona Jaber
School of Electronic Engineering and Computer Science, Queen Mary University of London, London, U.K.
8 shared publications - Qian Gao
School of Electronic Engineering and Computer Science, Queen Mary University of London, London, U.K.
6 shared publications - Xiao Liu
School of Electronic Engineering and Computer Science (EECS), Queen Mary University of London, London, U.K.
6 shared publications
Latest Publications
- 3 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (12) , 27995-28006
Blind Radio Map Construction via Topology-Guided Manifold Learning
Constructing radio maps traditionally requires extensive site surveys with precise location labels, resulting in costly and time-consuming calibration. Conventional approaches derive labels from inertial measurement units (IMUs) but are constrained by device-level access permissions and the need for pre-installed IMU hardware. In this article, we present a calibration-free radio map construction method that relies solely on channel state information (CSI) measurements, thereby obviating the need for location labels. Our key insight is to embed CSI data into a 2-D geographic space using a neural network, without any label information. The primary challenge is to preserve the real-world topology in the embedded space. To address this issue, we propose a novel topology-guided manifold learning (TGML) approach that learns a low-dimensional embedding through self-supervision based on its mapping to a topological map in the geographic space. Specifically, we introduce an embedding network that learns locally smoothed proximity, thus creating a compact low-dimensional representation in the latent space. We further employ a regularized transport method with a differentiable Sinkhorn distance to establish an optimal mapping between the latent and geographic spaces. We use the resulting mapping deviation to supervise the training of the embedding network, enabling continuous refinement through self-supervision. Experiments in an office environment show that TGML achieves an average localization error of 2.37 m and a relative beam estimation error of 6.68%, outperforming state-of-the-art methods.
- 3 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (12) , 27995-28006
Blind Radio Map Construction via Topology-Guided Manifold Learning
Constructing radio maps traditionally requires extensive site surveys with precise location labels, resulting in costly and time-consuming calibration. Conventional approaches derive labels from inertial measurement units (IMUs) but are constrained by device-level access permissions and the need for pre-installed IMU hardware. In this article, we present a calibration-free radio map construction method that relies solely on channel state information (CSI) measurements, thereby obviating the need for location labels. Our key insight is to embed CSI data into a 2-D geographic space using a neural network, without any label information. The primary challenge is to preserve the real-world topology in the embedded space. To address this issue, we propose a novel topology-guided manifold learning (TGML) approach that learns a low-dimensional embedding through self-supervision based on its mapping to a topological map in the geographic space. Specifically, we introduce an embedding network that learns locally smoothed proximity, thus creating a compact low-dimensional representation in the latent space. We further employ a regularized transport method with a differentiable Sinkhorn distance to establish an optimal mapping between the latent and geographic spaces. We use the resulting mapping deviation to supervise the training of the embedding network, enabling continuous refinement through self-supervision. Experiments in an office environment show that TGML achieves an average localization error of 2.37 m and a relative beam estimation error of 6.68%, outperforming state-of-the-art methods.
- 18 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. PP (00189545) , 1-6
RL Based Beamforming Optimization for 3D Pinching Antenna Assisted ISAC Systems
In this paper, a three-dimensional (3D) deployment scheme of pinching antenna array is proposed, aiming to enhances the performance of integrated sensing and communication (ISAC) systems. To fully realize the potential of 3D deployment, a joint antenna positioning, time allocation and transmit power optimization problem is formulated to maximize the sum communication rate with the constraints of target sensing rates and system energy. To solve the sum rate maximization problem, we propose a heterogeneous graph neural network based reinforcement learning (HGRL) algorithm. Simulation results show that the proposed 3D pinching antenna deployment improves the ISAC performance significantly, achieving around 10–20% higher communication rate compared with conventional 1D/2D layouts, while maintaining the sensing SNR near the required threshold with substantially lower power consumption. Moreover, the proposed HGRL algorithm surpasses other baselines in both performance and convergence speed due to the advanced observation construction of the environment.
- 18 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. PP (00189545) , 1-6
RL Based Beamforming Optimization for 3D Pinching Antenna Assisted ISAC Systems
In this paper, a three-dimensional (3D) deployment scheme of pinching antenna array is proposed, aiming to enhances the performance of integrated sensing and communication (ISAC) systems. To fully realize the potential of 3D deployment, a joint antenna positioning, time allocation and transmit power optimization problem is formulated to maximize the sum communication rate with the constraints of target sensing rates and system energy. To solve the sum rate maximization problem, we propose a heterogeneous graph neural network based reinforcement learning (HGRL) algorithm. Simulation results show that the proposed 3D pinching antenna deployment improves the ISAC performance significantly, achieving around 10–20% higher communication rate compared with conventional 1D/2D layouts, while maintaining the sensing SNR near the required threshold with substantially lower power consumption. Moreover, the proposed HGRL algorithm surpasses other baselines in both performance and convergence speed due to the advanced observation construction of the environment.
