Lisa Heymann
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lisa Heymann has a total of 93 co-authors. Here are the top co-authors by number of shared publications:
- Felix Gunkel
Forschungszentrum Jülich
9 shared publications - Christoph Baeumer
University of Twente
8 shared publications - Moritz Lukas Weber
International Institute for Carbon-Neutral Energy Research (WPI-I2CNER), Kyushu University, 744 Motooka, Nishi-ku, Fukuoka, Japan, 819-0395
6 shared publications Felix Gunkel
5 shared publications- Regina Dittmann
Forschungszentrum Jülich
5 shared publications - Ainara Aguadero
Instituto de Ciencia de Materiales de Madrid (ICMM), CSIC
3 shared publications
Latest Publications
- Open Access
- 16 February 2026
- Published by Elsevier in Materials Today Sustainability
- Vol. 34
Material sustainability evaluation of electrocatalysts in early-stage research – case study on La0.6Sr0.4CoO3-δ and La0.6Ca0.4FeO3-δ in alkaline water electrolysis
- 16 February 2026
- Published by Elsevier in Materials Today Sustainability
- Vol. 34
Open AccessMaterial sustainability evaluation of electrocatalysts in early-stage research – case study on La0.6Sr0.4CoO3-δ and La0.6Ca0.4FeO3-δ in alkaline water electrolysis
- Open Access
- 25 July 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (16) , 13768-13777
Transient Surface Degradation of LSCO and LSFO during OER in Alkaline Electrolyte under Dynamic Cycling Conditions
- 25 July 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (16) , 13768-13777
Open AccessTransient Surface Degradation of LSCO and LSFO during OER in Alkaline Electrolyte under Dynamic Cycling Conditions
- Open Access
- 31 March 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (14) , 21110-21121
Revealing the Intrinsic Oxygen Evolution Reaction Activity of Perovskite Oxides across Conductivity Ranges Using Thin Film Model Systems
The development of efficient electrocatalysts in water electrolysis is essential to decrease the high overpotentials, especially at the anode where the oxygen evolution reaction (OER) takes place. However, establishing catalyst design rules to find the optimal electrocatalysts is a substantial challenge. Complex oxides, which are often considered as suitable OER catalysts, can exhibit vastly different conductivity values, making it challenging to separate intrinsic catalytic activities from internal transport limitations. Here, we systematically decouple the limitations arising from electrical bulk resistivity, contact resistances to the catalyst support, and intrinsic OER catalytic properties using a systematic epitaxial thin film model catalyst approach. We investigate the influence of the resistivity of the three perovskite oxides LaNiO3-δ (3.7 × 10-4 Ω cm), La0.67Sr0.33MnO3-δ (2.7 × 10-3 Ω cm), and La0.6Ca0.4FeO3-δ (0.57 Ω·cm) on the observed catalytic activity. We tuned the electron pathway through the catalyst bulk by comparing insulating and conductive substrates. The conducting substrate reduces the electron pathway through the catalyst bulk from the millimeter to nanometer length scale. As we show, for the large electron pathways, the observed catalytic activity scales with resistivity because of a highly inhomogeneous lateral current density distribution. At the same time, even on the conducting substrate (Nb-doped SrTiO3), large contact resistances occur that limit the determination of intrinsic catalytic properties. By inserting interfacial dipole layers (in this case, LaAlO3) we lifted these interface resistances, allowing us to reveal the intrinsic catalytic properties of all examined catalysts. We find that La0.6Ca0.4FeO3-δ and LaNiO3-δ exhibit a similar intrinsic overpotential of 0.36 V at 0.1 mA/cm2, while their resistivities differ by 3 orders of magnitude. This finding shows that optimizing the electron pathway of the OER catalyst can lead the way to find new structure-activity relationships and to identify high-activity catalysts even if the electronic resistance is high.
