YAYuichiro Ando

Yuichiro Ando

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yuichiro Ando has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Epitaxial Growth of Germanium Ultrathin Films on Ag(100) Thin Films on Ge(100) Substrates Prepared by Atomic Segregation Epitaxy

    by Masaki Ohno, Akio Ohta, Yuichiro Ando, Sho‐Ichi Takakura, Masashi Nakatake, Masashi Kurosawa, Junji Yuhara

    This study investigates the growth of germanene on an Ag(100) thin film on a Ge(100) substrate through germanium (Ge) segregation, using Auger electron spectroscopy, low‐energy electron diffraction (LEED), scanning tunneling microscopy (STM), and core‐level (CL) photoemission spectroscopy. A clean Ag(100) surface is obtained by annealing at 300 °C, and R45° spots are mainly seen in the LEED pattern after annealing at 370 °C. When annealed at 460 °C, a square‐shaped streak with a threefold Ag(100) periodicity appears in the LEED pattern, specifically the partially incommensurate (3 × n ) superstructure, where n is an arbitrary number. The STM images of the (3 × n ) superstructure reveal two domains rotated at 90°. After annealing at 540 °C, the LEED pattern displays an incommensurate sixfold symmetry (1.20 × 1.20) with a unit cell length of 0.40 nm. From angle‐resolved CL spectra, Ge atoms are found at the topmost surface of the Ag(100). CL spectra suggest that the chemical state is similar to that of germanene on Ag(111). These findings demonstrate the formation of a sixfold germanium atomic layer on Ag(100).


  • Spin Hall effect driven photocurrent in nonmagnetic single metals

    by Taiki Nishijima, Ryo Ohshima, Youichi Yanase, Ryota Ishii, Masashi Shiraishi, Yuichiro Ando


  • Open Access

    A circular photogalvanic effect in two-dimensional electron gas on the surface of SrTiO3

    by Mahiro Yamamoto, Taiki Nishijima, Ryo Ohshima, Yuichiro Ando, Masashi Shiraishi

    A spin-splitting state due to a Rashba-type spin–orbit interaction is investigated using two-dimensional electron gas (2DEG) at the surface of SrTiO3. The circular photogalvanic effect is utilized to detect the spin-splitting state. Both the polarization and incident light angle dependence of the measured photocurrent generated in the 2DEG unequivocally show the presence of surface spin splitting in the 2DEG, and variation of the carrier densities of the 2DEG provides further supporting evidence. This finding could pave the way for investigating spin textures and spin physics in two-dimensional carrier gas systems.


  • Circular photogalvanic effect in spin-splitting metallic state at the surface of SrTiO 3 substrates

    by Mahiro Yamamoto, Taiki Nishijima, Ryo Ohshima, Yuichiro Ando, Masashi Shiraishi

    2023 International Conference on Solid State Devices and Materials ,Circular photogalvanic effect in spin-splitting metallic state at the surface of SrTiO 3 substrates

  • Open Access

    Anomalous sign inversion of spin-orbit torque in ferromagnetic/nonmagnetic bilayer systems due to self-induced spin-orbit torque

    by Motomi Aoki, Ei Shigematsu, Ryo Ohshima, Teruya Shinjo, Masashi Shiraishi, Yuichiro Ando

    Self-induced spin-orbit torques (SI-SOTs) in ferromagnetic (FM) layers have been overlooked when estimating the spin Hall angle (SHA) of adjacent nonmagnetic (NM) layers. In this work, we observe anomalous sign inversion of the total SOT in the spin-torque ferromagnetic resonance due to the enhanced SI-SOT, and successfully rationalize the sign inversion through a theoretical calculation considering the SHE in both the NM and FM layers. The findings show that using an FM layer whose SHA sign is the same as that of the NM achieves efficient SOT-magnetization switching with the assistance of the SI-SOT. The contribution of the SI-SOT becomes salient for a weakly conductive NM layer, and conventional analyses that do not consider the SI-SOT can overestimate the SHA of the NM layer by a factor of more than 150.

  • Anomalous sign inversion of spin-orbit torque in ferromagnetic/nonmagnetic bilayer systems due to self-induced spin-orbit torque

    by Motomi Aoki, Ei Shigematsu, Ryo Ohshima, Teruya Shinjo, Masashi Shiraishi, Yuichiro Ando

    Self-induced spin-orbit torques (SI-SOTs) in ferromagnetic (FM) layers have been overlooked when estimating the spin Hall angle (SHA) of adjacent nonmagnetic (NM) layers. In this work, we observe anomalous sign inversion of the total SOT in the spin-torque ferromagnetic resonance due to the enhanced SI-SOT, and successfully rationalize the sign inversion through a theoretical calculation considering the SHE in both the NM and FM layers. The findings show that using an FM layer whose SHA sign is the same as that of the NM achieves efficient SOT-magnetization switching with the assistance of the SI-SOT. The contribution of the SI-SOT becomes salient for a weakly conductive NM layer, and conventional analyses that do not consider the SI-SOT can overestimate the SHA of the NM layer by a factor of more than 150.


