Ranon Fuller
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ranon Fuller has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Devin Rappleye
Brigham Young University
8 shared publications - Cameron Vann
Brigham Young University
2 shared publications Tyler Williams
Brigham Young University
2 shared publications- Carlos Mejia
Brigham Young University
1 shared publication Devin Rappleye
1 shared publication- Edward Mercado
Department of Chemical Engineering, Brigham Young University, Provo, Utah 84602, United States of America
1 shared publication
Latest Publications
- Open Access
- 1 June 2026
- Published by The Electrochemical Society in ECS Advances
- Vol. 5 (2) , 022504
Development of A Hydrodynamic Correlation for Rotating Rod Electrodes in Molten Chloride Salts: Part II. Rotational Experiments
In this work, we present a hydrodynamic correlation for uninsulated, high length-to-diameter ( L / d ) ratio (in the range of 4.8–13.7) RREs in molten chloride salts. To regress this correlation, we measured mass transfer-limited currents for SmCl 3 and CrCl 2 in LiCl–KCl eutectic, as well as SmCl 3 in NaCl–KCl eutectic, across a range of diameters, temperatures, concentrations, and rotational speeds. Fitting this data yielded the relationship Sh = 0.209 R e 0.682 S c 0.266 , where Sh , Re , and Sc are the Sherwood, Reynolds, and Schmidt numbers respectively. We compared this model to established literature models including the Selman correlation for aqueous RREs with L / d ratios of 1–2 in aqueous solutions, the Eisenberg correlation for hydrodynamically smooth rotating cylinder electrodes in aqueous solutions, the Rappleye correlation for laminar RREs in molten salts, and the Prokop model for RRE-disks in aqueous solutions. In this comparison, we found our model to agree closest with the Selman correlation. Our correlation provides a practical foundation for predicting mass transfer to RREs in molten salts and enables laboratory-scale emulation of flowing molten-salt environments for sensors, corrosion studies, and electrochemical process development.
- 1 June 2026
- Published by The Electrochemical Society in ECS Advances
- Vol. 5 (2) , 022504
Open AccessDevelopment of A Hydrodynamic Correlation for Rotating Rod Electrodes in Molten Chloride Salts: Part II. Rotational Experiments
In this work, we present a hydrodynamic correlation for uninsulated, high length-to-diameter ( L / d ) ratio (in the range of 4.8–13.7) RREs in molten chloride salts. To regress this correlation, we measured mass transfer-limited currents for SmCl 3 and CrCl 2 in LiCl–KCl eutectic, as well as SmCl 3 in NaCl–KCl eutectic, across a range of diameters, temperatures, concentrations, and rotational speeds. Fitting this data yielded the relationship Sh = 0.209 R e 0.682 S c 0.266 , where Sh , Re , and Sc are the Sherwood, Reynolds, and Schmidt numbers respectively. We compared this model to established literature models including the Selman correlation for aqueous RREs with L / d ratios of 1–2 in aqueous solutions, the Eisenberg correlation for hydrodynamically smooth rotating cylinder electrodes in aqueous solutions, the Rappleye correlation for laminar RREs in molten salts, and the Prokop model for RRE-disks in aqueous solutions. In this comparison, we found our model to agree closest with the Selman correlation. Our correlation provides a practical foundation for predicting mass transfer to RREs in molten salts and enables laboratory-scale emulation of flowing molten-salt environments for sensors, corrosion studies, and electrochemical process development.
- Open Access
- 1 June 2026
- Published by The Electrochemical Society in ECS Advances
- Vol. 5 (2) , 022503
Development of A Hydrodynamic Correlation for Rotating Rod Electrodes in Molten Chloride Salts: I. Property Measurements
Rotating electrodes have several advantages over static electrodes in molten salts such as their ability to replicate in situ hydrodynamic conditions, dwarf the effect of natural convection and temperature gradients, and measure electrochemical kinetics at high rotational rates. Regressing accurate hydrodynamic correlations for rotating electrodes in molten salts requires precise knowledge of certain system properties such as analyte concentrations, diffusion coefficients, electrode areas, and viscosities. In this work, we present our methods and data analysis to determine these properties for SmCl 3 in LiCl-KCl at 722 K, CrCl 2 in LiCl-KCl at 784 K, and SmCl 3 at 981 K to complete the regression of our hydrodynamic correlation for rotating rod electrodes (RREs) in Part II of this work. Specifically, we determined analyte concentrations using inductively coupled plasma mass spectrometry (ICP-MS), oxygen contamination using back titration, electrochemical solution resistance using electrochemical impedance spectroscopy (EIS), electrode areas using cyclic voltammetry (CV), diffusion coefficients using CV, chronopotentiometry (CP), and chronoamperometry (CA), and the viscosity of LiCl-KCl eutectic using a regression of literature data. This analysis resulted in accepted diffusion coefficients of 5.50 × 10 −6 cm 2 -s −1 for SmCl 3 in LiCl-KCl, 1.44 × 10 −5 cm 2 -s −1 for CrCl 2 in LiCl-KCl, and 2.98 × 10 −5 Cm 2 -s −1 for SmCl 3 in NaCl-KCl.