- 31 March 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (14) , 21110-21121
Open AccessRevealing the Intrinsic Oxygen Evolution Reaction Activity of Perovskite Oxides across Conductivity Ranges Using Thin Film Model Systems
The development of efficient electrocatalysts in water electrolysis is essential to decrease the high overpotentials, especially at the anode where the oxygen evolution reaction (OER) takes place. However, establishing catalyst design rules to find the optimal electrocatalysts is a substantial challenge. Complex oxides, which are often considered as suitable OER catalysts, can exhibit vastly different conductivity values, making it challenging to separate intrinsic catalytic activities from internal transport limitations. Here, we systematically decouple the limitations arising from electrical bulk resistivity, contact resistances to the catalyst support, and intrinsic OER catalytic properties using a systematic epitaxial thin film model catalyst approach. We investigate the influence of the resistivity of the three perovskite oxides LaNiO3-δ (3.7 × 10-4 Ω cm), La0.67Sr0.33MnO3-δ (2.7 × 10-3 Ω cm), and La0.6Ca0.4FeO3-δ (0.57 Ω·cm) on the observed catalytic activity. We tuned the electron pathway through the catalyst bulk by comparing insulating and conductive substrates. The conducting substrate reduces the electron pathway through the catalyst bulk from the millimeter to nanometer length scale. As we show, for the large electron pathways, the observed catalytic activity scales with resistivity because of a highly inhomogeneous lateral current density distribution. At the same time, even on the conducting substrate (Nb-doped SrTiO3), large contact resistances occur that limit the determination of intrinsic catalytic properties. By inserting interfacial dipole layers (in this case, LaAlO3) we lifted these interface resistances, allowing us to reveal the intrinsic catalytic properties of all examined catalysts. We find that La0.6Ca0.4FeO3-δ and LaNiO3-δ exhibit a similar intrinsic overpotential of 0.36 V at 0.1 mA/cm2, while their resistivities differ by 3 orders of magnitude. This finding shows that optimizing the electron pathway of the OER catalyst can lead the way to find new structure-activity relationships and to identify high-activity catalysts even if the electronic resistance is high.
- Open Access
- 6 January 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Chemical Termination and Interfacial Redox Behavior of Freestanding SrTiO3
Tailoring oxide heterointerfaces has sparked the search for electronic and ionic phenomena in low-dimensional, confined systems. The fabrication of freestanding oxide membranes has further expanded the possible fields of application. Based on the structural vulnerability and physical confinement of such membranes, it remains a great challenge to achieve atomically defined and single-terminated surfaces by the typical chemical treatments and to induce interfacial redox-reactions in these nanoscopic transition metal oxides. To address this, we use the sacrificial layer exfoliation route, involving an all-perovskite epitaxial layer structure to fabricate freestanding SrTiO3 membranes with high crystallinity and defined surface morphology. To study the interfacial redox-behavior of the singly TiO2-terminated, annealed membrane, we employ the formation of oxygen vacancies in SrTiO3, triggered by the low-pressure deposition of a thin LaAlO3 layer epitaxially grown on the transferred SrTiO3 layer. A mixed Ti3+/4+ valence state is indicative of the induced transfer of oxygen ions from the confined SrTiO3 membrane into the LaAlO3 overlayer, resulting in an oxygen vacancy concentration around 1021 cm−3 in the confined SrTiO3 membrane. Our results highlight that interfacial redox-reactions can be induced in SrTiO3 membranes, which enables the ionic engineering of confined oxides heterointerfaces based on the freestanding oxide approach.
- 6 January 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessChemical Termination and Interfacial Redox Behavior of Freestanding SrTiO3
Tailoring oxide heterointerfaces has sparked the search for electronic and ionic phenomena in low-dimensional, confined systems. The fabrication of freestanding oxide membranes has further expanded the possible fields of application. Based on the structural vulnerability and physical confinement of such membranes, it remains a great challenge to achieve atomically defined and single-terminated surfaces by the typical chemical treatments and to induce interfacial redox-reactions in these nanoscopic transition metal oxides. To address this, we use the sacrificial layer exfoliation route, involving an all-perovskite epitaxial layer structure to fabricate freestanding SrTiO3 membranes with high crystallinity and defined surface morphology. To study the interfacial redox-behavior of the singly TiO2-terminated, annealed membrane, we employ the formation of oxygen vacancies in SrTiO3, triggered by the low-pressure deposition of a thin LaAlO3 layer epitaxially grown on the transferred SrTiO3 layer. A mixed Ti3+/4+ valence state is indicative of the induced transfer of oxygen ions from the confined SrTiO3 membrane into the LaAlO3 overlayer, resulting in an oxygen vacancy concentration around 1021 cm−3 in the confined SrTiO3 membrane. Our results highlight that interfacial redox-reactions can be induced in SrTiO3 membranes, which enables the ionic engineering of confined oxides heterointerfaces based on the freestanding oxide approach.
