Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hanife Bukre Koc Gunessu has a total of 2 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Production and 3D printing optimization of PLA/spent Turkish coffee grounds biocomposites: Investigation of mechanical performance

    by Hanife Bukre Koç Güneşsu, Gurcan Atakok, Menderes Kam

    Spent Turkish coffee grounds (STCG) were investigated as a locally available bio-based filler for polylactic acid (PLA) filaments intended for fused deposition modeling (FDM). After drying, grinding, alkaline treatment, and sieving through a 325-mesh sieve with a nominal aperture of 45 µm, STCG was incorporated into PLA at 1, 3, and 5 wt.%. Filament processability, 3D printability, FTIR characteristics, SEM morphology, and the mechanical response of 3D-printed specimens were evaluated. FTIR spectra retained the principal PLA absorption bands without distinct new peaks after STCG incorporation. Temperature-tower tests identified a practical processing window of 200–215°C, with 210°C selected for subsequent printing. At this temperature, 3DBenchy specimens containing up to 3 wt.% STCG showed comparatively stable formation, whereas the 5 wt.% formulation exhibited partial first-layer detachment and base distortion. The 1 wt.% STCG formulation exhibited the highest mean mechanical response: tensile strength increased from 52.1 to 55.2 MPa (+5.95%), flexural strength from 83.0 to 88.8 MPa (+6.99%), flexural modulus from 3480 to 3857 MPa (+10.83%), and Charpy-mode impact strength from 9.67 to 16.23 kJ/m 2 (+67.84%) relative to PLA. Tensile toughness also increased from 1.068 MJ/m 3 to 1.148 MJ/m 3 . Higher STCG loadings were accompanied by lower tensile and flexural responses and greater morphological heterogeneity, including localized voids, filler-rich regions, and discontinuous fracture features. Shore D hardness remained essentially unchanged up to 3 wt.% and decreased at 5 wt.%. In addition, the coffee bean-shaped planter was designed in SolidWorks and 3D printed using 1 wt.% STCG formulation, demonstrating the practical printability of the composite filament. These findings support the use of locally sourced STCG as a filler for PLA filaments in sustainable FDM applications.

  • Open Access

    Toward High-Value Circular Pathways for Polymer Waste: Process–Structure–Property Strategies in Mechanical Recycling, Filament Re-Extrusion, and Additive Manufacturing

    by Hanife Bukre Koc Gunessu, Gurcan Atakok, Menderes Kam

    The global polymer waste burden has catalyzed a shift from linear “production–use–disposal” systems to circular models that prioritize recycling, reuse, and value retention. This article proposes an integrated, technology-ready roadmap for mechanical recycling and reuse of commodity and bio-based polymers via filament re-extrusion and Additive Manufacturing (AM). Building upon recent findings on performance envelopes of virgin vs. recycled Polylactic Acid (PLA) filaments processed by Fused Deposition Modeling (FDM), process parameter sensitivities (layer height, infill density) and their statistical optimization, and functional reinforcement routes (aluminum: Al, alumina: Al2O3, titanium: Ti, and Nano Boron Nitride: nano-BN), we articulate (1) a process–structure–property (PSP) mapping; (2) a low-defect, low-energy filament re-extrusion protocol; and (3) a graded-value strategy for upcycling mixed polymer streams. Across case analyses, we show that recycled PLA can achieve near-parity with virgin PLA when extrusion quality and printing parameters are controlled, and that ceramic/metal nanofillers enable thermal management and biocompatibility benefits crucial for durable reuse scenarios.