Hanlin Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hanlin Wang has a total of 84 co-authors. Here are the top co-authors by number of shared publications:
Jiahao Zhao
University of Chinese Academy of Sciences
5 shared publications- Yunqi Liu
Chinese Academy of Sciences
5 shared publications - Zhenjie Ni
School of Chemical Sciences, University of Chinese Academy of Sciences, Beijing, 101408, China
5 shared publications Chenzhan Wang
University of Chinese Academy of Sciences
4 shared publications- Paolo Samorì
ISIS & icFRC University of Strasbourg & CNRS Strasbourg France
3 shared publications Wei Wen
Chinese Academy of Sciences
3 shared publications
Latest Publications
- 9 November 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
An Embedded Plasticization Strategy for Flexible Thermally Activated Delayed Fluorescence Polymers with High Luminance
Thermally activated delayed fluorescence (TADF) polymers offer the theoretical advantage of achieving 100% internal quantum efficiency. Together with their solution processability, TADF polymers are promising candidates for flexible display technologies. However, emissive polymers that simultaneously combine efficient TADF emission with mechanical flexibility remain rare. Here, we report an embedded plasticized linker strategy for mechanically compliant TADF polymers. Polyethylene glycol (PEG)-based flexible segments are covalently incorporated into acridine–benzophenone–carbazole polymer backbones. This “TADF unit + plasticized linker” design preserves the donor–acceptor electronic structure required for delayed fluorescence while introducing flexibility into the emissive polymer framework. The resulting polymers exhibit small singlet–triplet energy gaps, clear delayed fluorescence, and favorable film deformability. The deformation behavior of the neat polymer films was evaluated on PDMS substrates under an applied substrate strain of 75%. Notably, the optimized rigid organic light-emitting diode (OLED) based on PIDC(2,7)-EO achieves a maximum external quantum efficiency (EQE) of 20.1% and a high luminance of 85 988 cd m–2. This luminance value is among the highest reported for polymer-based TADF OLEDs. Flexible OLEDs fabricated on flexible substrates further deliver a maximum EQE of 14.7%. These results demonstrate efficient electroluminescence from flexible device architectures. This work establishes embedded plasticized linkers as an effective molecular design strategy for high-performance mechanically flexible TADF polymers. This strategy provides a promising route toward next-generation flexible OLED technologies.
- 9 November 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
An Embedded Plasticization Strategy for Flexible Thermally Activated Delayed Fluorescence Polymers with High Luminance
Thermally activated delayed fluorescence (TADF) polymers offer the theoretical advantage of achieving 100% internal quantum efficiency. Together with their solution processability, TADF polymers are promising candidates for flexible display technologies. However, emissive polymers that simultaneously combine efficient TADF emission with mechanical flexibility remain rare. Here, we report an embedded plasticized linker strategy for mechanically compliant TADF polymers. Polyethylene glycol (PEG)-based flexible segments are covalently incorporated into acridine–benzophenone–carbazole polymer backbones. This “TADF unit + plasticized linker” design preserves the donor–acceptor electronic structure required for delayed fluorescence while introducing flexibility into the emissive polymer framework. The resulting polymers exhibit small singlet–triplet energy gaps, clear delayed fluorescence, and favorable film deformability. The deformation behavior of the neat polymer films was evaluated on PDMS substrates under an applied substrate strain of 75%. Notably, the optimized rigid organic light-emitting diode (OLED) based on PIDC(2,7)-EO achieves a maximum external quantum efficiency (EQE) of 20.1% and a high luminance of 85 988 cd m–2. This luminance value is among the highest reported for polymer-based TADF OLEDs. Flexible OLEDs fabricated on flexible substrates further deliver a maximum EQE of 14.7%. These results demonstrate efficient electroluminescence from flexible device architectures. This work establishes embedded plasticized linkers as an effective molecular design strategy for high-performance mechanically flexible TADF polymers. This strategy provides a promising route toward next-generation flexible OLED technologies.
