Zijian Mao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zijian Mao has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Laifa Lu
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310023, China
2 shared publications - Shuiqing Zhou
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310023, China
2 shared publications - Shuiqing Zhou
College of Mechanical Engineering, Zhejiang University of Technology, 18 Chaowang Road, Hangzhou 310032, China
2 shared publications - Weiya Jin
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310032, China
2 shared publications - Zhenghui Wu
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310023, China
2 shared publications - A. Tianle Zhang
College of Mechanical Engineering, Zhejiang University of Technology , Hangzhou 310023
1 shared publication
Latest Publications
- Open Access
- 10 March 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (6) , 2651
Aerodynamic Optimization of Shroudless Cooling Centrifugal Fan Blades for Motors Using a GA-Kriging Model
Large-scale backward-curved centrifugal fans without volutes are extensively employed in enclosed air-cooled electric motors owing to their exceptional heat dissipation performance. This category of fans features substantial blade dimensions and a multitude of optimization parameters, which introduce challenges such as diminished predictive accuracy in high-dimensional optimization spaces. To address these issues, this paper proposes a blade optimization design methodology based on a GA-Kriging surrogate model. Sobol’s global sensitivity analysis is first employed to reduce model dimensionality. Subsequently, a high-fidelity aerodynamic performance prediction model is constructed through the integration of a Genetic Algorithm (GA) and a Kriging model. A constrained optimization is then conducted with volumetric flow rate and static pressure as the design objectives, and shaft power along with geometric point coordinates as the constraints. Experimental test results demonstrate that the fan optimized via the surrogate model, while maintaining low prediction error, achieves a 14% increase in volumetric flow rate and a 20% improvement in static pressure. This outcome indicates a significant enhancement in the overall aerodynamic performance.
- 10 March 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (6) , 2651
Open AccessAerodynamic Optimization of Shroudless Cooling Centrifugal Fan Blades for Motors Using a GA-Kriging Model
Large-scale backward-curved centrifugal fans without volutes are extensively employed in enclosed air-cooled electric motors owing to their exceptional heat dissipation performance. This category of fans features substantial blade dimensions and a multitude of optimization parameters, which introduce challenges such as diminished predictive accuracy in high-dimensional optimization spaces. To address these issues, this paper proposes a blade optimization design methodology based on a GA-Kriging surrogate model. Sobol’s global sensitivity analysis is first employed to reduce model dimensionality. Subsequently, a high-fidelity aerodynamic performance prediction model is constructed through the integration of a Genetic Algorithm (GA) and a Kriging model. A constrained optimization is then conducted with volumetric flow rate and static pressure as the design objectives, and shaft power along with geometric point coordinates as the constraints. Experimental test results demonstrate that the fan optimized via the surrogate model, while maintaining low prediction error, achieves a 14% increase in volumetric flow rate and a 20% improvement in static pressure. This outcome indicates a significant enhancement in the overall aerodynamic performance.
- Open Access
- 24 March 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (7) , 3521
Analysis and Optimization Design of Internal Flow Evolution of Large Centrifugal Fans Under Inlet Distortion Effects
Large curvature, high pre-swirl large high-speed centrifugal fans are the preferred choice for industrial gas quenching furnaces, as they need to operate under non-uniform inlet conditions for extended periods. The resulting inlet distortion disrupts the symmetric flow of the gas, leading to reduced fan stability and phenomena such as flow separation and rotational stall. This issue has become a key research focus in the field of large centrifugal fan applications. This paper introduces an eddy viscosity correction method, and compares it with experimental results from U-shaped pipe curved flow. The corrected SST k-ω model shows a maximum error of only 4.7%. Simulation results show that the fan inlet generates a positive pre-swirl inflow with a relative distortion intensity of 3.83°. The flow characteristics within the impeller passage are significantly affected by the swirl angle distribution. At the maximum swirl angle, the leakage flow at the blade tip develops into a stall vortex that spans the entire passage, with an average blockage coefficient of 0.29. At the minimum swirl angle, the downstream leakage flow at the blade tip is suppressed on the suction side by the main flow, leading to a reduced vortex structure within the passage and an average blockage coefficient of 0.21. To address the design challenges of large high-speed centrifugal fans under inlet distortion, a blade design method based on secondary flow suppression is proposed. Eleven impeller flow surfaces are selected as control parameters, and the centrifugal impeller blade profile is redesigned. Numerical simulations and experimental results of the gas quenching furnace’s flow and temperature fields indicate that the modified impeller significantly reduces the blade tip leakage flow strength, with the average blockage coefficient decreasing to 0.07 and 0.04, respectively. The standard deviation of the average flow velocity at the test section is reduced by 42.78% compared to the original, and the temperature fluctuation at the workpiece surface is reduced by 53.09%. Both the flow and temperature field uniformity are significantly improved.