- 11 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25 (15361276) , 13590-13605
Task Delay Minimization for Mobile Edge Generation in D2D Underlaying Cellular Network
A novel mobile edge generation (MEG) framework is proposed to support latency-sensitive generation tasks in the social-aware device-to-device (D2D) underlaying cellular network. Within this framework, user devices (UDs) and base station (BS) are organized into socially cohesive communities based on content preference and spatial proximity, enabling cooperative generation tasks via both cellular and intra-community D2D communications. A joint seed-and-content based BS-D2D (JSCB) transmission protocol is proposed to dynamically orchestrate the transmission mode between seed acquisition with local generation and direct content sharing across multiple consecutive task rounds, incorporating the spillover mechanism for handling overdue transmissions. Based on this protocol, an average task delay minimization problem is formulated to jointly optimize the UD association between cellular and D2D communication, transmission mode, D2D pairing, and BS-side beamforming. To efficiently solve the hybrid and temporally coupled problem, a joint matching and proximal policy optimization (JMPPO) algorithm is developed, where the discrete and continuous actions are decoupled with specialized modules though a hierarchical deep reinforcement learning and matching design. Numerical results validate that 1) the JSCB protocol reduces delay through adaptive transmission scheduling and cellular/D2D coordination; 2) the JMPPO algorithm outperforms both learning-based and traditional baselines in terms of average delay under the spillover and hybrid action scenarios; 3) the proposed schemes demonstrate robustness across diverse network and system conditions.
- 11 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25 (15361276) , 13590-13605
Task Delay Minimization for Mobile Edge Generation in D2D Underlaying Cellular Network
A novel mobile edge generation (MEG) framework is proposed to support latency-sensitive generation tasks in the social-aware device-to-device (D2D) underlaying cellular network. Within this framework, user devices (UDs) and base station (BS) are organized into socially cohesive communities based on content preference and spatial proximity, enabling cooperative generation tasks via both cellular and intra-community D2D communications. A joint seed-and-content based BS-D2D (JSCB) transmission protocol is proposed to dynamically orchestrate the transmission mode between seed acquisition with local generation and direct content sharing across multiple consecutive task rounds, incorporating the spillover mechanism for handling overdue transmissions. Based on this protocol, an average task delay minimization problem is formulated to jointly optimize the UD association between cellular and D2D communication, transmission mode, D2D pairing, and BS-side beamforming. To efficiently solve the hybrid and temporally coupled problem, a joint matching and proximal policy optimization (JMPPO) algorithm is developed, where the discrete and continuous actions are decoupled with specialized modules though a hierarchical deep reinforcement learning and matching design. Numerical results validate that 1) the JSCB protocol reduces delay through adaptive transmission scheduling and cellular/D2D coordination; 2) the JMPPO algorithm outperforms both learning-based and traditional baselines in terms of average delay under the spillover and hybrid action scenarios; 3) the proposed schemes demonstrate robustness across diverse network and system conditions.
- Top Cited Papers
- 6 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25 (15361276) , 13416-13429
Pinching Antenna Systems for Integrated Sensing and Communications
In this work, a multiple waveguide pinching antenna system (PASS) assisted integrated sensing and communication (ISAC) system is proposed, where the base station (BS) is equipped with transmitting pinching antennas (PAs) and receiving uniform linear array (ULA) antennas. The PASS-transmitting- ULA-receiving (PTUR) BS transmits the communication and sensing signals through the PAs on waveguides and collects the echo sensing signals with the mounted ULA. Based on this configuration, a target sensing Cramèr–Rao Bound (CRB) minimization problem is formulated under communication quality-of-service (QoS) constraints, power budget constraint, and PA deployment constraints. To tackle the resulting non-convex problem, an alternating optimization (AO) framework is developed, which decomposes the problem into a digital beamforming sub-problem and a pinching beamforming sub-problem. The digital beamforming design is optimized via semidefinite relaxation (SDR), while the PA deployment is updated using penalty-based method. Simulation results demonstrate that: 1) the proposed PASS assisted ISAC framework achieves superior performance over benchmark schemes; and 2) the PASS assisted ISAC is less affected by stringent communication constraints compared to conventional MIMO-ISAC, and benefits from increasing the number of waveguides and PAs per waveguide.