- 9 November 2026
- Published by American Chemical Society (ACS) in Macromolecules
α-Diimine Ligand Modulated Direct Arylation Polycondensation for Ultrahigh μC* Organic Mixed Conductors
Direct arylation polycondensation (DArP) has attracted extensive attention due to its simplified procedures and reduced chemical wastes in polymer synthesis. However, DArP for organic mixed ionic-electronic conductors (OMIECs) has remained a challenge due to scarcity of efficient ligands. Existing ligands, phosphines display inferior reactivity towards oligo(ethylene) glycol (OEG)-functionalised monomers due to competing coordination. Herein, to address this challenge, we innovate α-diimine modulated DArP, employing ligands that are readily synthesized by condensation of simple aromatic amines with glyoxal. The α-diimine ligands exhibit high catalytic reactivity in the DArP of OMIECs with a variety of chalconophenes, irrespective of their degree of aromaticity and electron density achieving yields over 80% and molecular weights higher than established DArP. More importantly, the realistic applicability of our α-diimine modulated DArP was validated by a furan-thiophene flanked, unsymmetric OMIEC was synthesized to exhibit a remarkable transconductance of 8.2 mS and a μC* value of 702.6 F cm−1 V−1 s−1. These results establish our α-diimine-Pd system as a robust platform for exploring electrochemically active conjugated polymers.
- 9 November 2026
- Published by American Chemical Society (ACS) in Macromolecules
α-Diimine Ligand Modulated Direct Arylation Polycondensation for Ultrahigh μC* Organic Mixed Conductors
Direct arylation polycondensation (DArP) has attracted extensive attention due to its simplified procedures and reduced chemical wastes in polymer synthesis. However, DArP for organic mixed ionic-electronic conductors (OMIECs) has remained a challenge due to scarcity of efficient ligands. Existing ligands, phosphines display inferior reactivity towards oligo(ethylene) glycol (OEG)-functionalised monomers due to competing coordination. Herein, to address this challenge, we innovate α-diimine modulated DArP, employing ligands that are readily synthesized by condensation of simple aromatic amines with glyoxal. The α-diimine ligands exhibit high catalytic reactivity in the DArP of OMIECs with a variety of chalconophenes, irrespective of their degree of aromaticity and electron density achieving yields over 80% and molecular weights higher than established DArP. More importantly, the realistic applicability of our α-diimine modulated DArP was validated by a furan-thiophene flanked, unsymmetric OMIEC was synthesized to exhibit a remarkable transconductance of 8.2 mS and a μC* value of 702.6 F cm−1 V−1 s−1. These results establish our α-diimine-Pd system as a robust platform for exploring electrochemically active conjugated polymers.
Scalable Patterning of Organic Electrochemical Transistors for Logic Gates and Neuromorphic Computing
Organic electrochemical transistors (OECTs) are promising building blocks for bioelectronics owing to their efficient ion–electron coupling, soft‐material compatibility and high transconductance. However, their large off‐state currents and poor scalability have so far limited high‐density integration and circuit‐level functionality. Here we introduce a patterning strategy suitable for solution‑processable organic semiconductors, enabling high‑fidelity OECT arrays with suppressed leakage and off‑state currents, on/off ratios up to 10 7 , and good device‑to‑device uniformity. Leveraging these patterned OECTs, we demonstrate the integration of logic circuits, including complementary inverters as well as NAND and NOR gates, exhibiting high voltage gain (up to 203 V/V), large noise margins (92.17%) and stable operation at low supply voltages. Benefiting from the patterning approach and the AlO x ‐induced suppression of off‐state current, the static power consumption of the inverter is reduced by approximately 90%. Beyond digital logic, we further show that these devices emulate key synaptic functions such as short‐term plasticity and enable reservoir computing tasks, defining a manufacturable platform for integrated bioelectronic circuitry and neuromorphic architectures. This patterning strategy therefore provides a general route toward high‐density biointerfaces and next‐generation brain–computer interfaces.
