Sayandeep Banerjee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sayandeep Banerjee has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
Virendra Rana
5 shared publicationsGoutam Sarkar
CGM Government College
3 shared publications- Sayan Maity
Centre of Advanced Study in Geology Banaras Hindu University Varanasi 221 005 India bhu.ac.in
3 shared publications Arkoprovo Biswas
Department of Geology, Banaras Hindu University 2 , Varanasi - 221 005, India
2 shared publications- Asha Borgohain2 shared publications
- Ashish Rawat
Department of Geology, Hemvati Nandan Bahuguna Garhwal University, Srinagar Garhwal, India
2 shared publications
Latest Publications
- Open Access
- 17 April 2026
- Published by Cambridge University Press (CUP) in Geological Magazine
- Vol. 163
The tectonic and kinematic evolution of an intra-terrane shear zone – the case of North Purulia Shear Zone and its relation to Rodinia assembly
Intra-terrane shear zones (ITSZs), though widespread across Proterozoic mobile belts, remain underexplored in their structural evolution and tectonic significance. This study explores the anatomy of the North Purulia Shear Zone (NPSZ), a ∼E–W trending, steeply dipping ITSZ within the Chotanagpur Granite Gneiss Complex (CGGC), eastern India. Integrated structural, kinematic, anisotropy of magnetic susceptibility (AMS) and microstructural analyses reveal that the NPSZ nucleated within megacrystic granite gneiss during late-Grenvillian tectonism (∼0.9–1.1 Ga), contemporaneous with Rodinia assembly. Field and AMS data demonstrate a sub-simple shear regime with a sinistral strike-slip component and magnetic fabrics transition from mixed oblate–prolate in host gneiss to only oblate in mylonitic zones. Recrystallized quartz grain aspect ratios increase significantly toward the core, coupled with elevated strain rates and decreasing flow stress. Deformation temperatures inferred from microstructural observation coupled with quartz dynamic recrystallization mechanisms suggest dominance of dislocation creep, which implies that the shearing took place at deep crustal level. The absence of precursor fractures or dykes and alignment of feldspar megacrysts suggest that the nucleation of the NPSZ was facilitated by anisotropy produced by the magmatic/sub-magmatic gneissic fabric, where interstitial smaller-sized quartz-rich domains in between K-feldspar megacrysts acted as viscous pathways. These findings not only provide first-order insights into ITSZ nucleation mechanisms but also reaffirm the CGGC as a site of late-Grenvillian crustal thickening related to the suturing of North and South Indian cratons during Rodinia amalgamation. The NPSZ thus emerges as a key intra-terrane tectonic structure recording Rodinia-linked crustal reworking within the Indian shield.
- 17 April 2026
- Published by Cambridge University Press (CUP) in Geological Magazine
- Vol. 163
Open AccessThe tectonic and kinematic evolution of an intra-terrane shear zone – the case of North Purulia Shear Zone and its relation to Rodinia assembly
Intra-terrane shear zones (ITSZs), though widespread across Proterozoic mobile belts, remain underexplored in their structural evolution and tectonic significance. This study explores the anatomy of the North Purulia Shear Zone (NPSZ), a ∼E–W trending, steeply dipping ITSZ within the Chotanagpur Granite Gneiss Complex (CGGC), eastern India. Integrated structural, kinematic, anisotropy of magnetic susceptibility (AMS) and microstructural analyses reveal that the NPSZ nucleated within megacrystic granite gneiss during late-Grenvillian tectonism (∼0.9–1.1 Ga), contemporaneous with Rodinia assembly. Field and AMS data demonstrate a sub-simple shear regime with a sinistral strike-slip component and magnetic fabrics transition from mixed oblate–prolate in host gneiss to only oblate in mylonitic zones. Recrystallized quartz grain aspect ratios increase significantly toward the core, coupled with elevated strain rates and decreasing flow stress. Deformation temperatures inferred from microstructural observation coupled with quartz dynamic recrystallization mechanisms suggest dominance of dislocation creep, which implies that the shearing took place at deep crustal level. The absence of precursor fractures or dykes and alignment of feldspar megacrysts suggest that the nucleation of the NPSZ was facilitated by anisotropy produced by the magmatic/sub-magmatic gneissic fabric, where interstitial smaller-sized quartz-rich domains in between K-feldspar megacrysts acted as viscous pathways. These findings not only provide first-order insights into ITSZ nucleation mechanisms but also reaffirm the CGGC as a site of late-Grenvillian crustal thickening related to the suturing of North and South Indian cratons during Rodinia amalgamation. The NPSZ thus emerges as a key intra-terrane tectonic structure recording Rodinia-linked crustal reworking within the Indian shield.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Magnetic Fabric Analysis of Sheared Rocks along the Alaknanda-Dhauliganga Valley: Insights into the Structural Deformation and Evolution of the Main Central Thrust in the Himalayan Region
