Mitchell Anthony Wood

A new continuum-based mesoscale modeling approach for shock-induced chemical reactions (SICRs) in Ni+Al multilayers is demonstrated in Sandia’s shock physics hydrocode, CTH. The approach utilizes Arrhenius-type kinetics and artificial thermal conduction. Our work builds upon previous efforts to parameterize equations of state for NixAly [J. Appl. Phys. 137, 075102 (2025)], as well as simulations of inert shocks in realistic 2D microstructures [J. Appl. Phys. 137, 225301 (2025)]. To calibrate the reaction kinetics, pairs of the reaction coordinate, R′, vs time are extracted from the molecular dynamics (MD) literature. Here, the MD-informed kinetics are used to simulate the dynamic evolution of pressure and temperature in 2D mesoscale simulations. Overall, the MD-informed kinetics obtained for planar interfaces are too slow, as initial reaction is not observed on a nanosecond time scale. Even with quasi-periodic shock focusing leading to the formation of so-called “hot-spots,” the hot spots are unable to grow and coalesce using the fitted Arrhenius rate constants. However, by increasing the rate constants by two orders of magnitude, SICRs are observed at a shock pressure near 30 GPa, which is supported by experiments. Consequently, these mesoscale simulations suggest that unresolved shear-based mechanical mixing might possibly account for the discrepancies in kinetic rates, with shock-generated intense perturbations, interfacial vortical flows, and elevated temperatures serving as favorable reaction conditions. Future work will calibrate a shear-dependent reaction rate from the MD simulations with realistic interfaces that are wavy, diffuse, and disordered.

Energy conversion in energetic materials from shockwave-induced lattice compression to bond breaking critically depends on vibrational coupling and energy transfer between intra- and intermolecular vibrations, though the details of the mechanisms remain unknown. Herein, we indirectly tune the strength of intermolecular interactions in 3,4-bis(3-nitrofurazan-4-yl)furoxan (BNFF), a hydrogen-free energetic material characterized by van der Waals interactions, by applying high static pressure using a diamond anvil cell and monitoring vibrational energy transfer (VET) with ultrafast broadband infrared pump-probe spectroscopy. As BNFF is compressed from ambient pressure to 9 GPa, we find VET accelerates by ~0.9 ps/GPa. Density functional theory is applied in tandem with experiment to assign mode character and elucidate VET pathways. We find that furazan ring O-N-O vibrations, which are high-frequency detonation-relevant vibrational modes, experience increased sensitivity to lattice compression under shockwave pressures. These findings provide new mechanistic insight into how intermolecular interactions govern the rate and selectivity of VET.

Dynamic compression of iron to Earth-core conditions is one of the few ways to gather important elastic and transport properties needed to uncover key mechanisms surrounding the geodynamo effect. Herein, a machine-learned ab initio derived molecular-spin dynamics (MSD) methodology with explicit treatment for longitudinal spin-fluctuations is utilized to probe the dynamic phase-diagram of iron. This framework uniquely enables an accurate resolution of the phase-transition kinetics and Earth-core elastic properties, as highlighted by compressional wave velocity and adiabatic bulk moduli measurements. In addition, a unique coupling of MSD with time-dependent density functional theory enables gauging electronic transport properties, critically important for resolving geodynamo dynamics.

A new method is presented to generate atomic structures that reproduce the essential characteristics of arbitrary material systems, phases, or ensembles. Previous methods allow one to reproduce the essential characteristics (e.g. the chemical disorder) of a large random alloy within a small crystal structure. The ability to generate small representations of random alloys, along with the restriction to crystal systems, results from using the fixed-lattice cluster correlations to describe structural characteristics. A more general description of the structural characteristics of atomic systems is obtained using complete sets of atomic environment descriptors. These are used within for generating representative atomic structures without restriction to fixed lattices. A general data-driven approach is provided here utilizing the atomic cluster expansion (ACE) basis. The N-body ACE descriptors are a complete set of atomic environment descriptors that span both chemical and spatial degrees of freedom and are used within for describing atomic structures. The generalized representative structure (GRS) method presented within generates small atomic structures that reproduce ACE descriptor distributions corresponding to arbitrary structural and chemical complexity. It is shown that systematically improvable representations of crystalline systems on fixed parent lattices, amorphous materials, liquids, and ensembles of atomic structures may be produced efficiently through optimization algorithms. With the GRS method, we highlight reduced representations of atomistic machine-learning training datasets that contain similar amounts of information and small 40–72 atom representations of liquid phases. The ability to use GRS methodology as a driver for informed novel structure generation is also demonstrated. The advantages over other data-driven methods and state-of-the-art methods restricted to high-symmetry systems are highlighted.

