HIHoda Saleh Ismail

Hoda Saleh Ismail

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hoda Saleh Ismail has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Influence of Cavity Design, Bonding‐Banding Sequence, and Thermomechanical Loading on the Marginal Adaptation of Class II Resin Composite Restorations

    by Hoda Saleh Ismail, Ashraf Ibrahim Ali, Hanan Ahmed Nabil Soliman

    Objective: To evaluate whether differences exist in marginal adaptation among beveled and non‐beveled cavity designs, different bonding‐banding sequences, and before and after thermomechanical loading. Methods: Forty molars received occluso‐mesial preparations and were assigned to two groups: box‐shaped cavities ( n = 20) and cavities with buccal and palatal bevels ( n = 20). Each group was subdivided based on whether adhesive was applied before or after matrix band placement. Restorations were replicated in epoxy, and marginal adaptation at proximal buccal, palatal, and gingival interfaces was examined by scanning electron microscopy (SEM) at ×200 magnification, using percentage of continuous margin (%CM) and by World Dental Federation (FDI) criteria after 24 h and after thermomechanical loading. Results: Cavity design did not significantly influence marginal adaptation. Bonding before banding improved immediate %CM at buccal‐palatal margins. Thermomechanical loading significantly reduced %CM in all groups, while none of the tested variables influenced FDI scores. Conclusions: Proximal beveling had no effect on adaptation. Bonding before banding enhanced immediate %CM values, with no significant effect after aging. Aging reduced %CM across all margins. SEM was more sensitive than FDI criteria in detecting marginal discrepancies. Clinical Significance: Bonding before banding may improve immediate margins, though aging compromises adaptation.

  • Open Access

    A two-year randomized clinical trial of bulk-fill and ion-releasing composites with universal adhesives in class V carious lesions

    by Hoda Saleh Ismail, Hanan Ahmed Nabil Soliman, Ashraf Ibrahim Ali, Ahmed Gamal Raghip, Eman H. Albelasy

    Objectives: To evaluate the two-year clinical performance of Class V restorations in carious cervical lesions placed with bulk-fill resin composite or ion-releasing composite, combined with either fluoride-free or fluoride-releasing universal adhesives. Materials and methods: In this double-blind, randomized clinical trial, 140 Class V restorations were placed using four restorative systems: bulk-fill composite with fluoride-free adhesive, bulk-fill composite with fluoride-releasing adhesive, ion-releasing composite with fluoride-free adhesive, and ion-releasing composite with fluoride-releasing adhesive. Restorations were placed under rubber-dam isolation using selective enamel etching. Clinical evaluations were performed at baseline, 6 months, one year, and two years using periodontal indices and FDI criteria. Data were analyzed using Kruskal–Wallis, Friedman, Mann–Whitney U, and Wilcoxon signed-rank tests (α = 0.05). Results: Recall rates were 96.4% at 6 months, 89.3% at 1 year, and 83.5% at 2 years. Periodontal parameters showed no significant differences among groups. No significant differences were observed between restorative systems for any FDI functional, biological, or esthetic criteria at any evaluation point. All restorations remained clinically acceptable, with no loss of retention, fractures, or secondary caries throughout the two-year follow-up. Marginal adaptation scores remained stable and comparable among all groups. Conclusions: All four restorative systems demonstrated comparable and favorable clinical performance over two years. The use of fluoride-releasing adhesives or ion-releasing composites did not confer additional clinical benefits under the conditions of this trial. Clinical relevance: Both the tested bulk-fill resin composite and ion-releasing composite deliver predictable short-term performance in Class V restorations, without additional benefit from fluoride-releasing components.

  • Open Access

    Effect of erosive solutions and thermal cycling on the surface properties of universal injectable and regular consistency resin composites

    by Ahmed Abbas Rhaif, Hoda Saleh Ismail, Tawakol Ahmed Ahmed Enab, Nadia Mohamed Zaghloul

