Abdur Rahman
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Abdur Rahman has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Hasan Ahmad
Research Laboratory of Polymer Colloids and Nanomaterials, Department of Chemistry, Rajshahi University, Rajshahi 6205, Bangladesh
9 shared publications - Mahbubor Rahman
University of Rajshahi
4 shared publications - Anwar Ul-Hamid
Core Research Facilities, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia
3 shared publications Ataur Rahman
Polymer Colloids and Nanomaterials Research Lab, Department of Chemistry, Faculty of Science
3 shared publications- Mohammad Ahasanur Rabbi
BCSIR Rajshahi Laboratories, Bangladesh Council of Scientific and Industrial Research (BCSIR), Rajshahi, 6206, Bangladesh
3 shared publications - Muhyminul Islam
Polymer Colloids and Nanomaterials Research Lab Faculty of Science, Department of Chemistry Rajshahi University Rajshahi 6205 Bangladesh
3 shared publications
Latest Publications
- Open Access
- 27 May 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16 (31) , 28874-28891
Sustainable earth-abundant bismuth catalytic nanointerfaces using biopolymeric silk fibroin for efficient pollutant reduction
Schematic of the production of Bi/SF nanointerfaces via the dissolution of SF in EG and their catalytic activities in reducing azo and nitro compounds.
- 27 May 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16 (31) , 28874-28891
Open AccessSustainable earth-abundant bismuth catalytic nanointerfaces using biopolymeric silk fibroin for efficient pollutant reduction
Schematic of the production of Bi/SF nanointerfaces via the dissolution of SF in EG and their catalytic activities in reducing azo and nitro compounds.
- 13 February 2025
- Published by American Chemical Society (ACS) in Bioconjugate Chemistry
- Vol. 36 (3) , 563-577
Functionalization of Biomimetic Polydopamine Shells Constructed onto Bismuth-Core Particles for pH-Mediated Drug Targeting to Heal Bacterial Infections
Nonhealing chronic bacterial infections are very challenging to both patients and the healthcare-providing system. Multimodal therapy enhances the antibiotic efficacy to treat infections via combating multidrug resistance through cumulative therapeutic effects. Functionalized polydopamine (PDA)-coated Bi particles having a core-shell structure may treat such chronic infections. We fabricated a new advanced material based on Tris-functionalized PDA and Bi using a facile three-step protocol for healing drug-resistant bacterial infections. The fabrication of Bi particles, PDA coating on Bi particles, and their Tris functionalization were confirmed by X-ray diffraction, and spectroscopic and thermogravimetric analyses. Tris-functionalized PDA-coated Bi particles, abbreviated as Bi/PDA-Tris, exhibited a higher average diameter, improved hydrophilicity, aqueous dispersity, and colloidal stability. Bi/PDA-Tris showed a delicate surface morphology, narrow size distribution, spherical shape, and core-shell structure. In vitro bovine serum albumin and hemolysis assays showed minimal protein adsorption and the desirable hemocompatibility of Bi/PDA-Tris. Antibacterial gentamicin (GM)-immobilized Bi/PDA-Tris showed pH-mediated sustained drug release kinetics under acidic conditions. The in vitro study of GM-loaded Bi/PDA-Tris particles exhibited significant bacterial growth inhibition and bactericidal activity. Tris functionalization effectively enhances the antibacterial efficacy of the PDA shell under acidic conditions to target and heal bacterial infections. This approach has introduced economic, nontoxic, easy-to-use, relatively more biocompatible Bi particles as a substituent for precise metals like Pt, Au, and Ag for the development of core-shell composite materials.
