Bingquan Xie
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bingquan Xie has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Fuping Zeng
State Key Laboratory of Power Grid Environmental Protection, School of Electrical Engineering and Automation, Wuhan University, Wuhan 430072, China
6 shared publications Qiang Yao
State Grid Chongqing Electric Power Research Institute, Chongqing, China
4 shared publications- Dazhi Su
Wuhan University
3 shared publications Ju Tang
School of Electrical Engineering and Automation, Wuhan University, Wuhan, China
3 shared publications- Ju Tang
School of Electrical Engineering and Automation, Wuhan University, Wuhan 430072, China
3 shared publications Long Li
State Grid Chongqing Electric Power Research Institute, Chongqing, China
3 shared publications
Latest Publications
- 18 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 31 (3) , 1359-1366
Dielectric Properties and Microstructure of Silicone Gel at Different Thermal Aging Stages
The chip junction temperature of high-power IGBT devices leads to the thermal aging of silicone gel inside the module, which directly affects the service life of IGBT. The microstructure and dielectric properties of silicone gel at different aging stages are the key to revealing the insulation degradation mechanism of IGBT packaging. In this paper, the crosslinking density, chemical structure, and dielectric properties of silicone gel under different aging stages were tested. Combined with molecular dynamics theory calculation, the variation characteristics of dielectric properties were studied from the microstructure of silicone gel. The results show that with the increasing aging, the side chain groups with non-polarity of silicone gel will be gradually consumed, and the Si-O-Si with higher bond energy will gradually increase and be exposed to the electric field, thus the polarization will become more significant. The crosslinking density and free volume ratio of the silicone gel increase with aging, which has effects on charge transport and group polarization. The research results provide a data basis for the packaging design of IGBT under long-term service conditions, and also provide theoretical support for further optimizing the thermal aging resistance of packaging materials.
- 18 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 31 (3) , 1359-1366
Dielectric Properties and Microstructure of Silicone Gel at Different Thermal Aging Stages
The chip junction temperature of high-power IGBT devices leads to the thermal aging of silicone gel inside the module, which directly affects the service life of IGBT. The microstructure and dielectric properties of silicone gel at different aging stages are the key to revealing the insulation degradation mechanism of IGBT packaging. In this paper, the crosslinking density, chemical structure, and dielectric properties of silicone gel under different aging stages were tested. Combined with molecular dynamics theory calculation, the variation characteristics of dielectric properties were studied from the microstructure of silicone gel. The results show that with the increasing aging, the side chain groups with non-polarity of silicone gel will be gradually consumed, and the Si-O-Si with higher bond energy will gradually increase and be exposed to the electric field, thus the polarization will become more significant. The crosslinking density and free volume ratio of the silicone gel increase with aging, which has effects on charge transport and group polarization. The research results provide a data basis for the packaging design of IGBT under long-term service conditions, and also provide theoretical support for further optimizing the thermal aging resistance of packaging materials.
- 15 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 30 (5) , 2134-2141
Experimental Research on V–t Characteristics of C5F10O/CO2 Gas Mixture Under Lighting Impulse Voltage
C 5 F 10 O has excellent insulation and environmental performance. It has the potential to replace SF 6 in low and medium voltage gas insulated equipment. For gas insulating medium, its breakdown law under the impulse voltage is an important basis for the design and calibration of equipment insulation. The current research on the insulation performance of C 5 F 10 O mixed gas under the impulse voltage is still incomplete. In this paper, the empirical formula of the V-t characteristic curve of C 5 F 10 O/CO 2 mixed gas is obtained through the lightning impulse withstand voltage test under extremely non-uniform electric field, and compared with the SF 6 under the same conditions. The results showed that the breakdown voltage of C 5 F 10 O/CO 2 and SF 6 decreases with the increase of breakdown time, and stabilizes at around U 50% with the extension of breakdown time. The breakdown point of C 5 F 10 O/CO 2 mixed gas shows a significant "peak accumulation" effect. As the pressure increases, the V-t curve will rise accordingly, the distribution of breakdown points will become more compact, and the steepness of the curve will be steeper. In addition, the increase of C 5 F 10 O content and the change of the gap distance will also shorten the discharge time delay, so that the distribution of the breakdown point is more concentrated, and the steepness of the V-t characteristic curve becomes larger. In particular, the V-t characteristic curve of C 5 F 10 O/CO 2 gas mixture appears to increase with the increases of breakdown time when the gas distance is small due to the influence of space charge layer, and this phenomenon changes when the distance increases. The results provide an important basis for the insulation design and calibration of C 5 F 10 O mixed gas insulated equipment.
