Jaymin C. Shah
Research Subjects
Jaymin C. Shah has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Abu Zayed Md Badruddoza
Pharmaceutical Sciences Small Molecule, Pfizer Worldwide Research and Development, Groton, CT 06340, USA
2 shared publications - Annie Bao Hua Wong
Institute of Sustainability for Chemicals, Energy and Environment, Agency for Science, Technology and Research (A*STAR), 1 Pesek Road, Jurong Island, Singapore 627833, Singapore
2 shared publications - Chetan Kantilal Yagnik
Institute of Sustainability for Chemicals, Energy and Environment, Agency for Science, Technology and Research (A*STAR), 1 Pesek Road, Jurong Island, Singapore 627833, Singapore
2 shared publications - Febin Cyriac
Institute of Sustainability for Chemicals, Energy and Environment, Agency for Science, Technology and Research (A*STAR), 1 Pesek Road, Jurong Island, Singapore 627833, Singapore
2 shared publications - Guan Wang
Institute of Sustainability for Chemicals, Energy and Environment, Agency for Science, Technology and Research (A*STAR), 1 Pesek Road, Jurong Island, Singapore 627833, Singapore
2 shared publications - Pui Shan Chow
Institute of Sustainability for Chemicals, Energy and Environment, Agency for Science, Technology and Research (A*STAR), 1 Pesek Road, Jurong Island, Singapore 627833, Singapore
2 shared publications
Latest Publications
- Open Access
- 6 June 2024
- Published by MDPI AG in Pharmaceutics
- Vol. 16 (6) , 773
The Effect of Process Parameters on the Microstructure, Stability, and Sensorial Properties of an Emulsion Cream Formulation
A classical emulsion formulation based on petrolatum and mineral oil as the internal phase with emulsifier wax as a typical topical emulsion cream was investigated for the effect of process parameters on drug product quality and performance attributes. The Initial Design of Experiment (DoE) suggested that an oil phase above 15%, coupled with less than 10% emulsifying wax, resulted in less stable emulsions. Different processing parameters such as homogenization speed, duration, cooling rate, and final temperature showed minimal influence on properties and failed to improve stability. The final DoE suggested that the optimal emulsion stability was achieved by introducing a holding period midway through the cooling stage after solvent addition. Within the studied holding temperature range (25–35 °C), a higher holding temperature correlated with increased emulsion stability. However, the application of shear during the holding period, using a paddle mixer, adversely affected stability by disrupting the emulsion microstructure. IVRT studies revealed that the release of lidocaine was higher in the most stable emulsion produced at a holding temperature of 35 °C compared to the least stable emulsion produced at a holding temperature of 25 °C. This suggests that a holding temperature of 35 °C improves both the stability and active release performance. It appears that a slightly higher holding temperature, 35 °C, allows a more flexible and stable emulsifying agent film around the droplets facilitating stabilization of the emulsion. This study offers valuable insights into the relationship between process parameters at various stages of manufacture, microstructure, and various quality attributes of emulsion cream systems. The knowledge gained will facilitate improved design and optimization of robust manufacturing processes, ensuring the production of the formulations with the desired critical quality attributes.
- 6 June 2024
- Published by MDPI AG in Pharmaceutics
- Vol. 16 (6) , 773
Open AccessThe Effect of Process Parameters on the Microstructure, Stability, and Sensorial Properties of an Emulsion Cream Formulation
A classical emulsion formulation based on petrolatum and mineral oil as the internal phase with emulsifier wax as a typical topical emulsion cream was investigated for the effect of process parameters on drug product quality and performance attributes. The Initial Design of Experiment (DoE) suggested that an oil phase above 15%, coupled with less than 10% emulsifying wax, resulted in less stable emulsions. Different processing parameters such as homogenization speed, duration, cooling rate, and final temperature showed minimal influence on properties and failed to improve stability. The final DoE suggested that the optimal emulsion stability was achieved by introducing a holding period midway through the cooling stage after solvent addition. Within the studied holding temperature range (25–35 °C), a higher holding temperature correlated with increased emulsion stability. However, the application of shear during the holding period, using a paddle mixer, adversely affected stability by disrupting the emulsion microstructure. IVRT studies revealed that the release of lidocaine was higher in the most stable emulsion produced at a holding temperature of 35 °C compared to the least stable emulsion produced at a holding temperature of 25 °C. This suggests that a holding temperature of 35 °C improves both the stability and active release performance. It appears that a slightly higher holding temperature, 35 °C, allows a more flexible and stable emulsifying agent film around the droplets facilitating stabilization of the emulsion. This study offers valuable insights into the relationship between process parameters at various stages of manufacture, microstructure, and various quality attributes of emulsion cream systems. The knowledge gained will facilitate improved design and optimization of robust manufacturing processes, ensuring the production of the formulations with the desired critical quality attributes.