Scalable Patterning of Organic Electrochemical Transistors for Logic Gates and Neuromorphic Computing
Organic electrochemical transistors (OECTs) are promising building blocks for bioelectronics owing to their efficient ion–electron coupling, soft‐material compatibility and high transconductance. However, their large off‐state currents and poor scalability have so far limited high‐density integration and circuit‐level functionality. Here we introduce a patterning strategy suitable for solution‑processable organic semiconductors, enabling high‑fidelity OECT arrays with suppressed leakage and off‑state currents, on/off ratios up to 10 7 , and good device‑to‑device uniformity. Leveraging these patterned OECTs, we demonstrate the integration of logic circuits, including complementary inverters as well as NAND and NOR gates, exhibiting high voltage gain (up to 203 V/V), large noise margins (92.17%) and stable operation at low supply voltages. Benefiting from the patterning approach and the AlO x ‐induced suppression of off‐state current, the static power consumption of the inverter is reduced by approximately 90%. Beyond digital logic, we further show that these devices emulate key synaptic functions such as short‐term plasticity and enable reservoir computing tasks, defining a manufacturable platform for integrated bioelectronic circuitry and neuromorphic architectures. This patterning strategy therefore provides a general route toward high‐density biointerfaces and next‐generation brain–computer interfaces.
- 15 July 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (38)
Tri‐Acceptor Skeleton Balancing Ambipolar Mixed Ionic‐Electronic Transport in Organic Conductors
Organic mixed ionic‐electronic conductors (OMIECs) are emerging materials for low‐power dissipation, high transconductance, and biocompatible semiconductor devices. To date, major efforts have been focused on p‐type OMIECs, while ambipolar and electron‐conducting counterparts remain underdeveloped. This disparity arises from the limited availability of robust conjugated skeletons capable of sustaining electrochemical reduction without compromising the electron transport pathways. In this work, we demonstrate a tri‐acceptor skeleton comprising diketopyrrolopyrrole‐benzothiadiazole‐diketopyrrolopyrrole (DBD) units, which concurrently facilitates electrochemical oxidation and reduction processes. Additionally, we modulate side chain chemistry by halving the density of oligoethylene glycol (OEG) moieties. This two‐dimensional (2D) tuning strategy achieves an optimal balance between ambipolar ionic and electronic transport properties, lowering the injection barrier for cations. hDBD‐2FT exhibits high apparent product of mobility and volumetric capacitance ( µC *), reaching 345.54 and 334.57 F cm −1 V −1 s −1 for p‐type and n‐type conduction, respectively, demonstrating its potential for ambipolar mixed transport. Leveraging its efficient mixed transport, we successfully demonstrate complementary inverters and electrocardiogram monitoring applications. Our findings validate the efficacy of the 2D tuning strategy in balancing mixed transport properties and are anticipated to stimulate the development of OMIECs exhibiting higher performance metrics and power efficiency.
- 15 July 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (38)
Tri‐Acceptor Skeleton Balancing Ambipolar Mixed Ionic‐Electronic Transport in Organic Conductors
Organic mixed ionic‐electronic conductors (OMIECs) are emerging materials for low‐power dissipation, high transconductance, and biocompatible semiconductor devices. To date, major efforts have been focused on p‐type OMIECs, while ambipolar and electron‐conducting counterparts remain underdeveloped. This disparity arises from the limited availability of robust conjugated skeletons capable of sustaining electrochemical reduction without compromising the electron transport pathways. In this work, we demonstrate a tri‐acceptor skeleton comprising diketopyrrolopyrrole‐benzothiadiazole‐diketopyrrolopyrrole (DBD) units, which concurrently facilitates electrochemical oxidation and reduction processes. Additionally, we modulate side chain chemistry by halving the density of oligoethylene glycol (OEG) moieties. This two‐dimensional (2D) tuning strategy achieves an optimal balance between ambipolar ionic and electronic transport properties, lowering the injection barrier for cations. hDBD‐2FT exhibits high apparent product of mobility and volumetric capacitance ( µC *), reaching 345.54 and 334.57 F cm −1 V −1 s −1 for p‐type and n‐type conduction, respectively, demonstrating its potential for ambipolar mixed transport. Leveraging its efficient mixed transport, we successfully demonstrate complementary inverters and electrocardiogram monitoring applications. Our findings validate the efficacy of the 2D tuning strategy in balancing mixed transport properties and are anticipated to stimulate the development of OMIECs exhibiting higher performance metrics and power efficiency.
