Adel E.-S. Goda
Adel E.-S. Goda has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Eman Hussein Abdel-Rahman
Chemistry Department, Faculty of Science, Menoufia University, Shebin El-Kom, 32511, Egypt
3 shared publications - Hamada Hassan Amer
Department of Chemistry, Turabah University College, Taif University, Taif 21944, Saudi Arabia
3 shared publications - Mohammed F. Hamza
School of Nuclear Science and Technology, University of South China, 28 Changsheng West Road, Hengyang 421001, China
3 shared publications - Saad H. Alotaibi
Department of Chemistry, Turabah University College, Taif University, P.O. Box 11099, Taif 21944, Saudi Arabia
3 shared publications - Yuezhou Wei
Institute of Nuclear Fuel Cycle and Materials, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
3 shared publications - Amr Fouda
Department of Botany and Microbiology, Faculty of Science, Al-Azhar University, Cairo, Egypt
2 shared publications
Latest Publications
- Open Access
Synthesis of a Novel Adsorbent Based on Chitosan Magnetite Nanoparticles for the High Sorption of Cr (VI) Ions: A Study of Photocatalysis and Recovery on Tannery Effluents
This study aims to evaluate the functionalization of chitosan biopolymer with heterocyclic moieties of 2-thioxodihydropyrimidine-4,6(1H,5H)-dione used for enhancing the sorption of Cr ions from aqueous solution. A synthesized sorbent is a nanoscale particle (around 5–7 nm), which explains the fast kinetics of sorption. The sorbent is specified using elemental analysis (EA), FTIR, BET (nitrogen sorption desorption isotherms), TGA, and SEM-EDX analyses. Sorption properties are investigated using ultraviolet emission (UV) but also using visible light (L). In the sorption diagram, the high sorption uptake and fast kinetics observed using ultraviolet conditions are shown. This work is conducted by removing Cr ions from highly contaminated tannery effluents, which have a high concentration of Cr associated with other poisonous elements such as Cd(II) and Pb(II). Under the selected conditions, complete sorption is performed during the first 60 and 45 min with a capacity of 2.05 and 2.5 mmol Cr g−1 for the crosslinked chitosan (without functionalization) in L and UV, respectively. This sorption is enhanced by functionalizing to 5.7 and 6.8 mmol Cr g−1 at the L and UV, respectively, as well as improving the sorption kinetics to 35 and 30 min for both techniques, respectively. The PFORE, and (Langmuir and Sips equations) fit the kinetics and isotherms, respectively.
Open AccessSynthesis of a Novel Adsorbent Based on Chitosan Magnetite Nanoparticles for the High Sorption of Cr (VI) Ions: A Study of Photocatalysis and Recovery on Tannery Effluents
This study aims to evaluate the functionalization of chitosan biopolymer with heterocyclic moieties of 2-thioxodihydropyrimidine-4,6(1H,5H)-dione used for enhancing the sorption of Cr ions from aqueous solution. A synthesized sorbent is a nanoscale particle (around 5–7 nm), which explains the fast kinetics of sorption. The sorbent is specified using elemental analysis (EA), FTIR, BET (nitrogen sorption desorption isotherms), TGA, and SEM-EDX analyses. Sorption properties are investigated using ultraviolet emission (UV) but also using visible light (L). In the sorption diagram, the high sorption uptake and fast kinetics observed using ultraviolet conditions are shown. This work is conducted by removing Cr ions from highly contaminated tannery effluents, which have a high concentration of Cr associated with other poisonous elements such as Cd(II) and Pb(II). Under the selected conditions, complete sorption is performed during the first 60 and 45 min with a capacity of 2.05 and 2.5 mmol Cr g−1 for the crosslinked chitosan (without functionalization) in L and UV, respectively. This sorption is enhanced by functionalizing to 5.7 and 6.8 mmol Cr g−1 at the L and UV, respectively, as well as improving the sorption kinetics to 35 and 30 min for both techniques, respectively. The PFORE, and (Langmuir and Sips equations) fit the kinetics and isotherms, respectively.
- Open Access
Grafting of Thiazole Derivative on Chitosan Magnetite Nanoparticles for Cadmium Removal—Application for Groundwater Treatment
The synthesis and developments of magnetic chitosan nanoparticles for high efficiency removal of the cadmium ions from aquatic medium are one of the most challenging techniques. Highly adsorptive composite (MCH-ATA) was produced by the reaction of chitosan with formaldehyde and amino thiazole derivative. The sorbent was characterized by FTIR, elemental analyses (EA), SEM-EDX, TEM analysis, TGA and titration (volumetric). The modified material includes high nitrogen and sulfur contents (i.e., 4.64 and 1.35 mmol g−1, respectively), compared to the pristine material (3.5 and 0 mmol g−1, respectively). The sorption was investigated for the removal of Cd(II) ions from synthetic (prepared) solution before being tested towards naturally contaminated groundwater in an industrial area. The functionalized sorbent shows a high loading capacity (1.78 mmol Cd g−1; 200 mg Cd g−1) compared to the pristine material (0.61 mmol Cd g−1; 68.57 mg Cd g−1), while removal of about 98% of Cd with capacity (6.4 mg Cd g−1) from polymetallic contaminated groundwater. The sorbent displays fast sorption kinetics compared to the non-modified composite (MCH); 30 min is sufficient for complete sorption for MCH-ATA, while 60–90 min for the MCH. PFORE fits sorption kinetics for both sorbents, whereas the Langmuir equation fits for MCH and Langmuir and Sips for MCH-ATA for sorption isotherms. The TEM analysis confirms the nano scale size, which limits the diffusion to intraparticle sorption properties. The 0.2 M HCl solution is a successful desorbing agent for the metal ions. The sorbent was applied for the removal of cadmium ions from the contaminated underground water and appears to be a promising process for metal decontamination and water treatment.