- 6 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25 (15361276) , 13416-13429
Top Cited PapersPinching Antenna Systems for Integrated Sensing and Communications
In this work, a multiple waveguide pinching antenna system (PASS) assisted integrated sensing and communication (ISAC) system is proposed, where the base station (BS) is equipped with transmitting pinching antennas (PAs) and receiving uniform linear array (ULA) antennas. The PASS-transmitting- ULA-receiving (PTUR) BS transmits the communication and sensing signals through the PAs on waveguides and collects the echo sensing signals with the mounted ULA. Based on this configuration, a target sensing Cramèr–Rao Bound (CRB) minimization problem is formulated under communication quality-of-service (QoS) constraints, power budget constraint, and PA deployment constraints. To tackle the resulting non-convex problem, an alternating optimization (AO) framework is developed, which decomposes the problem into a digital beamforming sub-problem and a pinching beamforming sub-problem. The digital beamforming design is optimized via semidefinite relaxation (SDR), while the PA deployment is updated using penalty-based method. Simulation results demonstrate that: 1) the proposed PASS assisted ISAC framework achieves superior performance over benchmark schemes; and 2) the PASS assisted ISAC is less affected by stringent communication constraints compared to conventional MIMO-ISAC, and benefits from increasing the number of waveguides and PAs per waveguide.
- 13 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Green Communications and Networking
- Vol. 10, 2164-2177
Waveform Design for Partial-Time Superimposed ISAC Systems
Nowadays, waveforms of integrated sensing and communication (ISAC) are almost based on conventional communication and sensing signal, which bounds both the communication and sensing performance. To deal with this issue, in this paper, a novel waveform design is presented for the partial-time superimposed (PTS) ISAC system. At the base station (BS), a parameter-adjustable linear frequency modulation (LFM) pulse signal and a continuous communication orthogonal frequency division multiplexing (OFDM) signal are employed to broadcast public information and perform sensing tasks, respectively, using a PTS scheme. Pulse compression gain enhances the system’s long-range sensing capability, while OFDM ensures the system’s high-speed data transmission capability. Meanwhile, the LFM signal is utilized as superimposed pilot for channel estimation, which has higher time-frequency resource utilization and stronger real-time performance compared to orthogonal pilots. We present an accurate parameter estimation method of multi-path sensing signal for reconstructing and interference cancellation in communication users. Additionally, a cyclic maximum likelihood method is introduced for channel estimation and the Cramér-Rao lower bound (CRLB) of channel estimation is derived. Simulations demonstrate the accuracy and robustness of the proposed parameter estimation algorithm as well as the improved channel estimation performance over traditional methods. The proposed waveform design method can achieve reliable data transmission and accurate target sensing.
- 13 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Green Communications and Networking
- Vol. 10, 2164-2177
Waveform Design for Partial-Time Superimposed ISAC Systems
Nowadays, waveforms of integrated sensing and communication (ISAC) are almost based on conventional communication and sensing signal, which bounds both the communication and sensing performance. To deal with this issue, in this paper, a novel waveform design is presented for the partial-time superimposed (PTS) ISAC system. At the base station (BS), a parameter-adjustable linear frequency modulation (LFM) pulse signal and a continuous communication orthogonal frequency division multiplexing (OFDM) signal are employed to broadcast public information and perform sensing tasks, respectively, using a PTS scheme. Pulse compression gain enhances the system’s long-range sensing capability, while OFDM ensures the system’s high-speed data transmission capability. Meanwhile, the LFM signal is utilized as superimposed pilot for channel estimation, which has higher time-frequency resource utilization and stronger real-time performance compared to orthogonal pilots. We present an accurate parameter estimation method of multi-path sensing signal for reconstructing and interference cancellation in communication users. Additionally, a cyclic maximum likelihood method is introduced for channel estimation and the Cramér-Rao lower bound (CRLB) of channel estimation is derived. Simulations demonstrate the accuracy and robustness of the proposed parameter estimation algorithm as well as the improved channel estimation performance over traditional methods. The proposed waveform design method can achieve reliable data transmission and accurate target sensing.
- 4 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Intelligent Transportation Systems Magazine
- Vol. 18 (3) , 35-44
Safe Intelligent Vehicles: Intent Is What We Need
The primary concern in the realm of intelligent vehicle (IV) technology is reducing collisions, particularly those involving vulnerable road users, such as pedestrians. Such incidents are detrimental to future mobility, as they deter people from walking, an active travel mode, and could be fatal. In this article, a collaborative intelligent transportation framework is presented to predict pedestrians’ intent using roadside closed-circuit television and edge computing devices with the support of vehicle-to-everything communication. We propose a contextual stacked ensemble approach that integrates an ensemble of ultralightweight feature-specific submodels, where each of the submodels focuses on body posture, traffic context, and relative location, respectively, aiming to enable accurate and real-time pedestrian intent prediction within the limited computational capacity of roadside edge devices. Experimental results demonstrate that the proposed approach outperforms existing state-of-the-art benchmarks and meets the time constraints on inference required by IVs.