- 1 June 2026
- Published by The Electrochemical Society in ECS Advances
- Vol. 5 (2) , 022503
Open AccessDevelopment of A Hydrodynamic Correlation for Rotating Rod Electrodes in Molten Chloride Salts: I. Property Measurements
Rotating electrodes have several advantages over static electrodes in molten salts such as their ability to replicate in situ hydrodynamic conditions, dwarf the effect of natural convection and temperature gradients, and measure electrochemical kinetics at high rotational rates. Regressing accurate hydrodynamic correlations for rotating electrodes in molten salts requires precise knowledge of certain system properties such as analyte concentrations, diffusion coefficients, electrode areas, and viscosities. In this work, we present our methods and data analysis to determine these properties for SmCl 3 in LiCl-KCl at 722 K, CrCl 2 in LiCl-KCl at 784 K, and SmCl 3 at 981 K to complete the regression of our hydrodynamic correlation for rotating rod electrodes (RREs) in Part II of this work. Specifically, we determined analyte concentrations using inductively coupled plasma mass spectrometry (ICP-MS), oxygen contamination using back titration, electrochemical solution resistance using electrochemical impedance spectroscopy (EIS), electrode areas using cyclic voltammetry (CV), diffusion coefficients using CV, chronopotentiometry (CP), and chronoamperometry (CA), and the viscosity of LiCl-KCl eutectic using a regression of literature data. This analysis resulted in accepted diffusion coefficients of 5.50 × 10 −6 cm 2 -s −1 for SmCl 3 in LiCl-KCl, 1.44 × 10 −5 cm 2 -s −1 for CrCl 2 in LiCl-KCl, and 2.98 × 10 −5 Cm 2 -s −1 for SmCl 3 in NaCl-KCl.
- 9 October 2025
- Published by American Chemical Society (ACS) in ACS Electrochemistry
- Vol. 1 (11) , 2402-2414
Using Serial Open Circuit Potentiometry to Study Ce and Gd Deposition in Molten LiCl-KCl Eutectic
- 9 October 2025
- Published by American Chemical Society (ACS) in ACS Electrochemistry
- Vol. 1 (11) , 2402-2414
Using Serial Open Circuit Potentiometry to Study Ce and Gd Deposition in Molten LiCl-KCl Eutectic
- 1 April 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (4) , 043510
Methods for Rotating Electrodes in High-Temperature Molten Salts
In this paper, we describe and validate a custom apparatus for performing high-speed (250–3,500 rpm) rotating electrode and dilatometer density experiments in molten salts. The reported details can aid in decreasing the difficulty and increasing the quality of such experiments. We discuss the design challenges and the solutions identified. We investigate methods for accurately measuring the solution resistance using electrochemical impedance spectroscopy, calculating the working electrode area using cyclic voltammetry, and measuring the mass transfer-limited current of rotating electrodes using a series of chronoamperometry pulses. We further demonstrate the efficacy of our methods in producing accurate results.
- 1 April 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (4) , 043510
Methods for Rotating Electrodes in High-Temperature Molten Salts
In this paper, we describe and validate a custom apparatus for performing high-speed (250–3,500 rpm) rotating electrode and dilatometer density experiments in molten salts. The reported details can aid in decreasing the difficulty and increasing the quality of such experiments. We discuss the design challenges and the solutions identified. We investigate methods for accurately measuring the solution resistance using electrochemical impedance spectroscopy, calculating the working electrode area using cyclic voltammetry, and measuring the mass transfer-limited current of rotating electrodes using a series of chronoamperometry pulses. We further demonstrate the efficacy of our methods in producing accurate results.
- Open Access
- 1 May 2024
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 171 (5) , 053508
Communication—The Development of a Stable and Practical Saturated Reference Electrode for Molten Chloride Salt Systems
A simply constructed, stable, Ni/Ni2+ saturated reference electrode (SRE) has potential to measure thermodynamic behavior of molten chloride salts more reliably. Like the Ag/Ag+ reference electrode (RE), the Ni/Ni2+ SRE is made of commercially available materials. Initial experiments in molten CaCl2 and LiCl show the Ag/Ag+ RE potential drifting two times faster than the SRE. Furthermore, experiments show the replicability of SREs by comparing two Ni/Ni2+ SREs with different compositions of NiCl2 which is supportive of saturated phase behavior.