    Background: Injectable resin composites, such as G-aenial Universal and Bulk Injectable, offer high flowability and easy application for minimally invasive repair of eroded or chipped teeth. However, limited in vitro data exist regarding their resistance to erosive and thermal aging under neutral and acidic oral conditions. Materials and methods: Disc-shaped specimens (10 mm × 2 mm) were prepared from two injectable composites—G-aenial Universal Injectable and G-aenial Bulk Injectable—and two conventional composites—3 M Filtek Z350 XT Universal Restorative and 3 M Filtek One Bulkfill. Seventy-two discs per material were subdivided into three aging protocols ( n = 24 each): (1) deionized water immersion (pH 7), (2) HCl immersion (pH 1.2) followed by thermal cycling, or (3) citric acid immersion (pH 3) followed by thermal cycling. Each subgroup was tested for surface roughness, Vickers microhardness, and two-body wear resistance ( n = 8). Surface roughness was measured via contact profilometry; selected specimens underwent atomic force microscope (AFM) and scanning electron microscope (SEM) imaging. Microhardness was assessed using a digital Vickers tester, and wear resistance was simulated with a programmable wear device measuring weight and volume loss. Two-way ANOVA, post-hoc, and Pearson’s correlation analyses were performed ( p < 0.05). Results: Erosive and thermal aging led to significant increases in surface roughness and reductions in microhardness across most materials, with no significant change in two-body wear resistance. Under the HCl + thermal cycling condition, G-aenial Bulk Injectable demonstrated the highest roughness and lowest hardness, whereas Filtek Z350 XT Universal showed the lowest roughness and highest hardness. Following citric acid exposure, no significant differences in roughness or hardness were identified, although G-aenial Bulk Injectable incurred the greatest weight loss. Conclusions: According to this in vitro study, G-aenial Universal Injectable is best suited for neutral pH oral conditions, while Filtek Z350 XT Universal provides superior performance under acidic challenge. Incremental composites generally preserve surface quality better than bulk-fill materials. The more severe degradation resulting from gastric-level acid compared to citric acid illustrates the value of selecting restorative composites based on anticipated oral environmental exposures.


  • Open Access

    Elemental and micromorphological analysis of ion releasing restoration/carious dentin interface

    by Alaa Esmat Abdelsalam, Hoda Saleh Ismail, Hamdi Hosni Hamama

    The objective of the current study was to evaluate elemental analysis and micromorphological patterns at the interfaces between tooth substrates either sound or demineralized dentin and ion-releasing restorations, including conventional glass ionomer and ion-releasing composite. The evaluation was conducted immediately (after 24 h) and after six months of artificial saliva storage. A total of 48 sound human premolars were used in this study. The premolars were randomly divided into two groups based on substrate type: sound and demineralized dentin (n = 24). Each substrate group was further subdivided into two subgroups according to restoration type: a conventional glass ionomer (Equia Forte HT) and an ion-releasing composite (ACTIVA-Bioactive Restorative) (n = 12). Each restoration subgroup was further divided according to aging condition: whether tested immediately after 24 h or after storage for six months in artificial saliva (n = 6). Specimens were sectioned buccolingually and longitudinally into two halves. For elemental analysis, one-half of each sectioned specimen was investigated using energy dispersive X-ray spectroscopy (EDX). Four elements (Ca, P, Al, and Si) were specifically examined at three different sites: dentin, hybrid layer, and restoration. For micromorphological patterns, two representative specimens from the second half of sectioned teeth were randomly selected to be observed under scanning electron microscope (SEM). EDX data were tabulated and subjected to statistical analysis, with a significance level set at p < 0.05. Kruskal-Wallis test revealed no statistically significant differences in distribution of the four elements across different tooth substrates or aging times. However, significant differences were observed based on the site factor. SEM micrographs revealed an ion-exchange zone in aged Equia Forte specimens and crystal-like structure deposition in artificially carious dentin bonded to ACTIVA. It has been concluded that both conventional glass ionomer restorative material and ion-releasing composite highlighted their bioactive behavior by demonstrating their potential ability to remineralize the demineralized dentin, reinforcing their promise as effective restorative options for dentin remineralization.