- Open Access
- 25 November 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Material sustainability evaluation of electrocatalysts in early-stage development
Sustainable energy materials for energy storage applications are crucial for a reliable energy transition. However, evaluating material sustainability in early stages of energy material research is a big challenge, as it is difficult to predict the final industrial process and supply chain of the investigated material. In this work we showcase that a sustainability evaluation can already be conducted in the early stage of electrocatalyst research. We provide a case study of two highly active alkaline oxygen evolution catalysts La0.6Sr0.4CoO3-δ and La0.6Ca0.4FeO3-δ with a thin film model catalyst approach. For the sustainability evaluation, we consider the material criticality, compare precursor prices, conduct an environmental impact analysis of the precursors based on life cycle assessment and provide a qualitative discourse for social impacts of raw material extraction. We find that La0.6Ca0.4FeO3-δ has a reduced environmental footprint, smaller precursor supply risk and 10 times lower precursor price compared to La0.6Sr0.4CoO3-δ. However, for both perovskites the high environmental impact and high supply risk of lanthanum is of immediate concern towards larger scale application purposes. Sustainability evaluation in the early stages of energy material research can be a great chance to develop new material selection strategies leveraging sustainability in later stages of materials research for the energy transition.
- 25 November 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessMaterial sustainability evaluation of electrocatalysts in early-stage development
Sustainable energy materials for energy storage applications are crucial for a reliable energy transition. However, evaluating material sustainability in early stages of energy material research is a big challenge, as it is difficult to predict the final industrial process and supply chain of the investigated material. In this work we showcase that a sustainability evaluation can already be conducted in the early stage of electrocatalyst research. We provide a case study of two highly active alkaline oxygen evolution catalysts La0.6Sr0.4CoO3-δ and La0.6Ca0.4FeO3-δ with a thin film model catalyst approach. For the sustainability evaluation, we consider the material criticality, compare precursor prices, conduct an environmental impact analysis of the precursors based on life cycle assessment and provide a qualitative discourse for social impacts of raw material extraction. We find that La0.6Ca0.4FeO3-δ has a reduced environmental footprint, smaller precursor supply risk and 10 times lower precursor price compared to La0.6Sr0.4CoO3-δ. However, for both perovskites the high environmental impact and high supply risk of lanthanum is of immediate concern towards larger scale application purposes. Sustainability evaluation in the early stages of energy material research can be a great chance to develop new material selection strategies leveraging sustainability in later stages of materials research for the energy transition.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (50) , 5113
Space Charge Effects on the Reaction Kinetics of Metal Exsolution and the Coalescence of Exsolved Nanoparticles
Metal exsolution reactions can be driven in fuel electrode materials under the reducing operation conditions of solid oxide cells. The process enables the synthesis of nanostructured catalysts based on the release of a fraction of reducible dopants from a perovskite host to its’ surface and the subsequent nucleation of finely dispersed oxide-supported metal nanoparticles. The performance of such catalysts strongly depends on the nanoparticle characteristics, such as the nanoparticle size and nanoparticle density. Consequently, dynamic structural and chemical changes of catalyst materials under operation conditions, oftentimes particularly affecting the catalyst surface i.e. the electrochemical interface, play a crucial role for the activity and stability of electrocatalysts. It is essential to understand the mechanistic processes that govern the material response to improve the lifetime of energy conversion devices such as water splitting catalysts or solid oxide cells. We employ epitaxial thin films with atomically defined surface morphologies to study the exsolution kinetics with respect to the mass transport of Ni dopants from the bulk to the perovskite surface. In addition, we investigate the subsequent growth and coalescence behavior of the exsolved nanoparticles during thermal reduction of the thin film samples. For this purpose, different approaches of defect-engineering are explored to investigate the role of donor-type and acceptor-type defect chemistry as well as the role of dislocations for exsolution reactions. We demonstrate that the electrostatic interactions of exsolution-active dopants with the surface potential that is correlated to the inherent surface space charge region of perovskite oxides determines the kinetics of metal exsolution in our material system. Moreover, we reveal that defects that form under the reducing reaction conditions at the surface of the perovskite support can accelerate nanoparticle clustering and hence degradation of metal exsolution catalysts. In addition, we show that dislocations may serve as preferential nucleation sites for nanoparticles during metal exsolution. Based on our findings, we derive strategies for the control of the metal exsolution dynamics and for the stabilization of exsolved nanoparticles.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (50) , 5113
