Landi Bai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Landi Bai has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Ningde Jin
Tianjin University
17 shared publications - Ziyan Tang
School of Electrical and Information Engineering, Tianjin University, Tianjin, China
8 shared publications - Weikai Ren
Institute of Energy, Peking University, Beijing, China
5 shared publications - Bin Jiang
School of Electrical and Information Engineering, Tianjin University, Tianjin, China
4 shared publications - Jiachen Zhang
School of Electrical and Information Engineering, Tianjin University, Tianjin 300072, People's Republic of China
4 shared publications - Jidong Wei
School of Electrical and Information Engineering, Tianjin University, Tianjin, China
4 shared publications
Latest Publications
- Open Access
- 1 April 2026
- Published by KEAI Publishing in Petroleum Science
Ultrasonic velocity-based model for water holdup prediction in polymer-oil-water flows
- 1 April 2026
- Published by KEAI Publishing in Petroleum Science
Open AccessUltrasonic velocity-based model for water holdup prediction in polymer-oil-water flows
- Open Access
- 1 March 2026
- Published by KEAI Publishing in Petroleum Science
- Vol. 23 (3) , 1319-1334
Dual-modality microwave-conductivity sensing system for flow characterization in high water-cut production wells
- 1 March 2026
- Published by KEAI Publishing in Petroleum Science
- Vol. 23 (3) , 1319-1334
Open AccessDual-modality microwave-conductivity sensing system for flow characterization in high water-cut production wells
- 7 February 2026
- Published by Elsevier in Chinese Journal of Chemical Engineering
- Vol. 93, 330-351
Experimental and numerical studies of holdup and velocity behavior for inclined bubbly oil-water pipe flows
- 7 February 2026
- Published by Elsevier in Chinese Journal of Chemical Engineering
- Vol. 93, 330-351
Experimental and numerical studies of holdup and velocity behavior for inclined bubbly oil-water pipe flows
- 15 October 2025
- Published by Elsevier in Ultrasonics
- Vol. 159, 107868
Modelling of ultrasonic velocity for measuring water holdup in vertical upward oil-water two-phase flow
- 15 October 2025
- Published by Elsevier in Ultrasonics
- Vol. 159, 107868
Modelling of ultrasonic velocity for measuring water holdup in vertical upward oil-water two-phase flow
- 18 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (20) , 38521-38529
Flow Pattern Identification of Inclined Oil–Water Two-Phase Flow Using Generalized Magnitude and Sign Correlations
The oil-water two-phase flow in an inclined pipe exhibits fundamentally complicate behavior due to the effects of shear induced turbulence and droplet induced turbulence. As a result, internal waves with intermittent growth or attenuation are generated, and the resulting changes in flow pattern along the pipe diameter direction are difficult to accurately identify. We conducted oil-water two-phase flow experiment in an upward oil in water flow pipe (20 mm inner diameter, 3771 mm long) that was inclined at 45° to the vertical, then the differential pressure signals (DPS), the eight mini-conductance probes signals and the snapshots of the fluids taken by high-speed camera are collected in the test section of flow loop. We proposed an approach for analyzing the signals with generalized magnitude and sign correlations and extracting their scaling properties. We find that the scaling exponents from magnitude and sign series are sensitive to the flow pattern transition and can satisfactorily identify the four water-dominated, including dispersion of oil in water-countercurrent (D O/W CT), dispersion of oil in water-pseudo-slugs (D O/W PS), very fine dispersion of oil-in-water (VFD O/W), and dispersion of oil in water-cocurrent (D O/W CC). The study shows that the generalized magnitude and sign correlations can be a useful approach to analyze the nonlinear time series of complex multiphase flow systems.
- 18 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (20) , 38521-38529
Flow Pattern Identification of Inclined Oil–Water Two-Phase Flow Using Generalized Magnitude and Sign Correlations
The oil-water two-phase flow in an inclined pipe exhibits fundamentally complicate behavior due to the effects of shear induced turbulence and droplet induced turbulence. As a result, internal waves with intermittent growth or attenuation are generated, and the resulting changes in flow pattern along the pipe diameter direction are difficult to accurately identify. We conducted oil-water two-phase flow experiment in an upward oil in water flow pipe (20 mm inner diameter, 3771 mm long) that was inclined at 45° to the vertical, then the differential pressure signals (DPS), the eight mini-conductance probes signals and the snapshots of the fluids taken by high-speed camera are collected in the test section of flow loop. We proposed an approach for analyzing the signals with generalized magnitude and sign correlations and extracting their scaling properties. We find that the scaling exponents from magnitude and sign series are sensitive to the flow pattern transition and can satisfactorily identify the four water-dominated, including dispersion of oil in water-countercurrent (D O/W CT), dispersion of oil in water-pseudo-slugs (D O/W PS), very fine dispersion of oil-in-water (VFD O/W), and dispersion of oil in water-cocurrent (D O/W CC). The study shows that the generalized magnitude and sign correlations can be a useful approach to analyze the nonlinear time series of complex multiphase flow systems.
- 11 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Ultrasonic Attenuation Model of Gas Holdup in Polydisperse Gas–Liquid Two-Phase Bubbly Flows
The measurement of gas holdup in polydisperse gas–liquid bubbly flows presents significant challenges due to complex interfacial dynamics and variable bubble size distributions that critically influence ultrasonic attenuation characteristics. This study develops an improved ultrasonic attenuation model that systematically accounts for bubble size distribution effects to achieve accurate gas holdup prediction. The research integrates ultrasonic attenuation measurements obtained using 2.25-MHz probes with high-speed imaging-based bubble size characterization through a custom fluid sampler. By employing maximum likelihood estimation, we establish robust statistical correlations between ultrasonic attenuation patterns and bubble size distributions, leading to the development of an equivalent cross section scattering model specifically designed for polydisperse systems. Comprehensive experimental validation demonstrates the model’s superior performance compared to conventional MCBL, Qian, and Stravs-Ren average models, with an absolute average percentage deviation (AAPD) of 3.6%. The proposed approach offers a significant advancement in multiphase flow measurement by enabling noninvasive determination of both gas holdup and bubble size distribution characteristics.
- 11 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Ultrasonic Attenuation Model of Gas Holdup in Polydisperse Gas–Liquid Two-Phase Bubbly Flows
The measurement of gas holdup in polydisperse gas–liquid bubbly flows presents significant challenges due to complex interfacial dynamics and variable bubble size distributions that critically influence ultrasonic attenuation characteristics. This study develops an improved ultrasonic attenuation model that systematically accounts for bubble size distribution effects to achieve accurate gas holdup prediction. The research integrates ultrasonic attenuation measurements obtained using 2.25-MHz probes with high-speed imaging-based bubble size characterization through a custom fluid sampler. By employing maximum likelihood estimation, we establish robust statistical correlations between ultrasonic attenuation patterns and bubble size distributions, leading to the development of an equivalent cross section scattering model specifically designed for polydisperse systems. Comprehensive experimental validation demonstrates the model’s superior performance compared to conventional MCBL, Qian, and Stravs-Ren average models, with an absolute average percentage deviation (AAPD) of 3.6%. The proposed approach offers a significant advancement in multiphase flow measurement by enabling noninvasive determination of both gas holdup and bubble size distribution characteristics.
- 4 June 2025
- Published by Elsevier in Flow Measurement and Instrumentation
- Vol. 106
Microwave measurement method for water holdup in horizontal oil-water two-phase flow
- 4 June 2025
- Published by Elsevier in Flow Measurement and Instrumentation
- Vol. 106
Microwave measurement method for water holdup in horizontal oil-water two-phase flow