Lorenzo Valletti
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lorenzo Valletti has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Franco Di Paolo
University of Rome Tor Vergata
4 shared publications - Stefano Fantauzzi
Department of Electronic Engineering, University of Rome Tor Vergata Rome, Italy
4 shared publications - Alberto Leggieri
THALES Microwave and Imaging Subsystems, 78140 Velizy-Villacoublay, France
1 shared publication - Bruno Spataro
Laboratori Nazionale di Frascati, Istituto Nazionale di Fisica Nucleare, Via Enrico Fermi 54, 00044 Frascati, Italy
1 shared publication - Emanuele Brenna
University of Roma Tor Vergata, Italy
1 shared publication - Fabrizio Marrese
Università degli Studi di Roma “Tor Vergata”, Italy
1 shared publication
Latest Publications
- 9 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (4) , 375-378
Waveguide-to-Microstrip Nonbinary Power Dividers
A novel spatial power combiner (SPC), exploiting nonbinary and odd power divisions and working in full Ka -band, is designed and measured in this letter. Starting from the theory that rules the power division captured by the waveguide-to-microstrip transitions with different power division factors, a full 3-D EM model has been created and simulated along with a working manufactured prototype. The measurements demonstrated how all the broadband transmission characteristics of the Finline transitions ( S 11 $>$ 10 dB and minimum losses) are preserved, also avoiding any resonant behavior possibly introduced by the nonsymmetry of the structure. This is the first example of a non-TEM and non-Radial SPC with nonbinary power division. In this case, a power division/recombination by five has been performed.
- 9 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (4) , 375-378
Waveguide-to-Microstrip Nonbinary Power Dividers
A novel spatial power combiner (SPC), exploiting nonbinary and odd power divisions and working in full Ka -band, is designed and measured in this letter. Starting from the theory that rules the power division captured by the waveguide-to-microstrip transitions with different power division factors, a full 3-D EM model has been created and simulated along with a working manufactured prototype. The measurements demonstrated how all the broadband transmission characteristics of the Finline transitions ( S 11 $>$ 10 dB and minimum losses) are preserved, also avoiding any resonant behavior possibly introduced by the nonsymmetry of the structure. This is the first example of a non-TEM and non-Radial SPC with nonbinary power division. In this case, a power division/recombination by five has been performed.
- Open Access
- 1 June 2023
- Published by FapUNIFESP (SciELO) in Journal of Microwaves, Optoelectronics and Electromagnetic Applications
- Vol. 22 (2) , 280-289
A New Theoretical Approach of Studying Resonances in Single Finline Transitions
In this article an innovative method of studying and removing the resonances, inherently exhibit by some waveguide to microstrip transitions, is presented. By modeling an equivalent circuit, this new approach allows to obtain the constructive parameters of a finline to microstrip transition, only using the values of the resistance and capacitance components of the equivalent circuit. This procedure will allow small microwave design Companies to realize these transitions only implementing circuit analysis software, and not having to afford electromagnetic analysis software, which are very expensive and time-consuming. A full 3D electromagnetic analysis confirms that the simulation results are in excellent agreement with the results obtained by the new equations discussed in this work.
- 1 June 2023
- Published by FapUNIFESP (SciELO) in Journal of Microwaves, Optoelectronics and Electromagnetic Applications
- Vol. 22 (2) , 280-289
Open AccessA New Theoretical Approach of Studying Resonances in Single Finline Transitions
In this article an innovative method of studying and removing the resonances, inherently exhibit by some waveguide to microstrip transitions, is presented. By modeling an equivalent circuit, this new approach allows to obtain the constructive parameters of a finline to microstrip transition, only using the values of the resistance and capacitance components of the equivalent circuit. This procedure will allow small microwave design Companies to realize these transitions only implementing circuit analysis software, and not having to afford electromagnetic analysis software, which are very expensive and time-consuming. A full 3D electromagnetic analysis confirms that the simulation results are in excellent agreement with the results obtained by the new equations discussed in this work.
- Open Access
- 18 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (7) , 3864-3871
Innovative Mode Enhancement for High Power Coaxial Vircators
The size and weight of a high power microwave (HPM) source can make a difference in strategic use. The compactness of the virtual cathode oscillator (vircator) is undoubtedly the most significant advantage of this device. Civil industry and agriculture can use it to treat objects, food, and soils for disinfestation and disinfection. Vircators could also generate electromagnetic pulses (EMPs) to force the arrest of vehicles and drones; EMPs could inhibit or activate improvised explosive devices (IEDs). The coaxial type vircator is a highly compact device. Due to its symmetric geometry, coaxial vircator is typically designed to work with a TM 01 mode. Still, when radiated into space, this mode gives maximum RF energy away from the antenna axis, a situation not desired. Instead, the TE 11 is convenient in applications involving precise antenna pointing since this mode gives a maximum RF energy precisely aligned to the antenna axis. By studying Mathieu functions applied to elliptical waveguides, we improve the performances of a TE 11 mode coaxial vircator using an elliptic drift tube (EDT). This is a completely innovative solution to reduce the mode competition inside the coaxial vircator. The rms and peak output power efficiency of the EDT coaxial vircator were measured on the TE 11 mode, obtaining the values of 6.1% and 10%, respectively, with a peak power of 450 MW in a highly compact device.