Space Charge Effects on the Reaction Kinetics of Metal Exsolution and the Coalescence of Exsolved Nanoparticles
Metal exsolution reactions can be driven in fuel electrode materials under the reducing operation conditions of solid oxide cells. The process enables the synthesis of nanostructured catalysts based on the release of a fraction of reducible dopants from a perovskite host to its’ surface and the subsequent nucleation of finely dispersed oxide-supported metal nanoparticles. The performance of such catalysts strongly depends on the nanoparticle characteristics, such as the nanoparticle size and nanoparticle density. Consequently, dynamic structural and chemical changes of catalyst materials under operation conditions, oftentimes particularly affecting the catalyst surface i.e. the electrochemical interface, play a crucial role for the activity and stability of electrocatalysts. It is essential to understand the mechanistic processes that govern the material response to improve the lifetime of energy conversion devices such as water splitting catalysts or solid oxide cells. We employ epitaxial thin films with atomically defined surface morphologies to study the exsolution kinetics with respect to the mass transport of Ni dopants from the bulk to the perovskite surface. In addition, we investigate the subsequent growth and coalescence behavior of the exsolved nanoparticles during thermal reduction of the thin film samples. For this purpose, different approaches of defect-engineering are explored to investigate the role of donor-type and acceptor-type defect chemistry as well as the role of dislocations for exsolution reactions. We demonstrate that the electrostatic interactions of exsolution-active dopants with the surface potential that is correlated to the inherent surface space charge region of perovskite oxides determines the kinetics of metal exsolution in our material system. Moreover, we reveal that defects that form under the reducing reaction conditions at the surface of the perovskite support can accelerate nanoparticle clustering and hence degradation of metal exsolution catalysts. In addition, we show that dislocations may serve as preferential nucleation sites for nanoparticles during metal exsolution. Based on our findings, we derive strategies for the control of the metal exsolution dynamics and for the stabilization of exsolved nanoparticles.
- Open Access
- 17 November 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Revealing the intrinsic oxygen evolution reaction activity of perovskite oxides across conductivity ranges using thin film model systems
The development of efficient electrocatalysts in water electrolysis is essential to decrease the high overpotentials especially at the anode where the oxygen evolution reaction (OER) takes place. However, establishing catalyst design rules to find optimal electrocatalysts is a substantial challenge. Complex oxides, which are often considered as suitable OER catalysts, can exhibit vastly different conductivity values, making it challenging to separate intrinsic catalytic activities from internal transport limitations. Here, we systematically decouple the limitations arising from electrical bulk resistivity, contact resistances to the catalyst support, and intrinsic OER catalytic properties using a systematic epitaxial thin film model catalyst approach. We investigate the influence of the resistivity of the three perovskite oxides LaNiO3-δ (3.7x10-4 Ωcm), La0.67Sr0.33MnO3-δ (2.7x10-3 Ωcm) and La0.6Ca0.4FeO3-δ, (0.57 Ωcm) on the observed catalytic activity. We tune the electron pathway through the catalyst bulk by comparing insulating and conductive substrates. The conducting substrate reduces the electron pathway through the catalyst bulk from millimeter to nanometer length scale. As we show, for the large electron pathways, the observed catalytic activity scales with the resistivity because of a highly inhomogeneous lateral current density distribution. At the same time, even on the conducting substrate (Nb-doped SrTiO3), large contact resistances occur that limit the determination of intrinsic catalytic properties. By inserting interfacial dipole layers (in this case LaAlO3) we lifted these interface resistances, allowing us to reveal the intrinsic catalytic properties of all examined catalysts. We find that La0.6Ca0.4FeO3-δ and LaNiO3-δ exhibit a similar intrinsic overpotential of 0.36 V at 0.1 mA/cm2, while their resistivities differ by three orders of magnitude. This finding shows that optimizing the electron pathway of OER catalyst can lead the way to find new structure-activity relationships and to identify high-activity catalysts even if the electronic resistance is high.