- 15 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 30 (5) , 2134-2141
Experimental Research on V–t Characteristics of C5F10O/CO2 Gas Mixture Under Lighting Impulse Voltage
C 5 F 10 O has excellent insulation and environmental performance. It has the potential to replace SF 6 in low and medium voltage gas insulated equipment. For gas insulating medium, its breakdown law under the impulse voltage is an important basis for the design and calibration of equipment insulation. The current research on the insulation performance of C 5 F 10 O mixed gas under the impulse voltage is still incomplete. In this paper, the empirical formula of the V-t characteristic curve of C 5 F 10 O/CO 2 mixed gas is obtained through the lightning impulse withstand voltage test under extremely non-uniform electric field, and compared with the SF 6 under the same conditions. The results showed that the breakdown voltage of C 5 F 10 O/CO 2 and SF 6 decreases with the increase of breakdown time, and stabilizes at around U 50% with the extension of breakdown time. The breakdown point of C 5 F 10 O/CO 2 mixed gas shows a significant "peak accumulation" effect. As the pressure increases, the V-t curve will rise accordingly, the distribution of breakdown points will become more compact, and the steepness of the curve will be steeper. In addition, the increase of C 5 F 10 O content and the change of the gap distance will also shorten the discharge time delay, so that the distribution of the breakdown point is more concentrated, and the steepness of the V-t characteristic curve becomes larger. In particular, the V-t characteristic curve of C 5 F 10 O/CO 2 gas mixture appears to increase with the increases of breakdown time when the gas distance is small due to the influence of space charge layer, and this phenomenon changes when the distance increases. The results provide an important basis for the insulation design and calibration of C 5 F 10 O mixed gas insulated equipment.
- 14 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 29 (4) , 1425-1432
AC Breakdown Characteristics of C₅F₁₀O/CO₂ Gas Under Different Electrode Surface Roughness
In this work, we explored the ac breakdown characteristics of C 5 F 10 O/CO 2 mixtures under different electrode surface roughness. It was found that sulphur hexafluoride (SF 6 ) outperforms C 5 F 10 O/CO 2 mixtures in the ac breakdown experiments. The breakdown voltages of C 5 F 10 O/CO 2 and SF 6 are negatively correlated with the surface roughness, while SF 6 is more sensitive to the electrode surface roughness than C 5 F 10 O/CO 2 . To reach the dielectric strength of SF 6 , an increase in pressure or mixing ratio of C 5 F 10 O/CO 2 is needed, while the liquefaction temperature of C 5 F 10 O/CO 2 will increase simultaneously. Considering the limitation of 20% drop in dielectric strength, the maximum acceptable surface roughness of the gases is determined. The controlling requirement of electrode surface roughness ${R}_{t}$ of 30 $\mu \text{m}$ in SF 6 equipment is suitable for the design of C 5 F 10 O/CO 2 equipment.
- 14 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 29 (4) , 1425-1432
AC Breakdown Characteristics of C₅F₁₀O/CO₂ Gas Under Different Electrode Surface Roughness
In this work, we explored the ac breakdown characteristics of C 5 F 10 O/CO 2 mixtures under different electrode surface roughness. It was found that sulphur hexafluoride (SF 6 ) outperforms C 5 F 10 O/CO 2 mixtures in the ac breakdown experiments. The breakdown voltages of C 5 F 10 O/CO 2 and SF 6 are negatively correlated with the surface roughness, while SF 6 is more sensitive to the electrode surface roughness than C 5 F 10 O/CO 2 . To reach the dielectric strength of SF 6 , an increase in pressure or mixing ratio of C 5 F 10 O/CO 2 is needed, while the liquefaction temperature of C 5 F 10 O/CO 2 will increase simultaneously. Considering the limitation of 20% drop in dielectric strength, the maximum acceptable surface roughness of the gases is determined. The controlling requirement of electrode surface roughness ${R}_{t}$ of 30 $\mu \text{m}$ in SF 6 equipment is suitable for the design of C 5 F 10 O/CO 2 equipment.