- 1 May 2024
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 171 (5) , 053508
Open AccessCommunication—The Development of a Stable and Practical Saturated Reference Electrode for Molten Chloride Salt Systems
A simply constructed, stable, Ni/Ni2+ saturated reference electrode (SRE) has potential to measure thermodynamic behavior of molten chloride salts more reliably. Like the Ag/Ag+ reference electrode (RE), the Ni/Ni2+ SRE is made of commercially available materials. Initial experiments in molten CaCl2 and LiCl show the Ag/Ag+ RE potential drifting two times faster than the SRE. Furthermore, experiments show the replicability of SREs by comparing two Ni/Ni2+ SREs with different compositions of NiCl2 which is supportive of saturated phase behavior.
- 28 February 2024
- Published by Taylor & Francis in Nuclear Technology
- Vol. 210 (8) , 1464-1474
In Situ Chlorine Generation and Rare Earth Chlorination by Molten Salt Electrolysis
- 28 February 2024
- Published by Taylor & Francis in Nuclear Technology
- Vol. 210 (8) , 1464-1474
In Situ Chlorine Generation and Rare Earth Chlorination by Molten Salt Electrolysis
- 28 August 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-01 (21) , 1545
A Semi-Differentiated Model for the Potential-Sweep Voltammograms of Electrochemical Deposition Reactions
Molten salt processes commonly occur in melts containing multiple electroactive analytes. A sensor’s voltammogram signals for these analytes may overlap, leading to inaccurate measurements. Semi-differentiation transforms the overlapping signals into more narrow, individually distinguishable peaks that can be analyzed accurately. Because some characteristics of these transforms are non-intuitive, this technique has been misapplied and misunderstood in the literature. For instance, the semi-differentiated peak current has been used to measure concentration without regard to the peak’s dependence on adsorption processes. Here, some non-intuitive characteristics of semi-derivatives are explored, the derived analytical expression is validated against experimental data from high-temperature molten salt systems, and best-practices for semi-differentiation are discussed.
- 28 August 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-01 (21) , 1545
A Semi-Differentiated Model for the Potential-Sweep Voltammograms of Electrochemical Deposition Reactions
Molten salt processes commonly occur in melts containing multiple electroactive analytes. A sensor’s voltammogram signals for these analytes may overlap, leading to inaccurate measurements. Semi-differentiation transforms the overlapping signals into more narrow, individually distinguishable peaks that can be analyzed accurately. Because some characteristics of these transforms are non-intuitive, this technique has been misapplied and misunderstood in the literature. For instance, the semi-differentiated peak current has been used to measure concentration without regard to the peak’s dependence on adsorption processes. Here, some non-intuitive characteristics of semi-derivatives are explored, the derived analytical expression is validated against experimental data from high-temperature molten salt systems, and best-practices for semi-differentiation are discussed.
- Open Access
- 1 June 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (6) , 063505
Bringing the Analysis of Electrodeposition Signals in Voltammetry Out of the Shadows
Voltammetry studies of electrodeposition are growing rapidly. Yet, relations for the analysis of electrodeposition reactions in voltammetry remain relatively obscure in the literature. The existing cyclic and square wave voltammetry relations for electrodeposition and their limitations are discussed to increase awareness. A retrospective analysis is performed to demonstrate the impact of model selection in improving the analysis of electrodeposition behavior with voltammetric data. A repository for voltammetry models of electrodeposition is proposed to further increase familiarity and application of the most appropriate models, which would support a rapidly growing area of research and technological development.
- 1 June 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (6) , 063505
Open AccessBringing the Analysis of Electrodeposition Signals in Voltammetry Out of the Shadows
Voltammetry studies of electrodeposition are growing rapidly. Yet, relations for the analysis of electrodeposition reactions in voltammetry remain relatively obscure in the literature. The existing cyclic and square wave voltammetry relations for electrodeposition and their limitations are discussed to increase awareness. A retrospective analysis is performed to demonstrate the impact of model selection in improving the analysis of electrodeposition behavior with voltammetric data. A repository for voltammetry models of electrodeposition is proposed to further increase familiarity and application of the most appropriate models, which would support a rapidly growing area of research and technological development.
- 14 March 2022
- Published by Elsevier in Electrochimica Acta
- Vol. 414
A comparison of square-wave voltammetry models to determine the number of electrons exchanged in metal deposition
- 14 March 2022
- Published by Elsevier in Electrochimica Acta
- Vol. 414
A comparison of square-wave voltammetry models to determine the number of electrons exchanged in metal deposition