Jin Wei
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jin Wei has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
Guanqing Wu
School of Highway, Chang’an University, Xi’an, China
2 shared publicationsXiabing Yue
School of Highway, Chang’an University, Xi’an, China
2 shared publications- Guan-Qing Wu
Highway of School, Chang’an University, Xi’an 710064, China
1 shared publication - Haiding Bian
School of Highway, Chang’an University, Xi’an 710064, China
1 shared publication - Menghan Zhang
School of Highway, Chang'an University, Xi'an 710064, China
1 shared publication - Xiabing Yue
School of Highway, Chang’an University, Xi’an, China
1 shared publication
Latest Publications
- Open Access
- 6 February 2025
- Published by Periodica Polytechnica Budapest University of Technology and Economics in Periodica Polytechnica Civil Engineering
- Vol. 69 (2) , 505-518
Analysis of Slope Stability Based on Four Machine Learning Models
To achieve rapid and precise prediction of slope stability, we propose an intelligent assessment method utilizing machine learning techniques. This approach aims to enhance the precision of slope stability evaluations, facilitating more effective and timely decision-making in geotechnical engineering. By analyzing 188 slope cases from domestic and international sources, we have identified six key feature variables to evaluate the Factor of Safety (FOS) for slope stability assessment. The dataset was established for evaluating slope stability, and to ensure robustness, it was divided into training and testing set using a 5-fold cross-validation approach. Four slope stability prediction models- GBM, SVM, XGB, and RF- were developed using machine learning algorithms. The accuracy of the models in predicting FOS for slopes was assessed using metrics such as MAE, MSE, RMSE, and R2. The best-performing machine learning model, along with the finite element model developed using GeoStudio, was applied to engineering examples to compare their feasibility and efficiency. The research findings demonstrates that the GBM model has a minimal error between the predicted and actual slope FOS, highlighting its high accuracy. The model shows a strong correlation between predicted and actual FOS, indicating its superior performance relative to other models. GBM model and the finite element model align well with the actual field conditions. However, the GBM model stands out due to its higher accuracy and faster computational efficiency. Therefore, the GBM model offers a high degree of fit between the predicted FOS and the actual values, making it well-suited for evaluating slope stability.
- 6 February 2025
- Published by Periodica Polytechnica Budapest University of Technology and Economics in Periodica Polytechnica Civil Engineering
- Vol. 69 (2) , 505-518
Open AccessAnalysis of Slope Stability Based on Four Machine Learning Models
To achieve rapid and precise prediction of slope stability, we propose an intelligent assessment method utilizing machine learning techniques. This approach aims to enhance the precision of slope stability evaluations, facilitating more effective and timely decision-making in geotechnical engineering. By analyzing 188 slope cases from domestic and international sources, we have identified six key feature variables to evaluate the Factor of Safety (FOS) for slope stability assessment. The dataset was established for evaluating slope stability, and to ensure robustness, it was divided into training and testing set using a 5-fold cross-validation approach. Four slope stability prediction models- GBM, SVM, XGB, and RF- were developed using machine learning algorithms. The accuracy of the models in predicting FOS for slopes was assessed using metrics such as MAE, MSE, RMSE, and R2. The best-performing machine learning model, along with the finite element model developed using GeoStudio, was applied to engineering examples to compare their feasibility and efficiency. The research findings demonstrates that the GBM model has a minimal error between the predicted and actual slope FOS, highlighting its high accuracy. The model shows a strong correlation between predicted and actual FOS, indicating its superior performance relative to other models. GBM model and the finite element model align well with the actual field conditions. However, the GBM model stands out due to its higher accuracy and faster computational efficiency. Therefore, the GBM model offers a high degree of fit between the predicted FOS and the actual values, making it well-suited for evaluating slope stability.
- Open Access
Bearing Characteristics and Negative Skin Friction Preventive Measures for Highway Bridge Pile Foundations in Collapsible Loess Areas Under Water Immersion
In collapsible loess sites, large-scale collapsible settlement may occur after water immersion, which will reduce the bearing capacity of existing highway bridge pile foundations and pose serious potential safety hazards. Given this, a large-scale field pile foundation immersion–loading test was conducted in a collapsible loess site. The settlement law of collapsible loess during the immersion was obtained, the bearing characteristics of pile foundations under the loading and immersion–loading conditions were compared and analyzed, and the formation mechanism of negative skin friction was discussed. The results show that the degree of collapsible deformation is related to the duration of immersion, external load, boundary conditions, and soil layer depth. Whether the collapsible loess site is immersed or not can only change the value and transfer rate of the axial force of the pile foundation but cannot change its transfer law. The collapsible deformation will increase the utilization rate of the pile tip resistance. During the collapsible settlement process, part of the gravity of the soil around the pile will be transferred to the pile, generating negative skin friction on the pile shaft. On this basis, eight preventive measures for reducing the negative skin friction of pile foundations in collapsible loess sites were proposed. The research findings can serve as a valuable reference for the design and construction of highway bridge pile foundations in collapsible loess areas.
Open AccessBearing Characteristics and Negative Skin Friction Preventive Measures for Highway Bridge Pile Foundations in Collapsible Loess Areas Under Water Immersion
In collapsible loess sites, large-scale collapsible settlement may occur after water immersion, which will reduce the bearing capacity of existing highway bridge pile foundations and pose serious potential safety hazards. Given this, a large-scale field pile foundation immersion–loading test was conducted in a collapsible loess site. The settlement law of collapsible loess during the immersion was obtained, the bearing characteristics of pile foundations under the loading and immersion–loading conditions were compared and analyzed, and the formation mechanism of negative skin friction was discussed. The results show that the degree of collapsible deformation is related to the duration of immersion, external load, boundary conditions, and soil layer depth. Whether the collapsible loess site is immersed or not can only change the value and transfer rate of the axial force of the pile foundation but cannot change its transfer law. The collapsible deformation will increase the utilization rate of the pile tip resistance. During the collapsible settlement process, part of the gravity of the soil around the pile will be transferred to the pile, generating negative skin friction on the pile shaft. On this basis, eight preventive measures for reducing the negative skin friction of pile foundations in collapsible loess sites were proposed. The research findings can serve as a valuable reference for the design and construction of highway bridge pile foundations in collapsible loess areas.
- 30 July 2023
- Published by Springer Nature in International Journal of Steel Structures
- Vol. 23 (5) , 1294-1304
Effects of Corrugated Steel Pipe Parameters on the Stress and Deformation of a Highway Subgrade Culvert
- 30 July 2023
- Published by Springer Nature in International Journal of Steel Structures
- Vol. 23 (5) , 1294-1304
Effects of Corrugated Steel Pipe Parameters on the Stress and Deformation of a Highway Subgrade Culvert
- 28 June 2022
- Published by Springer Nature in Journal of Mountain Science
- Vol. 19 (6) , 1767-1781
Water migration in subgrade soil under seasonal freeze-thaw cycles in an alpine meadow on the Qinghai-Tibet Plateau
- 28 June 2022
- Published by Springer Nature in Journal of Mountain Science
- Vol. 19 (6) , 1767-1781
Water migration in subgrade soil under seasonal freeze-thaw cycles in an alpine meadow on the Qinghai-Tibet Plateau