- 4 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Intelligent Transportation Systems Magazine
- Vol. 18 (3) , 35-44
Safe Intelligent Vehicles: Intent Is What We Need
The primary concern in the realm of intelligent vehicle (IV) technology is reducing collisions, particularly those involving vulnerable road users, such as pedestrians. Such incidents are detrimental to future mobility, as they deter people from walking, an active travel mode, and could be fatal. In this article, a collaborative intelligent transportation framework is presented to predict pedestrians’ intent using roadside closed-circuit television and edge computing devices with the support of vehicle-to-everything communication. We propose a contextual stacked ensemble approach that integrates an ensemble of ultralightweight feature-specific submodels, where each of the submodels focuses on body posture, traffic context, and relative location, respectively, aiming to enable accurate and real-time pedestrian intent prediction within the limited computational capacity of roadside edge devices. Experimental results demonstrate that the proposed approach outperforms existing state-of-the-art benchmarks and meets the time constraints on inference required by IVs.
- Open Access
Deep Learning based Three-stage Solution for ISAC Beamforming Optimization
In this paper, a general ISAC system where the base station (BS) communicates with multiple users and performs target detection is considered. Then, a sum communication rate maximization problem is formulated, subjected to the constraints of transmit power and the minimum sensing rates of users. To solve this problem, we develop a framework that leverages deep learning algorithms to provide a three-stage solution for ISAC beamforming. The three-stage beamforming optimization solution includes three modules: 1) an unsupervised learning based feature extraction algorithm is proposed to extract fixed-size latent features while keeping its essential information from the variable channel state information (CSI); 2) a reinforcement learning (RL) based beampattern optimization algorithm is proposed to search the desired beampattern according to the extracted features; 3) a supervised learning based beamforming reconstruction algorithm is proposed to reconstruct the beamforming vector from beampattern given by the RL agent. Simulation results demonstrate that the proposed three-stage solution outperforms the baseline RL algorithm by optimizing the intuitional beampattern rather than beamforming.
Open AccessDeep Learning based Three-stage Solution for ISAC Beamforming Optimization
In this paper, a general ISAC system where the base station (BS) communicates with multiple users and performs target detection is considered. Then, a sum communication rate maximization problem is formulated, subjected to the constraints of transmit power and the minimum sensing rates of users. To solve this problem, we develop a framework that leverages deep learning algorithms to provide a three-stage solution for ISAC beamforming. The three-stage beamforming optimization solution includes three modules: 1) an unsupervised learning based feature extraction algorithm is proposed to extract fixed-size latent features while keeping its essential information from the variable channel state information (CSI); 2) a reinforcement learning (RL) based beampattern optimization algorithm is proposed to search the desired beampattern according to the extracted features; 3) a supervised learning based beamforming reconstruction algorithm is proposed to reconstruct the beamforming vector from beampattern given by the RL agent. Simulation results demonstrate that the proposed three-stage solution outperforms the baseline RL algorithm by optimizing the intuitional beampattern rather than beamforming.
- 22 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cognitive Communications and Networking
- Vol. 12, 6247-6264
AI-Enabled Near-Field Communications: User Movement Prediction and Beam Tracking
A novel near-field beam tracking framework is proposed based on the prediction of the movement of mobile users (MUs). A two-step approach is proposed to successively align the near-field beams in the polar domain and allocate the data streams to adapt to the variations of the channels’ degrees of freedom (DoFs). First, a Transformer-based algorithm is proposed to predict the locations of MUs, where digit-aware embedding and weighted mean square error (WMSE) are incorporated. The multi-head attention mechanism can attend to individual decimal digits of the MUs’ locations to reduce the prediction error from the digit perspective. Then, a hierarchical proximal policy optimization algorithm with a dual-tiered architecture is proposed to learn the successive hybrid beamfocusing and data stream allocation according to the predicted MUs’ locations. Dealing with the high-dimensional action space introduced by the near-field extremely large-scale antenna arrays, the dual-tiered sub-policies are hierarchically designed to reduce dimensionality and facilitate learning. The numerical results demonstrate that 1) the proposed algorithms outperform the baselines in terms of throughput due to the high predictive accuracy and beamfocusing gain; 2) the proposed two-step beam tracking scheme can achieve a similar throughput to the upper-bound scheme with perfect channel state information, while the performance gap of the non-tracking scheme is 64.8%; 3) compared to a fixed scheme, the proposed data stream allocation scheme benefits a performance gain which escalates with an increasing number of allocable data streams.