Magnetic fabrics derived from the anisotropy of magnetic susceptibility (AMS) depict the preferred alignment of grains and crystal lattices in minerals contributing to magnetic susceptibility. These fabrics serve as reliable indicators of strain in deformed terrains. Early research primarily focused on rocks lacking visible fabrics, such as granites and quartzites. However, there has been a recent surge in the application of magnetic fabric analysis to Himalayan rocks, particularly for insights into tectonic activity. In the present study, structural and magnetic data along the Alaknanda-Dhauliganga valley is presented majorly focusing on the sheared rocks of the MCTz. The aim of the present work is to elucidate the utility of magnetic fabrics in resolving the ambiguity of the MCT, distinguishing between the Munsiari Thrust (MCT-I) and Vaikrita Thrust (MCT-II). The analysis shows a gradual change in compactional oblate fabric along with the parallel alignment of thrust-induced magnetic fabrics, reflecting its geometry and proximity to intense deformation zones. Here, a notable change in the degree of anisotropy (Pj) is also observed as the rocks transition towards the thrust zones. This transition is accompanied by a shift to a quantitatively more prolate fabric, indicating a change in nature of strain. The study observes an anisotropy degree (Pj) ranging from 1.1 to 3.2, with mostly positive shape parameter (T), except near MCT where negative values are noted. Additionally, we also investigate contributors of magnetic fabric by estimating the mean magnetic susceptibility (Km) for all the samples and cross-verify the results with petrographic and magneto-mineralogy studies. Vibrating Sample Magnetometry (VSM) was also employed to identify magnetic carrier types. This study also shows a strong correlation between macroscopic features and magnetic fabrics indicating dominance of structural deformation (independent of magnetic mineral assemblages) in the region. In conclusion, the study highlights that strain within the studied area varies with distance from areas of intense deformation, and these variations are distinctly characterized by changes in magnetic fabrics.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessMagnetic Fabric Analysis of Sheared Rocks along the Alaknanda-Dhauliganga Valley: Insights into the Structural Deformation and Evolution of the Main Central Thrust in the Himalayan Region
Magnetic fabrics derived from the anisotropy of magnetic susceptibility (AMS) depict the preferred alignment of grains and crystal lattices in minerals contributing to magnetic susceptibility. These fabrics serve as reliable indicators of strain in deformed terrains. Early research primarily focused on rocks lacking visible fabrics, such as granites and quartzites. However, there has been a recent surge in the application of magnetic fabric analysis to Himalayan rocks, particularly for insights into tectonic activity. In the present study, structural and magnetic data along the Alaknanda-Dhauliganga valley is presented majorly focusing on the sheared rocks of the MCTz. The aim of the present work is to elucidate the utility of magnetic fabrics in resolving the ambiguity of the MCT, distinguishing between the Munsiari Thrust (MCT-I) and Vaikrita Thrust (MCT-II). The analysis shows a gradual change in compactional oblate fabric along with the parallel alignment of thrust-induced magnetic fabrics, reflecting its geometry and proximity to intense deformation zones. Here, a notable change in the degree of anisotropy (Pj) is also observed as the rocks transition towards the thrust zones. This transition is accompanied by a shift to a quantitatively more prolate fabric, indicating a change in nature of strain. The study observes an anisotropy degree (Pj) ranging from 1.1 to 3.2, with mostly positive shape parameter (T), except near MCT where negative values are noted. Additionally, we also investigate contributors of magnetic fabric by estimating the mean magnetic susceptibility (Km) for all the samples and cross-verify the results with petrographic and magneto-mineralogy studies. Vibrating Sample Magnetometry (VSM) was also employed to identify magnetic carrier types. This study also shows a strong correlation between macroscopic features and magnetic fabrics indicating dominance of structural deformation (independent of magnetic mineral assemblages) in the region. In conclusion, the study highlights that strain within the studied area varies with distance from areas of intense deformation, and these variations are distinctly characterized by changes in magnetic fabrics.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Fissure-Driven Volcanic Processes in the Deccan Province arising from Shallow Subcrustal Magma Chambers: conclusions derived from the magnetic fabric examination of the Pachmarhi Dyke Swarm