- 13 February 2025
- Published by American Chemical Society (ACS) in Bioconjugate Chemistry
- Vol. 36 (3) , 563-577
Functionalization of Biomimetic Polydopamine Shells Constructed onto Bismuth-Core Particles for pH-Mediated Drug Targeting to Heal Bacterial Infections
Nonhealing chronic bacterial infections are very challenging to both patients and the healthcare-providing system. Multimodal therapy enhances the antibiotic efficacy to treat infections via combating multidrug resistance through cumulative therapeutic effects. Functionalized polydopamine (PDA)-coated Bi particles having a core-shell structure may treat such chronic infections. We fabricated a new advanced material based on Tris-functionalized PDA and Bi using a facile three-step protocol for healing drug-resistant bacterial infections. The fabrication of Bi particles, PDA coating on Bi particles, and their Tris functionalization were confirmed by X-ray diffraction, and spectroscopic and thermogravimetric analyses. Tris-functionalized PDA-coated Bi particles, abbreviated as Bi/PDA-Tris, exhibited a higher average diameter, improved hydrophilicity, aqueous dispersity, and colloidal stability. Bi/PDA-Tris showed a delicate surface morphology, narrow size distribution, spherical shape, and core-shell structure. In vitro bovine serum albumin and hemolysis assays showed minimal protein adsorption and the desirable hemocompatibility of Bi/PDA-Tris. Antibacterial gentamicin (GM)-immobilized Bi/PDA-Tris showed pH-mediated sustained drug release kinetics under acidic conditions. The in vitro study of GM-loaded Bi/PDA-Tris particles exhibited significant bacterial growth inhibition and bactericidal activity. Tris functionalization effectively enhances the antibacterial efficacy of the PDA shell under acidic conditions to target and heal bacterial infections. This approach has introduced economic, nontoxic, easy-to-use, relatively more biocompatible Bi particles as a substituent for precise metals like Pt, Au, and Ag for the development of core-shell composite materials.
- 4 September 2024
- Published by Wiley in ChemistrySelect
- Vol. 9 (33)
Equilibrium, Kinetic and Isotherm Studies of Dye Adsorption from Aqueous Solution by Recyclable Amine‐Functionalized Silica Coated Magnetic Nanoparticles
The evaluation of the adsorption capacity of amine‐functionalized silica coated iron oxide magnetic particles (Fe 3 O 4 /SiO 2 ‐NH 2 ) as a highly recyclable adsorbent for Congo Red (CR) and Eriochrome Black T (EBT) azo‐dyes from water is reported. The Fe 3 O 4 /SiO 2 ‐NH 2 were prepared by a simple co‐precipitation method of iron oxide (Fe 3 O 4 ) nanoparticles followed by silica coating on oleic acid coated Fe 3 O 4 . A series of investigation was performed to assess the various experimental parameters like contact time (0–360 min), pH (3–10), stirring speed (0–500 rpm), adsorbent dosages (0.02–0.12 g) and initial concentrations (0.02–0.15 mg mL −1 ) of dyes. According to the Langmuir isotherm, the maximum adsorption capacities of CR and EBT on Fe 3 O 4 /SiO 2 ‐NH 2 particles were found to be 211.86 mg g −1 and 81.98 mg g −1 , respectively. In comparison, the pseudo‐second order model provided adsorption capacities of 200.40 mg g −1 for CR and 80.91 mg g −1 for EBT. Additionally, the maximum adsorption amounts of CR and EBT on Fe 3 O 4 /SiO 2 ‐NH 2 particles were 179.37 mg g −1 and 75.43 mg g −1 , achieved within 300 min and 180 min at pH 3, respectively. The dye‐loaded particles were recoverable for CR and EBT removal by simple regeneration with 0.1 molL −1 NaOH solution to use the particles until more than five cycles.