Developing interatomic potentials for gas-metal systems is difficult due to the wide range of chemical compositions that the potential must be able to reproduce. There is a need for these types of potentials for studying plasma-material interactions in fusion reactors where gaseous plasma species will implant in metallic reactor components. The challenges presented by these material systems make them suitable candidates for treatment by a machine learning approach, such as that of the spectral neighbor analysis potential (SNAP). However, constraining the dynamics with these more flexible potentials is difficult. In this work, we have developed a SNAP potential for W-N and W-H in order to study the material degradation due to ion implantation in tungsten. We have developed a large set of density functional theory training data spanning multiple chemical environments including gas phase, surface, bulk, and gas-metal configurations. Additional methodologies for developing training data and optimizing the potential for accurately describing fast diffusing impurity species are detailed. The SNAP potential well-reproduces key material properties relevant for modeling plasma-material interactions including defect formation energies, surface adsorption energies, dimer binding energies, and tungsten nitride formation energies. In addition to testing on static energetic properties, the SNAP potential was also used to simulate thermal and dynamic gas-metal interactions, including bulk diffusion, molecular gas adsorption isotherms, and ion implantation. The SNAP potentials are demonstrated to well-reproduce behavior in the wide range of chemical environments investigated, demonstrating the suitability of these machine learned interatomic potentials for future studies of plasma material interactions.

Lack of rigorous reproducibility and validation are significant hurdles for scientific development across many fields. Materials science, in particular, encompasses a variety of experimental and theoretical approaches that require careful benchmarking. Leaderboard efforts have been developed previously to mitigate these issues. However, a comprehensive comparison and benchmarking on an integrated platform with multiple data modalities with perfect and defect materials data is still lacking. This work introduces JARVIS-Leaderboard, an open-source and community-driven platform that facilitates benchmarking and enhances reproducibility. The platform allows users to set up benchmarks with custom tasks and enables contributions in the form of dataset, code, and meta-data submissions. We cover the following materials design categories: Artificial Intelligence (AI), Electronic Structure (ES), Force-fields (FF), Quantum Computation (QC), and Experiments (EXP). For AI, we cover several types of input data, including atomic structures, atomistic images, spectra, and text. For ES, we consider multiple ES approaches, software packages, pseudopotentials, materials, and properties, comparing results to experiment. For FF, we compare multiple approaches for material property predictions. For QC, we benchmark Hamiltonian simulations using various quantum algorithms and circuits. Finally, for experiments, we use the inter-laboratory approach to establish benchmarks. There are 1281 contributions to 274 benchmarks using 152 methods with more than 8 million data points, and the leaderboard is continuously expanding. The JARVIS-Leaderboard is available at the website: https://pages.nist.gov/jarvis_leaderboard/

Lack of rigorous reproducibility and validation are major hurdles for scientific development across many fields. Materials science in particular encompasses a variety of experimental and theoretical approaches that require careful benchmarking. Leaderboard efforts have been developed previously to mitigate these issues. However, a comprehensive comparison and benchmarking on an integrated platform with multiple data modalities with both perfect and defect materials data is still lacking. This work introduces JARVIS-Leaderboard, an open-source and community-driven platform that facilitates benchmarking and enhances reproducibility. The platform allows users to set up benchmarks with custom tasks and enables contributions in the form of dataset, code, and meta-data submissions. We cover the following materials design categories: Artificial Intelligence (AI), Electronic Structure (ES), Force-fields (FF), Quantum Computation (QC) and Experiments (EXP). For AI, we cover several types of input data, including atomic structures, atomistic images, spectra, and text. For ES, we consider multiple ES approaches, software packages, pseudopotentials, materials, and properties, comparing results to experiment. For FF, we compare multiple approaches for material property predictions. For QC, we benchmark Hamiltonian simulations using various quantum algorithms and circuits. Finally, for experiments, we use the inter-laboratory approach to establish benchmarks. There are 1281 contributions to 274 benchmarks using 152 methods with more than 8 million data-points, and the leaderboard is continuously expanding. The JARVIS-Leaderboard is available at the website: https://pages.nist.gov/jarvis_leaderboard

The U.S. Department of Energy's Office of Scientific and Technical Information

The exceptional properties observed in complex concentrated alloys (CCAs) arise from the interplay between crystalline order and chemical disorder at the atomic scale, complicating a unique determination of properties. In contrast to conventional alloys, CCA properties emerge as distributions due to varying local chemical environments and the specific scale of measurement. Currently there are few ways to quantitatively define, track, and compare local alloy compositions (versus a global label, i.e. equiatomic) contained in a CCA. Molecular dynamics is used here to build descriptive metrics that connect a global alloy composition to the diverse local alloy compositions that define it. A machine-learned interatomic potential for MoNbTaTi is developed and we use these metrics to investigate how property distributions change with excursions in global-local composition space. Short-range order is examined through the lens of local chemistry for the equiatomic composition, demonstrating stark changes in vacancy formation energy with local chemistry evolution.