- Open Access
- 28 August 2023
- Published by MDPI AG in Pharmaceutics
- Vol. 15 (9) , 2219
Influence of Manufacturing Process on the Microstructure, Stability, and Sensorial Properties of a Topical Ointment Formulation
The manufacturing process for ointments typically involves a series of heating, cooling, and mixing steps. Precise control of the level of mixing through homogenization and the cooling rate, as well as temperature at different stages, is important in delivering ointments with the desired quality attributes, stability, and performance. In this work, we investigated the influence of typical plant processing conditions on the microstructure, stability, and sensorial properties of a model ointment system through a Design of Experiments (DoE) approach. Homogenization speed at the cooling stage after the addition of the solvent (propylene glycol, PG) was found to be the critical processing parameter that affects stability and the rheological and sensorial properties of the ointment. A lower PG addition temperature was also found to be beneficial. The stabilization of the ointment at a lower PG addition temperature was hypothesized to be due to more effective encapsulation by crystallizing mono- and diglycerides at the lower temperature. The in vitro release profiles were found to be not influenced by the processing parameters, suggesting that for the ointment platform studied, processing affects the microstructure, but the effects do not translate into the release profile, a key performance indicator. Our systematic study represents a Quality-by-Design (QbD) approach to the design of a robust manufacturing process for delivering stable ointments with the desired performance attributes and properties.
- 28 August 2023
- Published by MDPI AG in Pharmaceutics
- Vol. 15 (9) , 2219
Open AccessInfluence of Manufacturing Process on the Microstructure, Stability, and Sensorial Properties of a Topical Ointment Formulation
The manufacturing process for ointments typically involves a series of heating, cooling, and mixing steps. Precise control of the level of mixing through homogenization and the cooling rate, as well as temperature at different stages, is important in delivering ointments with the desired quality attributes, stability, and performance. In this work, we investigated the influence of typical plant processing conditions on the microstructure, stability, and sensorial properties of a model ointment system through a Design of Experiments (DoE) approach. Homogenization speed at the cooling stage after the addition of the solvent (propylene glycol, PG) was found to be the critical processing parameter that affects stability and the rheological and sensorial properties of the ointment. A lower PG addition temperature was also found to be beneficial. The stabilization of the ointment at a lower PG addition temperature was hypothesized to be due to more effective encapsulation by crystallizing mono- and diglycerides at the lower temperature. The in vitro release profiles were found to be not influenced by the processing parameters, suggesting that for the ointment platform studied, processing affects the microstructure, but the effects do not translate into the release profile, a key performance indicator. Our systematic study represents a Quality-by-Design (QbD) approach to the design of a robust manufacturing process for delivering stable ointments with the desired performance attributes and properties.