- 17 November 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessRevealing the intrinsic oxygen evolution reaction activity of perovskite oxides across conductivity ranges using thin film model systems
The development of efficient electrocatalysts in water electrolysis is essential to decrease the high overpotentials especially at the anode where the oxygen evolution reaction (OER) takes place. However, establishing catalyst design rules to find optimal electrocatalysts is a substantial challenge. Complex oxides, which are often considered as suitable OER catalysts, can exhibit vastly different conductivity values, making it challenging to separate intrinsic catalytic activities from internal transport limitations. Here, we systematically decouple the limitations arising from electrical bulk resistivity, contact resistances to the catalyst support, and intrinsic OER catalytic properties using a systematic epitaxial thin film model catalyst approach. We investigate the influence of the resistivity of the three perovskite oxides LaNiO3-δ (3.7x10-4 Ωcm), La0.67Sr0.33MnO3-δ (2.7x10-3 Ωcm) and La0.6Ca0.4FeO3-δ, (0.57 Ωcm) on the observed catalytic activity. We tune the electron pathway through the catalyst bulk by comparing insulating and conductive substrates. The conducting substrate reduces the electron pathway through the catalyst bulk from millimeter to nanometer length scale. As we show, for the large electron pathways, the observed catalytic activity scales with the resistivity because of a highly inhomogeneous lateral current density distribution. At the same time, even on the conducting substrate (Nb-doped SrTiO3), large contact resistances occur that limit the determination of intrinsic catalytic properties. By inserting interfacial dipole layers (in this case LaAlO3) we lifted these interface resistances, allowing us to reveal the intrinsic catalytic properties of all examined catalysts. We find that La0.6Ca0.4FeO3-δ and LaNiO3-δ exhibit a similar intrinsic overpotential of 0.36 V at 0.1 mA/cm2, while their resistivities differ by three orders of magnitude. This finding shows that optimizing the electron pathway of OER catalyst can lead the way to find new structure-activity relationships and to identify high-activity catalysts even if the electronic resistance is high.
- Open Access
- 9 November 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-14
Thermal stability and coalescence dynamics of exsolved metal nanoparticles at charged perovskite surfaces
Exsolution reactions enable the synthesis of oxide-supported metal nanoparticles, which are desirable as catalysts in green energy conversion technologies. It is crucial to precisely tailor the nanoparticle characteristics to optimize the catalysts’ functionality, and to maintain the catalytic performance under operation conditions. We use chemical (co)-doping to modify the defect chemistry of exsolution-active perovskite oxides and examine its influence on the mass transfer kinetics of Ni dopants towards the oxide surface and on the subsequent coalescence behavior of the exsolved nanoparticles during a continuous thermal reduction treatment. Nanoparticles that exsolve at the surface of the acceptor-type fast-oxygen-ion-conductor SrTi0.95Ni0.05O3−δ (STNi) show a high surface mobility leading to a very low thermal stability compared to nanoparticles that exsolve at the surface of donor-type SrTi0.9Nb0.05Ni0.05O3−δ (STNNi). Our analysis indicates that the low thermal stability of exsolved nanoparticles at the acceptor-doped perovskite surface is linked to a high oxygen vacancy concentration at the nanoparticle-oxide interface. For catalysts that require fast oxygen exchange kinetics, exsolution synthesis routes in dry hydrogen conditions may hence lead to accelerated degradation, while humid reaction conditions may mitigate this failure mechanism.
- 9 November 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-14
Open AccessThermal stability and coalescence dynamics of exsolved metal nanoparticles at charged perovskite surfaces
Exsolution reactions enable the synthesis of oxide-supported metal nanoparticles, which are desirable as catalysts in green energy conversion technologies. It is crucial to precisely tailor the nanoparticle characteristics to optimize the catalysts’ functionality, and to maintain the catalytic performance under operation conditions. We use chemical (co)-doping to modify the defect chemistry of exsolution-active perovskite oxides and examine its influence on the mass transfer kinetics of Ni dopants towards the oxide surface and on the subsequent coalescence behavior of the exsolved nanoparticles during a continuous thermal reduction treatment. Nanoparticles that exsolve at the surface of the acceptor-type fast-oxygen-ion-conductor SrTi0.95Ni0.05O3−δ (STNi) show a high surface mobility leading to a very low thermal stability compared to nanoparticles that exsolve at the surface of donor-type SrTi0.9Nb0.05Ni0.05O3−δ (STNNi). Our analysis indicates that the low thermal stability of exsolved nanoparticles at the acceptor-doped perovskite surface is linked to a high oxygen vacancy concentration at the nanoparticle-oxide interface. For catalysts that require fast oxygen exchange kinetics, exsolution synthesis routes in dry hydrogen conditions may hence lead to accelerated degradation, while humid reaction conditions may mitigate this failure mechanism.