- 15 July 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (38) , e5284622
Tri‐Acceptor Skeleton Balancing Ambipolar Mixed Ionic‐Electronic Transport in Organic Conductors
Organic mixed ionic‐electronic conductors (OMIECs) are emerging materials for low‐power dissipation, high transconductance, and biocompatible semiconductor devices. To date, major efforts have been focused on p‐type OMIECs, while ambipolar and electron‐conducting counterparts remain underdeveloped. This disparity arises from the limited availability of robust conjugated skeletons capable of sustaining electrochemical reduction without compromising the electron transport pathways. In this work, we demonstrate a tri‐acceptor skeleton comprising diketopyrrolopyrrole‐benzothiadiazole‐diketopyrrolopyrrole (DBD) units, which concurrently facilitates electrochemical oxidation and reduction processes. Additionally, we modulate side chain chemistry by halving the density of oligoethylene glycol (OEG) moieties. This two‐dimensional (2D) tuning strategy achieves an optimal balance between ambipolar ionic and electronic transport properties, lowering the injection barrier for cations. hDBD‐2FT exhibits high apparent product of mobility and volumetric capacitance ( µC *), reaching 345.54 and 334.57 F cm −1 V −1 s −1 for p‐type and n‐type conduction, respectively, demonstrating its potential for ambipolar mixed transport. Leveraging its efficient mixed transport, we successfully demonstrate complementary inverters and electrocardiogram monitoring applications. Our findings validate the efficacy of the 2D tuning strategy in balancing mixed transport properties and are anticipated to stimulate the development of OMIECs exhibiting higher performance metrics and power efficiency.
- 15 July 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (38) , e5284622
Tri‐Acceptor Skeleton Balancing Ambipolar Mixed Ionic‐Electronic Transport in Organic Conductors
Organic mixed ionic‐electronic conductors (OMIECs) are emerging materials for low‐power dissipation, high transconductance, and biocompatible semiconductor devices. To date, major efforts have been focused on p‐type OMIECs, while ambipolar and electron‐conducting counterparts remain underdeveloped. This disparity arises from the limited availability of robust conjugated skeletons capable of sustaining electrochemical reduction without compromising the electron transport pathways. In this work, we demonstrate a tri‐acceptor skeleton comprising diketopyrrolopyrrole‐benzothiadiazole‐diketopyrrolopyrrole (DBD) units, which concurrently facilitates electrochemical oxidation and reduction processes. Additionally, we modulate side chain chemistry by halving the density of oligoethylene glycol (OEG) moieties. This two‐dimensional (2D) tuning strategy achieves an optimal balance between ambipolar ionic and electronic transport properties, lowering the injection barrier for cations. hDBD‐2FT exhibits high apparent product of mobility and volumetric capacitance ( µC *), reaching 345.54 and 334.57 F cm −1 V −1 s −1 for p‐type and n‐type conduction, respectively, demonstrating its potential for ambipolar mixed transport. Leveraging its efficient mixed transport, we successfully demonstrate complementary inverters and electrocardiogram monitoring applications. Our findings validate the efficacy of the 2D tuning strategy in balancing mixed transport properties and are anticipated to stimulate the development of OMIECs exhibiting higher performance metrics and power efficiency.