- 4 September 2024
- Published by Wiley in ChemistrySelect
- Vol. 9 (33)
Equilibrium, Kinetic and Isotherm Studies of Dye Adsorption from Aqueous Solution by Recyclable Amine‐Functionalized Silica Coated Magnetic Nanoparticles
The evaluation of the adsorption capacity of amine‐functionalized silica coated iron oxide magnetic particles (Fe 3 O 4 /SiO 2 ‐NH 2 ) as a highly recyclable adsorbent for Congo Red (CR) and Eriochrome Black T (EBT) azo‐dyes from water is reported. The Fe 3 O 4 /SiO 2 ‐NH 2 were prepared by a simple co‐precipitation method of iron oxide (Fe 3 O 4 ) nanoparticles followed by silica coating on oleic acid coated Fe 3 O 4 . A series of investigation was performed to assess the various experimental parameters like contact time (0–360 min), pH (3–10), stirring speed (0–500 rpm), adsorbent dosages (0.02–0.12 g) and initial concentrations (0.02–0.15 mg mL −1 ) of dyes. According to the Langmuir isotherm, the maximum adsorption capacities of CR and EBT on Fe 3 O 4 /SiO 2 ‐NH 2 particles were found to be 211.86 mg g −1 and 81.98 mg g −1 , respectively. In comparison, the pseudo‐second order model provided adsorption capacities of 200.40 mg g −1 for CR and 80.91 mg g −1 for EBT. Additionally, the maximum adsorption amounts of CR and EBT on Fe 3 O 4 /SiO 2 ‐NH 2 particles were 179.37 mg g −1 and 75.43 mg g −1 , achieved within 300 min and 180 min at pH 3, respectively. The dye‐loaded particles were recoverable for CR and EBT removal by simple regeneration with 0.1 molL −1 NaOH solution to use the particles until more than five cycles.
- Open Access
- 5 August 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (34) , 24447-24461
Highly efficient recyclable bismuth nanocatalysts fabricated using a facile one-step aqueous method for faster reduction of azo dye contaminants
Easily accessible robust synthesis of metallic nanoparticles (NPs) and their colloidal stabilization via successive surface functionalization with desired molecules are crucial for catalytic applications. In this research, tannic acid (TA)-functionalized bismuth (Bi)-based novel NPs were prepared via a simple in situ aqueous reduction of Bi3+ ions for the catalytic reduction of azo groups. The synthesis, morphology, and structure of Bi/TANPs were confirmed through spectroscopic, electron microscopic and X-ray diffraction analyses. The Bi/TANPs comprise Bi, carbon, oxygen and sodium as building components and possess a high negative surface charge of −58 mV, colloidal dispersity, thermal stability and crystalline structure. The Bi/TANPs are almost spherical shaped with an average diameter of 33 nm. The surface of the catalyst is mesoporous with a high specific surface area of 267 m2 g−1. The designed Bi/TANPs exhibit pH-specific affinity for azo dye molecules and reduced azo moieties in the presence of aqueous NaBH4 without requiring any hydrogen gas supply. The catalytic reduction efficiencies of Bi/TANPs against methylene blue and Congo red are almost 100%. These reduction reactions are very fast owing to the presence of TA moieties on the catalyst surface, which facilitate direct electron transfer to azo groups, and follow a pseudo-first-order kinetic model. The catalyst is mechanically recyclable, and shows a minimal loss (3+ ions and the concomitant colloidal stabilization of Bi NPs.
- 5 August 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (34) , 24447-24461
Open AccessHighly efficient recyclable bismuth nanocatalysts fabricated using a facile one-step aqueous method for faster reduction of azo dye contaminants
Easily accessible robust synthesis of metallic nanoparticles (NPs) and their colloidal stabilization via successive surface functionalization with desired molecules are crucial for catalytic applications. In this research, tannic acid (TA)-functionalized bismuth (Bi)-based novel NPs were prepared via a simple in situ aqueous reduction of Bi3+ ions for the catalytic reduction of azo groups. The synthesis, morphology, and structure of Bi/TANPs were confirmed through spectroscopic, electron microscopic and X-ray diffraction analyses. The Bi/TANPs comprise Bi, carbon, oxygen and sodium as building components and possess a high negative surface charge of −58 mV, colloidal dispersity, thermal stability and crystalline structure. The Bi/TANPs are almost spherical shaped with an average diameter of 33 nm. The surface of the catalyst is mesoporous with a high specific surface area of 267 m2 g−1. The designed Bi/TANPs exhibit pH-specific affinity for azo dye molecules and reduced azo moieties in the presence of aqueous NaBH4 without requiring any hydrogen gas supply. The catalytic reduction efficiencies of Bi/TANPs against methylene blue and Congo red are almost 100%. These reduction reactions are very fast owing to the presence of TA moieties on the catalyst surface, which facilitate direct electron transfer to azo groups, and follow a pseudo-first-order kinetic model. The catalyst is mechanically recyclable, and shows a minimal loss (3+ ions and the concomitant colloidal stabilization of Bi NPs.