Open AccessGrafting of Thiazole Derivative on Chitosan Magnetite Nanoparticles for Cadmium Removal—Application for Groundwater Treatment
The synthesis and developments of magnetic chitosan nanoparticles for high efficiency removal of the cadmium ions from aquatic medium are one of the most challenging techniques. Highly adsorptive composite (MCH-ATA) was produced by the reaction of chitosan with formaldehyde and amino thiazole derivative. The sorbent was characterized by FTIR, elemental analyses (EA), SEM-EDX, TEM analysis, TGA and titration (volumetric). The modified material includes high nitrogen and sulfur contents (i.e., 4.64 and 1.35 mmol g−1, respectively), compared to the pristine material (3.5 and 0 mmol g−1, respectively). The sorption was investigated for the removal of Cd(II) ions from synthetic (prepared) solution before being tested towards naturally contaminated groundwater in an industrial area. The functionalized sorbent shows a high loading capacity (1.78 mmol Cd g−1; 200 mg Cd g−1) compared to the pristine material (0.61 mmol Cd g−1; 68.57 mg Cd g−1), while removal of about 98% of Cd with capacity (6.4 mg Cd g−1) from polymetallic contaminated groundwater. The sorbent displays fast sorption kinetics compared to the non-modified composite (MCH); 30 min is sufficient for complete sorption for MCH-ATA, while 60–90 min for the MCH. PFORE fits sorption kinetics for both sorbents, whereas the Langmuir equation fits for MCH and Langmuir and Sips for MCH-ATA for sorption isotherms. The TEM analysis confirms the nano scale size, which limits the diffusion to intraparticle sorption properties. The 0.2 M HCl solution is a successful desorbing agent for the metal ions. The sorbent was applied for the removal of cadmium ions from the contaminated underground water and appears to be a promising process for metal decontamination and water treatment.
- Open Access
Photocatalytic Efficacy of Heterocyclic Base Grafted Chitosan Magnetite Nanoparticles on Sorption of Pb(II); Application on Mining Effluent
Development of bio-based sorbents (i.e., chitosan moieties) at nanoscale size for the removal of metal contaminants is the main target of this research. Grafting with thiazole heterocyclic derivative gives fast kinetics sorption, highly metal loading, and good recyclability for mining leaching solution. Different analyses tools including (thermogravimetric analysis (TGA), scanning electron microscope and energy dispersive spectroscopy (SEM-EDX), X-ray diffraction (XRD), Fourier transform infrared (FTIR), BET surface area (nitrogen sorption desorption), titration, and TEM (transmission electron microscopy)) were used to investigate the chemical and textural properties of the functionalized sorbent. The sorption was measured in normal visible light and under UV emission. The highest capacity was measured at pH 5, which reached 0.251 mmol Pb g−1 in visible light compared with 0.346 mmol Pb g−1 under UV for the pristine crosslinked chitosan (MCc). The sorption performances were improved by functionalization; (0.7814 and 1.014 mmol Pb g−1) for the functionalized sorbent (MCa-ATA) under visible light and UV, respectively. PFORE (pseudo-first-order rate equation) and RIDE (resistance to intraparticle diffusion) fit kinetics, the Sips equation is the most fit profile for the sorption isotherms for the MCc in either light and UV processes, while PFORE and RIDE for kinetics under light and UV for MCa-ATA and Sips in light and Sips and Langmuir under the UV emission. Finally, the sorbent was investigated toward a raffinate solution from ore processing and shows promising extraction tools for the most interesting elements.
Open AccessPhotocatalytic Efficacy of Heterocyclic Base Grafted Chitosan Magnetite Nanoparticles on Sorption of Pb(II); Application on Mining Effluent
Development of bio-based sorbents (i.e., chitosan moieties) at nanoscale size for the removal of metal contaminants is the main target of this research. Grafting with thiazole heterocyclic derivative gives fast kinetics sorption, highly metal loading, and good recyclability for mining leaching solution. Different analyses tools including (thermogravimetric analysis (TGA), scanning electron microscope and energy dispersive spectroscopy (SEM-EDX), X-ray diffraction (XRD), Fourier transform infrared (FTIR), BET surface area (nitrogen sorption desorption), titration, and TEM (transmission electron microscopy)) were used to investigate the chemical and textural properties of the functionalized sorbent. The sorption was measured in normal visible light and under UV emission. The highest capacity was measured at pH 5, which reached 0.251 mmol Pb g−1 in visible light compared with 0.346 mmol Pb g−1 under UV for the pristine crosslinked chitosan (MCc). The sorption performances were improved by functionalization; (0.7814 and 1.014 mmol Pb g−1) for the functionalized sorbent (MCa-ATA) under visible light and UV, respectively. PFORE (pseudo-first-order rate equation) and RIDE (resistance to intraparticle diffusion) fit kinetics, the Sips equation is the most fit profile for the sorption isotherms for the MCc in either light and UV processes, while PFORE and RIDE for kinetics under light and UV for MCa-ATA and Sips in light and Sips and Langmuir under the UV emission. Finally, the sorbent was investigated toward a raffinate solution from ore processing and shows promising extraction tools for the most interesting elements.