- Open Access
- 26 December 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Thermal stability and coalescence dynamics of exsolved metal nanoparticles at charged perovskite surfaces
Exsolution reactions enable the synthesis of oxide-supported metal nanoparticles, desir- able as catalysts in green energy conversion technologies. It is crucial to precisely tai- lor the nanoparticle characteristics to tune the catalysts’ functionality, and to maintain the catalytic performance under operation conditions. We use chemical (co)-doping to modify the defect chemistry of exsolution-active perovskite oxides and we examine the Ni exsolu- tion behavior at atomically smooth surfaces of p-type SrTi0.95Ni0.05O3−δ (STNi) and n-type SrTi0.9Nb0.05Ni0.05O3−δ (STNNi) with identical (001) surface orientation. We identify dis- tinct differences in the mass transfer kinetics of Ni dopants towards the oxide surface and in the subsequent coalescence behavior of the exsolved nanoparticles at the perovskite surface during a continuous thermal reduction treatment. Nanoparticles that exsolve at the surface of the p-type fast-oxygen-ion-conductor STNi show a high surface mobility and thus a very low thermal stability compared to nanoparticles that exsolve at the surface of n-type STNNi. Our analysis indicates that the low thermal stability of exsolved nanoparticles at the acceptor-doped perovskite surface is associated to a large oxygen vacancy concentration at the nanoparticle-oxide interface, hampering the applicability of the exsolution synthesis route for catalysts that require a fast oxygen exchange kinetics.
- 26 December 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessThermal stability and coalescence dynamics of exsolved metal nanoparticles at charged perovskite surfaces
Exsolution reactions enable the synthesis of oxide-supported metal nanoparticles, desir- able as catalysts in green energy conversion technologies. It is crucial to precisely tai- lor the nanoparticle characteristics to tune the catalysts’ functionality, and to maintain the catalytic performance under operation conditions. We use chemical (co)-doping to modify the defect chemistry of exsolution-active perovskite oxides and we examine the Ni exsolu- tion behavior at atomically smooth surfaces of p-type SrTi0.95Ni0.05O3−δ (STNi) and n-type SrTi0.9Nb0.05Ni0.05O3−δ (STNNi) with identical (001) surface orientation. We identify dis- tinct differences in the mass transfer kinetics of Ni dopants towards the oxide surface and in the subsequent coalescence behavior of the exsolved nanoparticles at the perovskite surface during a continuous thermal reduction treatment. Nanoparticles that exsolve at the surface of the p-type fast-oxygen-ion-conductor STNi show a high surface mobility and thus a very low thermal stability compared to nanoparticles that exsolve at the surface of n-type STNNi. Our analysis indicates that the low thermal stability of exsolved nanoparticles at the acceptor-doped perovskite surface is associated to a large oxygen vacancy concentration at the nanoparticle-oxide interface, hampering the applicability of the exsolution synthesis route for catalysts that require a fast oxygen exchange kinetics.
- 22 December 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-02 (58) , 2824
Separating the Effects of Band Bending and Covalency in Hybrid Perovskite Oxide Electrocatalyst Bilayers for Water Electrolysis
Testing single crystalline epitaxial thin films as model systems for metal oxide electrocatalysts in the oxygen evolution reaction (OER) enables differentiating the OER descriptors such as crystal facet orientation, surface chemical composition, electronic structure and band bending at the interface to the electrolyte [1,2,3]. We designed single crystalline perovskite oxide bilayer structures to systematically tune the surface electronic structure and the band bending at the electrode/electrolyte interface to understand their role in the OER. The Co−O covalency in perovskite oxide cobaltites such as La1 − x SrxCoO3 is believed to impact the electrocatalytic activity during the OER. Additionally, space charge layers through band bending at the interface to the electrolyte may affect the electron transfer into the electrode, complicating the analysis and identification of true OER activity descriptors. Here, we separate the influence of covalency and band bending in hybrid epitaxial bilayer structures of highly OER-active La0.6Sr0.4CoO3 and undoped and less-active LaCoO3. Ultrathin LaCoO3 capping layers of 2−8 unit cells on La0.6Sr0.4CoO3 show intermediate OER activity between La0.6Sr0.4CoO3 and