- 23 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 29 (4) , 1617-1624
Switching Impulse Characteristics of C5F10O Gas Mixtures Under Extremely Nonuniform Field
$\text{C}_{{5}}\text{F}_{{10}}\text{O}$ gas mixture is one of the most promising SF 6 replacement gases with outstanding electrical performance and excellent environmental characteristics. Its switching impulse (SI) breakdown characteristics are important for future insulation design and insulation coordination. In this article, factors that can influence SI withstand voltage and the synergy of the gas mixture such as gas pressure, and the type and content of the buffer gas, are experimentally studied. According to the experimental results, $\text{C}_{{5}}\text{F}_{{10}}\text{O}$ gas mixtures under nonuniform electric field show significant polarity effects under SI voltage. When the polarity of the applied voltage is negative, its $U_{\mathrm {50\%}}$ tends to increase linearly with the increase in gas pressure, while the “hump phenomenon” is observed under positive SIs as the gas pressure increases, which can be explained by the enhanced electric field distortion by the space charge. The insulation strength of the two gas mixtures increases more obviously with the increase in $\text{C}_{{5}}\text{F}_{{10}}\text{O}$ content at lower mixing ratios and shows a saturation trend at higher mixing ratios. Based on the calculation, CO 2 in discharge processes is likely to produce more low-energy electrons than that can be produced by N 2 under the same conditions, so that SI withstand voltage of $\text{C}_{{5}}\text{F}_{{10}}\text{O}$ /CO 2 is higher than that of $\text{C}_{{5}}\text{F}_{{10}}\text{O} / \text{N}_{2}$ according to the attachment of low-energy electrons by $\text{C}_{{5}}\text{F}_{{10}}\text{O}$ . On this basis, the synergistic effects between different gas components are calculated. The synergy between the components of a gas mixture is related to the gas pressure and $\text{C}_{{5}}\text{F}_{{10}}\text{O}$ content, and the synergistic effects are more significant in $\text{C}_{{5}}\text{F}_{{10}}\text{O} / \text{N}_{{2}}$ mixture than in $\text{C}_{{5}}\text{F}_{{10}}\text{O}$ /CO 2 mixture. The results show that SI withstand voltage of $\text{C}_{{5}}\text{F}_{{10}}\text{O}$ gas mixtures under a nonuniform electric field can be improved by increasing the gas pressure or $\text{C}_{{5}}\text{F}_{{10}}\text{O}$ content. $\text{C}_{{5}}\text{F}_{{10}}\text{O}$ gas mixture has the potential to replace SF 6 in certain mixing ratio and under certain gas pressure.
- 23 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 29 (4) , 1617-1624
Switching Impulse Characteristics of C5F10O Gas Mixtures Under Extremely Nonuniform Field
$\text{C}_{{5}}\text{F}_{{10}}\text{O}$ gas mixture is one of the most promising SF 6 replacement gases with outstanding electrical performance and excellent environmental characteristics. Its switching impulse (SI) breakdown characteristics are important for future insulation design and insulation coordination. In this article, factors that can influence SI withstand voltage and the synergy of the gas mixture such as gas pressure, and the type and content of the buffer gas, are experimentally studied. According to the experimental results, $\text{C}_{{5}}\text{F}_{{10}}\text{O}$ gas mixtures under nonuniform electric field show significant polarity effects under SI voltage. When the polarity of the applied voltage is negative, its $U_{\mathrm {50\%}}$ tends to increase linearly with the increase in gas pressure, while the “hump phenomenon” is observed under positive SIs as the gas pressure increases, which can be explained by the enhanced electric field distortion by the space charge. The insulation strength of the two gas mixtures increases more obviously with the increase in $\text{C}_{{5}}\text{F}_{{10}}\text{O}$ content at lower mixing ratios and shows a saturation trend at higher mixing ratios. Based on the calculation, CO 2 in discharge processes is likely to produce more low-energy electrons than that can be produced by N 2 under the same conditions, so that SI withstand voltage of $\text{C}_{{5}}\text{F}_{{10}}\text{O}$ /CO 2 is higher than that of $\text{C}_{{5}}\text{F}_{{10}}\text{O} / \text{N}_{2}$ according to the attachment of low-energy electrons by $\text{C}_{{5}}\text{F}_{{10}}\text{O}$ . On this basis, the synergistic effects between different gas components are calculated. The synergy between the components of a gas mixture is related to the gas pressure and $\text{C}_{{5}}\text{F}_{{10}}\text{O}$ content, and the synergistic effects are more significant in $\text{C}_{{5}}\text{F}_{{10}}\text{O} / \text{N}_{{2}}$ mixture than in $\text{C}_{{5}}\text{F}_{{10}}\text{O}$ /CO 2 mixture. The results show that SI withstand voltage of $\text{C}_{{5}}\text{F}_{{10}}\text{O}$ gas mixtures under a nonuniform electric field can be improved by increasing the gas pressure or $\text{C}_{{5}}\text{F}_{{10}}\text{O}$ content. $\text{C}_{{5}}\text{F}_{{10}}\text{O}$ gas mixture has the potential to replace SF 6 in certain mixing ratio and under certain gas pressure.