- 12 June 2024
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 48 (27) , 12399-12411
Magnetically recyclable adsorption of anionic pollutants from wastewater using 3,5-diaminobenzoic acid-functionalized magnetic iron oxide nanoparticles
Simple one-step synthesis of magnetic Fe 3 O 4 @PABA nanoadsorbents for magnetically recyclable adsorption of anionic azo dye pollutants from wastewater.
- 12 June 2024
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 48 (27) , 12399-12411
Magnetically recyclable adsorption of anionic pollutants from wastewater using 3,5-diaminobenzoic acid-functionalized magnetic iron oxide nanoparticles
Simple one-step synthesis of magnetic Fe 3 O 4 @PABA nanoadsorbents for magnetically recyclable adsorption of anionic azo dye pollutants from wastewater.
- Open Access
- 2 May 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (19) , 20891-20905
Facile Fabrication and Characterization of Amine-Functional Silica Coated Magnetic Iron Oxide Nanoparticles for Aqueous Carbon Dioxide Adsorption
Surface active amine-functionalized silica coated magnetic iron oxide nanoparticles were prepared by a simple two-step process for adsorbing CO2 gas from aqueous medium. First, oleic acid (OA) coated iron oxide magnetic particles (denoted as Fe3O4-OA) were prepared by a simple coprecipitation method. Then, the surface of the Fe3O4-OA particles was coated with silica by using tetraethyl orthosilicate. Finally, aminated Fe3O4/SiO2-NH2 nanoparticles were concomitantly formed by the reactions of 3-aminopropyl triethoxysilane with silica-coated particles. The formation of materials was confirmed by Fourier transform infrared spectral analysis. Transmission electron microscopic analysis revealed both spherical and needle-shaped morphologies of magnetic Fe3O4/SiO2-NH2 particles with an average size of 15 and 68.6 nm, respectively. The saturation magnetization of Fe3O4/SiO2-NH2 nanoparticles was found to be 33.6 emu g-1, measured by a vibrating sample magnetometer at ambient conditions. The crystallinity and average crystallite size (7.0 nm) of the Fe3O4/SiO2-NH2 particles were revealed from X-ray diffraction data analyses. Thermogravimetric analysis exhibited good thermal stability of the nanoadsorbent up to an elevated temperature. Zeta potential measurements revealed pH-sensitive surface activity of Fe3O4/SiO2-NH2 nanoparticles in aqueous medium. The produced magnetic Fe3O4/SiO2-NH2 nanoparticles also exhibited efficient proton capturing activity (92%). The particles were used for magnetically recyclable adsorption of aqueous CO2 at different pH values and temperatures. Fe3O4/SiO2-NH2 nanoparticles demonstrated the highest aqueous CO2 adsorption efficiency (90%) at 40 °C, which is clearly two times higher than that of nonfunctionalized Fe3O4-OA particles.