The Deccan Continental flood basalts (DCFB) are associated with three major dyke swarms: the Narmada-Satpura-Tapi (N-S-T), the Western Coastal and the Nasik-Pune dyke swarm. The DCFB around Pachmarhi is characterized by a lower Magnesium number (Mg#) and higher TiO2 content, suggesting more evolved Deccan basalts compared to others. Approximately 244 mappable doleritic and basaltic dykes around Pachmarhi, located in the eastern part of the N-S-T dykes within the DCFB, have lengths ranging from 140 m to 22 km, with a mean of ~5.15 km. The Pachmarhi dyke swarms exhibit emplacement within preexisting fractures, with a discernible preferred orientation aligning at ~N82°E, roughly following an ~E-W trending trajectory. This alignment corresponds to the general trend of the Narmada-Son lineament (NSL) and is perpendicular to the direction of the minimum horizontal stress (σ3). This σ3 direction aligns with the ~N-S trending paleoextension during the period of dyke emplacement. Selected dykes in Pachmarhi have been studied using the Anisotropy of Magnetic Susceptibility (AMS) technique. The primary aim is to determine the direction and sense of magma flow within the dykes, providing insights into the depth, number, and spatial distribution of magma chambers and their potential association with the mantle plume. The Rock magnetic studies on the Pachmarhi dykes have unveiled the presence of high-titanium magnetite particles, predominantly of Pseudo-Single Domain (PSD) nature, with a lesser proportion of Multi-Domain (MD) grains.To ascertain the direction and sense of magma flow in dyke margins with oblate fabric, the imbrication of the magnetic foliation plane (dip and strike of the K1-K2 plane) has been employed. For dyke margins exhibiting prolate fabric, the imbrication of the magnetic lineation (plunge of the K1 axis) has been utilized. However, in cases where one dyke margin features an oblate ellipsoid and the other a prolate ellipsoid, the imbrication of the magnetic foliation is used for the former, while the imbrication of the magnetic lineation is used for the latter. This thorough analysis has revealed multiple trends of magma flow ranging from vertical/sub-vertical to inclined suggesting that most of the dykes were close to the magma sources, with just a single dyke exhibiting a sub-horizontal flow pattern, based on the angle measurements from the horizontal.The intersection of imbrication within the margins of each dyke provides valuable information about the flow geometry of the area, suggesting the presence of multiple shallow subcrustal magma chambers. This finding aligns with earlier confirmations through structural attributes (length and thickness of dykes) by quantifying the magmatic overpressure and the source depth of the magma chamber of the Pachmarhi dykes and Nandurbar-Dhule dykes. The multiple trends of flow indicate a polycentric flow pattern for the Pachmarhi dykes, similar to the Nandurbar-Dhule dyke swarms in the western region of the N-S-T dykes. Consequently, it can be inferred that the emplacement of dykes in the NSL region was primarily facilitated by a "polycentric flow" mechanism through sub-crustal magma chambers, whereby magma was injected through crustal fissures, resulting in a significant volume of magma being generated in the DCFB.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessFissure-Driven Volcanic Processes in the Deccan Province arising from Shallow Subcrustal Magma Chambers: conclusions derived from the magnetic fabric examination of the Pachmarhi Dyke Swarm
