CXChong Xia

Chong Xia

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chong Xia has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Thermodynamic analysis of the potential application of methanol steam reforming in marine internal combustion engines

    by Jie Shi, Yuanqing Zhu, Peilin Zhou, Chong Xia, Yongming Feng, Song Zhou

    The maritime industry is shifting from fossil fuels to alternatives to reduce pollutants and emissions. Integrating methanol steam reforming (MSR) with waste heat from internal combustion engines (ICE) optimizes combustion and efficiency. However, a comprehensive evaluation of this MSR-ICE system, especially regarding reforming capability and key performance indicators, has not been conducted. This study develops a process model of the MSR-ICE system to assess its potential for marine medium-speed engines. The effects of MSR reaction temperature, steam-to-carbon (S/C) ratio, and reforming ratio on system performance were analyzed. Results show the MSR-ICE system is thermodynamically feasible. Increasing the reforming ratio enhances efficiency, reducing fuel consumption and carbon emissions. However, the maximum reforming ratio is limited by MSR reaction temperature and S/C ratio. For instance, at 160°C with S/C = 1, the maximum reforming ratio is 0.6, while at 240°C, it drops to 0.3. Optimization strategies include low-temperature reforming, maximizing the reforming ratio, and controlling the S/C ratio.


  • Combined removal experiment of NOx, SO2 and PM from marine diesel exhaust gas with SCR-DryEGCS system

    by Jie Shi, Yuanqing Zhu, Jun Yang, Chong Xia, Yongming Feng, Song Zhou

    Pollutants such as nitrogen oxides (NOx), sulfur oxides (SO2), and particulate matter (PM) in ship exhaust have a great impact on human health, environment and climate conditions. Combined selective catalytic reduction technology and dry exhaust gas cleaning technology, a test rig (SCR-DryEGCS system) for WD10C195-15 marine four-stroke high speed diesel engine was established to analyse the removal effect of NOx, SO2, and PM from exhaust gas. The SCR-DryEGCS system removed 89.03%, 99%, and 96% of NOx, SO2, and PM respectively. And also compared with low sulfur oil combined SCR method to verify the feasibility of the SCR-DryEGCS method. It shows that the SCR-DryEGCS system has its own advantages and has a good effect on the removal of NOx, SOx, and PM at the same time.


  • Investigation on the applicability of parameters identification of marine diesel engine SCR kinetic model based on Discrete-Grid algorithm

    by Chong Xia, Yuanqing Zhu, Majed Shreka, Guangwei Zhang, Song Zhou, Yongming Feng, Jie Shi

    Selective catalytic reduction (SCR) technology is the most widely used denitrification method in industry. However, the calibration of its kinetic model is very problematic due to the large number of parameters involved and the nonlinear characteristics, especially for the undesired reactions such as formation-decomposition of ammonium nitrate (AN), ammonium sulfate (AS), ammonium bisulfate (ABS), etc. In this paper, the synthetic gas test bench and the SCR system of WD10 marine diesel engine burning high-sulfur fuel oil (HSFO) and low-sulfur fuel oil (LSFO) are taken as the research objects. Firstly, based on the experimental data obtained from the synthetic gas test bench, the pre-exponential multiplier and activation energy of each reaction were identified using the Discrete-Grid algorithm. In this work, considering that the production of N2O, SO3, AN, AS, and ABS in the undesired reactions is very low, not on the same order of magnitude as that of NO and NH3, it is easy to overlook their reaction characteristics in the optimization process. We have adopted an approach that amplifies the error between the predicted concentration and the observed concentration of the species to solve this problem. Secondly, a detailed and complete SCR kinetic model was constructed. Finally, with the parameter identification results obtained from the synthesis gas bench as initial values, all the kinetic parameters of the WD10 marine engine SCR model was calibrated simultaneously using the Discrete-Grid algorithm. The results showed that the SCR kinetic model derived from the synthetic gas test bench was suitable for the real marine engine SCR system when the range of temperature and space velocity (SV) of the synthetic gas bench test is similar to that of the marine SCR system.


  • Investigation on control strategy optimisation of harsh transient condition for a marine natural gas engine

    by Chong Xia, Wei Zhang, Yongming Feng, Tong Wang, Yuanqing Zhu, Majed Shreka, Xuefei Wu, Weijian Zhou

    Under the dual crisis of energy shortage and environmental pollution, natural gas has become a promising alternative fuel. However, its application in marine engines still has some problems such as knocking and misfire in the cylinder, especially during the harsh transient condition of the main engine, which the transient speed regulation rate should be less than 15%, and the speed recovery time should be less than 15s to meet the corresponding specification requirements. In this paper, the 8M23G marine four-stroke natural gas engine is taken as the research object. And, the harsh transient condition of the engine under two modes of load characteristics and propulsion characteristics was analyzed through experiment and simulation. The results showed that the cooperative control strategy had the best effect, which decreased the Lambda of the engine to less than 3.5. Furthermore, the speed recovery time under load characteristics can be controlled at about 10 s.


  • Simulation study on transient performance of a marine engine matched with high-pressure SCR system

    by Chong Xia, Yuanqing Zhu, Song Zhou, Hui Peng, Yongming Feng, Weihao Zhou, Jie Shi, Jin Zhang

    The high-pressure SCR system is suitable for low-speed marine engines that burn high-sulfur fuel, but it will cause the increase of the exhaust back pressure of main engine, which will affect the main engine’s performance and fuel consumption. At the same time, due to the large weight and size of the SCR reactor, the overall heat storage performance of the SCR reactor is large, which makes the temperature difference between the front and back of the turbine in the start-up and shutdown of the main engine and transient conditions, affecting the transient response performance of the turbine. In this paper, 6S46ME marine low-speed diesel engine and its high-pressure SCR system are taken as the research object, the co-simulation model is constructed by using GT-Suite coupled with a programming software, and the accuracy of the test model is verified. The influence of high-pressure SCR system on the performance of main engine is analyzed, and it finds that the fuel consumption of the main engine at low load increases significantly greater than that at high load, and the exhaust temperature of the main engine changes differently at different loads. On this basis, the co-simulation model was used to analyze the matching performance of high-pressure SCR system under the transient conditions such as the main engine Tier II/Tier III mode switching process, fast-loading, normal-loading and fast-unloading. The results show that the slow cut-in/cut-out of SCR reactor is beneficial to the stable operation of the main engine system, and the cut-in/cut-out time of high-pressure SCR system greatly affects the transient fuel consumption of the main engine, and the maximum increase of fuel consumption is about 3.6 g/kW·h; In addition, the thermal inertia of the reactor has a greater impact on the performance of the main engine at low load, but not at high load.