  • Realization of efficient tuning of the Fermi level in iron-based ferrimagnetic alloys

    by N. Yamashita, E. Shigematsu, S. Honda, R. Ohshima, M. Shiraishi, Y. Ando

    The Stoner criterion allows only three single elements possessing room-temperature (RT) ferromagnetism: cobalt (Co), nickel (Ni), and iron (Fe). Although these three elements have played central roles in magnetism-based materials, their large work function (4.5∼5.2eV) is becoming a non-negligible obstacle for realization of spin devices using nonmetallic materials with finite energy gaps, because injection of electron spins into these nonmetallic materials is strongly hampered due to the large Schottky barrier height. Hence, a novel ferromagnetic or ferrimagnetic material simultaneously possessing RT ferromagnetism or ferrimagnetism and high Fermi energy is strongly required. Here, we show that an Fe-based alloy, iron-gadolinium (FeGd), allows circumvention of the obstacle. Surprisingly, only 20% of Gd incorporation in Fe dramatically modulates the Fermi energy from −4.8 to −3.0 eV, which is the largest modulation in all metallic alloys reported thus far. The coexistence of ferrimagnetism and nonzero spin polarization at RT of FeGd supports its abundant potential for future applications in low-carrier-density materials such as monolayer, organic, and nondegenerate inorganic semiconductors.


  • Efficient room-temperature magnetization direction detection by means of the enhanced anomalous Nernst effect in a Weyl ferromagnet

    by L. Leiva, S. Granville, Y. Zhang, S. Dushenko, E. Shigematsu, R. Ohshima, Y. Ando, M. Shiraishi

    Spintronic phenomena exhibiting a longitudinal resistance change under magnetization reversal are a quite novel feature in nanoscience, which has been intensively studied in hopes of realizing all-electrical magnetization direction detection devices, where no reference ferromagnetic layer is required. However, cryogenic temperatures and/or high magnetic fields have been required to achieve noticeable effects. Here, the high heat-to-charge conversion efficiency of the Heusler alloy Weyl semimetal Co2MnGa is exploited in single layer nanoscaled wires at room temperature to produce at least two orders of magnitude enhancement of the resistance change ratio, when compared with conventional ferromagnets. Such resistance change under magnetization reversal is consistently explained through temperature distribution simulations and direct thermoelectric measurements of the large anomalous Nernst effect (ANE) in this topologically nontrivial material. Although many reports consider ANE signals as perturbations or undesired artifacts, we demonstrate that they are dominant in this system and can be seized for nonvolatile memory readout, as shown in a prototype device. These results open up new horizons of using enhanced thermoelectric voltages in novel materials for magnetization direction detection in any system where significant temperature gradients exist.


  • Current-induced out-of-plane torques in a single permalloy layer with lateral structural asymmetry

    by Motomi Aoki, Ei Shigematsu, Ryo Ohshima, Teruya Shinjo, Masashi Shiraishi, Yuichiro Ando

    We investigated current-induced torques in a single permalloy layer connected to nonmagnetic electrodes with lateral inversion asymmetry by spin-torque ferromagnetic resonance. Considering the symmetry of the spin-torque ferromagnetic resonance spectrum with respect to the magnetic field direction, we successfully separated various types of torque. In addition to in-plane damping-like and field-like torques, we detected two additional components of out-of-plane (OOP) torques, the symmetries of which with respect to the magnetic field direction correspond to an OOP field-like torque and an OOP damping-like torque. We obtained the OOP torques in particular by breaking a lateral inversion symmetry of the nonmagnetic electrodes, and the sign of the torques is reversed by inverting the electrode structure. The microwave frequency dependence of the OOP torques indicates that the OOP torques are not attributable to a spin current but to the Oersted field generated by a nonuniform charge current, BOersted, and an inductive field, Binduc. (which originates from BOersted). We propose an external field-free and fast magnetization switching of a ferromagnetic layer with perpendicular magnetic anisotropy by using Binduc., which can be achieved only by fabricating the electrodes asymmetrically.


  • Influence of adjacent metal films on magnon propagation in Y3Fe5O12

    by Sotaro Mae, Ryo Ohshima, Ei Shigematsu, Yuichiro Ando, Teruya Shinjo, Masashi Shiraishi

    We studied a mechanism of magnon absorption from a magnon waveguide to adjacent metals. Magnon propagation in the yttrium-iron-garnet magnon waveguide induced/detected via coplanar waveguides was reduced by attaching metals to the magnon waveguide. In particular, the propagating magnon at the surface of the magnon waveguide was largely suppressed by attaching metal strips whereas the uniform or volume mode showed only a very slight decrease. A systematic study on the reduction of magnon propagation was performed by changing the material of metals, changing their thickness, and inserting SiO2 between the magnon waveguide and metals. The reduction in magnon propagation by SiO2 insertion indicated that the eddy-current contribution played a key role in magnon propagation with the magnon gate system with metal electrodes. Our study revealed the relationship between the magnon loss and metallic electrodes, which is indispensable in the fabrication of magnonic devices.