- 2 May 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (19) , 20891-20905
Open AccessFacile Fabrication and Characterization of Amine-Functional Silica Coated Magnetic Iron Oxide Nanoparticles for Aqueous Carbon Dioxide Adsorption
Surface active amine-functionalized silica coated magnetic iron oxide nanoparticles were prepared by a simple two-step process for adsorbing CO2 gas from aqueous medium. First, oleic acid (OA) coated iron oxide magnetic particles (denoted as Fe3O4-OA) were prepared by a simple coprecipitation method. Then, the surface of the Fe3O4-OA particles was coated with silica by using tetraethyl orthosilicate. Finally, aminated Fe3O4/SiO2-NH2 nanoparticles were concomitantly formed by the reactions of 3-aminopropyl triethoxysilane with silica-coated particles. The formation of materials was confirmed by Fourier transform infrared spectral analysis. Transmission electron microscopic analysis revealed both spherical and needle-shaped morphologies of magnetic Fe3O4/SiO2-NH2 particles with an average size of 15 and 68.6 nm, respectively. The saturation magnetization of Fe3O4/SiO2-NH2 nanoparticles was found to be 33.6 emu g-1, measured by a vibrating sample magnetometer at ambient conditions. The crystallinity and average crystallite size (7.0 nm) of the Fe3O4/SiO2-NH2 particles were revealed from X-ray diffraction data analyses. Thermogravimetric analysis exhibited good thermal stability of the nanoadsorbent up to an elevated temperature. Zeta potential measurements revealed pH-sensitive surface activity of Fe3O4/SiO2-NH2 nanoparticles in aqueous medium. The produced magnetic Fe3O4/SiO2-NH2 nanoparticles also exhibited efficient proton capturing activity (92%). The particles were used for magnetically recyclable adsorption of aqueous CO2 at different pH values and temperatures. Fe3O4/SiO2-NH2 nanoparticles demonstrated the highest aqueous CO2 adsorption efficiency (90%) at 40 °C, which is clearly two times higher than that of nonfunctionalized Fe3O4-OA particles.
- Open Access
- 14 November 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (47) , 44523-44536
Capturing Acidic CO2 Using Surface-Active Difunctional Core–Shell Composite Polymer Particles via an Aqueous Medium
Multifunctional surface-active polymeric composites are attractive materials for the adsorption of various small molecules. Herein, dual-functionalized micron-sized surface-active composite polymer particles were prepared by a three-step process for CO2 adsorption. First, polystyrene (PS) seed particles were prepared via the dispersion polymerization of styrene. PS/P(MMA-AAm-EGDMA) composite polymer particles were then synthesized by aqueous seeded copolymerization of methyl methacrylate (MMA) and acrylamide (AAm) in the presence of an ethylene glycol dimethacrylate (EGDMA) cross-linker. Finally, the amide moieties of PS/P(MMA-AAm-EGDMA) composite particles were converted into an amine-functionalized composite by using the Hofmann degradation reaction. The presence of primary amine groups on the surface of aminated composite particles was confirmed by some conventional chemical routes, such as diazotization and Schiff's base formation reactions. The formation and functionality of the PS seed, PS/P(MMA-AAm-EGDMA), and aminated PS/P(MMA-AAm-EGDMA) composite polymer particles were confirmed by Fourier transform infrared (FTIR) spectra analyses. Scanning electron microscopy (SEM) analysis revealed spherical shape, size, and surface morphologies of the PS seed, reference composite, and aminated composites. The elemental surface compositions, surface porosity, pore volume, pore diameter, and surface area of both composite particles were evaluated by energy-dispersive X-ray (EDX) mapping, X-ray photoelectron spectroscopy, and Brunauer-Emmett-Teller (BET) and Barrett-Joyner-Halenda (BJH) analyses. Dynamic light scattering (DLS) and zeta-potential measurements confirmed the pH-dependent surface properties of the functionalized particles. The amount of the adsorbed anionic emulsifier, sodium dodecyl sulfate (SDS), on the surface of aminated PS/P(MMA-AAm-EGDMA) is higher at pH 4 than that at pH 10. A vice versa result was found in the case of cationic surfactant, hexadecyltrimethylammonium bromide (HTABr), adsorption. Synthesized aminated composite particles were used as an adsorbent for CO2 adsorption via bubbling CO2 in an aqueous medium. The changes in dispersion pH were monitored continuously during the adsorption of CO2 under various conditions. The amount of CO2 adsorption by aminated composite particles was found to be 209 mg/g, which is almost double that of reference composite particles.