- 6 March 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (10) , 10608-10616
Cu-Catalyzed Direct Arylation Polycondensation Achieving Ultrahigh μC* Organic Mixed Conductors
- 6 March 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (10) , 10608-10616
Cu-Catalyzed Direct Arylation Polycondensation Achieving Ultrahigh μC* Organic Mixed Conductors
- 27 June 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (27) , 24162-24170
Welding 2D Semiconducting Crystals by Covalent Stitching of Grain Boundaries in WS2
The advent of transition metal dichalcogenides (TMDCs) has revolutionized the field of optoelectronics. In this context, recent advances in the large-area synthesis of monolayer WS2 opened the door to potential optoelectronic applications because of its inherently high photoluminescence (PL) yield and superior electron mobility. However, randomly distributed point and line defects are key bottlenecks for efficient charge transport, hindering further development of system-on-chip (SoC) technologies. Herein, we report a molecular welding strategy using benzene-1,4-dithiol (BDT) to simultaneously passivate sulfur vacancies and bridge grain boundary (GB) fissures in monolayer WS2. The GB welding was monitored on the atomic scale by high-angle annular dark-field scanning transmission electron microscopy. This treatment yields uniform PL emission, ∼200-fold enhancement in electron mobility, and a three-order-of-magnitude increase in both on-state current and Ion/Ioff ratio for transistors across GBs, comparable to intragrain characteristics. Additionally, temperature-dependent PL spectroscopy was employed to identify the defect types and the activation energy of GBs. Our approach, utilizing the facile vapor deposition of ad-hoc molecules to repair line defects in 2D crystals, offers a scalable and effective solution to repair extended line defects in two-dimensional (2D) semiconductors, advancing the development of high-performance, uniform 2D optoelectronic systems.
- 27 June 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (27) , 24162-24170
Welding 2D Semiconducting Crystals by Covalent Stitching of Grain Boundaries in WS2
The advent of transition metal dichalcogenides (TMDCs) has revolutionized the field of optoelectronics. In this context, recent advances in the large-area synthesis of monolayer WS2 opened the door to potential optoelectronic applications because of its inherently high photoluminescence (PL) yield and superior electron mobility. However, randomly distributed point and line defects are key bottlenecks for efficient charge transport, hindering further development of system-on-chip (SoC) technologies. Herein, we report a molecular welding strategy using benzene-1,4-dithiol (BDT) to simultaneously passivate sulfur vacancies and bridge grain boundary (GB) fissures in monolayer WS2. The GB welding was monitored on the atomic scale by high-angle annular dark-field scanning transmission electron microscopy. This treatment yields uniform PL emission, ∼200-fold enhancement in electron mobility, and a three-order-of-magnitude increase in both on-state current and Ion/Ioff ratio for transistors across GBs, comparable to intragrain characteristics. Additionally, temperature-dependent PL spectroscopy was employed to identify the defect types and the activation energy of GBs. Our approach, utilizing the facile vapor deposition of ad-hoc molecules to repair line defects in 2D crystals, offers a scalable and effective solution to repair extended line defects in two-dimensional (2D) semiconductors, advancing the development of high-performance, uniform 2D optoelectronic systems.
- Open Access
- 23 March 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-9
A detachable interface for stable low-voltage stretchable transistor arrays and high-resolution X-ray imaging
Challenges associated with stretchable optoelectronic devices, such as pixel size, power consumption and stability, severely brock their realization in high-resolution digital imaging. Herein, we develop a universal detachable interface technique that allows uniform, damage-free and reproducible integration of micropatterned stretchable electrodes for pixel-dense intrinsically stretchable organic transistor arrays. Benefiting from the ideal heterocontact and short channel length (2 μm) in our transistors, switching current ratio exceeding 106, device density of 41,000 transistors/cm2, operational voltage down to 5 V and excellent stability are simultaneously achieved. The resultant stretchable transistor-based image sensors exhibit ultrasensitive X-ray detection and high-resolution imaging capability. A megapixel image is demonstrated, which is unprecedented for stretchable direct-conversion X-ray detectors. These results forge a bright future for the stretchable photonic integration toward next-generation visualization equipment.
- 23 March 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-9
Open AccessA detachable interface for stable low-voltage stretchable transistor arrays and high-resolution X-ray imaging
Challenges associated with stretchable optoelectronic devices, such as pixel size, power consumption and stability, severely brock their realization in high-resolution digital imaging. Herein, we develop a universal detachable interface technique that allows uniform, damage-free and reproducible integration of micropatterned stretchable electrodes for pixel-dense intrinsically stretchable organic transistor arrays. Benefiting from the ideal heterocontact and short channel length (2 μm) in our transistors, switching current ratio exceeding 106, device density of 41,000 transistors/cm2, operational voltage down to 5 V and excellent stability are simultaneously achieved. The resultant stretchable transistor-based image sensors exhibit ultrasensitive X-ray detection and high-resolution imaging capability. A megapixel image is demonstrated, which is unprecedented for stretchable direct-conversion X-ray detectors. These results forge a bright future for the stretchable photonic integration toward next-generation visualization equipment.