- 24 March 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (7) , 3521
Open AccessAnalysis and Optimization Design of Internal Flow Evolution of Large Centrifugal Fans Under Inlet Distortion Effects
Large curvature, high pre-swirl large high-speed centrifugal fans are the preferred choice for industrial gas quenching furnaces, as they need to operate under non-uniform inlet conditions for extended periods. The resulting inlet distortion disrupts the symmetric flow of the gas, leading to reduced fan stability and phenomena such as flow separation and rotational stall. This issue has become a key research focus in the field of large centrifugal fan applications. This paper introduces an eddy viscosity correction method, and compares it with experimental results from U-shaped pipe curved flow. The corrected SST k-ω model shows a maximum error of only 4.7%. Simulation results show that the fan inlet generates a positive pre-swirl inflow with a relative distortion intensity of 3.83°. The flow characteristics within the impeller passage are significantly affected by the swirl angle distribution. At the maximum swirl angle, the leakage flow at the blade tip develops into a stall vortex that spans the entire passage, with an average blockage coefficient of 0.29. At the minimum swirl angle, the downstream leakage flow at the blade tip is suppressed on the suction side by the main flow, leading to a reduced vortex structure within the passage and an average blockage coefficient of 0.21. To address the design challenges of large high-speed centrifugal fans under inlet distortion, a blade design method based on secondary flow suppression is proposed. Eleven impeller flow surfaces are selected as control parameters, and the centrifugal impeller blade profile is redesigned. Numerical simulations and experimental results of the gas quenching furnace’s flow and temperature fields indicate that the modified impeller significantly reduces the blade tip leakage flow strength, with the average blockage coefficient decreasing to 0.07 and 0.04, respectively. The standard deviation of the average flow velocity at the test section is reduced by 42.78% compared to the original, and the temperature fluctuation at the workpiece surface is reduced by 53.09%. Both the flow and temperature field uniformity are significantly improved.
- Open Access
- 30 September 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (19) , 9858
Multi-Objective Optimization of Rear Guide Vane of Diagonal Flow Fan Based on Robustness Design Theory
As an essential fluid machine in national production, the optimal design of the performance of fans has long been a focus of research. In the format of small diagonal flow fans with rear guide vanes, there are too many design variables, and the design parameters interact with each other, resulting in a degradation of the fan’s performance under actual operating conditions. Under realistic conditions, many uncertainties exist in the object of study and fluctuations in variables and parameters lead to a specific deviation of the optimization target from the design target. A method is needed for the robust and optimal design of angular flow fans under stochastic operating conditions of the design variables. In this paper, a multi-objective aerodynamic performance powerful design method is proposed using Pearson correlation analysis, combined with CFD calculation method, Latin hypercube experimental design and the Kriging agent model, to optimize the rear guide vane structural parameters of the diagonal flow fan under uncertain aerodynamic performance conditions, analyze the flow field characteristics before and after the modification, and select the optimal design model for the release. The test results show that the total pressure of the optimized fan is increased by 86 Pa, and the noise is reduced by 2.4 dB. The proposed optimization method is effective and can also be used to optimize the performance of other types of fans.
- 30 September 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (19) , 9858
Open AccessMulti-Objective Optimization of Rear Guide Vane of Diagonal Flow Fan Based on Robustness Design Theory
As an essential fluid machine in national production, the optimal design of the performance of fans has long been a focus of research. In the format of small diagonal flow fans with rear guide vanes, there are too many design variables, and the design parameters interact with each other, resulting in a degradation of the fan’s performance under actual operating conditions. Under realistic conditions, many uncertainties exist in the object of study and fluctuations in variables and parameters lead to a specific deviation of the optimization target from the design target. A method is needed for the robust and optimal design of angular flow fans under stochastic operating conditions of the design variables. In this paper, a multi-objective aerodynamic performance powerful design method is proposed using Pearson correlation analysis, combined with CFD calculation method, Latin hypercube experimental design and the Kriging agent model, to optimize the rear guide vane structural parameters of the diagonal flow fan under uncertain aerodynamic performance conditions, analyze the flow field characteristics before and after the modification, and select the optimal design model for the release. The test results show that the total pressure of the optimized fan is increased by 86 Pa, and the noise is reduced by 2.4 dB. The proposed optimization method is effective and can also be used to optimize the performance of other types of fans.
- Open Access
- 16 March 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (6) , 3029
Research on Multi-Optimal Project of Outlet Guide Vanes of Nuclear Grade Axial Flow Fan Based on Sensitivity Analysis
Nuclear grade axial flow fans are widely used in nuclear power plants for ventilation and heat dissipation and have the advantages of high efficiency and high flow rates. A nuclear grade axial flow fan with OGVs (outlet guide vanes) can recover the kinetic energy of the dynamic impeller outlet winding to increase the ventilator pressure, thus improving the ventilator efficiency; therefore, the OGVs play an essential role in the performance of the axial flow fan. Based on accurate numerical simulations, an MRGP approximation model was developed to analyse the factors affecting the OGVs duct and optimise the guide vane structure, combined with the Sobol method for sensitivity analysis. The experiments and numerical simulations show that the total pressure of the optimised model increases by 154 Pa, and the noise decreases by 4.1 dB. The multi-objective optimisation method using the parametric approach and combining it with the MRGP model is highly reliable. It provides a key design direction for optimising nuclear grade axial flow fans.
- 16 March 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (6) , 3029
Open AccessResearch on Multi-Optimal Project of Outlet Guide Vanes of Nuclear Grade Axial Flow Fan Based on Sensitivity Analysis
Nuclear grade axial flow fans are widely used in nuclear power plants for ventilation and heat dissipation and have the advantages of high efficiency and high flow rates. A nuclear grade axial flow fan with OGVs (outlet guide vanes) can recover the kinetic energy of the dynamic impeller outlet winding to increase the ventilator pressure, thus improving the ventilator efficiency; therefore, the OGVs play an essential role in the performance of the axial flow fan. Based on accurate numerical simulations, an MRGP approximation model was developed to analyse the factors affecting the OGVs duct and optimise the guide vane structure, combined with the Sobol method for sensitivity analysis. The experiments and numerical simulations show that the total pressure of the optimised model increases by 154 Pa, and the noise decreases by 4.1 dB. The multi-objective optimisation method using the parametric approach and combining it with the MRGP model is highly reliable. It provides a key design direction for optimising nuclear grade axial flow fans.