The Deccan Continental flood basalts (DCFB) are associated with three major dyke swarms: the Narmada-Satpura-Tapi (N-S-T), the Western Coastal and the Nasik-Pune dyke swarm. The DCFB around Pachmarhi is characterized by a lower Magnesium number (Mg#) and higher TiO2 content, suggesting more evolved Deccan basalts compared to others. Approximately 244 mappable doleritic and basaltic dykes around Pachmarhi, located in the eastern part of the N-S-T dykes within the DCFB, have lengths ranging from 140 m to 22 km, with a mean of ~5.15 km. The Pachmarhi dyke swarms exhibit emplacement within preexisting fractures, with a discernible preferred orientation aligning at ~N82°E, roughly following an ~E-W trending trajectory. This alignment corresponds to the general trend of the Narmada-Son lineament (NSL) and is perpendicular to the direction of the minimum horizontal stress (σ3). This σ3 direction aligns with the ~N-S trending paleoextension during the period of dyke emplacement. Selected dykes in Pachmarhi have been studied using the Anisotropy of Magnetic Susceptibility (AMS) technique. The primary aim is to determine the direction and sense of magma flow within the dykes, providing insights into the depth, number, and spatial distribution of magma chambers and their potential association with the mantle plume. The Rock magnetic studies on the Pachmarhi dykes have unveiled the presence of high-titanium magnetite particles, predominantly of Pseudo-Single Domain (PSD) nature, with a lesser proportion of Multi-Domain (MD) grains.To ascertain the direction and sense of magma flow in dyke margins with oblate fabric, the imbrication of the magnetic foliation plane (dip and strike of the K1-K2 plane) has been employed. For dyke margins exhibiting prolate fabric, the imbrication of the magnetic lineation (plunge of the K1 axis) has been utilized. However, in cases where one dyke margin features an oblate ellipsoid and the other a prolate ellipsoid, the imbrication of the magnetic foliation is used for the former, while the imbrication of the magnetic lineation is used for the latter. This thorough analysis has revealed multiple trends of magma flow ranging from vertical/sub-vertical to inclined suggesting that most of the dykes were close to the magma sources, with just a single dyke exhibiting a sub-horizontal flow pattern, based on the angle measurements from the horizontal.The intersection of imbrication within the margins of each dyke provides valuable information about the flow geometry of the area, suggesting the presence of multiple shallow subcrustal magma chambers. This finding aligns with earlier confirmations through structural attributes (length and thickness of dykes) by quantifying the magmatic overpressure and the source depth of the magma chamber of the Pachmarhi dykes and Nandurbar-Dhule dykes. The multiple trends of flow indicate a polycentric flow pattern for the Pachmarhi dykes, similar to the Nandurbar-Dhule dyke swarms in the western region of the N-S-T dykes. Consequently, it can be inferred that the emplacement of dykes in the NSL region was primarily facilitated by a "polycentric flow" mechanism through sub-crustal magma chambers, whereby magma was injected through crustal fissures, resulting in a significant volume of magma being generated in the DCFB.
- Open Access
- 10 January 2024
- Published by Cambridge University Press (CUP) in Geological Magazine
- Vol. 160 (10) , 1-21
Contextual relationship between mechanical heterogeneity and dyking: constraints from magma emplacement dynamics of the ca. 2.21 Ga Anantapur–Kunigal mafic dyke swarm, Dharwar Craton, India
Mafic dykes are typically emplaced through primary hydraulic fracturing of undeformed crust or may make use of pre-existing crustal inhomogeneities, representing the plumbing systems of a large igneous province. The Eastern Dharwar Craton has dense exposures of several generations of Paleoproterozoic mafic dyke swarms ranging from ca. 2.37 Ga to ca. 1.79 Ga. Herein, using anisotropy of magnetic susceptibility fabric data of mafic dykes and associated host granites, the emplacement systematics of the NW- to W-trending ca. 2.21 Ga Anantapur–Kunigal dyke swarm, displaying a radiating geometry, have been studied to understand magma flow dynamics. A low-angle relationship between the silicate and opaque fabrics and good correlation with magnetic lineation, identified via petrographic studies and shape preferred orientation analyses of multiple oriented thin sections, suggest a primary flow-related magnetic anisotropy for the studied dyke samples. The classic subparallel relationship between the trend of the dyke planes and magnetic fabric of the associated host granites suggests that the radiating geometry of the ca. 2.21 Ga dyke swarm was supported by a favourable pre-existing structural grain of the country rock. We interpret the magma for the studied dyke swarm was fed laterally from a distant plume. It was emplaced as laterally propagating primary dyke fractures as well as injected into the pre-existing subparallel crustal inhomogeneities. Corroborating all these inferences, a detailed emplacement model for ca. 2.21 Ga Anantapur–Kunigal dyke swarm is also proposed.