- Open Access
- 16 March 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-10
Biomimetic nanocluster photoreceptors for adaptative circular polarization vision
Nanoclusters with atomically precise structures and discrete energy levels are considered as nanoscale semiconductors for artificial intelligence. However, nanocluster electronic engineering and optoelectronic behavior have remained obscure and unexplored. Hence, we create nanocluster photoreceptors inspired by mantis shrimp visual systems to satisfy the needs of compact but multi-task vision hardware and explore the photo-induced electronic transport. Wafer-scale arrayed photoreceptors are constructed by a nanocluster-conjugated molecule heterostructure. Nanoclusters perform as an in-sensor charge reservoir to tune the conductance levels of artificial photoreceptors by a light valve mechanism. A ligand-assisted charge transfer process takes place at nanocluster interface and it features an integration of spectral-dependent visual adaptation and circular polarization recognition. This approach is further employed for developing concisely structured, multi-task, and compact artificial visual systems and provides valuable guidelines for nanocluster neuromorphic devices.
- 16 March 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-10
Open AccessBiomimetic nanocluster photoreceptors for adaptative circular polarization vision
Nanoclusters with atomically precise structures and discrete energy levels are considered as nanoscale semiconductors for artificial intelligence. However, nanocluster electronic engineering and optoelectronic behavior have remained obscure and unexplored. Hence, we create nanocluster photoreceptors inspired by mantis shrimp visual systems to satisfy the needs of compact but multi-task vision hardware and explore the photo-induced electronic transport. Wafer-scale arrayed photoreceptors are constructed by a nanocluster-conjugated molecule heterostructure. Nanoclusters perform as an in-sensor charge reservoir to tune the conductance levels of artificial photoreceptors by a light valve mechanism. A ligand-assisted charge transfer process takes place at nanocluster interface and it features an integration of spectral-dependent visual adaptation and circular polarization recognition. This approach is further employed for developing concisely structured, multi-task, and compact artificial visual systems and provides valuable guidelines for nanocluster neuromorphic devices.
- Open Access
- 16 September 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8 (37) , eabq4824
Nanofloating gate modulated synaptic organic light-emitting transistors for reconfigurable displays
The use of postsynaptic current to drive long-lasting luminescence holds a disruptive potential for harnessing the next-generation of smart displays. Multiresponsive long afterglow emission can be achieved by integrating light-emitting polymers in electric spiked transistors trigged by distinct presynaptic signals inputs. Here, we report a highly effective electric spiked long afterglow organic light-emitting transistor (LAOLET), whose operation relies on a nanofloating gate architecture. Long afterglow emission with reconfigurable brightness and retention time is observed upon applying specific positive gate voltage spiked. Conversely, when negative gate voltage stimulus is applied, these LAOLETs function as click-on display. Interestingly, upon endowing the device with force sensing capabilities, it can operate as a long afterglow pressure sensor that emits long-lasting green light subsequently to a controlled extrusion action.
- 16 September 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8 (37) , eabq4824
Open AccessNanofloating gate modulated synaptic organic light-emitting transistors for reconfigurable displays
The use of postsynaptic current to drive long-lasting luminescence holds a disruptive potential for harnessing the next-generation of smart displays. Multiresponsive long afterglow emission can be achieved by integrating light-emitting polymers in electric spiked transistors trigged by distinct presynaptic signals inputs. Here, we report a highly effective electric spiked long afterglow organic light-emitting transistor (LAOLET), whose operation relies on a nanofloating gate architecture. Long afterglow emission with reconfigurable brightness and retention time is observed upon applying specific positive gate voltage spiked. Conversely, when negative gate voltage stimulus is applied, these LAOLETs function as click-on display. Interestingly, upon endowing the device with force sensing capabilities, it can operate as a long afterglow pressure sensor that emits long-lasting green light subsequently to a controlled extrusion action.