- 20 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 29 (3) , 866-873
Breakdown Characteristics of Eco-Friendly Gas C5F10O/CO2 Under Switching Impulse in Nonuniform Electric Field
In this article, an experimental study was carried out on the switching impulse (SI) breakdown characteristics of C 5 F 10 O/CO 2 mixture, and the effects of pressure and mixing ratio on its breakdown characteristics were analyzed. The results show that there is a polarity effect between positive and negative breakdown voltages, and the polarity effect becomes stronger with the pressure increased, and a polarity reversal occurred at 0.15 MPa. Increasing the gas pressure and the content of C 5 F 10 O can improve the SI breakdown voltage of C 5 F 10 O/CO 2 , but it can only reach 60%–70% of SF 6 under the same conditions. The positive breakdown voltage has a “hump” phenomenon as the pressure increases. With the increase in C 5 F 10 O content, the “hump” tends to shift toward low pressure. The “hump” is explained from the improving effect of positive space charge on electric field, and the influence of the applied voltage, pressure, and C 5 F 10 O content on the positive charge layer is comprehensively considered. The results of this article can provide reference for the engineering application of C 5 F 10 O gas insulating medium.
- 20 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 29 (3) , 866-873
Breakdown Characteristics of Eco-Friendly Gas C5F10O/CO2 Under Switching Impulse in Nonuniform Electric Field
In this article, an experimental study was carried out on the switching impulse (SI) breakdown characteristics of C 5 F 10 O/CO 2 mixture, and the effects of pressure and mixing ratio on its breakdown characteristics were analyzed. The results show that there is a polarity effect between positive and negative breakdown voltages, and the polarity effect becomes stronger with the pressure increased, and a polarity reversal occurred at 0.15 MPa. Increasing the gas pressure and the content of C 5 F 10 O can improve the SI breakdown voltage of C 5 F 10 O/CO 2 , but it can only reach 60%–70% of SF 6 under the same conditions. The positive breakdown voltage has a “hump” phenomenon as the pressure increases. With the increase in C 5 F 10 O content, the “hump” tends to shift toward low pressure. The “hump” is explained from the improving effect of positive space charge on electric field, and the influence of the applied voltage, pressure, and C 5 F 10 O content on the positive charge layer is comprehensively considered. The results of this article can provide reference for the engineering application of C 5 F 10 O gas insulating medium.
- 31 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 29 (1) , 162-169
Impulse Breakdown Characteristics of Eco-Friendly Gas C₅F₁₀O/N₂ in Nonhomogeneous Field
In this article, the breakdown characteristics of C 5 F 10 O/N 2 mixture in a nonhomogeneous field under switching impulse (SI) and lightning impulse (LI) are experimentally studied. The influence of pressure, mixing ratio, voltage waveforms, electric field distribution, and voltage polarity on the breakdown characteristics of C 5 F 10 O/N 2 is analyzed. The results show that: in nonhomogeneous field, the positive breakdown voltage of C 5 F 10 O/N 2 mixture appears a “hump” as the pressure increases, and the “hump” of switching breakdown voltage is more obvious. Sulfur-hexafluoride (SF 6 ) outperforms in the breakdown tests, increasing the pressure and the mixing ratio can effectively improve the negative breakdown voltage of C 5 F 10 O/N 2 mixture. The breakdown voltages of C 5 F 10 O/N 2 mixture change little as the wave tail time changes, while it drops heavily as the electric field nonuniform coefficient increases. The breakdown voltages of C 5 F 10 O/N 2 mixture have obvious polarity effect which becomes stronger as the pressure increases.
- 31 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 29 (1) , 162-169
Impulse Breakdown Characteristics of Eco-Friendly Gas C₅F₁₀O/N₂ in Nonhomogeneous Field
In this article, the breakdown characteristics of C 5 F 10 O/N 2 mixture in a nonhomogeneous field under switching impulse (SI) and lightning impulse (LI) are experimentally studied. The influence of pressure, mixing ratio, voltage waveforms, electric field distribution, and voltage polarity on the breakdown characteristics of C 5 F 10 O/N 2 is analyzed. The results show that: in nonhomogeneous field, the positive breakdown voltage of C 5 F 10 O/N 2 mixture appears a “hump” as the pressure increases, and the “hump” of switching breakdown voltage is more obvious. Sulfur-hexafluoride (SF 6 ) outperforms in the breakdown tests, increasing the pressure and the mixing ratio can effectively improve the negative breakdown voltage of C 5 F 10 O/N 2 mixture. The breakdown voltages of C 5 F 10 O/N 2 mixture change little as the wave tail time changes, while it drops heavily as the electric field nonuniform coefficient increases. The breakdown voltages of C 5 F 10 O/N 2 mixture have obvious polarity effect which becomes stronger as the pressure increases.