- 10 January 2024
- Published by Cambridge University Press (CUP) in Geological Magazine
- Vol. 160 (10) , 1-21
Open AccessContextual relationship between mechanical heterogeneity and dyking: constraints from magma emplacement dynamics of the ca. 2.21 Ga Anantapur–Kunigal mafic dyke swarm, Dharwar Craton, India
Mafic dykes are typically emplaced through primary hydraulic fracturing of undeformed crust or may make use of pre-existing crustal inhomogeneities, representing the plumbing systems of a large igneous province. The Eastern Dharwar Craton has dense exposures of several generations of Paleoproterozoic mafic dyke swarms ranging from ca. 2.37 Ga to ca. 1.79 Ga. Herein, using anisotropy of magnetic susceptibility fabric data of mafic dykes and associated host granites, the emplacement systematics of the NW- to W-trending ca. 2.21 Ga Anantapur–Kunigal dyke swarm, displaying a radiating geometry, have been studied to understand magma flow dynamics. A low-angle relationship between the silicate and opaque fabrics and good correlation with magnetic lineation, identified via petrographic studies and shape preferred orientation analyses of multiple oriented thin sections, suggest a primary flow-related magnetic anisotropy for the studied dyke samples. The classic subparallel relationship between the trend of the dyke planes and magnetic fabric of the associated host granites suggests that the radiating geometry of the ca. 2.21 Ga dyke swarm was supported by a favourable pre-existing structural grain of the country rock. We interpret the magma for the studied dyke swarm was fed laterally from a distant plume. It was emplaced as laterally propagating primary dyke fractures as well as injected into the pre-existing subparallel crustal inhomogeneities. Corroborating all these inferences, a detailed emplacement model for ca. 2.21 Ga Anantapur–Kunigal dyke swarm is also proposed.
- Open Access
- 15 May 2023
- Published by Copernicus GmbH
Deciphering the variation of magnetic fabric intensity across the Main Central Thrust in Garhwal Himalayas
One of the key aspects of understanding the rapid exhumation of Himalayan core, is to understand the variation of deformation intensity occurring along the major tectonic unit i.e., the Main Central Thrust (MCT). Quantification of magnetic fabrics, derived from analysis of anisotropy of magnetic susceptibility (AMS), defines the strain path in the form of an ellipsoid and provides a rich source of information on the structural evolution of rocks throughout the MCT. The approach of this study is to integrate field and AMS parameters, where field foliation from 73 planes has orientation trending NW-SE with a moderate dip of about 600 (best fit great circle) The magnetic foliation is found to be parallel to the field foliation. Variation in orientation direction of magnetic lineation implies the dominance of superposed folding in the study area. The degree of anisotropy (Pj), which quantifies the intensity of preferred orientation of magnetic minerals show values ranging from 1.1 to 1.8. The AMS study reveals that the shape parameter(T) of susceptibility ellipsoid, in most of the samples are positive representing an oblate ellipsoid. To be more precise, this study reflects the inter-relationship between field structures, superposed folding, magnetic fabric parameters to understand the exhumation of Himalayan core.
- 15 May 2023
- Published by Copernicus GmbH
Open AccessDeciphering the variation of magnetic fabric intensity across the Main Central Thrust in Garhwal Himalayas
One of the key aspects of understanding the rapid exhumation of Himalayan core, is to understand the variation of deformation intensity occurring along the major tectonic unit i.e., the Main Central Thrust (MCT). Quantification of magnetic fabrics, derived from analysis of anisotropy of magnetic susceptibility (AMS), defines the strain path in the form of an ellipsoid and provides a rich source of information on the structural evolution of rocks throughout the MCT. The approach of this study is to integrate field and AMS parameters, where field foliation from 73 planes has orientation trending NW-SE with a moderate dip of about 600 (best fit great circle) The magnetic foliation is found to be parallel to the field foliation. Variation in orientation direction of magnetic lineation implies the dominance of superposed folding in the study area. The degree of anisotropy (Pj), which quantifies the intensity of preferred orientation of magnetic minerals show values ranging from 1.1 to 1.8. The AMS study reveals that the shape parameter(T) of susceptibility ellipsoid, in most of the samples are positive representing an oblate ellipsoid. To be more precise, this study reflects the inter-relationship between field structures, superposed folding, magnetic fabric parameters to understand the exhumation of Himalayan core.