- 22 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cognitive Communications and Networking
- Vol. 12, 6247-6264
AI-Enabled Near-Field Communications: User Movement Prediction and Beam Tracking
A novel near-field beam tracking framework is proposed based on the prediction of the movement of mobile users (MUs). A two-step approach is proposed to successively align the near-field beams in the polar domain and allocate the data streams to adapt to the variations of the channels’ degrees of freedom (DoFs). First, a Transformer-based algorithm is proposed to predict the locations of MUs, where digit-aware embedding and weighted mean square error (WMSE) are incorporated. The multi-head attention mechanism can attend to individual decimal digits of the MUs’ locations to reduce the prediction error from the digit perspective. Then, a hierarchical proximal policy optimization algorithm with a dual-tiered architecture is proposed to learn the successive hybrid beamfocusing and data stream allocation according to the predicted MUs’ locations. Dealing with the high-dimensional action space introduced by the near-field extremely large-scale antenna arrays, the dual-tiered sub-policies are hierarchically designed to reduce dimensionality and facilitate learning. The numerical results demonstrate that 1) the proposed algorithms outperform the baselines in terms of throughput due to the high predictive accuracy and beamfocusing gain; 2) the proposed two-step beam tracking scheme can achieve a similar throughput to the upper-bound scheme with perfect channel state information, while the performance gap of the non-tracking scheme is 64.8%; 3) compared to a fixed scheme, the proposed data stream allocation scheme benefits a performance gain which escalates with an increasing number of allocable data streams.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25 (15361276) , 8754-8768
Deep Learning-Based Beamforming Optimization for ISAC Systems: A Low-Complexity and Transferable Framework
Due to the increasing number of users and antennas in extremely large antenna arrays (ELAA) based integrated sensing and communication (ISAC) systems, the complexity of beamforming optimization becomes overwhelming, which impedes real-time and cost-efficient ISAC deployment in practice. Specifically, a general ISAC system where the base station (BS) communicates with multiple users and performs target detection is considered. Then, a sum communication rate maximization problem is formulated, subjected to the constraints of transmit power and the minimum sensing rates of users. To solve this problem, we develop a framework that leverages deep learning algorithms to provide a low complexity and transferable (LCT) solution for ISAC beamforming. The proposed LCT beamforming optimization framework includes three modules: 1) an unsupervised learning based feature extraction algorithm is proposed to extract fixed-size latent features while keeping its essential information from the variable channel state information (CSI); 2) a reinforcement learning (RL) based beampattern optimization algorithm is proposed to search the desired beampattern according to the extracted features; 3) a supervised learning based beamforming reconstruction algorithm is proposed to reconstruct the beamforming vector from beampattern given by the RL agent. Simulation results demonstrate that the proposed LCT framework outperforms the baseline RL algorithm by optimizing the intuitional beampattern rather than beamforming. Moreover, the LCT framework provides a solution for low-cost beamforming optimization in ISAC systems. The trained RL module can be transferred without retraining when the antenna or user number changes.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25 (15361276) , 8754-8768
Deep Learning-Based Beamforming Optimization for ISAC Systems: A Low-Complexity and Transferable Framework
Due to the increasing number of users and antennas in extremely large antenna arrays (ELAA) based integrated sensing and communication (ISAC) systems, the complexity of beamforming optimization becomes overwhelming, which impedes real-time and cost-efficient ISAC deployment in practice. Specifically, a general ISAC system where the base station (BS) communicates with multiple users and performs target detection is considered. Then, a sum communication rate maximization problem is formulated, subjected to the constraints of transmit power and the minimum sensing rates of users. To solve this problem, we develop a framework that leverages deep learning algorithms to provide a low complexity and transferable (LCT) solution for ISAC beamforming. The proposed LCT beamforming optimization framework includes three modules: 1) an unsupervised learning based feature extraction algorithm is proposed to extract fixed-size latent features while keeping its essential information from the variable channel state information (CSI); 2) a reinforcement learning (RL) based beampattern optimization algorithm is proposed to search the desired beampattern according to the extracted features; 3) a supervised learning based beamforming reconstruction algorithm is proposed to reconstruct the beamforming vector from beampattern given by the RL agent. Simulation results demonstrate that the proposed LCT framework outperforms the baseline RL algorithm by optimizing the intuitional beampattern rather than beamforming. Moreover, the LCT framework provides a solution for low-cost beamforming optimization in ISAC systems. The trained RL module can be transferred without retraining when the antenna or user number changes.