- 14 November 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (47) , 44523-44536
Open AccessCapturing Acidic CO2 Using Surface-Active Difunctional Core–Shell Composite Polymer Particles via an Aqueous Medium
Multifunctional surface-active polymeric composites are attractive materials for the adsorption of various small molecules. Herein, dual-functionalized micron-sized surface-active composite polymer particles were prepared by a three-step process for CO2 adsorption. First, polystyrene (PS) seed particles were prepared via the dispersion polymerization of styrene. PS/P(MMA-AAm-EGDMA) composite polymer particles were then synthesized by aqueous seeded copolymerization of methyl methacrylate (MMA) and acrylamide (AAm) in the presence of an ethylene glycol dimethacrylate (EGDMA) cross-linker. Finally, the amide moieties of PS/P(MMA-AAm-EGDMA) composite particles were converted into an amine-functionalized composite by using the Hofmann degradation reaction. The presence of primary amine groups on the surface of aminated composite particles was confirmed by some conventional chemical routes, such as diazotization and Schiff's base formation reactions. The formation and functionality of the PS seed, PS/P(MMA-AAm-EGDMA), and aminated PS/P(MMA-AAm-EGDMA) composite polymer particles were confirmed by Fourier transform infrared (FTIR) spectra analyses. Scanning electron microscopy (SEM) analysis revealed spherical shape, size, and surface morphologies of the PS seed, reference composite, and aminated composites. The elemental surface compositions, surface porosity, pore volume, pore diameter, and surface area of both composite particles were evaluated by energy-dispersive X-ray (EDX) mapping, X-ray photoelectron spectroscopy, and Brunauer-Emmett-Teller (BET) and Barrett-Joyner-Halenda (BJH) analyses. Dynamic light scattering (DLS) and zeta-potential measurements confirmed the pH-dependent surface properties of the functionalized particles. The amount of the adsorbed anionic emulsifier, sodium dodecyl sulfate (SDS), on the surface of aminated PS/P(MMA-AAm-EGDMA) is higher at pH 4 than that at pH 10. A vice versa result was found in the case of cationic surfactant, hexadecyltrimethylammonium bromide (HTABr), adsorption. Synthesized aminated composite particles were used as an adsorbent for CO2 adsorption via bubbling CO2 in an aqueous medium. The changes in dispersion pH were monitored continuously during the adsorption of CO2 under various conditions. The amount of CO2 adsorption by aminated composite particles was found to be 209 mg/g, which is almost double that of reference composite particles.
- 4 July 2023
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 47 (30) , 14534-14550
Synthesis and functionalization of zinc phosphate@polyglycidyl methacrylate composites for antimicrobial drug immobilization and controlled release: an in vitro study
Nowadays, the development of functional polymer-coated inorganic composite particles is an important topic of investigation for biomedical applications. Although several studies have tried to design hybrid nanocomposites, this study aimed to synthesize functionalized and colloidally stable ZnP composites for bio-related applications. Herein, a facile three-step method was used to synthesize carboxyl and amine functionalized polyglycidyl methacrylate (PGMA) coated zinc phosphate (ZnP@PGMA) particles. First, ZnP particles were synthesized using an aqueous precipitation method. Then, the synthesized ZnP particles were coated with PGMA via aqueous seeded free-radical polymerization of GMA. PGMA-coating significantly reduced the aggregation tendency of ZnP nanoparticles in aqueous medium. Finally, the surface of ZnP@PGMA particles was further functionalized with L-cysteine (Cys) and diethylenetriamine (DETA) to increase the hydrophilicity and surface functionality of the composite particles. Fourier transform infrared, energy dispersive X-ray, and X-ray photoelectron spectroscopic analyses confirmed the formation and functionalization of ZnP@PGMA particles. An X-ray diffraction study revealed the tetrahedral hopeite structure of ZnP particles, and their further functionalization did not alter the initial crystal lattice structure. Scanning electron and transmission electron micrographs showed that the ZnP particles were indeed spherical nanoparticles although the polymerization and functionalization processes significantly altered their morphologies. Thermogravimetric analysis revealed the thermal degradation of the polymeric matrix as well as the stability of ZnP particles and their functionalized composites. An in vitro trypsin adsorption study indicated a minimal amount of adsorption on the carboxy-amine surface-modified composites compared with that on unfunctionalized ZnP@PGMA particles. Next, the antibacterial drug, ceftriaxone sodium (CFX), was physically immobilized onto the surface of carboxyl and amine functionalized composite particles. An in vitro drug release study showcased sustained release kinetics of the loaded-CFX molecules. Finally, in vitro antibacterial assay of the CFX-loaded composite particles against two different bacterial strains, namely Bacillus cereus and Pseudomonas aeruginosa, showed significant inhibition of bacterial growth in agar media. Hence, carboxyl and amine functionalized ZnP@PGMA composite particles can be used as an effective drug-delivery agent against multi-drug-resistant bacterial infections.