- 1 December 2022
- Published by Geological Society of India in Journal of the Geological Society of India
- Vol. 98 (12) , 1771-1772
Report on 7th Rock Deformation and Structures (RDS 7) Conference and Field Workshop held at the Department of Geology, Banaras Hindu University, Varanasi
- 1 December 2022
- Published by Geological Society of India in Journal of the Geological Society of India
- Vol. 98 (12) , 1771-1772
Report on 7th Rock Deformation and Structures (RDS 7) Conference and Field Workshop held at the Department of Geology, Banaras Hindu University, Varanasi
- 9 June 2022
- Published by Wiley in Geological Journal
- Vol. 57 (10) , 3973-3987
The origin and localization of “vermiculite” along the intra‐terrane shear zones in the Bundelkhand Craton, India: Mechanism and implication
Vermiculite, a clay mineral of economic importance, is reported for the first time from the Bundelkhand Craton. The locales of the vermiculite occurrence are mapped within the Bundelkhand granitoids at several places. The identification of the fracture system and the zones of strain localization within Bundelkhand granitoids are critical for targeting the occurrences of vermiculite. A range of studies including meso‐, micro‐, and sub‐microscopic analyses were used to delineate the characteristic features of vermiculite along the brittle/ductile shear zones in the Bundelkhand Craton. SEM‐based EDS, EPMA, and XRD analyses confirm the ubiquitous dominance of vermiculite as fracture infills and/or channel infill materials along the zones of nucleation of ductile shear zones. It is postulated here that the occurrence of vermiculite is a result of supergene alteration of biotite present in the vein material. The parent material of the fracture infills from which the veins crystallized is genetically derived from the host rock (Bundelkhand granitoid), which later healed the fractures and prompted the nucleation of ductile shear zones in the Bundelkhand Craton.
- 9 June 2022
- Published by Wiley in Geological Journal
- Vol. 57 (10) , 3973-3987
The origin and localization of “vermiculite” along the intra‐terrane shear zones in the Bundelkhand Craton, India: Mechanism and implication
Vermiculite, a clay mineral of economic importance, is reported for the first time from the Bundelkhand Craton. The locales of the vermiculite occurrence are mapped within the Bundelkhand granitoids at several places. The identification of the fracture system and the zones of strain localization within Bundelkhand granitoids are critical for targeting the occurrences of vermiculite. A range of studies including meso‐, micro‐, and sub‐microscopic analyses were used to delineate the characteristic features of vermiculite along the brittle/ductile shear zones in the Bundelkhand Craton. SEM‐based EDS, EPMA, and XRD analyses confirm the ubiquitous dominance of vermiculite as fracture infills and/or channel infill materials along the zones of nucleation of ductile shear zones. It is postulated here that the occurrence of vermiculite is a result of supergene alteration of biotite present in the vein material. The parent material of the fracture infills from which the veins crystallized is genetically derived from the host rock (Bundelkhand granitoid), which later healed the fractures and prompted the nucleation of ductile shear zones in the Bundelkhand Craton.
- 4 June 2022
- Published by Springer Nature in Landslides
- Vol. 19 (10) , 2347-2365
Detecting slow-moving landslides in parts of Darjeeling–Sikkim Himalaya, NE India: quantitative constraints from PSInSAR and its relation to the structural discontinuities
- 4 June 2022
- Published by Springer Nature in Landslides
- Vol. 19 (10) , 2347-2365
Detecting slow-moving landslides in parts of Darjeeling–Sikkim Himalaya, NE India: quantitative constraints from PSInSAR and its relation to the structural discontinuities