  • Open Access

    Effect of surface treatment on glass ionomers in sandwich restorations: a systematic review and meta-analysis of laboratory studies

    by Hoda S. Ismail, Ashraf Ibrahim Ali, Franklin Garcia-Godoy

    Objectives: This study aimed to evaluate the effect of different surface treatments on the bond strength between new or aged glass ionomers (GI) and resin composites in sandwich restorations.Methods: A comprehensive search was conducted in three databases to identify studies focusing on the bond strength of new or aged GIs and resin composites in laboratory settings. The selected studies were assessed for potential biases based on predetermined criteria. Additionally, a meta-analysis was performed using three studies.Results: A total of 29 studies were included, with 24 investigating the bond strength of new GIs and five focusing on GI repair. Three studies were included in the meta-analysis (with a 95% confidence interval) which revealed no significant difference in the mean MPa values of resin-modified glass ionomer (RMGI) treated with phosphoric acid or Er,Cr:YSGG laser before the application of an etch-and-rinse adhesive. Surface treatment was found to be crucial for achieving optimal bonding between GI and resin composite, regardless of the GI’s condition.Conclusions: The combination of mechanical and chemical surface treatments does not significantly affect the bond strength between new RMGI and composite. However, for GI repair, it is recommended to use both treatments to enhance the bond strength.


  • Open Access

    Evaluation methods of artificial demineralization protocols for coronal dentin: a systematic review of laboratory studies

    by Alaa Esmat Abdel Salam, Hoda Saleh Ismail, Hamdi Hamama

    Background: Despite the widespread use of various laboratory models such as chemical, bacterial, or combination as demineralization protocols to induce artificial caries in dentin, there is lack in the literature regarding a comparison of their effectiveness and assessment of dentin mineral density through using several analytical techniques, including microscopic and spectroscopic ones. The purpose of this review was to determine the appropriate demineralization protocols for inducing artificial caries utilizing coronal dentin. Furthermore, this evidence-based study was conducted to identify the most reliable evaluation methods in assessing the efficiency of the reviewed protocols. Materials and methods: An electronic search was conducted on three databases: MEDLINE/PubMed, Scopus, and ScienceDirect, following PRISMA guidelines. Only the studies published between 2019 and 2024 were considered. All studies were assessed based on predefined eligibility criteria. English laboratory studies that employed chemical models for induction of artificial caries on human mid-coronal dentin were included. The selected studies were individually reviewed for potential bias according to predetermined criteria. Results: A total of 23 studies met the inclusion and exclusion criteria of this systematic review. From the included studies, 11 studies utilized pH-cycling model, 10 studies reported using simple demineralization model, while only one study reported an undetailed protocol. Moreover, combined ‘chemical and biological’ protocol for dentin demineralization was reported in two studies. According to the outcome of included studies, dentin mineral density, depth of lesions, crystalline structure, surface morphology, and surface microhardness were evaluated using a variety of laboratory methods offering, either qualitative, quantitative, or semi-quantitative analysis. The conclusions of the studies revealed confirmatory results regarding the use of multiple devices. Conclusions: The pH-cycling model was found to be the most common type of chemical model used to induce dentin demineralization for 14 days immersion time, followed by a simple demineralization model through using an acetic acid solution. There was no single evaluation approach found to provide comprehensive information about the mineral content independently. Therefore, a combination of multiple techniques is recommended to yield sufficient and more accurate data.


  • Open Access

    Short dentin etching with universal adhesives: effect on bond strength and gingival margin adaptation

    by Hoda Saleh Ismail, Hanan Ahmed Nabil Soliman

    Background: Short dentin etching, a relatively recent technique, aims to improve resin-dentin bonding by preserving hydroxyapatite crystals within the collagen spaces. This study explores short dentin etching’s potential in mitigating over-etching issues in deep proximal dentin/cementum margins, an aspect not previously investigated. This study evaluates the microtensile bond strength (μTBS) and marginal adaptation of two universal adhesives using different etch-and-rinse strategies (15-second and 3-second etching) and self-etch strategies, both immediate and post-thermal cycling and mechanical loading. Methods: Eighty-four molars underwent μTBS testing, categorized by the universal adhesive type (Tetric Uni and Prime&Bond Uni) (n = 42) and adhesive strategy (n = 14) with half tested after 24 h and the rest post aging. Forty-two molars received occluso-mesial preparations with proximal margins in dentin/cementum and were restored accordingly. Scanning electron microscope (SEM) examination of epoxy replicas for the restoration/gingival dentin interfaces was conducted after 24 h and aging. Dentin etching patterns were assessed using SEM. A three-way ANOVA evaluated μTBS data, while a two-way ANOVA and paired sample t-test analyzed marginal adaptation data (significance level is α = 0.05). Results: Adhesive type, strategy, and aging significantly influenced μTBS. After aging, Tetric Uni subgroups displayed higher bond strength compared to Prime&Bond Uni subgroups. Marginal adaptation was unaffected by adhesive type or strategy, although aging reduced bond strength and adaptation for both adhesives. Conclusions: The etch-and-rinse protocol yielded higher μTBS results for the HEMA-free isopropanol-based adhesive (Prime&Bond Uni). Marginal integrity was similar for both adhesives. The 3-second and 15-second etching times produced consistent results in all tests and for both adhesives. Clinical significance: The adhesive protocol for bonding universal adhesives to dentin is contingent on the adhesive composition.