- 18 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (7) , 3864-3871
Open AccessInnovative Mode Enhancement for High Power Coaxial Vircators
The size and weight of a high power microwave (HPM) source can make a difference in strategic use. The compactness of the virtual cathode oscillator (vircator) is undoubtedly the most significant advantage of this device. Civil industry and agriculture can use it to treat objects, food, and soils for disinfestation and disinfection. Vircators could also generate electromagnetic pulses (EMPs) to force the arrest of vehicles and drones; EMPs could inhibit or activate improvised explosive devices (IEDs). The coaxial type vircator is a highly compact device. Due to its symmetric geometry, coaxial vircator is typically designed to work with a TM 01 mode. Still, when radiated into space, this mode gives maximum RF energy away from the antenna axis, a situation not desired. Instead, the TE 11 is convenient in applications involving precise antenna pointing since this mode gives a maximum RF energy precisely aligned to the antenna axis. By studying Mathieu functions applied to elliptical waveguides, we improve the performances of a TE 11 mode coaxial vircator using an elliptic drift tube (EDT). This is a completely innovative solution to reduce the mode competition inside the coaxial vircator. The rms and peak output power efficiency of the EDT coaxial vircator were measured on the TE 11 mode, obtaining the values of 6.1% and 10%, respectively, with a peak power of 450 MW in a highly compact device.
- Open Access
- 1 August 2022
- Published by Springer Nature in Journal of Infrared, Millimeter, and Terahertz Waves
- Vol. 43 (7-8) , 628-653
An Innovative Lens Type FinLine to Microstrip Transition
Due to the disadvantages of vacuum tubes in terms of warm-up time, size, and high-voltage needs, solid-state power amplifiers (SSPAs) with gallium nitride (GaN) monolithic microwave integrated circuits (MMICs) are the key solution for power levels up to some kilowatts in continuous wave. An SSPA is the most convenient solution for these RF power levels due to its low weight, small size, negligible warm-up time, low-voltage operation, and high reliability. Spatial power amplifiers (SPAs) combining techniques are the best candidates for SSPAs due to the intrinsic low attenuation in dividing and combining functions. SPAs mainly use two types of probes: transverse and longitudinal, such as FinLines. This paper describes a broadband FinLine to microstrip (FLuS) transition based on dielectric lens theory. Comparative simulations with traditional FinLine transitions show a significant improvement in matching performances and a very significant increase in mechanical resistance of the transition. The proposed innovative FLuS uses a substrate shaping designed according to dielectric lens theory. Frequency simulations of a FLuS inside the WR22 waveguide are shown. These evidence the better performances of this transition than the classic FLuS transition using quarter-wave transformer (QWT) matching. A Q band spatial power combiner with dielectric lens FLuS was made and measured, showing the excellent performances of this innovative FLuS transition.
- 1 August 2022
- Published by Springer Nature in Journal of Infrared, Millimeter, and Terahertz Waves
- Vol. 43 (7-8) , 628-653
Open AccessAn Innovative Lens Type FinLine to Microstrip Transition
Due to the disadvantages of vacuum tubes in terms of warm-up time, size, and high-voltage needs, solid-state power amplifiers (SSPAs) with gallium nitride (GaN) monolithic microwave integrated circuits (MMICs) are the key solution for power levels up to some kilowatts in continuous wave. An SSPA is the most convenient solution for these RF power levels due to its low weight, small size, negligible warm-up time, low-voltage operation, and high reliability. Spatial power amplifiers (SPAs) combining techniques are the best candidates for SSPAs due to the intrinsic low attenuation in dividing and combining functions. SPAs mainly use two types of probes: transverse and longitudinal, such as FinLines. This paper describes a broadband FinLine to microstrip (FLuS) transition based on dielectric lens theory. Comparative simulations with traditional FinLine transitions show a significant improvement in matching performances and a very significant increase in mechanical resistance of the transition. The proposed innovative FLuS uses a substrate shaping designed according to dielectric lens theory. Frequency simulations of a FLuS inside the WR22 waveguide are shown. These evidence the better performances of this transition than the classic FLuS transition using quarter-wave transformer (QWT) matching. A Q band spatial power combiner with dielectric lens FLuS was made and measured, showing the excellent performances of this innovative FLuS transition.
- Open Access
- 1 March 2022
- Published by FapUNIFESP (SciELO) in Journal of Microwaves, Optoelectronics and Electromagnetic Applications
- Vol. 21 (1) , 157-170
Multiphysics Design of High-Power Microwave Vacuum Window
- 1 March 2022
- Published by FapUNIFESP (SciELO) in Journal of Microwaves, Optoelectronics and Electromagnetic Applications
- Vol. 21 (1) , 157-170
Open AccessMultiphysics Design of High-Power Microwave Vacuum Window