ACAlberto Caneiro

Alberto Caneiro

*This is an algorithmically generated author record based on publicly available information.

Alberto Caneiro has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Correlative Approach for the Assessment of Porosity in Shale Rocks by Scanning Electron Microscopy

    by Federico Medina, Ignacio Jausoro, María Alejandra Floridia Addato, María Jimena Rodríguez, Alberto Caneiro

    A correlative approach to compute porosity at the nanoscale in areas as large as 3 mm × 3 mm through field emission scanning electron microscopy (FESEM) is presented. This approach overcomes the limitation of FESEM related to its representativeness on larger areas. The strategy is based on imaging an area of 3 mm × 3 mm where a set of regions of interest (ROIs) of 600 μm × 600 μm with similar mineralogy is selected and imaged. A second selection of areas of 150 μm × 150 μm inside the ROIs is performed. The three sets of images, linked through their mineralogy and organic matter, account for pore sizes within their given resolution range, providing an efficient computational method. The cumulative porosity plot, in addition of showing the contribution of the different pore sizes to the total porosity, enables the detection of fissures. The pore size distribution function allows to discuss the practical limit for counting small pores, around 30–40 nm for the samples studied in this work, under the given experimental conditions. This value is appreciably larger than the resolution of FESEM and the minimum pore size defined considering either 1 pixel/1 pore or 9 pixels/1 pore.

  • On the evaluation of Representative Elementary Area for porosity in shale rocks by Field Emission Scanning Electron Microscopy

    by Federico Javier Medina, Ignacio Jausoro, María Alejandra Floridia Addato, María Jimena Rodriguez, Federico González Tomassini, Alberto Caneiro


  • Oxygen Diffusion and Surface Exchange Coefficients of Porous La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3− δ Decorated with Co 3 O 4 Nanoparticles

    by J. Ascolani-Yael, A. Montenegro-Hernández, L. C. Baqué, L. M. Toscani, A. Caneiro, L. V. Mogni

    This work presents a comparative study of the diffusion D c h e m and surface exchange coefficients k c h e m of porous La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3− δ (LSCF) and Co 3 O 4 nanoparticles decorated LSCF electrodes. The study was carried out using the 3DT-EIS method, which combines Electrochemical Impedance Spectroscopy experiments with FIB-SEM tomography data through an adapted Transmission Line–Adler Lane Steele electrochemical model.A reduction of the polarization resistance of about 60% was measured for the Co 3 O 4 decorated LSCF respect to the reference LSCF cathode, in air at 700 °C. The Co 3 O 4 decoration was found to modify the ORR surface reaction limiting mechanism from O 2 dissociation to O-ion incorporation, whereas the diffusion coefficient was not modified by the decoration, which represents a surface diffusion process for both electrodes. After the EIS measurements, the Co 3 O 4 particles were almost no longer visible by Field-Emission SEM on the surface of the decorated sample, but signs that these particles play an active role in Sr Segregation were observed by STEM-EDS, in particular by concentrating the segregated SrO in the surroundings of the decorated particles.