LaCoO3 evidently caused by the increased surface Co−O covalency compared to single LaCoO3 as detected by X-ray photoelectron spectroscopy. A Mott−Schottky analysis revealed low flat band potentials for different LaCoO3 capping layer thicknesses, indicating that no limiting extended space charge layer exists under OER conditions as all catalyst bilayer films exhibited hole accumulation at the surface [1]. The combined X-ray photoelectron spectroscopy and Mott−Schottky analysis of atomically defined bilayer structures thus enables us to differentiate between the influence of the covalency and intrinsic space charge layers, which are indistinguishable in a single physical or electrochemical characterization. Our results emphasize the prominent role of transition metal oxygen covalency in perovskite electrocatalysts and introduce a bilayer approach to fine-tune the surface electronic structure [1]. [1] L. Heymann, M. L. Weber, M. Wohlgemuth, M. Risch, R. Dittmann, C. Baeumer, F. Gunkel (2022) Separating the Effects of Band Bending and Covalency in Hybrid Perovskite Oxide Electrocatalyst Bilayers for Water Electrolysis, ACS Appl. Mater. Interfaces [2] M. Wohlgemuth, M. L. Weber, L. Heymann, C. Baeumer, F. Gunkel (2022) Activity-Stability Relationships in Oxide Electrocatalysts for Water Electrolysis, Front. Chem. [3] M. L. Weber, G. Lole, A. Kormanyos, A. Schwiers, L. Heymann, F. D. Speck, T. Meyer, R. Dittmann, S. Cherevko, C. Jooss, C. Baeumer, F. Gunkel, (2022) Atomistic Insights into Activation and Degradation of La0.6Sr0.4CoO3-δ Electrocatalysts under Oxygen Evolution Conditions Figure 1
- 22 December 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-02 (58) , 2824
Separating the Effects of Band Bending and Covalency in Hybrid Perovskite Oxide Electrocatalyst Bilayers for Water Electrolysis
Testing single crystalline epitaxial thin films as model systems for metal oxide electrocatalysts in the oxygen evolution reaction (OER) enables differentiating the OER descriptors such as crystal facet orientation, surface chemical composition, electronic structure and band bending at the interface to the electrolyte [1,2,3]. We designed single crystalline perovskite oxide bilayer structures to systematically tune the surface electronic structure and the band bending at the electrode/electrolyte interface to understand their role in the OER. The Co−O covalency in perovskite oxide cobaltites such as La1 − x SrxCoO3 is believed to impact the electrocatalytic activity during the OER. Additionally, space charge layers through band bending at the interface to the electrolyte may affect the electron transfer into the electrode, complicating the analysis and identification of true OER activity descriptors. Here, we separate the influence of covalency and band bending in hybrid epitaxial bilayer structures of highly OER-active La0.6Sr0.4CoO3 and undoped and less-active LaCoO3. Ultrathin LaCoO3 capping layers of 2−8 unit cells on La0.6Sr0.4CoO3 show intermediate OER activity between La0.6Sr0.4CoO3 and LaCoO3 evidently caused by the increased surface Co−O covalency compared to single LaCoO3 as detected by X-ray photoelectron spectroscopy. A Mott−Schottky analysis revealed low flat band potentials for different LaCoO3 capping layer thicknesses, indicating that no limiting extended space charge layer exists under OER conditions as all catalyst bilayer films exhibited hole accumulation at the surface [1]. The combined X-ray photoelectron spectroscopy and Mott−Schottky analysis of atomically defined bilayer structures thus enables us to differentiate between the influence of the covalency and intrinsic space charge layers, which are indistinguishable in a single physical or electrochemical characterization. Our results emphasize the prominent role of transition metal oxygen covalency in perovskite electrocatalysts and introduce a bilayer approach to fine-tune the surface electronic structure [1]. [1] L. Heymann, M. L. Weber, M. Wohlgemuth, M. Risch, R. Dittmann, C. Baeumer, F. Gunkel (2022) Separating the Effects of Band Bending and Covalency in Hybrid Perovskite Oxide Electrocatalyst Bilayers for Water Electrolysis, ACS Appl. Mater. Interfaces [2] M. Wohlgemuth, M. L. Weber, L. Heymann, C. Baeumer, F. Gunkel (2022) Activity-Stability Relationships in Oxide Electrocatalysts for Water Electrolysis, Front. Chem. [3] M. L. Weber, G. Lole, A. Kormanyos, A. Schwiers, L. Heymann, F. D. Speck, T. Meyer, R. Dittmann, S. Cherevko, C. Jooss, C. Baeumer, F. Gunkel, (2022) Atomistic Insights into Activation and Degradation of La0.6Sr0.4CoO3-δ Electrocatalysts under Oxygen Evolution Conditions Figure 1