- 7 July 2022
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 38 (28) , 8502-8512
Crystallization and Rheology of Mono- and Diglycerides and Their Role in Stabilization of Emulsion Droplets in Model Topical Ointments
The crystallization behavior of commercial mono-and diglycerides (MDG) in paraffin oil is studied to develop an in-depth understanding of the polymorphic transitions useful for the physical stability of petroleum oil-based topical emulsions. Optical microscopy and differential scanning calorimetry measurements showed the formation of plate-like and spherulite crystals at high and low temperatures, in sequence, while cooling a solution of MDG dissolved in oil. High-resolution NMR and X-ray scattering demonstrate that 1-monoglycerides (mixture of 1-glyceride monostearate and 1-glyceride monopalmitate) cocrystallize to an inverse-lamellar structure (L alpha polymorph) that mainly forms plate-like crystals at a higher temperature. The L alpha polymorph is seen to exist up to room temperature during the cooling process. At lower temperatures, 1,3-diglycerides (mixture of 1,3-glyceryl distearate and 1,3-glyceryl dipalmitate) crystallize into beta-polymorphs that form spherulites. The spherulites tend to assemble into elongated strands via aggregation, leading to the formation of a percolating network structure. The sizes of both types of crystals decrease with an increasing cooling rate, leading to a higher mechanical modulus due to the increased network connectivity of spherulites. In an emulsion, monoglycerides in the form of L alpha polymorphs having plate-like crystal morphology show a higher affinity to the polar liquid/oil interface, thereby providing better interfacial stability compared to the spherulitic beta-polymorphs. However, diglycerides in the form of spherulites form bulk network structures which provide network stabilization to the suspended droplets. This work demonstrates that MDG, a commercially available ingredient that combines the differential functionality of monoglycerides and diglycerides, is an effective, bifunctional, emulsifying agent for petrolatum-based topical emulsions.
- 7 July 2022
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 38 (28) , 8502-8512
Crystallization and Rheology of Mono- and Diglycerides and Their Role in Stabilization of Emulsion Droplets in Model Topical Ointments
The crystallization behavior of commercial mono-and diglycerides (MDG) in paraffin oil is studied to develop an in-depth understanding of the polymorphic transitions useful for the physical stability of petroleum oil-based topical emulsions. Optical microscopy and differential scanning calorimetry measurements showed the formation of plate-like and spherulite crystals at high and low temperatures, in sequence, while cooling a solution of MDG dissolved in oil. High-resolution NMR and X-ray scattering demonstrate that 1-monoglycerides (mixture of 1-glyceride monostearate and 1-glyceride monopalmitate) cocrystallize to an inverse-lamellar structure (L alpha polymorph) that mainly forms plate-like crystals at a higher temperature. The L alpha polymorph is seen to exist up to room temperature during the cooling process. At lower temperatures, 1,3-diglycerides (mixture of 1,3-glyceryl distearate and 1,3-glyceryl dipalmitate) crystallize into beta-polymorphs that form spherulites. The spherulites tend to assemble into elongated strands via aggregation, leading to the formation of a percolating network structure. The sizes of both types of crystals decrease with an increasing cooling rate, leading to a higher mechanical modulus due to the increased network connectivity of spherulites. In an emulsion, monoglycerides in the form of L alpha polymorphs having plate-like crystal morphology show a higher affinity to the polar liquid/oil interface, thereby providing better interfacial stability compared to the spherulitic beta-polymorphs. However, diglycerides in the form of spherulites form bulk network structures which provide network stabilization to the suspended droplets. This work demonstrates that MDG, a commercially available ingredient that combines the differential functionality of monoglycerides and diglycerides, is an effective, bifunctional, emulsifying agent for petrolatum-based topical emulsions.
- 16 March 2022
- Published by Springer Nature in The AAPS Journal
- Vol. 24 (3) , 1-16
Model for Long Acting Injectables (Depot Formulation) Based on Pharmacokinetics and Physical Chemical Properties
The objective was to develop a model to a priori identify the most suitable depot technology for a candidate based upon its therapeutic index (TI), pharmac
- 16 March 2022
- Published by Springer Nature in The AAPS Journal
- Vol. 24 (3) , 1-16
Model for Long Acting Injectables (Depot Formulation) Based on Pharmacokinetics and Physical Chemical Properties
The objective was to develop a model to a priori identify the most suitable depot technology for a candidate based upon its therapeutic index (TI), pharmac