- 4 July 2023
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 47 (30) , 14534-14550
Synthesis and functionalization of zinc phosphate@polyglycidyl methacrylate composites for antimicrobial drug immobilization and controlled release: an in vitro study
Nowadays, the development of functional polymer-coated inorganic composite particles is an important topic of investigation for biomedical applications. Although several studies have tried to design hybrid nanocomposites, this study aimed to synthesize functionalized and colloidally stable ZnP composites for bio-related applications. Herein, a facile three-step method was used to synthesize carboxyl and amine functionalized polyglycidyl methacrylate (PGMA) coated zinc phosphate (ZnP@PGMA) particles. First, ZnP particles were synthesized using an aqueous precipitation method. Then, the synthesized ZnP particles were coated with PGMA via aqueous seeded free-radical polymerization of GMA. PGMA-coating significantly reduced the aggregation tendency of ZnP nanoparticles in aqueous medium. Finally, the surface of ZnP@PGMA particles was further functionalized with L-cysteine (Cys) and diethylenetriamine (DETA) to increase the hydrophilicity and surface functionality of the composite particles. Fourier transform infrared, energy dispersive X-ray, and X-ray photoelectron spectroscopic analyses confirmed the formation and functionalization of ZnP@PGMA particles. An X-ray diffraction study revealed the tetrahedral hopeite structure of ZnP particles, and their further functionalization did not alter the initial crystal lattice structure. Scanning electron and transmission electron micrographs showed that the ZnP particles were indeed spherical nanoparticles although the polymerization and functionalization processes significantly altered their morphologies. Thermogravimetric analysis revealed the thermal degradation of the polymeric matrix as well as the stability of ZnP particles and their functionalized composites. An in vitro trypsin adsorption study indicated a minimal amount of adsorption on the carboxy-amine surface-modified composites compared with that on unfunctionalized ZnP@PGMA particles. Next, the antibacterial drug, ceftriaxone sodium (CFX), was physically immobilized onto the surface of carboxyl and amine functionalized composite particles. An in vitro drug release study showcased sustained release kinetics of the loaded-CFX molecules. Finally, in vitro antibacterial assay of the CFX-loaded composite particles against two different bacterial strains, namely Bacillus cereus and Pseudomonas aeruginosa, showed significant inhibition of bacterial growth in agar media. Hence, carboxyl and amine functionalized ZnP@PGMA composite particles can be used as an effective drug-delivery agent against multi-drug-resistant bacterial infections.
- Open Access
- 8 March 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (13) , 8043-8058
A facile aqueous production of bisphosphonated-polyelectrolyte functionalized magnetite nanoparticles for pH-specific targeting of acidic-bone cells
Synthesis of a bisphosphonated polyelectrolytic stabilizer to in situ fabricate and functionalize Fe 3 O 4 nanoparticles and their pH-dependent hemolysis and bone-cell adhesion.
- 8 March 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (13) , 8043-8058
Open AccessA facile aqueous production of bisphosphonated-polyelectrolyte functionalized magnetite nanoparticles for pH-specific targeting of acidic-bone cells
Synthesis of a bisphosphonated polyelectrolytic stabilizer to in situ fabricate and functionalize Fe 3 O 4 nanoparticles and their pH-dependent hemolysis and bone-cell adhesion.