  • Open Access

    Influence of curing mode and aging on the bonding performance of universal adhesives in coronal and root dentin

    by Hoda Saleh Ismail, Ashraf Ibrahim Ali, Mohamed Elshirbeny Elawsya

    Background: This study aims to evaluate the microtensile bond strength (µTBS) of different resin composite restorations bonded to mid-coronal dentin and proximal root dentin using light-cured, chemical-cured, and dual-cured adhesives immediately and after aging. Nanoleakage and degree of cure were also assessed. Methods: Eighty-four molars were divided into mid-coronal dentin and proximal root dentin. Each group was further subdivided into three subgroups based on the restorative systems used, which involved the utilization of light-cured, chemical-cured, and dual-cured adhesives. Half of the specimens underwent µTBS testing after 24 h, while the other half after aging. Representative specimens were analyzed for nanoleakage. The degree of cure of the tested adhesive systems was also assessed. Results: Aging showed a significant negative effect on µTBS results and led to increased nanoleakage (p < 0.001). Furthermore, in all subgroups, the µTBS values of proximal root dentin were lower compared to mid-coronal dentin, except in the aged subgroup for the system utilizing the dual-cured adhesive. The restorative systems with chemical and dual-cured adhesives demonstrated comparable bonding properties. However, the system with the light-cured adhesive exhibited the worst bonding properties after aging when bonded to proximal root dentin and cured at a large distance (p < 0.05). Conclusions: All tested restorative systems were negatively affected by aging, and the regional dentin had variable effects on the bonding properties. Clinicians should exercise caution when using the tested light-cured adhesive in areas where the curing distance exceeds 3 mm.


    • 1 April 2024
      • Vol. 37  (2) , 91-100

    Effect of light-, chemical-, and dual-cured universal adhesives on the internal adaptation of resin composites to pulpal and gingival internal walls

    by Hoda Saleh Ismail, Mohamed Elshirbeny Elawsya, Ashraf Ibraiiim Ali

    Purpose: To compare the internal adaptation of restorative systems bonded to mid-coronal and gingival dentin using light-cured, chemical-cured, and dual-cured adhesives, both immediately and after aging. Methods: 60 molars were selected and received occluso-mesial preparations with dentin gingival margins. Restorations were performed using different restorative systems with light-cured, chemical-cured, and dual-cured adhesives. Internal adaptation was assessed by examining the percentage of continuous margin (%CM) at the pulpal and gingival dentin under a scanning electron microscope at x200 magnification. Half of the teeth were stored in sterile water for 24 hours, while the other half underwent 10,000 thermal cycles. Micro-morphological analysis was conducted on representative samples at x1,000 magnification. Results: The restorative system with light-cured adhesive exhibited significantly lower %CM values at the gingival dentin, particularly after aging. Aging had a negative impact on the %CM values of the pulpal and gingival dentin in restorative systems with light-cured and dual-cured adhesives. Regional dentin variations influenced the %CM values, especially after aging, regardless of the restorative system used. The tested restorative system with chemical-cured adhesive is preferable for achieving improved internal adaptation when bonding to both mid-coronal and gingival dentin, compared to the other tested systems.


  • Open Access

    Effect of different storage media on elemental analysis and microhardness of cervical cavity margins restored with a bioactive material

    by Hoda Saleh Ismail, Brian Ray Morrow, Ashraf Ibrahim Ali, Rabab Elsayed Elaraby Mehesen, Salah Hasab Mahmoud, Franklin Garcia-Godoy

    Ismail HS, et al. Restor Dent Endod. 2024 Jan;49:e6. https://doi.org/10.5395/rde.2024.49.e6